In order to make supershell work with println, this commit introduces a
virtual System.out to sbt. While sbt is running, we override the default
java.lang.System.out, java.lang.System.in, scala.Console.out and
scala.Console.in (unless the property `sbt.io.virtual` is set to
something other than true). When using virtual io, we buffer all of the
bytes that are written to System.out and Console.out until flush is
called. When flushing the output, we check if there are any progress
lines. If so, we interleave them with the new lines to print.
The flushing happens on a background thread so it should hopefully not
impede task progress.
This commit also adds logic for handling progress when the cursor is not
all the way to the left. We now track all of the bytes that have been
written since the last new line. Supershell will then calculate the
cursor position from those bytes* and move the cursor back to the
correct position. The motivation for this was to make the run command
work with supershell even when multiple main classes were specified.
* This might not be completely reliable if the string contains ansi
cursor movement characters.
Presently if a server command comes in while in the shell, the client
output can appear on the same line as the command prompt and the command
prompt will not appear again until the user hits enter. This is a
confusing ux. For example, if I start an sbt server and type
the partial command "comp" and then start up a client and run the clean
command followed by a compile, the output looks like:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
sbt:scala-compile> comp[info] new client connected: network-1
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:24 PM
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:27 PM
[success] Total time: 2 s, completed Dec 12, 2019, 7:23:31 PM
Now, if I type "ile\n", I get:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
ile
[success] Total time: 0 s, completed Dec 12, 2019, 7:23:34 PM
sbt:scala-compile>
Following the same set of inputs after this change, I get:
[info] sbt server started at local:///Users/ethanatkins/.sbt/1.0/server/51cfad3281b3a8a1820a/sock
sbt:scala-compile> comp
[info] new client connected: network-1
[success] Total time: 0 s, completed Dec 12, 2019, 7:25:58 PM
sbt:scala-compile> comp
[success] Total time: 0 s, completed Dec 12, 2019, 7:26:14 PM
sbt:scala-compile> comp
[success] Total time: 1 s, completed Dec 12, 2019, 7:26:17 PM
sbt:scala-compile> compile
[success] Total time: 0 s, completed Dec 12, 2019, 7:26:19 PM
sbt:scala-compile>
To implement this change, I added the redraw() method to LineReader
which is a wrapper around ConsoleReader.drawLine; ConsoleReader.flush().
We invoke LineReader.redraw whenever the ConsoleChannel receives a
ConsolePromptEvent and there is a running thread.
To prevent log lines from being appended to the prompt line, in the
CommandExchange we print a newline character whenever a new command is
received from the network or a network client connects and we believe
that there is an active prompt.
Prior to this change, if a network command came in, it would run in the
background with no real feedback in the server ui. Prior to this change,
running compile from the thin client would look like:
sbt:scala-compile>
[success] Total time: 1 s, completed Dec 12, 2019, 7:24:43 PM
sbt:scala-compile>
Now it looks like:
sbt:scala-compile>
[info] Running remote command: compile
[success] Total time: 1 s, completed Dec 12, 2019, 7:26:17 PM
sbt:scala-compile>
It's a bit annoying to have to hit enter here.
Also, this should fix https://github.com/sbt/sbt/issues/5162 because if
there is no System.in attached, the read will return -1 which will cause
sbt to quit.
There typically are fewer than 10 main classes in a project so allow the
user to just input a single digit in those cases. Otherwise fallback to
a line reader.
When the user inputs `run` or `runMain` we shouldn't print the warning
about multiple classes because in the case of run they already will be
prompted to select the classes and in the case of runMain, they are
already required to specify the class name.
Bonus:
* improve punctuation
* add clear screen to selector dialogue
* print selector dialogue in one call to println -- this should prevent
the possibility of messages from other threads being interlaced with
the dialogue
This commit aims to centralize all of the terminal interactions
throughout sbt. It also seeks to hide the jline implementation details
and only expose the apis that sbt needs for interacting with the
terminal.
In general, we should be able to assume that the terminal is in
canonical (line buffered) mode with echo enabled. To switch to raw mode
or to enable/disable echo, there are apis: Terminal.withRawSystemIn and
Terminal.withEcho that take a thunk as parameter to ensure that the
terminal is reset back to the canonical mode afterwards.
When trying to use any jdk > 8 with the latest sbt, sbt will die in some
projects because it tries to call Locate.defineClass on rt.jar, which
is represented with a DummyVirtualFile and causes a crash.
Fixes https://github.com/sbt/sbt/issues/3112
This unpacks Extracted as State's extension methods.
In addition this provides a way of responding via LSP.
csrResolvers.all evaluates all possible scopes in arbitrary order. This change
makes sure at least the project resolvers are placed before any resolvers from
dependency projects.
When sbt was entered through xMain.run and the classloaders do not have
the expected format, sbt recreates the classloaders for itself.
Unfortunately the extra classpath was not added to the classloader. This
caused project/extra to fail if it was entered from RunFromSourceMain
rather than with the launcher.
The main reason for having both the RunFromSourceMain and LauncherBased
scripted tests was that RunFromSourceMain would fail for any test that
ended up accessing the sbt.Package$ object. This commit fixes this bug
by reworking the classloader generated by RunFromSourceMain to invoke
sbt, switching from the classpath to jar classpath (by setting exportJars =
true) and entering sbt by calling `new xMain().run` rather than
`xMain.run`.
The reason for switching to the jar classpath is that the jvm seems to
have issues when there are two classes provided in different directories
that have the same case insensitive name, e.g. `sbt.package$` and
`sbt.Package$`. If those classes are instead provided in different
jars, the jvm seems to be able to handle it.
Exporting the jars is not enough though, I had to rework the
ClassLoader created in the launch method to have a layout that was
recognized by xMainConfiguration. I reimplemented the AppConfiguration
in java so that it could bootstrap itself in a single jar classloader
(the only needed jar is the Scripted.
If we export the jars in the build, then the NoClassDefErrors for
`sbt.Package$` go away during scripted tests using RunSourceFromMain.
This might make running tests in subprojects slightly slower but I think
its a worthy tradeoff.
In order for the sbt launcher to be able to resolve a local version of
sbt, we must publish the main jar, the sources jar, the doc jar, the pom
and an ivy.xml file. The publish and publishLocal tasks are wired in
IvyXml.scala to create an ivy.xml file before running publish. This
wasn't done with publishLocalBin which made it not work when no ivy.xml
file was already present (which was the case after running clean).
frosforever
Ethan Atkins
Eugene Yokota
Anil Kumar Myla
João Ferreira
Dale Wijnand
Alex Zolotko
Arnout Engelen
Jannik Theiß