When sbt is starting up and there is an error with the build loading, we
need to read input from the user to determine to restart the build or
not. What is tricky is that there are potentially two sources of input:
thin clients connected through the boot server socket and the actual sbt
console process. If there are not connected thin clients and no system
console is available, we should return -1 in System.in.read, which will
cause sbt to exit.
A user reported that no prompt was displayed when they used sbt from the
jEdit console. The reason no prompt was displayed was because
System.console was null which caused the ConsoleChannel to be
initialized with its prompt set to NoPrompt. I don't remember why it was
doing this but this bug seems worse than whatever it was trying to
address.
In the client test, the sbt server would keep open the the client
connection even after it had exited because the client was only shutting
down its side of the connection. Since in the test it wasn't exiting the
jvm, the read side of the connection was still open.
It is possible for the test cases in ClientTest to block indefinitely.
To avoid that, we can instead run them on a background thread and cancel
the thread if that happens.
CI hung in the server test that checks completions because I broke
reading from the System.in. It occurred to me that we probably shouldn't
prompt indefinitely when the user is running tab completions anyway so I
set a timeout of 5 seconds for the user to respond to input. If they
decline to start a server within the timeout, we will just exit. If they
decline to run compilation within the timeout we just skip the
compilation step (so test or main class names will not be provided for
completions).
There were a number of issues with swithcing between raw and canonical
issues that affected both the server and the thin client. These were
reported in #5863 and #5856. In both cases, there were issues with
reading input or having the input be displayed. Debugging those issues
revealed a number of issues with how we were using the jline 3 system
terminal and the hybrid interaction with the jline 2 terminal. This
commit eliminates all of our internal jline 2 usage. The only remaining
jline 2 usage is that we create and override the global terminal for the
scala console for scala versions < 2.13. By moving away from jline 2, I
was also able to fix#5828, which reported that the home, end and delete
keys were not working.
One of the big issues that this commit addresses is that the
NetworkClient was always performing blocking reads on System.in. This
was problematic because it turns out that you can't switch between raw
and canonical modes when there is a read present. To fix this, the
server now sends a message to the client when it wants to read bytes and
only then does the client create a background thread to read a single
byte.
I also figured out how to set the terminal type properly for the thin
client on windows where we had been manually setting the capabilities to
ansi, which only worked for some keys. This fix required switching to
the WindowsInputStream that I introduced in a prior commit. Before we
were using the jline 2 wrapped input stream which was converting some
system events, like home and end, to the wrong escape sequence mappings.
The remainder of the commit is mostly just converting from jline 2 apis
to jline 3 apis.
I verified that tab completions, the scala console, the ammonite console
and a run task that read from System.in all work with both the server
and the thin client on mac, linux and windows after these changes.
Fixes#5828, #5863, #5856
There are situations in windows where it is possible that a client
attempts to connect to a portfile that it did not have access to. This
can happen if, for example, the server is started in administrator mode
but the client is started as a regular user. When this happens, the
client would try to remove the portfile and start a new server. This new
server would not actually be able to start a server though becuase it
would not be able to open the named point because the other server had
it open. As a result, the client would just hang. The fix is to just
abort the thin client if it gets an access denied exception.
When a json rpc request is specified without any headers, the size of
the message may exceed the buffer that was created for reading hdeaders.
This would cause an exception to be thrown when creating a string from
the header buffer because the number of bytes requested would exceed the
capacity of the buffer. To fix this, we can expand the buffer
dynamically if needed. For the common case when the headers are
specified, this should be a no-op.
Ref https://github.com/sbt/sbt/issues/5665
This adds `--server` command that is immediately filtered out in Main.scala.
The purpose of `--server` is so we can invoke thin client from `sbt` script at some point in the future when Bash script can parse `project/build.properties`.
`sbtn` would need to call `sbt` again to start the server, and at that point the shell script would need to actually invoke the server. The intent of `--server` is to be used as the tie breaker.
