Commentary: Minor spelling fixes in docs/guide/*.rst (#3327)

docs/CONTRIBUTORS

@@ -57,6 +57,7 @@ Keith Colbert
 Kevin Kiningham
 Krzysztof Bieganski
 Kuba Ober
+Larry Doolittle
 Ludwig Rogiers
 Lukasz Dalek
 Maarten De Braekeleer

docs/guide/deprecations.rst

@@ -18,4 +18,4 @@ Verilated_heavy.h
 
 Option `--cdc`
   The experimental `--cdc` option is believed to be generally unused and is
-  planned for removeal no sooner than January 2023.
+  planned for removal no sooner than January 2023.

docs/guide/exe_verilator.rst

@@ -884,7 +884,7 @@ Summary:
 
    Using DPI imports/exports is allowed and generally relatively safe in
    terms of information disclosed, which is limited to the DPI function
-   prototyptes.  Use of the VPI is not recommended as many design details
+   prototypes.  Use of the VPI is not recommended as many design details
    may be exposed, and an INSECURE warning will be issued.
 
 .. option:: --protect-lib <name>
@@ -1514,7 +1514,7 @@ The grammar of configuration commands is as follows:
 .. option:: no_clocker -module "<modulename>" [-function "<funcname>"] -var "<signame>"
 
    Indicates that the signal is used as clock or not. This information is
-   used by Verilator to mark the signal and any derrived signals as
+   used by Verilator to mark the signal and any derived signals as
    clocker.  See :vlopt:`--clk`.
 
    Same as :option:`/*verilator&32;clocker*/` metacomment.

docs/guide/exe_verilator_coverage.rst

@@ -67,7 +67,7 @@ which have low coverage are written to the output directory.
 
 Specifies if the coverage point does not include the count number of
 coverage hits, then the coverage point will be considered above the
-threashold, and the coverage report will put a "%" to indicate the coverage
+threshold, and the coverage report will put a "%" to indicate the coverage
 is not sufficient.  Defaults to 10.
 
 .. option:: --help

docs/guide/extensions.rst

@@ -185,7 +185,7 @@ or "`ifdef`"'s may break other tools.
 .. option:: /*verilator&32;no_clocker*/
 
    Specifies that the signal is used as clock or not. This information is
-   used by Verilator to mark the signal and any derrived signals as
+   used by Verilator to mark the signal and any derived signals as
    clocker.  See :vlopt:`--clk`.
 
    Same as :option:`clocker` and :option:`no_clocker` in configuration

docs/guide/faq.rst

@@ -37,8 +37,8 @@ Does Verilator run under Windows?
 
 Yes, ideally run Ubuntu under Windows Subsystem for Linux (WSL2).
 Alternatively use Cygwin, though this tends to be slower and is not
-regurally tested.  Verilated output also compiles under Microsoft Visual
+regularly tested.  Verilated output also compiles under Microsoft Visual
-C++, but this is also not regurally tested.
+C++, but this is also not regularly tested.
 
 
 Can you provide binaries?

docs/guide/languages.rst

@@ -136,7 +136,7 @@ ___05F (5F is the hex code of an underscore.)
 Bind
 ----
 
-sVerilator only supports bind to a target module name, not to an
+Verilator only supports bind to a target module name, not to an
 instance path.
 
 

docs/guide/warnings.rst

@@ -518,7 +518,7 @@ List Of Warnings
    Another way DIDNOTCONVERGE may occur is if # delays are used to generate
    clocks.  Verilator ignores the delays and gives an :option:`ASSIGNDLY`
    or :option:`STMTDLY` warning.  If these were suppressed, due to the
-   absense of the delay, the code may now oscillate.
+   absence of the delay, the code may now oscillate.
 
    Finally, rare, more difficult cases can be debugged like a C++ program;
    either enter :command:`gdb` and use its tracing facilities, or edit the
@@ -528,7 +528,7 @@ List Of Warnings
 .. option:: ENDCAPSULATED
 
    Warns that a class member is declared is local or protected, but is
-   being accessed from outside that class (if local) or a derrived class
+   being accessed from outside that class (if local) or a derived class
    (if protected).
 
    Ignoring this warning will only suppress the lint check, it will
@@ -924,7 +924,7 @@ List Of Warnings
    simulate correctly.
 
    Other tools with similar warnings: Icarus Verilog's portbind, "warning:
-   Instantiating module ... with dangling impot port (...)". Slang's
+   Instantiating module ... with dangling input port (...)". Slang's
    unconnected-port, "port '...' has no connection".