c3fcbaee07
removing test_sfl.svf
2022-09-30 13:59:39 +02:00
08af4a0247
prepare release v0.9.1
2022-09-19 21:02:24 +02:00
8f59294f45
src/main: add specific -D to enable/disable --device arg
2022-09-17 17:33:25 +02:00
be46b2cfd6
prepare release 0.9.0
2022-07-26 21:14:30 +02:00
62e6e5a0bf
Improve CMake handling of libgpiod
2022-07-22 10:26:46 +02:00
12955b8711
Initial commit of libgpiod JTAG driver
...
Not tested yet.
2022-07-18 18:09:34 +02:00
057ce931f8
cmake xvc_server: try again to fix built failure with ubuntu 19/20
2022-07-06 22:50:11 +02:00
9de5926ff8
cmake xvc_server: try to fix built failure with ubuntu 19/20, reindent
2022-07-06 22:26:00 +02:00
975c40a00a
enable xvc only for Linux OS
2022-07-06 21:14:25 +02:00
34ff4f4020
xvc_server: first draft
2022-07-06 20:58:19 +02:00
7bfce0fb2b
xvc_client: Xilinx Virtual Cable client PoC
2022-04-10 16:02:39 +02:00
c2b85f2a47
CMakeLists: fix general code styling, use dynamic linking on macOS
...
* Making the indentation even across the whole file
* Use dynamic linking on macOS and fix its pkg-config usage in the
process. This should render openFPGALoader agnostic to the
location of Homebrew's prefix, and solve compatibility issues with
MacPorts
2022-03-22 21:36:38 +01:00
bbd755832d
prepare release 0.8.0
2022-03-19 10:15:38 +01:00
18100ec0f3
cable: new SEGGER J-Link support (PoC)
2022-03-12 18:46:23 +01:00
9226077998
Darwin cmake config is missing Security framework
2022-02-24 10:41:04 +00:00
1e98873629
prepare release 0.7.0
2021-12-27 15:46:26 +01:00
de2917428e
spiInterface: add common method to (un)protect, write and dump SPI flash content
2021-12-22 19:01:58 +01:00
4e70bdf0c5
CMakeLists.txt: install bit.gz too
2021-12-19 17:34:51 +01:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
f404199e25
prepare 0.6.1
2021-12-03 07:22:26 +01:00
9005b2880b
CMakeList/configBitstreamParser: add optional zlib-ng support. No zlibxx is required
2021-12-02 07:20:58 +01:00
efeb0d83c4
Fix version number in CMakeLists.txt
...
Current version number is stuck at 0.5.0...
2021-12-02 00:32:13 +01:00
7a19f94f19
add zlib support (currently limited to altera spiOverJtag)
2021-11-25 08:11:50 +01:00
b6979f54f7
adding support for MachXO3D
2021-11-09 08:54:09 +00:00
f843dc2eb2
ch552_jtag: driver for ch552_jtag firmware (ft2232c clone)
2021-11-06 10:33:25 +01:00
9cfb070e2f
cmsisDAP: try libhidapi-hidraw, or libhidapi-libusb for backward compatibility
2021-10-14 06:46:59 +02:00
22c095547e
spi: introduce list of known spi flash devices (required for protection)
2021-10-10 18:25:09 +02:00
4c2a091ab1
xilinx: introduce coolrunner-II support
2021-10-06 08:46:00 +02:00
823073741a
Merge pull request #122 from UweBonnes/udev
...
CMakeLists.txt: Default to USEUDEV=OFF in windows builds.
2021-10-03 17:49:24 +02:00
6d360ac640
CMakeLists.txt: Default to USEUDEV=OFF in windows builds.
2021-10-03 17:40:27 +02:00
1233459528
xilinxMapParser: fuse mapping for xc2c jed
2021-10-03 16:25:41 +02:00
3ea05cc1c6
prepare v0.5.0
2021-08-02 08:28:27 +02:00
592cbd87b7
spiOverJtag: add real bridge (virtual jtag) for cyc1000 and build system based on edalize
2021-07-08 20:59:28 +02:00
f937cb9ab5
Adds support for the xc6slx100fgg484.
...
Tested on a Pano Logic G2.
2021-07-03 05:01:56 -04:00
1dbbd34420
prepare release v0.4.0
2021-06-26 15:24:22 +02:00
371a411e8a
prepare release v0.3.0
2021-06-20 16:40:41 +02:00
827767b99f
add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode
2021-06-20 10:26:05 +02:00
53c5d35da6
add cmsis dap (hid) support
2021-06-19 17:30:23 +02:00
e1e5efd652
CMakeLists.txt: add fx2_ll
2021-05-13 16:04:34 +02:00
c09bc0662b
ihexParser: new parser for (i)hex files
2021-05-13 12:14:52 +02:00
7039465353
rework xilinx fpga spiOverJtag to respect model/package
2021-04-19 21:17:08 +02:00
227ce13dca
prepare release v0.2.6
2021-04-07 06:24:41 +02:00
6d1c51d0a4
fix purge buffer fix libftdi >= 1.5
...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
2021-02-25 13:37:33 +01:00
4a555bb102
dfuFileParser: parser for bitstream with DFU suffix
2021-02-15 07:33:58 +01:00
6fefebd02c
prepare release v0.2.1
2020-12-17 13:58:30 +01:00
922d3b0b56
xilinx: add xca50t support
2020-12-08 07:32:30 +01:00
5d09bbde43
cmake: add missing spartan7 100 & 200 bitstream
2020-11-18 08:16:54 +01:00
14c5b8e681
add support for ice40 FPGA and iCEBreaker, icestick, iCE40-HX8K, iCE40-HX1K-EVN boards
2020-10-31 15:02:54 +01:00
70fb5c8439
add efinix support
2020-10-31 10:39:06 +01:00
800ad1ce2c
rawParser: simple class to read raw binary content with an optional reverse order
2020-09-05 07:49:57 +02:00
Gwenhael Goavec-Merou
Niklas Ekström
Jean THOMAS
Jonathan Kimmitt
Patrick Urban
Jean THOMAS
Martin Beynon
Uwe Bonnes
Billy Stevens