Apart from the representational changes below, this patch renames
AstNodeMath to AstNodeExpr, and AstCMath to AstCExpr.
Now every expression (i.e.: those AstNodes that represent a [possibly
void] value, with value being interpreted in a very general sense) has
AstNodeExpr as a super class. This necessitates the introduction of an
AstStmtExpr, which represents an expression in statement position, e.g :
'foo();' would be represented as AstStmtExpr(AstCCall(foo)). In exchange
we can get rid of isStatement() in AstNodeStmt, which now really always
represent a statement
Peak memory consumption and verilation speed are not measurably changed.
Partial step towards #3420
- Rename `--dump-treei` option to `--dumpi-tree`, which itself is now a
special case of `--dumpi-<tag>` where tag can be a magic word, or a
filename
- Control dumping via static `dump*()` functions, analogous to `debug()`
- Make dumping independent of the value of `debug()` (so dumping always
works even without the debug flag)
- Add separate `--dumpi-graph` for dumping V3Graphs, which is again a
special case of `--dumpi-<tag>`
- Alias `--dump-<tag>` to `--dumpi-<tag> 3` as before
Adds timing support to Verilator. It makes it possible to use delays,
event controls within processes (not just at the start), wait
statements, and forks.
Building a design with those constructs requires a compiler that
supports C++20 coroutines (GCC 10, Clang 5).
The basic idea is to have processes and tasks with delays/event controls
implemented as C++20 coroutines. This allows us to suspend and resume
them at any time.
There are five main runtime classes responsible for managing suspended
coroutines:
* `VlCoroutineHandle`, a wrapper over C++20's `std::coroutine_handle`
with move semantics and automatic cleanup.
* `VlDelayScheduler`, for coroutines suspended by delays. It resumes
them at a proper simulation time.
* `VlTriggerScheduler`, for coroutines suspended by event controls. It
resumes them if its corresponding trigger was set.
* `VlForkSync`, used for syncing `fork..join` and `fork..join_any`
blocks.
* `VlCoroutine`, the return type of all verilated coroutines. It allows
for suspending a stack of coroutines (normally, C++ coroutines are
stackless).
There is a new visitor in `V3Timing.cpp` which:
* scales delays according to the timescale,
* simplifies intra-assignment timing controls and net delays into
regular timing controls and assignments,
* simplifies wait statements into loops with event controls,
* marks processes and tasks with timing controls in them as
suspendable,
* creates delay, trigger scheduler, and fork sync variables,
* transforms timing controls and fork joins into C++ awaits
There are new functions in `V3SchedTiming.cpp` (used by `V3Sched.cpp`)
that integrate static scheduling with timing. This involves providing
external domains for variables, so that the necessary combinational
logic gets triggered after coroutine resumption, as well as statements
that need to be injected into the design eval function to perform this
resumption at the correct time.
There is also a function that transforms forked processes into separate
functions.
See the comments in `verilated_timing.h`, `verilated_timing.cpp`,
`V3Timing.cpp`, and `V3SchedTiming.cpp`, as well as the internals
documentation for more details.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
All remaining use of conditional compilation in the tracing
implementation of the run-time library are replaced with the use of
VerilatedModel::traceConfig, and is now done at run-time.
VCD tracing is now parallelized using the same thread pool as the model.
We achieve this by breaking the top level trace functions into multiple
top level functions (as many as --threads), and after emitting the time
stamp to the VCD file on the main thread, we execute the tracing
functions in parallel on the same thread pool as the model (which we
pass to the trace file during registration), tracing into a secondary
per thread buffer. The main thread will then stitch (memcpy) the buffers
together into the output file.
This makes the `--trace-threads` option redundant with `--trace`, which
now only affects `--trace-fst`. FST tracing uses the previous offloading
scheme.
This obviously helps a lot in VCD tracing performance, and I have seen
better than Amdahl speedup, namely I get 3.9x on XiangShan 4T (2.7x on
OpenTitan 4T).
