I noticed that if lintUnusedKeysOnLoad := true is set, it emits a lint
warning.
As a side note, Project linting takes about 300-400ms in the sbt project
so we might want to consider disabling it by default in batch mode at
least.
The sbt project load made a number of relatively inefficient
transformations of scala collecitons. I went through and found the slow
parts during project loading and made my best attempt at fixing them.
The most significant changes I made were in places using IMap. An IMap
is more or less a wrapper around an immutable Map. It can be much faster
to construct an IMap by creating a java mutable hashmap, wrapping it a
scala Map that delegates to the underlying java hashmap (with a copy on
write if the map is modified) and constructing the IMap from the wrapped
map. It was also in many cases to parallelize some transformations
wherever the order didn't matter.
After applying all of these changes, I found that loading the sbt
project took generally between 8.5 and 9 seconds on my laptop. With
1.3.13, it hovered around 11.5 seconds. I saw a similar speedup in zinc.
The biggest specific improvement was that generating the compiled map
dropped from between 3.5-4 seconds to pretty consistently being around
1.5 seconds.
This reverts commit b1dcf031a5.
I found that b1dcf031a5 had some
unintended consequences that seemed to mess up the prompt state. The
real problem that it was trying to address was that the prompt was being
interleaved with log messages in some scenarios. There was a different
way to fix that in ProgressState that was both simpler and more
reliable.
The jline2 history file format is incompatible with jline3 and jline3
prints a very noisy warning if it detects such a file. History will also
not work with jline3 until you remove or reformat the old file.
I noticed that when reloading the build, that certain errors are logged
by sbt to System.err. These were not shown to a thin client because we
weren't forwarding System.err. This change remedies that.
System.err is handled more simply than System.out. We do not put
System.err through the progress state because generally System.err is
tends to be unbuffered. I had hesitated to add System.err to the
Terminal interface at all to give users an escape hatch but I couldn't
get project loading to work well with the thin client without it.
In db4878c786, TaskProgress became an
object which mostly made things easier to reason about. The one problem
was that it started leaking tasks with every run because the timings map
would accumulate tasks that weren't cleared. To fix this, we can clear
the timings and activeTasksMap in the TaskProgress object in the
afterAllCompleted callback. Some extra null checks needed to be added
since it's possible for the maps to not contain a previously added key
after reset has been called.
This fixes the nio/external-hooks test and also restores the performance
of the benchmarks for the latest sbt version in
https://github.com/eatkins/scala-build-watch-performance which had
regressed when the custom ExternalHooks were disabled in
7c4b01d9f7.
The main change is that it changes the ReadStamps object that is passed
into the compiler options to one that uses the unmanagedFileStampCache
and managedFileStampCache for source files and falls back to the default
stamper otherwise. This improves the performance quite significantly
since we only hash the files once. It also makes it so that the analysis
file will contain the source file stamps of the files when compilation
began, rather than when compilation ended. That is what
nio/external-hooks was testing. In the real world what could happen was
that one modified a source file during compilation but then no
incremental re-compilation would occur because after the initial
compilation completed, zinc wrote the stamp of the modified source file
in the analysis file even though it may have actually compiled a
different version of the source file.
I noticed some RejectedExecutionExceptions in travis failures of
ClientTest. This could happen if we try to write output to the
network channel after it has been closed. To avoid this problem, we can
catch RejectedExecutionExceptions and do an immediate flush if the
executor has been shutdown.
In order for sbt to function well, it needs the test interface, jansi
and forked jline jars provided by a classloader that is parent to all
other sbt classloaders. To do this for just the test interface jar, I
just checked if the top loader in the app configuration had the correct
name. Now that there are three jars, this is more complicated so I
updated the launcher to create a top loader with the method getEarlyJars
implemented and returning the three needed jars. This is a much more
scalable design.
If sbt is entered with a configuration that does not have a top loader
with the getEarlyJars method defined, then we just fall back on
constructing the default layered classlaoder from the configuration
classpath.
The motivation for this change is that I discovered that sbt immediately
crashed when I tried to run a non-snapshot version. After this change, I
verified that both snapshot and non-snapshot versions of the latest sbt
code could load with both an obsolete and up-to-date launcher.
The unprompt method will actually kill the ui thread if its running. If
we don't to this, we can get into a weird state where after watch is
exited by <enter>, the ask user thread spins up but before it can print
the prompt, the terminal prompt is changed to Running, which has an
empty prompt. The end result is that jline3 never displays the prompt
even though the line reader is active and reading bytes. When the user
typed <enter> a prompt would appear. They also could input a command and
it would run but it wasn't obvious what would happen since the prompt
was missing.
The build source check is evaluated at times when we can't be completely
sure that global logger is pointing at the terminal that initiated the
reload (which may be a passive watch client). To work around this, we
can inspect the exec to determine which terminal initiated the check and
write any output directly to that terminal.
This commit upgrades sbt to using jline3. The advantage to jline3 is
that it has a significantly better tab completion engine that is more
similar to what you get from zsh or fish.
