minitests/roi_harness: Adding harness configs.

Signed-off-by: Tim 'mithro' Ansell <me@mith.ro>

minitests/roi_harness/arty-common.sh

@@ -1,8 +1,18 @@
 # XC7A35TICSG324-1L
 export XRAY_PART=xc7a35tcsg324-1
-export XRAY_PINCFG=ARTY-A7-UART
-export XRAY_DIN_N_LARGE=2
-export XRAY_DOUT_N_LARGE=2
+
+if [ -z "$XRAY_PINCFG" ]; then
+	echo "XRAY_PINCFG not set"
+	return 1
+fi
+if [ -z "$XRAY_DIN_N_LARGE" ]; then
+	echo "XRAY_DIN_N_LARGE not set"
+	return 1
+fi
+if [ -z "$XRAY_DOUT_N_LARGE" ]; then
+	echo "XRAY_DOUT_N_LARGE not set"
+	return 1
+fi
 
 # For generating DB
 export XRAY_PIN_00="G13"

minitests/roi_harness/arty-pmod.sh

@@ -0,0 +1,7 @@
+# XC7A35TICSG324-1L
+export XRAY_PINCFG=ARTY-A7-PMOD
+export XRAY_DIN_N_LARGE=8
+export XRAY_DOUT_N_LARGE=8
+export HARNESS_DIR=$XRAY_DIR/database/artix7/harness/arty-a7/pmod/
+
+source $XRAY_DIR/minitests/roi_harness/arty-common.sh

minitests/roi_harness/arty-swbut.sh

@@ -0,0 +1,7 @@
+# XC7A35TICSG324-1L
+export XRAY_PINCFG=ARTY-A7-SWBUT
+export XRAY_DIN_N_LARGE=8
+export XRAY_DOUT_N_LARGE=8
+export HARNESS_DIR=$XRAY_DIR/database/artix7/harness/arty-a7/swbut/
+
+source $XRAY_DIR/minitests/roi_harness/arty-common.sh

minitests/roi_harness/arty-uart.sh

@@ -0,0 +1,7 @@
+# XC7A35TICSG324-1L
+export XRAY_PINCFG=ARTY-A7-UART
+export XRAY_DIN_N_LARGE=2
+export XRAY_DOUT_N_LARGE=2
+export HARNESS_DIR=$XRAY_DIR/database/artix7/harness/arty-a7/uart/
+
+source $XRAY_DIR/minitests/roi_harness/arty-common.sh

minitests/roi_harness/basys3-common.sh

@@ -1,8 +1,17 @@
 # XC7A35T-1CPG236C
 export XRAY_PART=xc7a35tcpg236-1
-export XRAY_PINCFG=BASYS3-SWBUT
-export XRAY_DIN_N_LARGE=17
-export XRAY_DOUT_N_LARGE=17
+if [ -z "$XRAY_PINCFG" ]; then
+	echo "XRAY_PINCFG not set"
+	return 1
+fi
+if [ -z "$XRAY_DIN_N_LARGE" ]; then
+	echo "XRAY_DIN_N_LARGE not set"
+	return 1
+fi
+if [ -z "$XRAY_DOUT_N_LARGE" ]; then
+	echo "XRAY_DOUT_N_LARGE not set"
+	return 1
+fi
 
 # For generating DB
 export XRAY_PIN_00="V17"

minitests/roi_harness/basys3-swbut.sh

@@ -0,0 +1,7 @@
+# XC7A35T-1CPG236C
+export XRAY_PINCFG=BASYS3-SWBUT
+export XRAY_DIN_N_LARGE=17
+export XRAY_DOUT_N_LARGE=17
+export HARNESS_DIR=$XRAY_DIR/database/artix7/harness/basys3/swbut/
+
+source $XRAY_DIR/minitests/roi_harness/basys3-common.sh

minitests/roi_harness/zybo-common.sh

@@ -1,8 +1,18 @@
 # XC7010-1CLG400C
 export XRAY_PART=xc7z010clg400-1
-export XRAY_PINCFG=ZYBOZ7-SWBUT
-export XRAY_DIN_N_LARGE=4
-export XRAY_DOUT_N_LARGE=6
+
+if [ -z "$XRAY_PINCFG" ]; then
+	echo "XRAY_PINCFG not set"
+	return 1
+fi
+if [ -z "$XRAY_DIN_N_LARGE" ]; then
+	echo "XRAY_DIN_N_LARGE not set"
+	return 1
+fi
+if [ -z "$XRAY_DOUT_N_LARGE" ]; then
+	echo "XRAY_DOUT_N_LARGE not set"
+	return 1
+fi
 
 # For generating DB
 export XRAY_PIN_00="G15"

minitests/roi_harness/zybo-swbut.sh

@@ -0,0 +1,7 @@
+# XC7010-1CLG400C
+export XRAY_PINCFG=ZYBOZ7-SWBUT
+export XRAY_DIN_N_LARGE=4
+export XRAY_DOUT_N_LARGE=6
+export HARNESS_DIR=$XRAY_DIR/database/zynq7/harness/zybo/swbut/
+
+source $XRAY_DIR/minitests/roi_harness/zybo-common.sh