3d9717f7c3
add the skip_load_bridge and skip_reset arguments also for Xilinx devices
2023-03-03 11:18:08 +01:00
9c1876818f
README,main: add remote bitbang for ip and port
2023-03-02 13:55:40 +01:00
657d98f3c3
args: better --offset description ( #319 )
2023-02-27 21:15:34 +01:00
7f1f9445d4
cable: bus_addr, device_addr: int -> uint8_t
2023-02-25 17:10:01 +01:00
0536ab4754
Add target-flash and secondary-bitstream CLI options for VCU118
2023-02-06 11:23:10 +01:00
84aa0d14b9
main: xvc_server: catch exception
2023-01-02 18:02:43 +01:00
fb8c1a5f97
altera,intel: adding an option to bypass spiOverJtag automatic bitstream selection by providing the bitstream file path
2022-12-10 22:05:37 +01:00
d5190a3bd4
src/main.cpp: lint/cppcheck
2022-11-12 22:58:17 +01:00
a0a68282cd
src/main: simplify svf type search
2022-11-12 22:38:10 +01:00
4a5bd0279b
Removed the svf programming code from devices and added device independent svf programming in main.cpp
...
Fixed a type error in svf_jtag.cpp
2022-11-12 13:14:13 -08:00
de5aff7a96
spiFlash: Add --bulk-erase command line option
...
Adds a --bulk-erase command line option for bulk erasure of SPI flash.
2022-11-06 18:56:07 +10:30
228f71d9b5
src/libusb_ll: libusb wrapper (currently limited to scan device), src/main: add scan-usb option
2022-10-15 22:28:06 +02:00
2311f2c6ec
src/main: add busdev-num option to select a probe by his bus number / device address
2022-10-15 17:41:30 +02:00
48126cf84c
src/xx: cable implementation: rework to use cable_t directly
2022-10-15 16:17:32 +02:00
2d66236533
xvc_client: allows to select port
2022-10-06 07:07:17 +02:00
8f59294f45
src/main: add specific -D to enable/disable --device arg
2022-09-17 17:33:25 +02:00
27309d4931
cmsisDAP: allows to select interface number
2022-08-29 21:00:32 +02:00
61e959f93d
main,board,ftdiJtagBitbang: use pin ID instead of shift
2022-08-23 18:37:43 +02:00
51628c38f5
typo
2022-07-26 20:29:11 +02:00
e77b8fb022
Merge pull request #243 from balika011/master
...
Gowin GW1NSR-4C MCU support
2022-07-25 19:09:01 +02:00
c3d13e8b75
remove unneeded code
2022-07-24 17:30:59 +02:00
e847c3a7b0
Add connecting MCU to JTAG support for GW1NSR-4C
2022-07-20 23:32:21 +02:00
0581803def
Add MCU Firmware flashing support for GW1NSR-4C
2022-07-20 23:32:16 +02:00
12955b8711
Initial commit of libgpiod JTAG driver
...
Not tested yet.
2022-07-18 18:09:34 +02:00
975c40a00a
enable xvc only for Linux OS
2022-07-06 21:14:25 +02:00
a90a7b6fa5
main: enable xvc_server
2022-07-06 21:00:24 +02:00
e21a251af3
DFU: fix detect -> bypass bitstream
2022-06-18 18:39:58 +02:00
dec1a0920f
add means to set cable index from command line
2022-06-01 07:17:38 -07:00
610a495898
main: skip-reset fix typo
2022-05-28 18:06:51 +02:00
26ea58c305
main: always check if board is not null before access
2022-05-28 17:20:53 +02:00
051e2ecbfb
add option to bypass reset in SPI write mode. Adapt altera accordingly
2022-05-24 07:29:35 +02:00
847a5040cf
add skip_load_bridge cmd-line parameter
2022-05-23 11:51:16 +02:00
80eeaef6ab
ip CLI arg for XVC
2022-04-11 06:53:22 +02:00
964c7d6659
ftdi MPSSE / jtag: add option to use neg edge for TDO's sampling
2022-03-11 07:45:48 +01:00
63c9ec01b7
Fixed right alignment problem.
2022-02-09 17:55:16 +01:00
12c5e6ba19
Nicer layout for the boards/fpga/cables table
2022-02-08 19:31:37 +01:00
eb462d2bec
main: bitstream default target depends on mode spi/jtag
2022-01-18 08:09:54 +01:00
17a874fc04
main: fix SPI access
2021-12-24 11:19:30 +01:00
4cab198915
colognechip integration: create CologneChip SPI object in dynamic fashion as well
2021-12-23 08:54:48 +01:00
db92ea068c
main: add protection for all devices. Add CLI args
2021-12-22 19:12:33 +01:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
5f78204f22
Merge pull request #130 from abacomartin/master
...
adding support for MachXO3D
2021-11-20 15:35:01 +01:00
8df01663ff
main: raise error when board name is provided but not found
2021-11-11 17:20:51 +01:00
b6979f54f7
adding support for MachXO3D
2021-11-09 08:54:09 +00:00
649554f3fd
efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface
2021-10-23 08:44:23 +02:00
b1b1e5a4a8
main: don't limit vid/pid to dfu
2021-10-13 06:51:22 +02:00
6858cabc7d
main: introduce vid/pid args
2021-10-03 18:33:55 +02:00
ea613fa97a
dfu/main: add args to select altsetting and add filter to select corresponding interface
2021-10-03 12:39:06 +02:00
abef1f4968
add verbose-level args: -1 quiet, 0 normal mode, 1 verbose, 2 debug lowlevel
2021-10-03 08:22:35 +02:00
85b53b5918
add gowin external spi in bscan and --external-flash option
2021-09-15 20:18:49 +02:00
hycrypt
Gwenhael Goavec-Merou
Ricardo Barbedo
Patrick Dussud
Rod Whitby
balika011
Niklas Ekström
Rengifo, Rodrigo
Simon Buhrow
Stephan Ruloff
Patrick Urban
Martin Beynon