The diff is bigger than I'd hoped because there are a number of
behaviors that are different in jline3 vs jline2 in how the library
consumes input streams and implements various features. I also was
unable to remove jline2 because we need it for older versions of the
scala console to work correctly with the thin client. As a result, the
changes are largely additive.
A good amount of this commit was in adding more protocol so that the
remote client can forward its jline3 terminal information to the server.
There were a number of minor changes that I made that either fixed
outstanding ui bugs from #5620 or regressions due to differences between
jline3 and jline2.
The number one thing that caused problems is that the jline3 LineReader
insists on using a NonBlockingInputStream. The implementation ofo
NonBlockingInputStream seems buggy. Moreover, sbt internally uses a
non blocking input stream for system in so jline is adding non blocking
to an already non blocking stream, which is frustrating.
A long term solution might be to consider insourcing LineReader.java
from jline3 and just adapting it to use an sbt terminal rather than
fighting with the jline3 api. This would also have the advantage of not
conflicting with other versions of jline3. Even if we don't, we may want to
shade jline3 if that is possible.
It is possible for sbt to get into a weird state when in a continuous
build when the auto reload feature is on and a source file and a build
file are changed in a small window of time. If sbt detects the source
file first, it will start running the command but then it will
autoreload when it runs the command because of the build file change.
This causes the watch to get into a broken state because it is necessary
to completely restart the watch after sbt exits.
To fix this, we can aggregate the detected events in a 100ms window. The
idea is to handle bursts of file events so we poll in 5ms increments and
as soon as no events are detected, we trigger a build.
Remote clients sometimes flicker when updating progress. This is especially
noticeable when there are two clients and one of them is running a command,
the other will tend to have some visible flickering and character ghosting.
As an experiment, I buffered calls to flush in the NetworkChannel output
stream and the artifacts went away.
Running a `~` command in a local build off the latest develop branch
will cause the build to reload even if the build sources were only
touched and not actually modified.
In the situation where sbt was started in server mode and a client is
running a `~` command and a project reload is triggered by a change to
a build source, the console terminal looks like
sbt:foo>
[info] received remote command: ~compile
sbt:foo>
[info] welcome to sbt 1.4.0-SNAPSHOT (Azul Systems, Inc. Java 1.8.0_252)
sbt:foo>
[info] loading global plugins from ~/.sbt/1.0/plugins
sbt:foo>
[info] loading settings for project foo-build from metals.sbt ...
sbt:foo>
[info] loading project definition from
~/foo/project
sbt:foo>
[info] loading settings for project root from build.sbt ...
sbt:foo>
[info] loading settings for project macros from build.sbt ...
sbt:foo>
[info] loading settings for project main from build.sbt ...
sbt:foo>
[info] set current project to foo (in build file:~/foo)
sbt:foo>
This change fixes that by unprompting all channels during project
loading and reprompting them when it completes.
Linting unused keys was adding a significant overhead to sbt project
loading because Def.compiled is so slow. It was around 4 seconds in the
sbt project on my computer.
The continuous command recompiles the setting graph into a CompiledMap
data structure so that it can determine which files it needs to
transitively monitor during watch. Generating the CompiledMap can be
very slow for large projects (5 seconds or so on my computer in the sbt
project) and this startup cost is paid every time the user enters a
watch with `~`. To avoid this, we can cache the compile map that is
generated during the initial settings evaluation.
The only real drawback I can see is that the compiled map is guaranteed
to remain in memory so long as the BuildStructure instance that holds it
is alive. Given the performance benefit, this seems like a worthwhile
tradeoff.
There have been occasional failures on appveyor where an
AccessDeniedException was thrown at this point. AccessDeniedExceptions
thrown during scripted tests can often by resolved with a Retry.
Reboot is a bit tricky for the remote client because the sbt server is
actually shut down during reboot. When sbt shuts down the client, it can
notify the client that the reason is a reboot. The client can then
connect to the recently introduced boot control socket to display the
reboot output and supply input in case the build fails to load. Once the
server has brought back up the server, the client can reconnect. When
the client session is interactive, we're done once we reconnect. When
it's a batch session, the client needs to resend the remaing commands
that have submitted that it hasn't yet run.
Shutdown was being handled as a special case in CommandExchange. This
promotes it to a full fledged command. Also replace instance of
hard-coded strings with constants.
On windows, it is sometimes possible to leak an sbt process if two
processes are started simultaneously by a remote client at the same
time. When this happens, the second process is unable to create a
server because of the first process and it also has no io streams
because the the client detaches its streams. We can detect this
in the shell command and prevent the process from persisting as a
zombie.
When a remote client sent the command `shutdown` through the shell, the
client would log an error and exit with a nonzero exit code because
before shutting down, the server would notify the client that it was
disconnecting it due to shutdown. In this scenario, we actually do not
want the client to log an error since they initiated the shutdown, so
before doing the full shutdown, we shutdown the client that inititated
the shutdown with the flag that tells the client not to log the shutdown
or return a nonzero exit code.
One issue with the remote client approach is that it is possible for
multiple clients to start multiple servers concurrently. I encountered
this in testing where in one tmux pane I'd start an sbt server and in
another I might run sbtc before the server had finished loading. This
can actually cause java processes to leak because the second process is
unable to start a server but it doesn't necessarily die after the client
that spawned it exits. This commit prevents this scenario by creating a
server socket before it loads the build and closes once the build is
complete. The client can then receive output bytes and forward input to
the booting server.
