luke
/
openFPGALoader
mirror of https://github.com/trabucayre/openFPGALoader.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openFPGALoader/doc/cable.yml

336 lines
8.6 KiB
YAML
Raw Permalink Blame History

anlogicCable:
- Name: anlogic JTAG adapter
Description: JTAG adapter firmware for stm32
URL: https://github.com/AnlogicInfo/anlogic-usbjtag
arm-usb-ocd-h:
- Name: Olimex ARM-USB-OCD-H adapter
Description: High-speed 3-IN-1 fast USB ARM JTAG, USB-to-RS232 virtual port and power supply 5VDC device
URL: https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/
arm-usb-tiny-h:
- Name: Olimex ARM-USB-TINY-H adapter
Description: Low-cost high-speed ARM USB JTAG
URL: https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/
bus_blaster:
- Name: Dangerousprototypes Bus Blaster
Description: Jtag adapter based on ft2232
URL: http://dangerousprototypes.com/docs/Bus_Blaster
bus_blaster_b:
- Name: Dangerousprototypes Bus Blaster
Description: Jtag adapter based on ft2232 (interface B)
URL: http://dangerousprototypes.com/docs/Bus_Blaster
ch347_jtag:
- Name: ch347 JTAG adapter
Description: QinHeng Electronics USB To UART+JTAG (mode 3)
URL: https://www.wch-ic.com/products/CH347.html
ch552_jtag:
- Name: ch552 JTAG adapter
Description: Tang Nano USB-JTAG interface. FT2232C clone firmware for CH552 microcontroler
URL: https://github.com/diodep/ch55x_jtag
cmsisdap:
- Name: ARM CMSIS DAP protocol interface
Description: ARM CMSIS DAP protocol interface (hid only)
URL: https://os.mbed.com/docs/mbed-os/v6.11/debug-test/daplink.html
gatemate_pgm:
- Name: gatemate pgm
Description: Cologne Chip GateMate FPGA Programmer. FT232H-based JTAG/SPI programmer cable
URL: https://colognechip.com/programmable-logic/gatemate/
gatemate_evb_jtag:
- Name: gatemate evb JTAG
Description: Cologne Chip GateMate JTAG programmer
URL: https://colognechip.com/programmable-logic/gatemate/
gatemate_evb_spi:
- Name: gatemate evb spi
Description: Cologne Chip GateMate SPI programmer
URL: https://colognechip.com/programmable-logic/gatemate/
gwu2x:
- Name: gwu2x
Description: Gowin GWUX2X
URL: https://www.gowinsemi.com/en/product/detail/55/
dfu:
- Name: DFU interface
Description: DFU (Device Firmware Upgrade) USB device compatible with DFU protocol
URL: http://www.usb.org/developers/docs/devclass_docs/DFU_1.1.pdf
digilent:
- Name: digilent cable
Description: FT2232 JTAG / UART cable
diglent_b:
- Name: digilent cable
Description: digilent FT2232 JTAG / UART cable (interface B)
digilent_hs2:
- Name: digilent hs2 cable
Description: FT232H JTAG programmer cable from digilent
URL: https://store.digilentinc.com/jtag-hs2-programming-cable/
digilent_hs3:
- Name: digilent hs3
Description: JTAG programmer cable from digilent
URL: https://digilent.com/shop/jtag-hs3-programming-cable/
dirtyJtag:
- Name: dirty Jtag
Description: JTAG probe firmware for STM32F1
URL: https://github.com/jeanthom/DirtyJTAG
Note: Best to use release (1.4 or newer) or limit the --freq to 600000 with older releases.
New version `dirtyjtag2 <https://github.com/jeanthom/DirtyJTAG/tree/dirtyjtag2>`__ is also supported
efinix_spi_ft4232:
- Name: efinix SPI (ft4232)
Description: efinix SPI interface (FTDI4232 interface A)
efinix_jtag_ft4232:
- Name: efinix JTAG (ft4232)
Description: efinix JTAG interface (FTDI4232 interface B)
efinix_spi_ft2232:
- Name: efinix SPI (ft2232)
Description: efinix SPI interface (FTDI2232 interface A)
efinix_jtag_ft2232:
- Name: efinix JTAG (ft2232)
Description: efinix JTAG interface (FTDI2232 interface B)
ft2232:
- Name: FT2232 C/D/H
Description: generic programmer cable based on Ftdi FT2232 (interface A)
- Name: Tang Nano (1k, 4k, 8k) USB-JTAG interface
Description: USB-JTAG/UART debugger based on BL702 microcontroler.
URL: https://github.com/sipeed/RV-Debugger-BL702
- Name: Sipeed RV-Debugger-BL702
Description: RV-Debugger-BL702 is an opensource project that implement a JTAG+UART debugger with BL702C-A0.
URL: https://github.com/sipeed/RV-Debugger-BL702
- Name: honeycomb USB-JTAG interface.