Also build users may want to sometimes call `sbt --server`.
I introduced the terminalShellPrompt so that we could generate a prompt
that was colored only if the terminal supported color. Rather than
expose the terminal implementation detail, we can just use a boolean
flag that toggles whether or not color is enabled and sbt can pass in
the value of terminal.isColorEnabled into the function.
sbt 1.4.0 generates the shell prompt using the terminal properties for
the specific terminal for which the prompt is rendered. The mechanism
for doing this broke the prompt for projects that overrode the
shellPrompt key, notably the play plugin. After this change, the play
custom prompt is correctly rendered with 1.4.0-SNAPSHOT.
When starting sbt via the thin client with 1.4.0-RC1, there is no output
until sbt finishes booting up which is poor ux. The reason is that sbt
only uses virtual io when sbt.io.virtual == true or formatEnabledInEnv
== true and not ci. The default value for formatEnabledInEnv is set
based on whether color is enabled in the environment. This had copied
old logic that turned on color if ansi was enabled but it makes more
sense to check the color property (which is set by the thin client via
an environment variable when it launches sbt) and fall back to whether
or not java.lang.System.console is defined. We also can explicitly set
"-Dsbt.io.virtual=true" when the thin client launches sbt since the thin
client relies on this behavior. By doing it in both places, the sbtn
for 1.4.0-RC1 will display boot output for newer versions of sbt.
Bonus: don't call ConsoleAppender.formatEnabledInEnv which just calls
back to Terminal.formatEnabledInEnv
The sbt.log.noformat parameter should be treated very similarly to
sbt.io.virtual. When it is true, we should just use the raw io streams
for the process. This came up because of
https://github.com/sbt/sbt/issues/5784 which reported that intellij
imports were not working and that ansi control characters were being
written to the output.
There can be race conditions where we try to interrupt and join a ui
thread before it becomes interruptible by blockign on a queue. To
workaround this, we can add the JoinThread class which adds an
extension method Thread.joinFor that takes a FiniteDuration parameter.
This variant of join will repeatedly interrupt and attempt to join the
thread for up to 10 milliseconds before retrying until the limit is
reached. If the limit is reached, we print a noisy error to the console.
I'm not 100% sure if we are leaking threads in the latest sbt version
but this gives me more piece of mind that either we are always
successfully joining the threads or we will be alerted if the joining
fails.
When exiting the thin client, an interrupted exception stack trace ends
up being printed because NonFatal doesn't include interrupted
exceptions.
Fixes https://github.com/sbt/sbt/issues/5759
Fixes https://github.com/sbt/sbt/issues/5039
Fixes https://github.com/sbt/sbt/issues/4989
This is take 2 on the semicolon fix by emptying out the completion examples in the multi parser.
```
> set scalaV
```
would complete to
```
> set scalaVersion
```
and more importantly
```
coursierUseSbtCredentials := true
```
errors to
```
sbt:hello> coursierUseSbtCredentials := true
[error] Expected ID character
[error] Not a valid command: coursierUseSbtCredentials
[error] Expected project ID
[error] Expected configuration
[error] Expected ':'
[error] Expected key
[error] Not a valid key: coursierUseSbtCredentials (similar: csrExtraCredentials, credentials)
[error] coursierUseSbtCredentials := true
[error] ^
```
With the latest sbt snapshot, the ui would get stuck if the user entered
an empty command. They would be presented with an empty prompt and could
not input any commands. This was caused by the change in
d569abe70a that reset the prompt after a
line was read. I had tried to optimize line reading by ignoring empty
commands in UITask.readline so we wouldn't have to make a new thread.
This optimization wasn't really buying much since it only affects how
quickly the user is reprompted after entering an empty command. Unless a
user is spamming the <enter> key, they shouldn't notice a difference.
It was a bit tricky to reason about the state of the prompt for a
terminal. To help make things more clear, I reworked things so that the
LineReader always sets the prompt to Pending after it reads a command.
