luke
/
OpenRAM
mirror of https://github.com/VLSIDA/OpenRAM.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Make control bus routing offset consistent

This commit is contained in:
Matt Guthaus 2019-07-23 09:39:28 -07:00
parent 864639d96e
commit 07401fc6ea
1 changed files with 4 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
compiler/modules/bank.py
View File

@ -174,7 +174,7 @@ class bank(design.design):
# The port address decoder/driver logic is placed on the right and mirrored on Y-axis.
# The port data write/sense/precharge/mux is placed on the top and mirrored on the X-axis.
self.bitcell_array_top = self.bitcell_array.height
self.bitcell_array_right = self.bitcell_array.width + self.m1_width + self.m2_gap
self.bitcell_array_right = self.bitcell_array.width
# These are the offsets of the main array (excluding dummy and replica rows/cols)
self.main_bitcell_array_top = self.bitcell_array.bitcell_array_inst.uy()
@ -249,7 +249,7 @@ class bank(design.design):
# LOWER RIGHT QUADRANT
# To the left of the bitcell array
x_offset = self.bitcell_array_right + self.port_address.width
x_offset = self.bitcell_array_right + self.port_address.width + self.m2_gap
self.port_address_offsets[port] = vector(x_offset,self.main_bitcell_array_bottom)
# UPPER RIGHT QUADRANT
@ -668,7 +668,7 @@ class bank(design.design):
# Port 0
# The bank is at (0,0), so this is to the left of the y-axis.
# 2 pitches on the right for vias/jogs to access the inputs
control_bus_offset = vector(-self.m2_pitch * self.num_control_lines[0] - self.m2_width, self.min_y_offset)
control_bus_offset = vector(-self.m2_pitch * self.num_control_lines[0] - self.m2_pitch, self.min_y_offset)
# The control bus is routed up to two pitches below the bitcell array
control_bus_length = self.main_bitcell_array_bottom - self.min_y_offset - 2*self.m1_pitch
self.bus_xoffset[0] = self.create_bus(layer="metal2",
@ -683,9 +683,8 @@ class bank(design.design):
if len(self.all_ports)==2:
# The other control bus is routed up to two pitches above the bitcell array
control_bus_length = self.max_y_offset - self.main_bitcell_array_top - 2*self.m1_pitch
control_bus_offset = vector(self.bitcell_array_right,
control_bus_offset = vector(self.bitcell_array_right + self.m2_pitch,
self.max_y_offset - control_bus_length)
# The bus for the right port is reversed so that the rbl_wl is closest to the array
self.bus_xoffset[1] = self.create_bus(layer="metal2",
pitch=self.m2_pitch,