luke
/
openFPGALoader
mirror of https://github.com/trabucayre/openFPGALoader.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
1,106 Commits 21 Branches 23 Tags 16 MiB
Commit Graph

657 Commits

Author SHA1 Message Date
Gwenhael Goavec-Merou 077f335dbd src/libusb_ll: adding a libusb_open() return code check: when fails skip rest of the loop 2022-10-19 07:40:31 +02:00
Petr Nechaev 1bbe448f3a Limit automatic read burst length to 64K 
Reading of very large binaries (e.g. 32 MB) can cause stack overflow.
Put a reasonable limit on read burst length.
 2022-10-16 15:44:33 +03:00
Petr Nechaev 7185bbd127 Support for microchip SST26VF064B flash 2022-10-16 15:32:16 +03:00
Gwenhael Goavec-Merou 228f71d9b5 src/libusb_ll: libusb wrapper (currently limited to scan device), src/main: add scan-usb option 2022-10-15 22:28:06 +02:00
Gwenhael Goavec-Merou 2311f2c6ec src/main: add busdev-num option to select a probe by his bus number / device address 2022-10-15 17:41:30 +02:00
Gwenhael Goavec-Merou 68e519e4af src/ftdipp_mpsse: _bus/_addr: change type to uint8_t, default value to 0 and use cable_t bus_addr/device_addr$ 2022-10-15 17:18:38 +02:00
Gwenhael Goavec-Merou 9e5fcdbe0d src/cable: rename bus/device to bus_addr/device_addr 2022-10-15 16:19:24 +02:00
Gwenhael Goavec-Merou 48126cf84c src/xx: cable implementation: rework to use cable_t directly 2022-10-15 16:17:32 +02:00
Gwenhael Goavec-Merou 3e20dc7082 src/cable: rework cable list. move vid/pid from mpsse_bit_config to cable_t 2022-10-15 16:15:23 +02:00
Gwenhael Goavec-Merou 2d66236533 xvc_client: allows to select port 2022-10-06 07:07:17 +02:00
Bastian Löher b3e25bc650 Add support for xc7s_csga225 and the Digilent CMOD S7 board. 2022-09-30 22:27:20 +02:00
Hirosh Dabui 3c9792645e add support for CmodA7-35T digilent fpga board 2022-09-30 21:17:45 +02:00
Gwenhael Goavec-Merou c3fcbaee07 removing test_sfl.svf 2022-09-30 13:59:39 +02:00
Gwenhael Goavec-Merou 47f59d68ef libgpiodJtagBitbang: fix warning 2022-09-17 17:33:58 +02:00
Gwenhael Goavec-Merou 8f59294f45 src/main: add specific -D to enable/disable --device arg 2022-09-17 17:33:25 +02:00
Gwenhael Goavec-Merou fe259fb78d gowin: add MSPI support when GW2A 2022-09-06 21:25:32 +02:00
Gwenhael Goavec-Merou d50b8102aa ftdiJtagBitbang: fix int vs uint32_t 2022-09-04 14:16:56 +02:00
Gwenhael Goavec-Merou 09b65ef4cc gowin: better error message when mismatch between fs idcode and target's idcode 2022-09-04 14:16:02 +02:00
Gwenhael Goavec-Merou 93aa9f4dd3 cable: add lpc-link2 support 2022-08-29 21:03:30 +02:00
Gwenhael Goavec-Merou 27309d4931 cmsisDAP: allows to select interface number 2022-08-29 21:00:32 +02:00
Gwenhael Goavec-Merou 61e959f93d main,board,ftdiJtagBitbang: use pin ID instead of shift 2022-08-23 18:37:43 +02:00
Maciej Nowak 5f7d4d2078 Add Xilinx Kintex UltraScale KCU035 IDCode 2022-08-18 15:25:09 +02:00
Diego Herranz f115608cb1 Add Steppenprobe cable 
https://github.com/diegoherranz/steppenprobe