The socket that is created during boot is always a local socket, either
a UnixDomainServerSocket or a Win32NamedPipeServerSocket. At the moment,
I don't see any reason to support TCP. This socket also has no impact at
all on the normal sbt server that is started up after the project has
loaded.
The socket is hardcoded to be located at the relative path
project/target/$SOCK_NAME or the named pipe $SOCK_NAME where SOCK_NAME
is a farm hash of the absolute path of the project base directory. There
is no portfile json since there is no need since we don't support TCP.
After the socket is created it listens for clients to whom it relays
input to the console's input stream and relays the process output back
to the client. See the javadoc in BootServerSocket.java for further
details.
The process for forking the server is also a bit more complicated after
this change because the client will read the process output and error
streams until the socket is created and thereafter will only read output
from the socket, not the process.
This commit reworks TaskProgress so that it is a singleton object. By
using a singleton, we ensure that there is at most one progress thread
running at a time. With multiple threads, there can be flickering in the
progress reports.
This fixes https://github.com/sbt/sbt/issues/5547. There also was a bug
that the reference to the progress thread was not reset when the thread
itself exited. As a result, it was possible for progress reporting to
stop while tasks were still running. This seemed to primarily happen in
multi-project builds. It should be fixed by this change.
The existing implementation of watch did not work with the thin client.
In sbt 1.3.0, watch was changed to be a blocking command that performed
manual task evaluation. This commit makes the implementation more
similar to < 1.3.0 where watch modifies the state and after running the
user specified command(s), it enters a blocking command. The new
blocking command is very similar to the shell command.
As part of this change, I also reworked some of the internals of watch
so that a number of threads are spawned for reading file and input
events. By using background threads that write to a single event queue,
we are able to block on the file events and terminal input stream rather
than polling. After this change, the cpu utilization as measured by ps
drops from roughly 2% of a cpu to 0.
To integrate with the network client, we introduce a new UITask that is
similar to the AskUserTask but instead of reading lines and adding execs
to the command queue, it reads characters and converts them into watch
commands that we also append to the command queue.
With this new implementation, the watch task that was added in 1.3.0 no
longer works. My guess is that no one was really using it. It wasn't
documented anywhere. The motivation for the task implementation was that
it could be called within another task which would let users define a
task that monitors for file changes before running. Since this had never
been advertised and is only of limited utility anyway, I think it's fine
to break it.
I also had to disable the input-parser and symlinks tests. I'm not 100%
sure why the symlinks test was failing. It would tend to work on my
machine but fail in CI. I gave up on debugging it. The input-parser test
also fails but would be a good candidate to be moved to the client test
in the serverTestProj. At any rate, it was testing a code path that was
only exercised if the user changed the watchInputStream method which is
highly unlikely to have been done in any user builds.
The WatchSpec had become a nuisance and wasn't really preventing from
any regressions so I removed it. The scripted tests are how we test
watch.
The sbtc client can provide a ux very similar to using the sbt shell
when combined with tab completions. In fact, since some shells have a
better tab completion engine than that provided by jilne2, the
experience can be even better. To make this work, we add another entry
point to the thin client that is capable of generating completions for
an input string. It queries sbt for the completions and prints the
result to stdout, where they are consumed by the shell and fed into its
completion engine.
In addition to providing tab completions, if there is no server running
or if the user is completing `runMain`, `testOnly` or `testQuick`, the
thin client will prompt the user to ask if they would like to start an
sbt server or if they would like to compile to generate the main class
or test names. Neither powershell nor zsh support forwarding input to
the tab completion script. Zsh will print output to stderr so we
opportunistically start the server or complete the test class names.
Powershell does not print completion output at all, so we do not start a
server or fill completions in that case*. For fish and bash, we prompt
the user that they can take these actions so that they can avoid the
expensive operation if desired.
* Powershell users can set the environment variable SBTC_AUTO_COMPLETE
if they want to automatically start a server of compile for run and test
names. No output will be displayed so there can be a long latency
between pressing <tab> and seeing completion results if this variable is
set.
This commit adds the ability for sbt to automatically shut itself down
if it has been idle for some duration of time. The motivation is that
if the user may not realize they have an sbt server running in the
background that is using resources. We don't want to be too aggressive
with the idle timeout because that can reduce the efficacy of the thin
client. A value of one week is chosen so that users can enjoy a long
weekend and when they return to their computer, they won't have to
restart sbt. If they haven't used the server in at least a week, it
seems prudent to just kill it.
The sbtipcsocket by default restricts win32 named pipes to only allow
connections from the same login session. This makes connecting to a
remote server not work over ssh. We relax the default slightly in sbt to
allow the owner of the pipe to connect over any logon shell. The user
could restore the old behavior with:
```
Global / windowsServerSecurityLevel := Win32SecurityLevel.LOGON_DACL
```
or, if YOLO
```
Global / windowsServerSecurityLevel := Win32SecurityLevel.NO_SECURITY
```
When we start sbt with the thin client, we want to close the server io
streams after it loads so that the client exiting won't crash the
server. When we are running the server as part of the server tests, it
is nice to have the server output. By setting the --close-io-streams
flag when we launch the server in the client, we are able to achieve
both.