The --prof-threads option has been split into two independent options:
1. --prof-exec, for collecting verilator_gantt and other execution
related profiling data, and
2. --prof-pgo, for collecting data needed for PGO
The implementation of execution profiling is extricated from
VlThreadPool and is now a separate class VlExecutionProfiler. This means
--prof-exec can now be used for single-threaded models (though it does
not measure a lot of things just yet). For consistency VerilatedProfiler
is renamed VlPgoProfiler. Both VlExecutionProfiler and VlPgoProfiler are
in verilated_profiler.{h/cpp}, but can be used completely independently.
Also re-worked the execution profile format so it now only emits events
without holding onto any temporaries. This is in preparation for some
future optimizations that would be hindered by the introduction of function
locals via AstText.
Also removed the Barrier event. Clearing the profile buffers is not
notably more expensive as the profiling records are trivially
destructible.
This is to allow C++ verilator toplevel to support
multiple modes of waveform tracing
VM_TRACE_FST can be used inside a #if VM_TRACE
section to switch between classic .vcd tracing and the
more compact .fst format supported by GTKWAVE
* Add a test to use shared object of protect-lib
* Add a guard to call ctor/dtor just once even when a protec-lib is shared object.
* Pass .a to linker in leaf-last order for older ld.
* Add -flat_namespace for mac
* No need to link the intermediate .so in hierarchical verilation
* apply clang-format
* run all tests in ci instead of cron. DONT_MERGE
* Add -undefined dynamic_lookup for mac environment when linking a shared protect-lib.
* Let's just check on mac for now. DONT_MERGE
* Revert "Let's just check on mac for now. DONT_MERGE"
This reverts commit 533fac6f9f.
* Revert "run all tests in ci instead of cron. DONT_MERGE"
This reverts commit fb4ac1fb42.
Convert trace buffer to 32-bit entries, rather than a union containing a
pointer type. Also tweaked trace entry layouts for a bit more
performance. This gains another 10% on SweRV EH1 CoreMark.
We used to include a .cpp file on the link line for the shared library,
which was ignored, but generated a .d file for the .so which contained
the header files required by the .cpp file. This then caused a rebuild
where we included the .d in verilated.mk to included in the .h headers
among the prerequisites of the .so, yielding a clang error about treating
.h files as c++-header rather than c-header... Long story short, we don't
do that anymore. This used t cause t_a4_examples to fail on occasion.
Note there is no need for a separate compilation rule for the
<--protect-lib>.cpp, as it will jsut pick up the standard OPT_FAST rule.
The --trace-threads option can now be used to perform tracing on a
thread separate from the main thread when using VCD tracing (with
--trace-threads 1). For FST tracing --trace-threads can be 1 or 2, and
--trace-fst --trace-threads 1 is the same a what --trace-fst-threads
used to be (which is now deprecated).
Performance numbers on SweRV EH1 CoreMark, clang 6.0.0, Intel i7-3770 @
3.40GHz, IO to ramdisk, with numactl set to schedule threads on different
physical cores. Relative speedup:
--trace -> --trace --trace-threads 1 +22%
--trace-fst -> --trace-fst --trace-threads 1 +38% (as --trace-fst-thread)
--trace-fst -> --trace-fst --trace-threads 2 +93%
Speed relative to --trace with no threaded tracing:
--trace 1.00 x
--trace --trace-threads 1 0.82 x
--trace-fst 1.79 x
--trace-fst --trace-threads 1 1.23 x
--trace-fst --trace-threads 2 0.87 x
This means FST tracing with 2 extra threads is now faster than single
threaded VCD tracing, and is on par with threaded VCD tracing. You do
pay for it in total compute though as --trace-fst --trace-threads 2 uses
about 240% CPU vs 150% for --trace-fst --trace-threads 1, and 155% for
--trace --trace threads 1. Still for interactive use it should be
helpful with large designs.
Kamil Rakoczy
Geza Lore
Wilson Snyder
Krzysztof Bieganski
HungMingWu
Julien Margetts
Àlex Torregrosa
Markus Krause
Yutetsu TAKATSUKASA