Combined Dfg variable elimination into the regularization pass that runs
before converting back to Ast. This avoids introducing some unnecessary
temporaries.
Added replacing of variables with constants in the Ast if after the
Dfg passes they are known to be constants. This is only done in final
scoped Dfg application.
Avoid introducing temporaries for common sub-expressions that are
cheaper to re-compute than store in a temporary variable.
Enable removal of redundant unpacked array variables.
Also fixes#6394 as this patch involved changes to that code.
Added a mini type system for Dfg using DfgDataType to replace Dfg's use
of AstNodeDType. This is much more restricted and represents only the
types Dfg can handle in a canonical form. This will be needed when
adding more support for unpacked arrays and maybe unpacked structs one
day.
Also added an internal type checker for DfgGraphs which encodes all the
assumptions the code makes about type relationships in the graph. Run
this in a few places with --debug-check. Fix resulting fallout.
Reduce set of synthesized logic to be more in-line with what Dfg used to
handle before + drivers of circular variables. This was always the
intention but the previous algorithm was both a bit too eager, and also
missed some circular variables. We can add back more heuristics based on
performance measurements for non-circular logic later.
Parts of this algorithm were distributed over many files some
masquerading as re-usable APIs, they were not. Move everything into one
file and avoid unnecessary virtual functions.
- Remove _ENUM_END, so -Wswitch does not demand it's covered. Use the
new NUM_TYPES constexpr member instead.
- Remove 'at' prefix. This seems historical and is not particularly useful.
- Fix some cppcheck warts while at it
Add DfgUserMap as a handle around the one pointer worth of algorithm
specific 'user' storage in each DfgVertex. This reduces verbosity,
improves type safety and correctness. Also enables us to remove one
pointer from DfgVertex to reduce memory use. No functional change.
Large scale refactoring to simplify some of the more obtuse internals of
DFG. Remove multiple redundant internal APIs, simplify representation of
variables, fix potential unsoundness in circular decomposition. No
functional change intended.
Added cppcheck-suppressions.txt in the repo root. You can add new
patterns in there instead of having to parse the XML output.
Also configure to add the -D__GNUC__ preprocessor macro, which makes it
understand UASSERT (it understands the 'noreturn' function attribute).
Added some case by case specific suppressions and fixed up other code,
especially in V3Ast*h and V3Dfg*.h, including code generated by astgen
that had some no-ops that irks cppcheck.
One thing it does not seem to like is `const` class members with default
initializers in the class. It will assume that's always the value, even
if overridden in the constructor. We had few so removed them.
With that a lot of files in `src/` are now clean or only have a handful
of issues. Therefore, I have also deleted cppcheck_filtered, and made it
produce human readable output straight to the terminal.
Regarding cleaning up the reported nits, I kind of got bored after
V3[A-E] so pausing here. Apologies for the merge conflicts.
Tested with cppcheck 2.13.0
This patch adds DfgLogic, which is a vertex that represents a whole,
arbitrarily complex combinational AstAlways or AstAssignW in the
DfgGraph.
Implementing this requires computing the variables live at entry to the
AstAlways (variables read by the block), so there is a new
ControlFlowGraph data structure and a classical data-flow analysis based
live variable analysis to do that at the variable level (as opposed to
bit/element level).
The actual CFG construction and live variable analysis is best effort,
and might fail for currently unhandled constructs or data types. This
can be extended later.
V3DfgAstToDfg is changed to convert the Ast into an initial DfgGraph
containing only DfgLogic, DfgVertexSplice and DfgVertexVar vertices.
The DfgLogic are then subsequently synthesized into primitive operations
by the new V3DfgSynthesize pass, which is a combination of the old
V3DfgAstToDfg conversion and new code to handle AstAlways blocks with
complex flow control.
V3DfgSynthesize by default will synthesize roughly the same constructs
as V3DfgAstToDfg used to handle before, plus any logic that is part of a
combinational cycle within the DfgGraph. This enables breaking up these
cycles, for which there are extensions to V3DfgBreakCycles in this patch
as well. V3DfgSynthesize will then delete all non synthesized or non
synthesizable DfgLogic vertices and the rest of the Dfg pipeline is
identical, with minor changes to adjust for the changed representation.
Because with this change we can now eliminate many more UNOPTFLAT, DFG
has been disabled in all the tests that specifically target testing the
scheduling and reporting of circular combinational logic.
After making a cyclic DFG component acyclic, merge that component back
into the acyclic sub-graph of the input graph. This enables optimizing
through the components that were made acyclic in their larger context.
This used to be restricted to variable vertices, but now can handle
arbitrary circular vertices that represent packed values. It also
converges faster than the earlier version. Prep for resolving loops
through arrays.
SystemC variables are fairly special (they can only be assigned to/from,
but not otherwise participate in expressions), which complicates some
DFG code. These variables only ever appear as port on the top level
wrapper, so excluding them from DFG does not make us loose any
optimizations, but simplifies internals.