Running multi commands (input commands delimited by semi-colons) did not
work with the thin client. The commands would actually run on the
server, but the thin client would exit immediately without displaying
the output. The reason was that MainLoop would report the exec complete
when all it had done was split the original command into its constituent
parts and prepended them to the state command list. To work around this,
when we detect a network source command, we can remap its exec id to a
different id and only report the original exec id after the commands
complete. We also have to keep track of whether or not the command
succeeded or failed so that the reporting command reports the correct
result.
The way its implemented is with the the following steps:
1. set the terminal to the network terminal
2. stash the current onFailure so that we can properly report failures
3. add the new exec id to a map of the original exec id to the generated
id
4. actually run the command
5. if the command succeeds, add the original exec id to a result map
6. pop the onFailure
7. restore the terminal to console
8. report the result -- if the original exec id is in the result map we
report success. Otherwise we report failure.
There is also logic in NetworkChannel for finding the original exec id
if reporting one of the artificially generated exec ids because the
client will not be aware of that id.
When the user presses ctrl+c, we want to cancel any running tasks that
were initiated by that client. This is a bit tricky because we may not
be sure what is running if the client is in interactive mode. To work
around this, we send a cancellation request with the special id
__CancelAll. When the NetworkChannel receives this request, it cancels
the active task if was initiated by the client that sent the
cancellation request. The result it returns to the client indicates if
there were any tasks to be cancelled. If there were and the client was
in interactive mode, we do not exit. Otherwise we exit.
This commit makes it possible for a remote client to cancel a running
task initiated by a different client by typing `cancel` into the shell.
It can be useful if the remote client has run something blocking like
console.
The console task can't safely be interrupted, so instead we write some
newlines filed by ctrl+d to exit the console.
This commit makes it possible for the sbt server to render the same ui
to multiple clients. The network client ui should look nearly identical
to the console ui except for the log messages about the experimental
client.
The way that it works is that it associates a ui thread with each
terminal. Whenever a command starts or completes, callbacks are invoked
on the various channels to update their ui state. For example, if there
are two clients and one of them runs compile, then the prompt is changed
from AskUser to Running for the terminal that initiated the command
while the other client remains in the AskUser state. Whenever the client
changes uses ui states, the existing thread is terminated if it is
running and a new thread is begun.
The UITask formalizes this process. It is based on the AskUser class
from older versions of sbt. In fact, there is an AskUserTask which is
very similar. It uses jline to read input from the terminal (which could
be a network terminal). When it gets a line, it submits it to the
CommandExchange and exits. Once the next command is run (which may or
may not be the command it submitted), the ui state will be reset.
The debug, info, warn and error commands should work with the multi
client ui. When run, they set the log level globally, not just for the
client that set the level.
This commit adds support for remote clients to connect to the sbt server
and attach themselves as a virtual terminal. In order to make this work,
each connection must send a json rpc request to attach to the server.
When this is received, the server will periodically query the remote
client to get the terminal properties and capabilities that allow the
remote client to act as a jline terminal proxy. There is also support
for json messages with ids sbt/systemIn and sbt/systemOut that allow io
to be relayed from the remote terminal to the sbt server and back.
Certain commands such as `exit` should be evaluated immediately. To make
this work, we add the concept of a MaintenanceTask. The CommandExchange
has a background thread that reads MaintenanceTasks and evaluates them
on demand. This allows maintenance tasks to be evaluated even when sbt
is evaluating an exec. If it weren't done this way, when the user typed
exit while a different remote connection was running a command, they
wouldn't be able to exit until the command completed.
The ServerIntents in ServerHandler did not handle
JsonRpcResponseMessage because prior to this commit, sbt clients were
primarily making requests to the server. But now the server sends
requests to the client for the terminal properties and terminal
capabilities so it was necessary to add an onResponse handler to
ServerIntent.
I had to move the network channel publishBytes method to run on a
background thread because there were scenarios in which the client
socket would get blocked because the server was trying to write on the
same thread that the read the bytes from the client.
To make the console command work, it is necessary to hijack the
classloader for JLine. In MetaBuildLoader, we put a custom forked JLine
that has a setter for the TerminalFactory singleton. This allows us to
change the terminal that is used by JLine in ConsoleReader. Without this
hack, the scala console would not work for remote clients.
In order to support a multi-client sbt server ux, we need to factor
`Terminal` out into a class instead of a singleton. Each terminal provides
and outputstream and inputstream. In all of the places where we were
previously relying on the `Terminal` singleton we need to update the
code to use `Terminal.get`, which will redirect io to the terminal whose
command is currently running.
This commit does not implement the server side ui for network clients.
It is just preparatory work for the multi-client ui.
The Terminal implementations have thread safe access to the output
stream. For this reason, I had to remove the sychronization on the
ConsoleOut lockObject. There were code paths that led to deadlock when
synchronizing on the lockObject.