In MainLoop, we cache the prompt value and temporarily set it to Running
while the command is running, which is really how it should have always
been.
In order to make the console task work with scala 2.13 and the thin
client, we need to provide a way for the scala repl to use an sbt
provided jline3 terminal instead of the default terminal typically built
by the repl. We also need to put jline 3 higher up in the classloading
hierarchy to ensure that two versions of jline 3 are not loaded (which
makes it impossible to share the sbt terminal with the scala terminal).
One impact of this change is the decoupling of the version of
jline-terminal used by the in process scala console and the version
of jline-terminal specified by the scala version itself. It is possible
to override this by setting the `useScalaReplJLine` flag to true. When
that is set, the scala REPL will run in a fully isolated classloader. That
will ensure that the versions are consistent. It will, however, for sure
break the thin client and may interfere with the embedded shell ui.
As part of this work, I also discovered that jline 3 Terminal.getSize is
very slow. In jline 2, the terminal attributes were automatically cached with a
timeout of, I think, 1 second so it wasn't a big deal to call
Terminal.getAttributes. The getSize method in jline 3 is not cached and
it shells out to run a tty command. This caused a significant
performance regression in sbt because when progress is enabled, we call
Terminal.getSize whenever we log any messages. I added caching of
getSize at the TerminalImpl level to address this. The timeout is 1
second, which seems responsive enough for most use cases. We could also
move the calculation onto a background thread and have it periodically
updated, but that seems like overkill.
There are cases where if the ui state is changing rapidly, that an
AskUserThread can be created and cancelled in a short time windows. This
could cause problems if the AskUserThread is interrupted during
`LineReader.createReader` which I think can shell out to run some
commands so it is relatively slow. If the thread was interrupted during
the call to `LineReader.createReader` and the interruption was not
handled, then the thread would go into `LineReader.readLine`, which
wouldn't exit until the user pressed enter. This ultimately caused the
ui to break until enter because this zombie line reader would be holding
the lock on the terminal input stream.
Rather than relying on a command, I realized it makes more sense to
explicitly set the terminal for the calling channel in MainLoop. By
doing it this way, we can also ensure that we always reset it to the
previous value.
This reverts commit b1dcf031a5.
I found that b1dcf031a5 had some
unintended consequences that seemed to mess up the prompt state. The
real problem that it was trying to address was that the prompt was being
interleaved with log messages in some scenarios. There was a different
way to fix that in ProgressState that was both simpler and more
reliable.
I noticed that when reloading the build, that certain errors are logged
by sbt to System.err. These were not shown to a thin client because we
weren't forwarding System.err. This change remedies that.
System.err is handled more simply than System.out. We do not put
System.err through the progress state because generally System.err is
tends to be unbuffered. I had hesitated to add System.err to the
Terminal interface at all to give users an escape hatch but I couldn't
get project loading to work well with the thin client without it.
It is useful to store a buffer of the lines written to each terminal. We
can use those lines to replay the terminal log lines to a different
client. This is particularly nice when a remote client connects to sbt
while it's booting. We can show the remote client all the lines
displayed by the console prior to the client connecting.
This commit upgrades sbt to using jline3. The advantage to jline3 is
that it has a significantly better tab completion engine that is more
similar to what you get from zsh or fish.
The diff is bigger than I'd hoped because there are a number of
behaviors that are different in jline3 vs jline2 in how the library
consumes input streams and implements various features. I also was
unable to remove jline2 because we need it for older versions of the
scala console to work correctly with the thin client. As a result, the
changes are largely additive.
A good amount of this commit was in adding more protocol so that the
remote client can forward its jline3 terminal information to the server.
There were a number of minor changes that I made that either fixed
outstanding ui bugs from #5620 or regressions due to differences between
jline3 and jline2.
