Verilator should now correctly re-evaluate any logic that depends on
state set in a DPI exported function, including if the DPI export is
called outside eval, or if the DPI export is called from a DPI import.
Whenever the design contains a DPI exported function that sets a
non-local variable, we create a global __Vdpi_export_trigger flag, that
is set in the body of the DPI export, and make all variables set in any
DPI exported functions dependent on this flag (this ensures correct
ordering and change detection on state set in DPI exports when needed).
The DPI export trigger flag is cleared at the end of eval, which ensured
calls to DPI exports outside of eval are detected. Additionally the
ordering is modifies to assume that any call to a 'context' DPI import
might call DPI exports by adding an edge to the ordering graph from the
logic vertex containing the call to the DPI import to the DPI export
trigger variable vertex (note the standard does not allow calls to DPI
exports from DPI imports that were not imported with 'context', so we
do not enforce ordering on those).
All parameters that are required in the output are now emitted as
'static constexpr, except for string or array of strings parameters,
which are still emitted as 'static const' (required as std::string is
not a literal type, so cannot be constexpr). This simplifies handling
of parameters and supports 'real' parameters.
This patch partitions AstCFuncs under an AstNodeModule based on which
header files they require for their implementation, and emits them
into separate files based on the distinct dependency sets. This helps
with incremental recompilation of the output C++.
The -G option now correctly parses simple integer literals as signed
numbers, which is in line with the standard and is significant when
overriding parameters without a type specifier.
Fixes#3060
V3Simulate reuses allocated AstConst nodes for efficiency, however this
used to be implemented in a way that required a deep copy of a
std::unorderd_map<_, std::deque<_>>, which was quite inefficient when it
grew large. The free list is now managed without any copying. This takes
the V3Table pass from taking 12s to 0.2s on SweRV EH1.
We incorrectly treated two different struct types the same when passed
as an actual parameter to a `parameter type` parameter in an instance,
if the actual parameter expression both hash to the same value and the
structs have the same struct name. This is now corrected.
Fixes#3055.
This patch implements #3032. Verilator creates a module representing the
SystemVerilog $root scope (V3LinkLevel::wrapTop). Until now, this was
called the "TOP" module, which also acted as the user instantiated model
class. Syms used to hold a pointer to this root module, but hold
instances of any submodule. This patch renames this root scope module
from "TOP" to "$root", and introduces a separate model class which is
now an interface class. As the root module is no longer the user
interface class, it can now be made an instance of Syms, just like any
other submodule. This allows absolute references into the root module to
avoid an additional pointer indirection resulting in a potential speedup
(about 1.5% on OpenTitan). The model class now also contains all non
design specific generated code (e.g.: eval loops, trace config, etc),
which additionally simplifies Verilator internals.
Please see the updated documentation for the model interface changes.
Teach V3Localize how to localize variables that are used in multiple
functions, if in all functions where they are used, they are always
written in whole before being consumed. This allows a lot more variables
to be localized (+20k variables on OpenTitan - when building without
--trace), and can cause significant performance improvement (OpenTitan
simulates 8.5% - build single threaded and withuot --trace).
What previously used to be per module static constants created in
V3Table and V3Prelim are now merged globally within the whole model and
emitted as part of a separate constant pool. Members of the constant
pool are global variables which are declared lazily when used (similar to
loose methods).
This patch introduces the concept of 'loose' methods, which semantically
are methods, but are declared as global functions, and are passed an
explicit 'self' pointer. This enables these methods to be declared
outside the class, only when they are needed, therefore removing the
header dependency. The bulk of the emitted model implementation now uses
loose methods.
A few names were incorrectly mangled, which made --protect-ids produce
invalid output when certain SV class constructs were uses. Now fixed and
added a few extra tests to catch this.
CFuncs only used to be split at procedure (always/initial/final block),
which on occasion can still yield huge output files if they have large
procedures. This patch make CFuncs split at statement boundaries within
procedures. This has the potential to help a lot, but still does not
help if there are huge statements within procedures.
** Add simulation context (VerilatedContext) to allow multiple fully independent
models to be in the same process. Please see the updated examples.
** Add context->time() and context->timeInc() API calls, to set simulation time.
These now are recommended in place of the legacy sc_time_stamp().
This allows compiling the run-time library with optimization even when OPT_FAST is not used in order to imporove model build speed, possibly during debug cycles.
This adds the flag --generate-waivefile <filename>. This will generate
a verilator config file with the proper lint_off statemens to turn off
warnings emitted during this particular run.
This feature can be used to start with using Verilator as linter and
systematically capture all known lint warning for further
elimination. It hopefully helps people turning of -Wno-fatal or
-Wno-lint and gradually improve their code base.
Signed-off-by: Stefan Wallentowitz <stefan.wallentowitz@hm.edu>
--output-split is now on by default with value 20000.