Rather than going through the console appender logging to make
TaskProgress work, we can instead use the CommandExchange. This will be
useful in future commits where there are multiple terminals that all
need to receive progress. By organizing the TaskProgress this way, we
can store a separate progress state for each terminal and update the
progress for all of the active terminals. We also can set the current
running command in command exchange which will be useful in future
commits to show what command is currently running.
This commit also reworks TaskProgress to always kill its thread when
there are no active tasks. It will start a new thread as soon as there
is another active task.
We had similar code for reading json frames from an input stream in
NetworkChannel and ServerConnection. I reworked and consolidated this
logic into a shared method in ReadJsonFromInputStream.
This commit also removes the ObjectMessage reporting methods that
weren't doing anything.
The collectAnalysis task an be a bit slow and delays client connections
from running commands. This commit adds an option to skip the analysis
if it isn't needed. The default behavior is left as it was.
In Load.scala and Defaults.scala, the AppConfiguration.baseDirectory is
dealiased when it is a symlink. This commit dealiases the
AppConfiguration.baseDirectory if it is a symlink so that sbt
`appConfiguration.value.baseDirectory` should be the same as
`baseDirectory.value`.
Rather than enumerate all of the watch keys that may appear unused
though they can be used by the `~` command, rework lintUnused to take a
function `String => Boolean` instead of `Set[String] => Boolean`.
The AppConfiguration.baseDirectory is dealiased during project loading.
Not dealiasing the symlink here could cause a discrepancy between the
`baseDirectory` key and the value of the base key in the root paths map.
In global bspWorkspace setting, retrieve all projects and all configurations that contain the bspTargetIdentifier setting, so that:
- the IntegrationTest configuration, when added to a project, is automatically associated to a BSP target
- a custom configuration that contains the `Defaults.configSettings` is also associated to a BSP target
Try parse the required semanticdbVersion in the initialization request metadata
Issue a warning if the semanticdb plugin is not enabled
Issue a warning if the semanticdb version is lower than the required
This adds `Def.promise` a facility that wraps `scala.concurrent.Promise`. Project layer, there's an implicit for task-that-returns-promise (`Def.Initialize[Task[PromiseWrap[A]]]`) that would inject `await` method, which returns a task. This is a special task that is tagged with `Tags.Sentinel` so that it will bypass the concurrent restrictions. Since there's no CPU- or IO-bound work, this should be ok.
The purpose of this promise for long-running task to communicate with another task midway.
This adds `pushRemoteCache`, `pushRemoteCacheTo`, `pullRemoteCache`, etc to implement cached compilation facility.
In addition, the analysis file location is now made more clear.
Initial draft for bsp support.
This shows two communication pattern around BSP.
First, if the request can be handled with the build knowledge is readily available in `NetworkChannel` we can reply immediately. `BuildServerImpl#onBspBuildTargets` is an example for that.
Second, if the request requires `State`, then we can forward the parameter into a custom command, and reply back from a command. `BuildServerProtocol.bspBuildTargetSources` is an example of that since it needs to invoke tasks to generate sources.
java.util.ServiceLoader uses findResources(), which was not
overriden in ReverseLookupClassLoader, causing resources available
in the descendant classloader not to be discovered when a service
loader instance was using the top classloader.
Having the progress reports directly generated in beforeWork delays the
task from being submitted to the executor. This commit moves all of the
reporting onto the background thread to avoid these delays since
progress is less important than task evaluation.
The old implementation of checkBuildSources can easily take 20ms to run
when called in MainLoop.processCommand. It is rarely faster than 4-5ms.
To reduce this overhead, I stopped using the checkBuildSources task in
processCommand. Instead, I manually cache the build source hashes in a
global state variable and add a file monitor that invalidate the entire
set of source hashes if any changes are detected. This could probably be
more efficient, but I figure that build sources change infrequently
enough that it's fine to just invalidate the entire list of source
hashes.
Because the CheckBuildSources instance is already watching the meta
build, I reworked Continuous to use that FileTreeRepository for the
build sources if it is available.
Bonus: fixes https://github.com/sbt/sbt/issues/5482
I was surprised to find this method in a flamegraph* so I optimized it.
TaskProgress was actually on the hotpath of task evaluation so every
single task was slower to be enqueued with the CompletionService. After
this change, containsSkipTasks dropped out of the flamegraph.
*The flamegraph was for a compile loop where sbt constantly modified a
single source file and re-compiled it. The containsSkipTasks method
appeared in over 2% of the method calls.
As stated in #5492 and #2366 some artifact hosting services (at least
Azure Artifacts, seems to affect GCP as well) do not offer a stable HTTP
Auth realm that can be safely set in SBT credentials, hence the need to
support null or empty Credentials.
The Ivy (publishing) side of the issue was fixed in sbt/ivy#36
As to the resolving side, This commit is only part of the solution as it
just prevents an NPE and does not consider if coursier itself will fall
back to finding credentials with a null realm that matches the server
hostname.