The number one thing that caused problems is that the jline3 LineReader
insists on using a NonBlockingInputStream. The implementation ofo
NonBlockingInputStream seems buggy. Moreover, sbt internally uses a
non blocking input stream for system in so jline is adding non blocking
to an already non blocking stream, which is frustrating.
A long term solution might be to consider insourcing LineReader.java
from jline3 and just adapting it to use an sbt terminal rather than
fighting with the jline3 api. This would also have the advantage of not
conflicting with other versions of jline3. Even if we don't, we may want to
shade jline3 if that is possible.
If there is no system console available, then there is no point in
making an ask user thread. An ask user thread can only be created when
the terminal prompt is in the Prompt.Running or Prompt.Loading state.
The console channel will now set itself to be in the Prompt.NoPrompt
state if it detects that there is no System.console available.
The motivation for this change is that jline was printing a lot of extra
text during scripted and server tests. Whenever a jline3 linereader is
closed, it prints a newline so the logs were filled with unnecessary
newlines.
In the situation where sbt was started in server mode and a client is
running a `~` command and a project reload is triggered by a change to
a build source, the console terminal looks like
sbt:foo>
[info] received remote command: ~compile
sbt:foo>
[info] welcome to sbt 1.4.0-SNAPSHOT (Azul Systems, Inc. Java 1.8.0_252)
sbt:foo>
[info] loading global plugins from ~/.sbt/1.0/plugins
sbt:foo>
[info] loading settings for project foo-build from metals.sbt ...
sbt:foo>
[info] loading project definition from
~/foo/project
sbt:foo>
[info] loading settings for project root from build.sbt ...
sbt:foo>
[info] loading settings for project macros from build.sbt ...
sbt:foo>
[info] loading settings for project main from build.sbt ...
sbt:foo>
[info] set current project to foo (in build file:~/foo)
sbt:foo>
This change fixes that by unprompting all channels during project
loading and reprompting them when it completes.
Reboot is a bit tricky for the remote client because the sbt server is
actually shut down during reboot. When sbt shuts down the client, it can
notify the client that the reason is a reboot. The client can then
connect to the recently introduced boot control socket to display the
reboot output and supply input in case the build fails to load. Once the
server has brought back up the server, the client can reconnect. When
the client session is interactive, we're done once we reconnect. When
it's a batch session, the client needs to resend the remaing commands
that have submitted that it hasn't yet run.
When running reboot at the console, the first character that the user
enters after the reboot has completed is lost. This is because it isn't
possible to interrupt System.in and we have a thread that is blocking on
reads to System.in in WriteableInputStream. That thread cannot be
shutdown during normal sbt shutdown while it is reading. When sbt next
starts up (in the same jvm), the previous thread gets the byte but has
nowhere to write it so the byte is lost. This commit fixes that behavior
by ensuring that we only poll from System.in when there is actually a
downstream consumer.
The behavior of reboot is still a little wonky if the user issues a
reboot from a network client and then tries to input commands at the
console. In that case, sbt will have been polling System.in in the ask
user thread prior to the reboot and the ask user thread will be
uninterruptible for the reason described above so the first byte will
again by swallowed by the previous sbt instance. This use case is
sufficiently pathological that it doesn't feel worth the effort to fix.
As annoying as it is, it doesn't break the sbt session. The user will
either submit an invalid command with the missing leading character or
notice the character is missing, possibly think they missed the key,
type backspace a few times and re-type the command.
Shutdown was being handled as a special case in CommandExchange. This
promotes it to a full fledged command. Also replace instance of
hard-coded strings with constants.
When a remote client sent the command `shutdown` through the shell, the
client would log an error and exit with a nonzero exit code because
before shutting down, the server would notify the client that it was
disconnecting it due to shutdown. In this scenario, we actually do not
want the client to log an error since they initiated the shutdown, so
before doing the full shutdown, we shutdown the client that inititated
the shutdown with the flag that tells the client not to log the shutdown
or return a nonzero exit code.