--output-split-cfuncs and --output-split-ctrace now defaults to the
value of --output-split unless explicitly specified.
The --trace-threads option can now be used to perform tracing on a
thread separate from the main thread when using VCD tracing (with
--trace-threads 1). For FST tracing --trace-threads can be 1 or 2, and
--trace-fst --trace-threads 1 is the same a what --trace-fst-threads
used to be (which is now deprecated).
Performance numbers on SweRV EH1 CoreMark, clang 6.0.0, Intel i7-3770 @
3.40GHz, IO to ramdisk, with numactl set to schedule threads on different
physical cores. Relative speedup:
--trace -> --trace --trace-threads 1 +22%
--trace-fst -> --trace-fst --trace-threads 1 +38% (as --trace-fst-thread)
--trace-fst -> --trace-fst --trace-threads 2 +93%
Speed relative to --trace with no threaded tracing:
--trace 1.00 x
--trace --trace-threads 1 0.82 x
--trace-fst 1.79 x
--trace-fst --trace-threads 1 1.23 x
--trace-fst --trace-threads 2 0.87 x
This means FST tracing with 2 extra threads is now faster than single
threaded VCD tracing, and is on par with threaded VCD tracing. You do
pay for it in total compute though as --trace-fst --trace-threads 2 uses
about 240% CPU vs 150% for --trace-fst --trace-threads 1, and 155% for
--trace --trace threads 1. Still for interactive use it should be
helpful with large designs.
Includes `timescale, $printtimescale, $timeformat.
VL_TIME_MULTIPLIER, VL_TIME_PRECISION, VL_TIME_UNIT have been removed
and the time precision must now match the SystemC time precision.
To get closer behavior to older versions, use e.g. --timescale-override
"1ps/1ps".
* Improve tracing performance.
Various tactics used to improve performance of both VCD and FST tracing:
- Both: Change tracing functions to templates to take variable widths as
template parameters. For VCD, subsequently specialize these to the
values used by Verilator. This avoids redundant instructions and hard
to predict branches.
- Both: Check for value changes via direct pointer access into the
previous signal value buffer. This eliminates a lot of simple pointer
arithmetic instructions form the tracing code.
- Both: Verilator provides clean input, no need to mask out used bits.
- VCD: pre-compute identifier codes and use memory copy instead of
re-computing them every time a code is emitted. This saves a lot of
instructions and hard to predict branches. The added D-cache misses
are cheaper than the removed branches/instructions.
- VCD: re-write the routines emitting the changes to be more efficient.
- FST: Use previous signal value buffer the same way as the VCD tracing
code, and only call the FST API when a change is detected.
Performance as measured on SweRV EH1, with the pre-canned CoreMark
benchmark running from DCCM/ICCM, clang 6.0.0, Intel i7-3770 @ 3.40GHz,
and IO to ramdisk:
+--------------+---------------+----------------------+
| VCD | FST | FST separate thread |
| (--trace) | (--trace-fst) | (--trace-fst-thread) |
------------+-----------------------------------------------------+
Before | 30.2 s | 121.1 s | 69.8 s |
============+==============+===============+======================+
After | 24.7 s | 45.7 s | 32.4 s |
------------+--------------+---------------+----------------------+
Speedup | 22 % | 256 % | 215 % |
------------+--------------+---------------+----------------------+
Rel. to VCD | 1 x | 1.85 x | 1.31 x |
------------+--------------+---------------+----------------------+
In addition, FST trace size for the above reduced by 48%.
This looks like a bits/bytes bug. The affected m_codeInc member
determines how many 32-bit words to allocate in a buffer used to store
previous values of the signal, but this was off by a factor of 8, so
we used to use too much memory.
SweRV VCD tracing speed +6.5% (excluding IO, clang 6.0), due mainly to
reduced D cache misses.
When using the __ALL*.cpp based single compile mode (i.e.: without
VM_PARALLEL_BUILDS), the fast path tracing code used to be included in
__Allsup.cpp, which was compiled with OPT_SLOW, severely harming tracing
performance. We now have __ALLfast.cpp and __ALLslow.cpp instead of
__ALLcls.cpp and __ALLsup.cpp, so we can compile the fast support code
with OPT_FAST as well.
This patch eliminates a major piece of inefficiency in FST tracing
support, by using an array to lookup fstHandle values corresponding
to trace codes, instead of a tree based std::map. With this change, FST
tracing is now only about 3x slower than VCD tracing. We do require
more memory to store the symbol lookup table, but the size of that is
still small, for the speed benefit.
Wilson Snyder
Geza Lore
Rafal Kapuscik
Peter Monsson
Stefan Wallentowitz
Vassilis Papaefstathiou
Yossi Nivin
James Hanlon
Marco Widmer