Config taken from OpenOCD repo:
https://sourceforge.net/p/openocd/code/ci/master/tree/tcl/interface/ftdi/steppenprobe.cfg
 2022-08-09 18:31:16 +02:00
Gwenhael Goavec-Merou 6a00466137 xilinx: flow_program/xc95: verify write: replace hardcoded number of sections by nb_section 2022-08-04 08:15:29 +02:00
Gwenhael Goavec-Merou c6d79ec2e8 xilinx: flow_program/xc95: increase delay and use getClkFreq (issue #104) 2022-08-04 08:08:01 +02:00
Gwenhael Goavec-Merou 51628c38f5 typo 2022-07-26 20:29:11 +02:00
Gwenhael Goavec-Merou b4d343ce05 board: adding sipeed Tang Primer 20k 2022-07-26 20:25:43 +02:00
Gwenhael Goavec-Merou e77b8fb022
Merge pull request #243 from balika011/master 
Gowin GW1NSR-4C MCU support
 2022-07-25 19:09:01 +02:00
Gwenhael Goavec-Merou 61aa0d4785 libgpiodJtagBitbang: update copyright + lint 2022-07-25 19:08:23 +02:00
balika011 421eefc605 MCU firmware isn't added to the checksum 2022-07-24 17:51:24 +02:00
balika011 e44af80776 use RawParser for gowin mcu flashing 2022-07-24 17:31:36 +02:00
balika011 c3d13e8b75 remove unneeded code 2022-07-24 17:30:59 +02:00
Niklas Ekström bb6d286736 Remove unnecessary null check 2022-07-22 10:14:53 +02:00
Niklas Ekström f69ce8a465 Only show libgpiod cable in list if enabled 2022-07-22 10:01:23 +02:00
Niklas Ekström 4ed3ff835c Clarify code by using different API function 
Use gpiod_chip_open instead of gpiod_chip_open_by_name, and thus avoid
having to remove "/dev/" prefix.
 2022-07-22 09:52:12 +02:00
balika011 e847c3a7b0 Add connecting MCU to JTAG support for GW1NSR-4C 2022-07-20 23:32:21 +02:00
balika011 0581803def Add MCU Firmware flashing support for GW1NSR-4C 2022-07-20 23:32:16 +02:00
Niklas Ekström 8d920d7ed0 Bugfix to allow NULL tx pointer 
Also set the _clkHZ variable which is needed for timing operations
such as erase.
 2022-07-18 18:09:34 +02:00
Niklas Ekström 12955b8711 Initial commit of libgpiod JTAG driver 
Not tested yet.
 2022-07-18 18:09:34 +02:00
Gwenhael Goavec-Merou 3e35944a4f xvc_server: fix message size 2022-07-06 21:36:57 +02:00
Gwenhael Goavec-Merou 975c40a00a enable xvc only for Linux OS 2022-07-06 21:14:25 +02:00
Gwenhael Goavec-Merou a90a7b6fa5 main: enable xvc_server 2022-07-06 21:00:24 +02:00
Gwenhael Goavec-Merou 34ff4f4020 xvc_server: first draft 2022-07-06 20:58:19 +02:00
Gwenhael Goavec-Merou e91ae5e65b xvc_client: fix frequency convertion 2022-07-06 20:57:47 +02:00
Gwenhael Goavec-Merou de42f8b239 ftdiJtagMPSSE: add writeTMSTDI method with full tms & tdi buffer. Always return TDO buffer 2022-07-03 21:44:03 +02:00
Gwenhael Goavec-Merou f364ea2c8f
Merge pull request #239 from BBBSnowball/better-message-if-cmsisdap-disabled 
cmsisDAP: better error message if support is not enabled
 2022-07-02 22:30:18 +02:00
Benjamin Koch 8c9a86699b cmsisDAP: better error message if support is not enabled 2022-07-02 17:24:02 +02:00
Benjamin Koch 80cf8edc31 cmsisDAP: fix crash in case hid device cannot be opened 2022-07-02 17:03:31 +02:00
Gwenhael Goavec-Merou 2f30668dbc ORBTrace Mini support (DFU mode) 2022-06-18 22:55:58 +02:00
Gwenhael Goavec-Merou 702ca39300 stop using get_state and promote the use of get_status 2022-06-18 22:50:55 +02:00