One issue with the remote client approach is that it is possible for
multiple clients to start multiple servers concurrently. I encountered
this in testing where in one tmux pane I'd start an sbt server and in
another I might run sbtc before the server had finished loading. This
can actually cause java processes to leak because the second process is
unable to start a server but it doesn't necessarily die after the client
that spawned it exits. This commit prevents this scenario by creating a
server socket before it loads the build and closes once the build is
complete. The client can then receive output bytes and forward input to
the booting server.
The socket that is created during boot is always a local socket, either
a UnixDomainServerSocket or a Win32NamedPipeServerSocket. At the moment,
I don't see any reason to support TCP. This socket also has no impact at
all on the normal sbt server that is started up after the project has
loaded.
The socket is hardcoded to be located at the relative path
project/target/$SOCK_NAME or the named pipe $SOCK_NAME where SOCK_NAME
is a farm hash of the absolute path of the project base directory. There
is no portfile json since there is no need since we don't support TCP.
After the socket is created it listens for clients to whom it relays
input to the console's input stream and relays the process output back
to the client. See the javadoc in BootServerSocket.java for further
details.
The process for forking the server is also a bit more complicated after
this change because the client will read the process output and error
streams until the socket is created and thereafter will only read output
from the socket, not the process.
Supershell does not work correctly when the sbt server is started by the
remote client on windows because it incorrectly calculates the terminal
dimensions. To work around this, we can pass in the dimensions from the
remote client as an environment variable. I tried to do this as a system
property but had all kinds of problems with windows stripping delimeters
from the command. It was much easier to get working with an environment
variable and should really only be set by the sbtc client anyway.
It is inefficient to be constantly allocating and filling an
ArrayBuffer. The buffer is only used for reading headers that we mostly
discard anyway. My assumption is that since we only care about content
length, it's fine to put a fixed limit on the buffer size.
When the user ran a command like `testOnly foo -- bar`, the client was
incorrectly treating the `--` as an sbt argument. The assumption is that
once an argument is found that does not start with a `-`, then
everything following that argument is part of the command arguments.
The existing implementation of watch did not work with the thin client.
In sbt 1.3.0, watch was changed to be a blocking command that performed
manual task evaluation. This commit makes the implementation more
similar to < 1.3.0 where watch modifies the state and after running the
user specified command(s), it enters a blocking command. The new
blocking command is very similar to the shell command.
As part of this change, I also reworked some of the internals of watch
so that a number of threads are spawned for reading file and input
events. By using background threads that write to a single event queue,
we are able to block on the file events and terminal input stream rather
than polling. After this change, the cpu utilization as measured by ps
drops from roughly 2% of a cpu to 0.
To integrate with the network client, we introduce a new UITask that is
similar to the AskUserTask but instead of reading lines and adding execs
to the command queue, it reads characters and converts them into watch
commands that we also append to the command queue.
With this new implementation, the watch task that was added in 1.3.0 no
longer works. My guess is that no one was really using it. It wasn't
documented anywhere. The motivation for the task implementation was that
it could be called within another task which would let users define a
task that monitors for file changes before running. Since this had never
been advertised and is only of limited utility anyway, I think it's fine
to break it.
I also had to disable the input-parser and symlinks tests. I'm not 100%
sure why the symlinks test was failing. It would tend to work on my
machine but fail in CI. I gave up on debugging it. The input-parser test
also fails but would be a good candidate to be moved to the client test
in the serverTestProj. At any rate, it was testing a code path that was
only exercised if the user changed the watchInputStream method which is
highly unlikely to have been done in any user builds.
The WatchSpec had become a nuisance and wasn't really preventing from
any regressions so I removed it. The scripted tests are how we test
watch.
The sbtc client can provide a ux very similar to using the sbt shell
when combined with tab completions. In fact, since some shells have a
better tab completion engine than that provided by jilne2, the
experience can be even better. To make this work, we add another entry
point to the thin client that is capable of generating completions for
an input string. It queries sbt for the completions and prints the
result to stdout, where they are consumed by the shell and fed into its
completion engine.