Related-to: #5492
Related-to: #2366
Signed-off-by: Erwan Queffelec <erwan.queffelec@gmail.com>
In order to make supershell work with println, this commit introduces a
virtual System.out to sbt. While sbt is running, we override the default
java.lang.System.out, java.lang.System.in, scala.Console.out and
scala.Console.in (unless the property `sbt.io.virtual` is set to
something other than true). When using virtual io, we buffer all of the
bytes that are written to System.out and Console.out until flush is
called. When flushing the output, we check if there are any progress
lines. If so, we interleave them with the new lines to print.
The flushing happens on a background thread so it should hopefully not
impede task progress.
This commit also adds logic for handling progress when the cursor is not
all the way to the left. We now track all of the bytes that have been
written since the last new line. Supershell will then calculate the
cursor position from those bytes* and move the cursor back to the
correct position. The motivation for this was to make the run command
work with supershell even when multiple main classes were specified.
* This might not be completely reliable if the string contains ansi
cursor movement characters.
Presently if a server command comes in while in the shell, the client
output can appear on the same line as the command prompt and the command
prompt will not appear again until the user hits enter. This is a
confusing ux. For example, if I start an sbt server and type
the partial command "comp" and then start up a client and run the clean
command followed by a compile, the output looks like:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
sbt:scala-compile> comp[info] new client connected: network-1
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:24 PM
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:27 PM
[success] Total time: 2 s, completed Dec 12, 2019, 7:23:31 PM
Now, if I type "ile\n", I get:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
ile
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:34 PM
sbt:scala-compile>
Following the same set of inputs after this change, I get:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
sbt:scala-compile> comp
[info] new client connected: network-1
[success] Total time: 0 s, completed Dec 12, 2019, 7:25:58 PM
sbt:scala-compile> comp
[success] Total time: 0 s, completed Dec 12, 2019, 7:26:14 PM
sbt:scala-compile> comp
[success] Total time: 1 s, completed Dec 12, 2019, 7:26:17 PM
sbt:scala-compile> compile
[success] Total time: 0 s, completed Dec 12, 2019, 7:26:19 PM
sbt:scala-compile>
To implement this change, I added the redraw() method to LineReader
which is a wrapper around ConsoleReader.drawLine; ConsoleReader.flush().
We invoke LineReader.redraw whenever the ConsoleChannel receives a
ConsolePromptEvent and there is a running thread.
To prevent log lines from being appended to the prompt line, in the
CommandExchange we print a newline character whenever a new command is
received from the network or a network client connects and we believe
that there is an active prompt.
Prior to this change, if a network command came in, it would run in the
background with no real feedback in the server ui. Prior to this change,
running compile from the thin client would look like:
sbt:scala-compile>
[success] Total time: 1 s, completed Dec 12, 2019, 7:24:43 PM
sbt:scala-compile>
Now it looks like:
sbt:scala-compile>
[info] Running remote command: compile
[success] Total time: 1 s, completed Dec 12, 2019, 7:26:17 PM
sbt:scala-compile>
It's a bit annoying to have to hit enter here.
Also, this should fix https://github.com/sbt/sbt/issues/5162 because if
there is no System.in attached, the read will return -1 which will cause
sbt to quit.
There typically are fewer than 10 main classes in a project so allow the
user to just input a single digit in those cases. Otherwise fallback to
a line reader.
When the user inputs `run` or `runMain` we shouldn't print the warning
about multiple classes because in the case of run they already will be
prompted to select the classes and in the case of runMain, they are
already required to specify the class name.
Bonus:
* improve punctuation
* add clear screen to selector dialogue
* print selector dialogue in one call to println -- this should prevent
the possibility of messages from other threads being interlaced with
the dialogue
This commit aims to centralize all of the terminal interactions
throughout sbt. It also seeks to hide the jline implementation details
and only expose the apis that sbt needs for interacting with the
terminal.
In general, we should be able to assume that the terminal is in
canonical (line buffered) mode with echo enabled. To switch to raw mode
or to enable/disable echo, there are apis: Terminal.withRawSystemIn and
Terminal.withEcho that take a thunk as parameter to ensure that the
terminal is reset back to the canonical mode afterwards.
When trying to use any jdk > 8 with the latest sbt, sbt will die in some
projects because it tries to call Locate.defineClass on rt.jar, which
is represented with a DummyVirtualFile and causes a crash.
Fixes https://github.com/sbt/sbt/issues/3112
This unpacks Extracted as State's extension methods.
In addition this provides a way of responding via LSP.
csrResolvers.all evaluates all possible scopes in arbitrary order. This change
makes sure at least the project resolvers are placed before any resolvers from
dependency projects.
When sbt was entered through xMain.run and the classloaders do not have
the expected format, sbt recreates the classloaders for itself.
Unfortunately the extra classpath was not added to the classloader. This
caused project/extra to fail if it was entered from RunFromSourceMain
rather than with the launcher.
The main reason for having both the RunFromSourceMain and LauncherBased
scripted tests was that RunFromSourceMain would fail for any test that
ended up accessing the sbt.Package$ object. This commit fixes this bug
by reworking the classloader generated by RunFromSourceMain to invoke
sbt, switching from the classpath to jar classpath (by setting exportJars =
true) and entering sbt by calling `new xMain().run` rather than
`xMain.run`.
