Merge pull request #429 from antmicro/roi-zynq

ROI Zybo

minitests/roi_harness/runme.sh

@@ -9,6 +9,16 @@ source ${XRAY_DIR}/utils/environment.sh
 export XRAY_PINCFG=${XRAY_PINCFG:-ARTY-A7-SWBUT}
 export BUILD_DIR=${BUILD_DIR:-build}
 
+DEVICE=`expr substr $XRAY_PART 4 1`
+if [ $DEVICE == "z" ] ; then
+    export XRAY_DEVICE=zynq7
+elif [ $DEVICE == "a" ] ; then
+    export XRAY_DEVICE=artix7
+else
+    echo "Unknown XRAY_DEVICE " $XRAY_DEVICE
+    exit 1
+fi
+
 # not part of the normal DB
 # to generate:
 cat >/dev/null <<EOF
@@ -21,22 +31,22 @@ make pushdb
 popd
 popd
 EOF
-stat ${XRAY_DIR}/database/artix7/${XRAY_PART}.yaml >/dev/null
+stat ${XRAY_DIR}/database/${XRAY_DEVICE}/${XRAY_PART}.yaml >/dev/null
 
 # 6x by 18y CLBs (108)
 if [ "$SMALL" = Y ] ; then
     echo "Design: small"
     export PITCH=1
-    export DIN_N=8
-    export DOUT_N=8
-    export XRAY_ROI=SLICE_X12Y100:SLICE_X17Y117
+    export DIN_N=${XRAY_DIN_N_SMALL:-8}
+    export DOUT_N=${XRAY_DOUT_N_SMALL:-8}
+    export XRAY_ROI=${XRAY_ROI_SMALL:-SLICE_X12Y100:SLICE_X17Y117}
 # All of CMT X0Y2
 else
     echo "Design: large"
     export PITCH=2
-    export DIN_N=17
-    export DOUT_N=17
-    export XRAY_ROI=SLICE_X0Y100:SLICE_X35Y149
+    export DIN_N=${XRAY_DIN_N_LARGE:-8}
+    export DOUT_N=${XRAY_DOUT_N_LARGE:-8}
+    export XRAY_ROI=${XRAY_ROI_LARGE:-SLICE_X0Y100:SLICE_X35Y149}
 fi
 
 mkdir -p $BUILD_DIR

minitests/roi_harness/runme.tcl

@@ -186,6 +186,33 @@ if {$part eq "xc7a50tfgg484-1"} {
     } else {
         error "Unsupported config $pincfg"
     }
+} elseif {$part eq "xc7z010clg400-1"} {
+    if {$pincfg eq "ZYBOZ7-SWBUT"} {
+        # https://github.com/Digilent/digilent-xdc/blob/master/Zybo-Z7-Master.xdc
+
+        # Slide switches and buttons
+        set ins "G15 P15 W13 T16"
+        set outs "M14 M15 G14 D18"
+
+        # 125 MHz CLK onboard
+        set pin "K17"
+        set net2pin(clk) $pin
+
+        # DIN
+        for {set i 0} {$i < $DIN_N} {incr i} {
+            set pin [lindex $ins $i]
+            set net2pin(din[$i]) $pin
+        }
+
+        # DOUT
+        for {set i 0} {$i < $DOUT_N} {incr i} {
+            set pin [lindex $outs $i]
+            set net2pin(dout[$i]) $pin
+        }
+
+    } else {
+        error "Unsupported config $pincfg"
+    }
 } else {
     error "Pins: unsupported part $part"
 }

minitests/roi_harness/zybo.sh

@@ -0,0 +1,19 @@
+# XC7010-1CLG400C
+export XRAY_PART=xc7z010clg400-1
+export XRAY_PINCFG=ZYBOZ7-SWBUT
+export XRAY_DIN_N_LARGE=4
+export XRAY_DOUT_N_LARGE=4
+
+# For generating DB
+export XRAY_PIN_00="G15"
+export XRAY_PIN_01="P15"
+export XRAY_PIN_02="W13"
+export XRAY_PIN_03="T16"
+export XRAY_PIN_04="K18"
+export XRAY_PIN_05="P16"
+export XRAY_PIN_06="K19"
+
+# ROI is in top right
+export XRAY_ROI_LARGE="SLICE_X22Y50:SLICE_X43Y99"
+
+source $XRAY_DIR/utils/environment.sh