In addition to providing tab completions, if there is no server running
or if the user is completing `runMain`, `testOnly` or `testQuick`, the
thin client will prompt the user to ask if they would like to start an
sbt server or if they would like to compile to generate the main class
or test names. Neither powershell nor zsh support forwarding input to
the tab completion script. Zsh will print output to stderr so we
opportunistically start the server or complete the test class names.
Powershell does not print completion output at all, so we do not start a
server or fill completions in that case*. For fish and bash, we prompt
the user that they can take these actions so that they can avoid the
expensive operation if desired.
* Powershell users can set the environment variable SBTC_AUTO_COMPLETE
if they want to automatically start a server of compile for run and test
names. No output will be displayed so there can be a long latency
between pressing <tab> and seeing completion results if this variable is
set.
This commit adds the ability for sbt to automatically shut itself down
if it has been idle for some duration of time. The motivation is that
if the user may not realize they have an sbt server running in the
background that is using resources. We don't want to be too aggressive
with the idle timeout because that can reduce the efficacy of the thin
client. A value of one week is chosen so that users can enjoy a long
weekend and when they return to their computer, they won't have to
restart sbt. If they haven't used the server in at least a week, it
seems prudent to just kill it.
The sbtipcsocket by default restricts win32 named pipes to only allow
connections from the same login session. This makes connecting to a
remote server not work over ssh. We relax the default slightly in sbt to
allow the owner of the pipe to connect over any logon shell. The user
could restore the old behavior with:
```
Global / windowsServerSecurityLevel := Win32SecurityLevel.LOGON_DACL
```
or, if YOLO
```
Global / windowsServerSecurityLevel := Win32SecurityLevel.NO_SECURITY
```
This project is used to create client executables. The implementation is
pure java but we can build graalvm native-images from the java main
class. There are two versions of the client. One of them uses the
ipcsocket jni implementation to connect to the sbt server while the
other uses jna. It is necessary to use jni for the graalvm native-image
tool to work. Otherwise the two approaches should be identical.
When we start sbt with the thin client, we want to close the server io
streams after it loads so that the client exiting won't crash the
server. When we are running the server as part of the server tests, it
is nice to have the server output. By setting the --close-io-streams
flag when we launch the server in the client, we are able to achieve
both.
Running multi commands (input commands delimited by semi-colons) did not
work with the thin client. The commands would actually run on the
server, but the thin client would exit immediately without displaying
the output. The reason was that MainLoop would report the exec complete
when all it had done was split the original command into its constituent
parts and prepended them to the state command list. To work around this,
when we detect a network source command, we can remap its exec id to a
different id and only report the original exec id after the commands
complete. We also have to keep track of whether or not the command
succeeded or failed so that the reporting command reports the correct
result.
The way its implemented is with the the following steps:
1. set the terminal to the network terminal
2. stash the current onFailure so that we can properly report failures
3. add the new exec id to a map of the original exec id to the generated
id
4. actually run the command
5. if the command succeeds, add the original exec id to a result map
6. pop the onFailure
7. restore the terminal to console
8. report the result -- if the original exec id is in the result map we
report success. Otherwise we report failure.
There is also logic in NetworkChannel for finding the original exec id
if reporting one of the artificially generated exec ids because the
client will not be aware of that id.
When the user presses ctrl+c, we want to cancel any running tasks that
were initiated by that client. This is a bit tricky because we may not
be sure what is running if the client is in interactive mode. To work
around this, we send a cancellation request with the special id
__CancelAll. When the NetworkChannel receives this request, it cancels
the active task if was initiated by the client that sent the
cancellation request. The result it returns to the client indicates if
there were any tasks to be cancelled. If there were and the client was
in interactive mode, we do not exit. Otherwise we exit.