This is mostly a refactoring, but also enables handling some more
UNOPTFLAT, when the variable is only partially assigned in the cycle.
Previously the way partial assignments to variables were handled were
through the DfgVerexVar types themselves, which kept track of all
drivers. This has been replaced by DfgVertexSplice (which always drives
a DfgVeretexVar), and all DfgVertexVar now only have a single source,
either a DfgVertexSplice, if partially assigned, or an arbitrary
DfgVertex when updated as a whole.
Added an algorithm that can break some combinational cycles in DFG, by
attempting to trace driver logic until we escape the cycle. This can
eliminate a decent portion of UNOPTFLAT warnings. E.g. due to this code:
```systemverilog
assign a[0] = .....;
assign a[1] = ~a[0];
```
Somewhat commonly, there is code out there that compares an expression (or
variable) against many different constants, e.g. a one-hot decoder:
```systemverilog
assign oneHot = {x == 3, x == 2, x == 1, x == 0};
```
If the width of the expression is sufficiently large, this can blow up
a GCC pass and take an egregious amount of memory and time to compile.
Adding a new DFG pass that will generate a cheap one-hot decoder:
to compute:
```systemverilog
wire [$bits(x)-1:0] idx = <the expression being compared many times>
reg tab [1<<$bits(x)] = '{default: 0};
reg [$bits(x)-1:0] pre = '0;
always_comb begin
tab[pre] = 0;
tab[idx] = 1;
pre = idx ; // This assignment marked to avoid a false UNOPFTLAT
end
```
We then replace the comparisons `x == CONST` with `tab[CONST]`.
This is generally performance neutral, but avoids the compile time and memory
blowup with GCC (128GB+ -> 1GB in one example).
We do not apply this if the comparisons seem to be part of a `COMPARE ?
val : COND` conditional tree, which the C++ compilers can turn into jump
tables.
This enables all XiangShan configurations from RTLMeter to now build with GCC,
so in this patch we enabled those in the nightly runs.
The DFG peephole pass converts all associative trees into right leaning,
which is good for simplifying pattern recognition, but can lead to an
excessive amount of wide intermediate results being constructed for
right leaning concatenations.
Add a new pass to balance concatenation trees by trying to:
- Create VL_EDATASIZE (32-bit) sub-terms, so words can then be packed
easily afterwards
- Try to ensure the operands of a concat are roughly the same width
within a concatenation tree. This does not yield the shortest tree,
but it ensures it has many sub-nodes that are small enough to fit into
machine registers.
This can eliminate a lot of wide intermediate results, which would need
temporaries, and also increases ILP within sub-expressions (assuming the
C compiler can't figure that out itself).
This is over 2x run-time speedup on the high_perf configuration of
VeeR EH2 (which you could arguably also get with -fno-dfg, but oh well).
This functionality used to be distributed in the removeVars pass and the
final dfgToAst conversion. Instead added a new 'regularize' pass to
convert DFGs into forms that can be trivially converted back to Ast, and
a new 'eliminateVars' pass to remove/repalce redundant variables. This
simplifies dfgToAst significantly and makes the code a bit easier to
follow.
The new 'regularize' pass will ensure that every sub-expression with
multiple uses is assigned to a temporary (unless it's a trivial memory
reference or constant), and will also eliminate or replace redundant
variables. Overall it is a performance neutral change but it does
enable some later improvements which required the graph to be in this
form, and this also happens to be the form required for the dfgToAst
conversion.
Replace the 'run to fixed point' algorithm with a work list driven
approach. Instead of marking the graph as changed, we explicitly add
vertices to the work list, to be visited, when a vertex is changed. This
improves both memory locality (as the work list is processed in last in
first out order), and removed unnecessary visitations when only a few
nodes changes.
Apart from the representational changes below, this patch renames
AstNodeMath to AstNodeExpr, and AstCMath to AstCExpr.
Now every expression (i.e.: those AstNodes that represent a [possibly
void] value, with value being interpreted in a very general sense) has
AstNodeExpr as a super class. This necessitates the introduction of an
AstStmtExpr, which represents an expression in statement position, e.g :
'foo();' would be represented as AstStmtExpr(AstCCall(foo)). In exchange
we can get rid of isStatement() in AstNodeStmt, which now really always
represent a statement
Peak memory consumption and verilation speed are not measurably changed.
Partial step towards #3420
Vertices representing variables (DfgVertexVar) and constants (DfgConst)
are very common (40-50% of all vertices created in some large designs),
and we also need to, or can treat them specially in algorithms. Keep
these as separate lists in DfgGraph for direct access to them. This
improve verilation speed.
Cyclic components are now extracted separately, so there is no
functional reason to have to do a topological sort (previously we used it
to detect cyclic graphs). Removing it to gain some speed.
Geza Lore
Wilson Snyder
Bartłomiej Chmiel
Mariusz Glebocki
Anthony Donlon
Kamil Rakoczy