The reason for switching to the jar classpath is that the jvm seems to
have issues when there are two classes provided in different directories
that have the same case insensitive name, e.g. `sbt.package$` and
`sbt.Package$`. If those classes are instead provided in different
jars, the jvm seems to be able to handle it.
Exporting the jars is not enough though, I had to rework the
ClassLoader created in the launch method to have a layout that was
recognized by xMainConfiguration. I reimplemented the AppConfiguration
in java so that it could bootstrap itself in a single jar classloader
(the only needed jar is the Scripted.
If we export the jars in the build, then the NoClassDefErrors for
`sbt.Package$` go away during scripted tests using RunSourceFromMain.
This might make running tests in subprojects slightly slower but I think
its a worthy tradeoff.
In order for the sbt launcher to be able to resolve a local version of
sbt, we must publish the main jar, the sources jar, the doc jar, the pom
and an ivy.xml file. The publish and publishLocal tasks are wired in
IvyXml.scala to create an ivy.xml file before running publish. This
wasn't done with publishLocalBin which made it not work when no ivy.xml
file was already present (which was the case after running clean).
either create test reports with legacy file names (legacyreport=true) or with standard file names (legacyreport=false or omitted) but not both as suggested in #4451
Fixes https://github.com/sbt/sbt/issues/5339
It seems like some tests are using `ClassLoader#getResource("")` to acquire the `classes` directory path. This does not seem to work on sbt 1.3.6, which returns `file:/home/travis/.cache/coursier/v1/https/repo1.maven.org/maven2/org/apache/logging/log4j/log4j-api/2.11.2/log4j-api-2.11.2.jar!/META-INF/versions/9/`. To workaround this issue, I've switched to loading the known folder name instead.
In 53788ba356, I changed the cross multi
parser to issue all of the commands sequentially. This caused a
performance regression for many use cases:
https://github.com/sbt/sbt/issues/5321. This commit restores the old
behavior of `+` if the command to run has no arguments.
Ref https://github.com/sbt/sbt/issues/5314
Ref https://github.com/sbt/sbt/pull/5265
In sbt 1.3.4, it's possible to define a subproject named `client`.
The current parser behaves differently whether we calll `client/clean` or `client / clean` with whitespaces. The one with the whitespace invokes `client` command (as in thin client). This gets triggered by `+clean` because the new implementation uses whitespace.
There have been a number of issues that have come up because of sbt
1.3.0 aggressively closing classloaders. While these issues have been
quite useful in helping us determine some issues related to classloader
lifecycle, we should give users the option to prevent sbt from closing
the classloaders.
I also noticed that the classloader-cache/spark test has been
occasionally segfaulting on travis so I disable classloader closing in
that test.
Fixes https://github.com/sbt/sbt/issues/5063
This fixes "sbt new" on Ubuntu by restoring the terminal state after supershell querying for the terminal width.
sbt should not by default create files in the location specified by
java.io.tmpdir (which is the default behavior of apis like
IO.createTemporaryDirectory or Files.createTempFile) because they have a
tendency to leak and it also isn't even guaranteed that the user has
write permissions there (though this is unlikely). Doing so creates the
possibility for leaks
I git grepped for `createTemp` and found these apis. After this change,
the files created by sbt should largely be localized to the project and
sbt global base directories.
Closing the ManagedClassLoader generated by test can cause nonlocal
effects because the jdk shares some JarFile resources across multiple
URLClassLoaders. As a result, if one classloader is trying to load a
resource and the classloader is closed, it might cause the resource
loading to fail (see https://github.com/sbt/sbt/issues/5262). This can
be fixed by moving the scalatest framework jar (and its dependencies)
into an additional classloader layer that sits between the scala library
loader and the rest of the test dependencies.
In addition to adding the new layer, I reworked the
ReverseLookupClassLoader to use its dependent classloader to find
resources that may below it in the classloading hierarchy rather than
constructing an entirely new classloader for resources.
After this change, I was able to run test in the repro project:
https://github.com/rjmac/sbt-5262 1000 times with no failures. Note that
the repro is sensitive to the jdk used. I could not reproduce with jdk11
but I could typically induce a failure within 20 or so runs with jdk8.
I benchmarked this change with
https://github.com/eatkins/scala-build-watch-performance and performance
was roughly the same as 1.3.4 with turbo mode and about 200-250ms faster
in non-turbo mode (which can be explained by the time to load the
scalatest classes).
This makes it possible to do mkIvyConfiguration.value.withXXX(...) for
all the methods in InlineIvyConfiguration. (I need this to remove
inter-project resolvers when fetching dotty from sbt-dotty to avoid
accidentally fetching a local project in the build of dotty itself).
The previous implementation of ZombieClassLoader was not thread safe.
This caused problems because it is possible for the ManagedClassLoader
in test to leak into the coursier thread pool if the test uses bouncy
castle apis. Unfortunately, these apis seem to in some cases assign
static variables using the Thread context class loader. Because the
bouncycastle apis are implemented by the jdk, they are found in the
system classloader and thus the static references leak out of the test
context.