This commit integrates the NetworkClient with the server side rendered
ui. Rather than implementing its own shell method, it will now connect
to the server and register itself as a virtual terminal. If there are
command arguments, those will be sent to the server as execs. Otherwise
it will enter a shell mode where it just acts as a relay for io.
In batch mode, it will return the exit code of the last exec sent to the
server. If the server disconnects, the client will exit with an error code.
This commit makes it possible for the sbt server to render the same ui
to multiple clients. The network client ui should look nearly identical
to the console ui except for the log messages about the experimental
client.
The way that it works is that it associates a ui thread with each
terminal. Whenever a command starts or completes, callbacks are invoked
on the various channels to update their ui state. For example, if there
are two clients and one of them runs compile, then the prompt is changed
from AskUser to Running for the terminal that initiated the command
while the other client remains in the AskUser state. Whenever the client
changes uses ui states, the existing thread is terminated if it is
running and a new thread is begun.
The UITask formalizes this process. It is based on the AskUser class
from older versions of sbt. In fact, there is an AskUserTask which is
very similar. It uses jline to read input from the terminal (which could
be a network terminal). When it gets a line, it submits it to the
CommandExchange and exits. Once the next command is run (which may or
may not be the command it submitted), the ui state will be reset.
The debug, info, warn and error commands should work with the multi
client ui. When run, they set the log level globally, not just for the
client that set the level.
In the previous version of the NetworkClient, there was no feedback
while the client was starting up. It was also possible that if the
server had exited abruptly and there was a dead active.json portfile
left over, that the client wouldn't be able to start the server.
This commit reworks things so that we launch the server with a java
process and we print out the stdout, stderr streams from the process. We
also forward the client's stdin in case the server couldn't be started
and the user wants to retry or print the stacktrace.
This commit adds support for remote clients to connect to the sbt server
and attach themselves as a virtual terminal. In order to make this work,
each connection must send a json rpc request to attach to the server.
When this is received, the server will periodically query the remote
client to get the terminal properties and capabilities that allow the
remote client to act as a jline terminal proxy. There is also support
for json messages with ids sbt/systemIn and sbt/systemOut that allow io
to be relayed from the remote terminal to the sbt server and back.
Certain commands such as `exit` should be evaluated immediately. To make
this work, we add the concept of a MaintenanceTask. The CommandExchange
has a background thread that reads MaintenanceTasks and evaluates them
on demand. This allows maintenance tasks to be evaluated even when sbt
is evaluating an exec. If it weren't done this way, when the user typed
exit while a different remote connection was running a command, they
wouldn't be able to exit until the command completed.
The ServerIntents in ServerHandler did not handle
JsonRpcResponseMessage because prior to this commit, sbt clients were
primarily making requests to the server. But now the server sends
requests to the client for the terminal properties and terminal
capabilities so it was necessary to add an onResponse handler to
ServerIntent.
I had to move the network channel publishBytes method to run on a
background thread because there were scenarios in which the client
socket would get blocked because the server was trying to write on the
same thread that the read the bytes from the client.
To make the console command work, it is necessary to hijack the
classloader for JLine. In MetaBuildLoader, we put a custom forked JLine
that has a setter for the TerminalFactory singleton. This allows us to
change the terminal that is used by JLine in ConsoleReader. Without this
hack, the scala console would not work for remote clients.
Neither The ConsoleAppender class nor the jni based ClientSocket can be
used in a graalvm native image. This commit reworks the NetworkClient so
that we can avoid those limitations. It also adds some additional
command line argument parsing and changes the value of the run method to
return Int rather than Unit for exit code support.
In order to support a multi-client sbt server ux, we need to factor
`Terminal` out into a class instead of a singleton. Each terminal provides
and outputstream and inputstream. In all of the places where we were
previously relying on the `Terminal` singleton we need to update the
code to use `Terminal.get`, which will redirect io to the terminal whose
command is currently running.
This commit does not implement the server side ui for network clients.
It is just preparatory work for the multi-client ui.
