I often find that when I run a command it takes a long time to start up
because sbt triggers a full gc. To improve the ux, I update the command
exchange to run full gc only once while it's waiting for a command to
run and only after the user has been idle for at least one minute.
Bonus: optimize imports
Previously, we were leaking the internal details of incremental
compilation to users by defining FileTree(DataView|Repository)[Stamp].
To avoid this, I introduce the new class FileCacheEntry that is quite
similar to Stamp except defined using scala Options rather than java
Optionals. The implementation class just delegates to an actual Stamp
and I provided a private[sbt] ops class that adds a
method `stamp` to FileCacheEntry. This will usually just extract the
stamp from the implementation class. This allows us to use
FileCacheEntry almost interchangeably with Stamp while still avoiding
exposing users to Stamp.
In the FileTreeDataView use case, we were previously working with
FileTreeDataView[Stamped], which actually contained a lot of redundant
information because FileTreeDataView.Entry[_] has a toTypedPath method
that could be used to read the path related fields in Stamped. Instead,
we can just return the Stamp itself in FileTreeDataView.list* methods
and convert to Stamped.File where needed (i.e. in ExternalHooks).
Also move BasicKeys.globalFileTreeView to Keys since it isn't actually
used in the main-command project.
Resident compilation actually works pretty well most of the time*,
but if there ever is an issue with the cached compilation, we should be
able to easily clear the cache.
* I've only had issues when package objects are involved
If the managedSources task writes into an unmanaged source directory,
that would cause an infinite loop. I don't think it's worth doing out of
band task execution to try and prevent this.
While the AnyLeft and AnyRight types are necessary to make the extension
class work, I don't want to leak the AnyLeft or AnyRight traits into the
public api. It wasn't neceessary to annotate `some`, but it's good
practice to annotate anything public anyway.
I'm not sure if this is a huge benefit or not, but it's nice to have the
option to run the scripted tests in parallel. The default behavior
should be the same as before.
We had previously used reflection to load the bridge class, but
continued using sbt's default classloader. This was problematic because
the metabuild could have a different classpath from that required by the
scripted tests.
Bonus: scalafmt
Fixes: #4514
The scaladoc task was warning:
'Could not find any member to link for "LinterLevelLowPriority"'. Given
that LinterLevelLowPriority is a package private trait, it shouldn't be
mentioned by name.
The community build was broken for some projects because I broke builds
that relied on the unscoped definition of `runner`. To preserve legacy
behavior, I restore the old unscoped behavior and append the new scoped
runners that used the layered classloaders. This makes more sense
because the layered classloaders were specifically designed for the
Runtime and Test configurations and may not make sense in other
contexts.
I noticed that sometimes when running scripted tests that I'd run out of
metaspace. I believe that this may be due to the caffeine cache leaking
classloaders. Regardless, it's a good idea to clear the cache whenever
we shutdown the command exchange or reload the state.
Previously, the ClassLoaderLayeringStrategy was set globally. This
didn't really make sense because the Runtime and Test configs had
different strategies available (Test being a superset of Runtime).
Instead, we now set the layering strategy in the Runtime and Test
configurations directly. In doing this, we can eliminate the Default
ClassLoaderLayeringStrategy. Previously this had existed so that we
could set the layering strategy globally and have it do the right thing
in both test and runtime.
To implement this, I factored out the logic for generating the layered
classloader in the test task and shared it with the runtime task. I did
this because I realized that Test / run is a thing. Previously I had
been operating under the assumption that the runner would never include
the test dependencies. Once I realized this, it made sense to combine
the logic in both tasks.
As a bonus, I only allow the layering strategies that explicitly make
sense to be set in each configuration. If the user sets an invalid
strategy, an error will be thrown that specifies the valid strategies
for the task.
I also added ScalaInstance as an option for the runtime layer. It was an
oversight that this was left out.