I had a local repro of https://github.com/sbt/sbt/issues/5249 that is
fixed by this change.
I found it hard to reason about where certain local variables, like
currentRef, were coming from. I also changed 'x' to 'extracted' in a few
places for clarity as well.
Rather than putting the background job temporary files in whatever
java.io.tmpdir points to, this commit moves the files into a
subdirectory of target in the project root directory.
To make the directory configurable via settings, I had to move the
declaration of the bgJobService setting later in the project
initialization process. I don't think this should matter because
background jobs shouldn't be created until after the project has loaded
all of its settings..
When a user calls sbt exit and there is an active background job, sbt
may not exit cleanly. This was primarily because the
background job service shutdown method depended on the
StandardMain.executionContext which was closed before the background job
service was shutdown. This was fixable by reordering the resource
closing in StandardMain.runManaged.
When running a main method, if the user inputs ctrl+c then the `run`
task will exit but the main method is not interrupted so it continues
running even once sbt has returned to the shell. If the main method is a
webserver, this prevents run from ever starting again on a fixed port.
To fix this, we can modify the waitForTry method to stop the job if an
exception is thrown (ctrl+c leads to an interrupted exception being
thrown by waitFor).
I rework the BackgroundJobService so that the default implementation of
waitForTry is now usable and no longer needs to be overridden. The side
effect of this change is that waitFor may now throw an exception. Within
sbt, waitFor was only used in one place and I reworked it to use
waitForTry instead. This could theoretically break a downstream user who
relied on waitFor not throwing an exception but I suspect that there
aren't many users of this api, if any at all.
The StateTransform class introduced in
9cdeb7120e did not cleanly integrate with
logic for transforming the state using the `transformState` task
attribute. For one thing, the state transform was only applied if the
root node returned StateTransform but no transformation would occur if a
task had a dependency that returned StateTransform. Moreover, the
transformation would override all other transformations that may have
occurred during task evaluation.
This commit updates StateTransform to act very similarly to the
transformState attribute. Instead of wrapping a `State` instance, it now
wraps a transformation function from `State => State`. This function
can be applied on top of or prior to the other transformations via the
`transformState`.
For binary compatibility with 1.3.0, I had to add the stateProxy
function as a constructor parameter in order to implement the `state`
method. The proxy function will generally throw an exception unless the
legacy api is used. To avoid that, I private[sbt]'d the legacy api so
that binary compatibility is preserved but any builds targeting > 1.4.x
will be required to use the new api.
Unfortunately I couldn't private[sbt] StateTransform.apply(state: State)
because mima interpreted it as a method type change becuase I added
StateTransform.apply(transform: State => State). This may be a mima bug
given that StateTransform.apply(state: State) would be jvm public even
when private[sbt], but I figured it was quite unlikely that any users
were using this method anyway since it was incorrectly implemented in
1.3.0 to return `state` instead of `new StateTransform(state)`.
The linting can take a while for large projects because `Def.compiled`
scales in the number of settings. Even for small projects (i.e. scripted
tests), it takes about 50 ms on my computer. This doesn't change the
current behavior because the default value is true.
This PR includes the values of the `description` and `homepage`
settings into the `ivy.xml` files generated by the `makeIvyXml`
task. It restores the behaviour of sbt 1.2.8 and if `useCoursier`
is set to `false`.
Two things are changed in this PR:
* `IvyXml.content` now adds the `homepage` attribute to the
`description` element if `project.info.homePage` is not empty.
* `CoursierInputsTasks.coursierProject0` now fills the previous
empty `CProject.info` field with the description and homepage.
Closes: #5234
Ref #4211Fixes#4395Fixes#4600
This is a reimplementation of `--addPluginSbtFile`. #4211 implemented the command to load extra `*.sbt` files as part of the global plugin subproject. That had the unwanted side effects of not working when `.sbt/1.0/plugins` directory does not exist. This changes the strategy to load the `*.sbt` files as part of the meta build.
```
$ sbt -Dsbt.global.base=/tmp/hello/global --addPluginSbtFile=/tmp/plugins/plugin.sbt
[info] Loading settings for project hello-build from plugin.sbt ...
[info] Loading project definition from /private/tmp/hello/project
sbt:hello> plugins
In file:/private/tmp/hello/
sbt.plugins.IvyPlugin: enabled in root
sbt.plugins.JvmPlugin: enabled in root
sbt.plugins.CorePlugin: enabled in root
sbt.ScriptedPlugin
sbt.plugins.SbtPlugin
sbt.plugins.SemanticdbPlugin: enabled in root
sbt.plugins.JUnitXmlReportPlugin: enabled in root
sbt.plugins.Giter8TemplatePlugin: enabled in root
sbtvimquit.VimquitPlugin: enabled in root
```
Ethan Atkins
eugene yokota
adpi2
Maksim Ochenashko
Brice Jaglin
Dale Wijnand
Alexandre Archambault
frosforever
Erwan Queffelec
Anil Kumar Myla
João Ferreira
Alex Zolotko
Arnout Engelen
Jannik Theiß
Renato Cavalcanti
Heikki Vesalainen
Guillaume Martres
Jason Pickens
Frank S. Thomas