OpenRAM/docs/source/design_modules.md

Go Back

Hierarchical Design Modules

This page of the documentation explains the hierarchical design modules of OpenRAM.

Table of Contents

1. Hierarchical Design Modules
2. Bank
3. Port Data
4. Port Address
5. Plain Bitcell Array
6. Variations of Bitcells Needed
7. Replica Bitcell Array
8. 1D Arrays
9. 2D Arrays
10. Delay Line
11. Hierarchical (Address) Decoder

Hierarchical Design Modules

• Memory building blocks
  • SRAM, Bank, Control Logic, Decoders, Column Mux, Various arrays (DFF, drivers)
  • Can override every module with a custom one in the configuration file
• Each module must:
  • Create netlist
    • Define inputs/outputs
    • Instantiate and connect sub-modules and cells
  • Create layout
    • Place and route itself
    • Route vdd/gnd to M3
    • (Optional) Run DRC/LVS
  • Analytically model timing and power

Bank

• Encompasses everything except
  • Data and Address Flops
  • Control logic
  • Multi-bank logic
• Arranges ports
  • Port 0 is left/bottom
  • Port 1 is right/top

Port Data

• Encapsulates all of the datapath logic for a rw, w, or r port
  • Sense amplifiers (read types)
  • Write drivers (write types)
  • Column mux (if any)
  • Precharge (read or write type) (write to not destroy half selected cells in a row)
• Also includes a precharge for the replica columns

Port Address

• Encapsulates the row decoder and wordline driver for easier placement next to a bank
• Each port will have its own port_address module

Plain Bitcell Array

• 2D Array of bit cells
  • Each row alternately flips vertically
• Assume bitcells tile
  • Boundary is determined by boundary layer in GDS
  • Word line must abut
  • Bit lines must abut

Variations of Bitcells Needed

• Normal bitcell for data storage
• Replica bitcell that is fixed to output a 0 value
• Dummy bitcell with bitlines disconnected (purely for wordline load and lithography regularity)

Replica Bitcell Array

• Bitcells: B=regular, D=dummy, R=replica
• Main bitcell array ( \color{green}{\textrm{green}} )
• Replica cols for each read port ( \color{skyblue}{\textrm{blue}} ) on left or right (any number)
• Dummy bitcells on the top, bottom, left, and right for lithography regularity ( \color{red}{\textrm{red}} )
• Replica columns activate two replica bitcells
  • \color{blue}{\textrm{One}} driven by replica wordline
  • \color{royalblue}{\textrm{Second}} driven by one of the normal wordlines (dark blue)
• Second port word and bit lines not shown
  • Would be on right and top

1D Arrays

• Several modules have 1D arrays:
  • sense_amp_array
  • write_driver_array
  • precharge_array
  • single_level_column_mux_array
  • tri_gate_array
  • wordline_driver (*should change name to _array)
• sense_amp_array, write_driver_array, tri_gate_array match column mux stride to space out
• Wish list: Allow wide sense amplifier array to use multiple rows of sense amplifiers.

2D Arrays

• Regular DFF arrays (dff_array.py)
• Buffered DFF arrays (dff_buf_array.py)
• Inverted DFF array (dff_inv_array.py)
• Can be 1*N or N*1 or M*N
  • Wish list: M*N routes pins to edges

Delay Line

• Configurable fanout and stages
  • [4,4,4] means 3 FO4 stages
  • [1,1,4,4] means 2 FO1 stages followed by FO4

Hierarchical (Address) Decoder

• Generic hierarchical_predecode class
  • Places routing rails and decode inverters
• Derived to implement multiple predecoders
  • hierarchical_predecode_2x4
  • hierarchical_predecode_3x8
  • hierarchical_predecode_4x16
• Hierarchical decoder uses predecoder + another decode stage
• Predecoders are also used for the column mux decode and bank select decode
• Wish list: Handle thin bitcell height