In code review, @eed3si9n suggested that I switch to a more verbose and
descriptive naming scheme. In addition to trying to make layers more
descriptive, I also made the various layer case objects extend the
relevant layers so it's more clear what the layer should look like.
I was seeing spurious travis failures and I finally tracked it down to
the fact that in some cases, the project metabuild would sometimes use a
caching file tree repository instead of a polling repository. This
caused problems because the caching repository can take a few milliseconds
to detect changes in a directory. Because scripted copies the project
sources to the temporary test directory, it was possible for the project
meta build compilation to be initiated before the cache was aware of all
of the files.
The reason this happened was because scripted would create a state where
the remaining commands looked like:
List(sbtPopOnFailure, resumeFromFailure, notifyUsersAboutShell, iflast shell, ~compile, < 41684)
The ~compile command was causing the continuous flag to get set to true
which caused the default file tree repository task to return the caching
version. The reason for the continuous flag was so that when sbt is
started in a non-interactive mode where the command is to be repeated,
then we use the caching file tree repository. To support this use case,
we just need to check that the last command begins with `~`, not that
_any_ command begins with `~`.
We want the user to be able to invalidate the classloader cache in the
event that it somehow gets in a bad state. The cache is, however,
defined in multiple configurations, so there are in fact many
ClassLoaderCache instances that are managed by sbt. To make this sane, I
add a global cache that is keyed by a TaskKey[_] and can return
arbitrary data back. Invalidating all of the ClassLoaderCache instances
is then as straightforward as just replacing the TaskRepository
instance.
I also went ahead and unified the management of the global file tree
repository. Instead of having to specifically clear the file tree
repository or the classloader cache, the user can now invalidate both
with the new clearCaches command.
Normally I'd include these with the previous commit, but the diff is so
large that I put them in their own commit. The tests handle 5 scenarios:
1) akka-actor-system -- a project that has Akka as a dependency and a
simple main method that creates and terminates an ActorSystem. What
is interesting about this test is that if scriptedBufferLog := false,
we notice that the first call to run is slow, but subsequent calls to
run and test are fast. The test does at least ensure that recycling
the runtime layer in test works ok.
2) jni -- verifies that a project with native libraries will be able to
load the library with each run. It actually swaps out the underlying
library so that the it really ensures that the library is reloaded
between runs.
3) library-mismatch -- verifies that the layered classloaders can work
when the test dependencies are incompatible with the runtime
dependencies. In this test, the test dependencies use an api in a
library called foo-lib that isn't available in the version used by
the runtime dependencies. Because of this incompatibility, the test
will not work if Test / layeringStrategy := LayeringStrategy.Full.
4) scalatest -- verifies that a test runs using the scalatest framework
5) utest -- verifies that a test runs using the utest framework
The reason for (4) and (5) is to ensure that both the in sourced test
frameworks and external frameworks work with the new loaders.
Using the data structures that I added in the previous commits, it is
now possible to rework the run and test task to use (configurable)
layered class loaders. The layering strategy is globally set to
LayeringStrategy.Default. The default strategy leads to what is
effectively a three layered ClassLoader for the both the test and run
tasks. The first layer contains the scala instance (and test framework
loader in the test task). The second layer contains all of the
dependencies for the configuration while the third layer contains the
project artifacts.
The layering strategy is very easily changed both at the Global or
Configuration level, e.g. adding
Test / layeringStrategy := LayeringStrategy.Flat
to the project build.sbt will make the test task not even use the scala
instance and instead a create a single layer containing the full
classpath of the test task.
I also tried to ensure that all of the ClassLoaders have good toString
overrides so that it's easy to see how the ClassLoader is constructed
with, e.g. `show testLoader`, in the sbt console.
In this commit, the ClassLoaderCache instances are settings. In the next
commit, I make them tasks so that we can easily clear out the caches
with a command.
Jason Zaugg
Ethan Atkins
eugene yokota
Guillaume Martres
Dale Wijnand