Description: FT2232C clone based on STM32F042 microcontroler
URL: https://github.com/Disasm/f042-ftdi
ft2232_b:
- Name: FT2232 C/D/H
Description: generic programmer cable based on Ftdi FT2232 (interface B)
ft231X:
- Name: FT231X
Description: generic USB<->UART converters in bitbang mode (with some limitations and workaround)
URL: https://www.ftdichip.com/old2020/Products/ICs/FT231X.html
ft232:
- Name: FT232H
Description: generic programmer cable based on Ftdi FT232Hx. One interface, MPSSE capable
URL: https://ftdichip.com/products/ft232hl/
ft232RL:
- Name: FT232RL
Description: generic USB<->UART converters in bitbang mode (with some limitations and workaround)
URL: https://ftdichip.com/products/ft232rl/
ft4232:
- Name: FT4232
Description: quad interface programmer cable. MPSSE capable.
URL: https://ftdichip.com/products/ft4232h-56q/
ft4232hp:
- Name: FT4232HP (interface A)
Description: quad interface programmer cable. MPSSE capable. High Speed USB Bridge with Type-C/PD3.0 Controller
URL: https://ftdichip.com/wp-content/uploads/2023/02/DS_FT4233HP.pdf
ft4232hp_b:
- Name: FT4232HP (interface B)
Description: quad interface programmer cable. MPSSE capable. High Speed USB Bridge with Type-C/PD3.0 Controller
URL: https://ftdichip.com/wp-content/uploads/2023/02/DS_FT4233HP.pdf
ecpix5-debug:
- Name: ecpix5-debug
Description: LambdaConcept ECPIX5 (45k/85k) UART/JTAG interface
URL: https://shop.lambdaconcept.com/home/46-ecpix-5.html
jlink:
- Name: jlink
Description: SEGGER J-Link Debug Probes
URL: https://www.segger.com/products/debug-probes/j-link
- Name: jlink_base
Description: SEGGER J-Link BASE Debug Probes
- Name: jtrace_pro
Description: SEGGER J-Trace PRO Debug Probes
jtag-smt2-nc:
- Name: jtag-smt2-nc
Description: JTAG-SMT2-NC Surface-mount Programming Module
URL: https://digilent.com/shop/jtag-smt2-nc-surface-mount-programming-module
lpc-link2:
- Name: lpc-link2
Description: LPC-Link2 (OM13054) cmsisDAP firmware
URL: https://www.nxp.com/design/microcontrollers-developer-resources/lpc-link2:OM13054
numato:
- Name: numato
Description: Embedded cable for Numato Systems Mimas-A7 board
orbtrace:
- Name: orbtrace interface
Description: Open source FPGA-based debug and trace interface
URL: https://github.com/orbcode/orbtrace
papilio:
- Name: papilio
Description: Papilio FPGA Platform
URL: https://papilio.cc/
steppenprobe:
- Name: steppenprobe
Description: Open Source Hardware JTAG/SWD/UART/SWO interface board based on FTDI FT2232H
URL: https://github.com/diegoherranz/steppenprobe
remote-bitgang:
- Name: OpenOCD remote bitbang
Description: The remote_bitbang JTAG driver is used to drive JTAG from a remote (TCP) process
URL: https://github.com/openocd-org/openocd/blob/master/doc/manual/jtag/drivers/remote_bitbang.txt
tigard:
- Name: tigard
Description: SWD/JTAG/UART/SPI programmer based on Ftdi FT2232HQ
URL: https://www.crowdsupply.com/securinghw/tigard
usb-blaster:
- Name: intel USB Blaster I interface
Description: JTAG programmer cable from intel/altera (FT245 + EPM7064)
usb-blasterII:
- Name: intel USB Blaster II interface
Description: JTAG programmer cable from intel/altera (EZ-USB FX2 + EPM570)
URL: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf
usb-blasterIII:
- Name: intel USB Blaster III interface
Description: JTAG programmer cable from intel/altera (FTDI2232 with custom VID/PID)
URL: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf
xvc-client:
- Name: Xilinx Virtual Cable
Description: Xilinx Virtual Cable (XVC) is a TCP/IP-based protocol that acts like a JTAG cable.
URL: https://github.com/Xilinx/XilinxVirtualCable
xvc-server:
- Name: Xilinx Virtual Cable (server side)
Description: Xilinx Virtual Cable (XVC) is a TCP/IP-based protocol that acts like a JTAG cable.
URL: https://github.com/Xilinx/XilinxVirtualCable
libgpiod:
- Name: Bitbang GPIO
Description: Bitbang GPIO pins on Linux host.
URL: https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/
jetson-nano-gpio:
- Name: Bitbang GPIO
Description: Bitbang GPIO pins on Jetson Nano Linux host. Use /dev/mem to have a faster clock.
URL: https://github.com/jwatte/jetson-gpio-example
ch347:
- Name: CH347
Description: CH347 is a USB HS bus converter with UART, I2C, SPI and JTAG interfaces
URL: https://github.com/wuxx/USB-HS-Bridge
Reference in New Issue View Git Blame Copy Permalink