The Terminal implementations have thread safe access to the output
stream. For this reason, I had to remove the sychronization on the
ConsoleOut lockObject. There were code paths that led to deadlock when
synchronizing on the lockObject.
We had similar code for reading json frames from an input stream in
NetworkChannel and ServerConnection. I reworked and consolidated this
logic into a shared method in ReadJsonFromInputStream.
This commit also removes the ObjectMessage reporting methods that
weren't doing anything.
The collectAnalysis task an be a bit slow and delays client connections
from running commands. This commit adds an option to skip the analysis
if it isn't needed. The default behavior is left as it was.
Initial draft for bsp support.
This shows two communication pattern around BSP.
First, if the request can be handled with the build knowledge is readily available in `NetworkChannel` we can reply immediately. `BuildServerImpl#onBspBuildTargets` is an example for that.
Second, if the request requires `State`, then we can forward the parameter into a custom command, and reply back from a command. `BuildServerProtocol.bspBuildTargetSources` is an example of that since it needs to invoke tasks to generate sources.
It is better that sbt not expose the implementation detail that
LineReader is implemented by JLine. Other terminal related apis should
be handled by sbt.internal.util.Terminal.
Presently if a server command comes in while in the shell, the client
output can appear on the same line as the command prompt and the command
prompt will not appear again until the user hits enter. This is a
confusing ux. For example, if I start an sbt server and type
the partial command "comp" and then start up a client and run the clean
command followed by a compile, the output looks like:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
sbt:scala-compile> comp[info] new client connected: network-1
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:24 PM
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:27 PM
[success] Total time: 2 s, completed Dec 12, 2019, 7:23:31 PM
Now, if I type "ile\n", I get:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
ile
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:34 PM
sbt:scala-compile>
Following the same set of inputs after this change, I get:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
sbt:scala-compile> comp
[info] new client connected: network-1
[success] Total time: 0 s, completed Dec 12, 2019, 7:25:58 PM
sbt:scala-compile> comp
[success] Total time: 0 s, completed Dec 12, 2019, 7:26:14 PM
sbt:scala-compile> comp
[success] Total time: 1 s, completed Dec 12, 2019, 7:26:17 PM
sbt:scala-compile> compile
[success] Total time: 0 s, completed Dec 12, 2019, 7:26:19 PM
sbt:scala-compile>
To implement this change, I added the redraw() method to LineReader
which is a wrapper around ConsoleReader.drawLine; ConsoleReader.flush().
We invoke LineReader.redraw whenever the ConsoleChannel receives a
ConsolePromptEvent and there is a running thread.
To prevent log lines from being appended to the prompt line, in the
CommandExchange we print a newline character whenever a new command is
received from the network or a network client connects and we believe
that there is an active prompt.
The ask user thread is a background thread so it's fine for it to block
on System.in. By blocking rather than polling, the cpu utilization of
sbt drops to 0 on idle. We have to explicitly handle <ctrl+d> if we
block though because the JLine console reader will return null both if
the input stream returns -1
This commit aims to centralize all of the terminal interactions
throughout sbt. It also seeks to hide the jline implementation details
and only expose the apis that sbt needs for interacting with the
terminal.
In general, we should be able to assume that the terminal is in
canonical (line buffered) mode with echo enabled. To switch to raw mode
or to enable/disable echo, there are apis: Terminal.withRawSystemIn and
Terminal.withEcho that take a thunk as parameter to ensure that the
terminal is reset back to the canonical mode afterwards.
To demonstrate [-Yno-lub](http://eed3si9n.com/stricter-scala-with-ynolub), this shows the code changes that removes lubing (Not all subprojects are done).
After I made the changes, I switched the Scala back to normal 2.12.10.
During refactoring, these warnings got out of date. I also added
scaladoc to the watchTriggeredMessage key.
Ref: https://github.com/sbt/sbt/issues/5051.
eugene yokota
Ethan Atkins
Adrien Piquerez