cd614b2e0f
Add the non-nqs PSP103 OSDI model to spinit
2025-12-28 23:30:35 +01:00
66dfc915e9
Add a function m3avg(vector) for filtering of trap ringing.
...
Moving average with D(n) = (C(n-1)/2 + C(n) + C(n+1)/2)/2
2025-12-28 23:19:58 +01:00
2b61f66209
Add a note on --enable-predictor and -march=native
2025-12-28 23:17:21 +01:00
a12bedb835
Make pred available always
2025-12-28 12:47:55 +01:00
556fd7ccd2
Add a note on --enable-predictor
2025-12-28 11:09:15 +01:00
c85f9fe997
Measure transient analysis time.
2025-12-28 11:03:08 +01:00
99bddad736
Enable optional voltage based truncation error correction.
...
This is selectable as 'option newtrunc' (--enable-Predictor is required)
Remove --enable-NEWTRUNC
Add three option parameters (default):
lteTrtol (500), lteReltol (1e-3), lteAbstol (1e-6)
Add new error function for TRAP, similar to GEAR
(tentative, to be improved), in ckttrun.c
Enable PREDICTOR as default with Visual Studio.
2025-12-27 22:46:27 +01:00
ebde8f43f1
Fix tiny bug.
2025-12-27 22:46:16 +01:00
d0501da241
Add function to verify that subckt port directions are compatible with auto bridging. Use set ps_ports_and_pins=1 to see the port directions.
2025-12-27 22:40:59 +01:00
a984a43b61
Fixes a memory corruption bug resulting from improper parsing
...
and accessing of array parameters in OSDI models
2025-12-20 11:31:24 +01:00
d610fa070a
Diode sensitivity analysis: Exclude few parameters and add level 3 geometry parameter.
2025-12-19 18:20:25 +01:00
ee6cd951cd
Fix the overlap in state vector for sensitivity states of diode and bjt model.
2025-12-19 17:03:08 +01:00
e1afc5cf09
KLU bindings for separate sw diode only if sw resistor is given
2025-12-19 14:07:47 +01:00
9fef242c50
Update comment to cktnumstates
2025-12-19 12:56:11 +01:00
29f27c1e4c
Update test description
2025-12-19 12:55:35 +01:00
4f9fb4c641
Diode model level=2 (Fowler-Nordheim) is not supported.
2025-12-11 10:43:07 +01:00
83e2b284f3
Add missing function prototypes
2025-12-03 23:03:42 +01:00
c1acc44a55
This fixed #822 diode discontinuity problem
...
Base recombination current appears in reverse and breakdown region too.
2025-12-02 20:35:43 +01:00
284d4308db
Add optional switch for separate bottom and sidewall diode model - configuration is dependent from model parameter RSW
...
Further sidewall knee current parameter IKP is implemented.
2025-11-27 16:21:31 +01:00
f8d341b05a
Re-formatting
2025-11-24 14:02:42 +01:00
9cfbb2bc8c
Add a comment
2025-11-23 10:37:47 +01:00
7f75f09ecd
general vdmos update
2025-11-20 15:09:04 +01:00
f7c32d5edd
Update: add frequency measurement and temperature dependency.
2025-11-18 16:01:19 +01:00
d93a11b8ea
Remove unused functions from the IFfrontEnd struct.
2025-11-17 23:56:50 +01:00
f1baefd932
Remove a double entry
2025-11-17 18:41:12 +01:00
c0bc939ed0
Enable guessing the vector type or SP analysis in batch mode.
2025-11-17 14:12:42 +01:00
051043a70a
Remove variable and flag 'use_numparams'.
...
Not using numparam has not been a supported option for the last 20 years.
2025-11-16 12:12:48 +01:00
b3eb6b12fe
Try to equalise the last two time steps before a breakpoint,
...
if the second step would be smaller than CKTdelta otherwise.
2025-11-15 19:50:04 +01:00
95b8cee898
Using cbrt() instead of exp(log...) might be more efficient
2025-11-15 19:49:07 +01:00
55e4f5377f
VDMOS: apply m scaling fix for acld as well
2025-11-15 09:50:51 +01:00
8d26e8b2cb
VDMOS scaling fixed.
2025-11-14 09:34:57 +01:00
807ff2b90c
Minor change in VDMOS that helps VADistiller.
2025-11-14 09:34:57 +01:00
c0d92ebd96
Update to commit
...
172fb6d66
2025-11-12 11:23:24 +01:00
0a7ad07cc0
Add a variable 'debug-out-short' to enable a shortened debug-out.txt,
...
useful when large circuits are monitored, which otherwise may result
in GigaBit size of data.
2025-11-12 11:21:13 +01:00
8c3d4d7990
vdmos convtest needs type for vd - load hack not needed anymore
2025-11-10 15:17:56 +01:00
420838e4e8
vdmos: in case temp and dtemp is given - use dtemp and omit temp
2025-11-09 08:21:45 +01:00
9802c7d0c6
correct gate and source resistor temperature update
2025-11-08 21:15:32 +01:00
3281d0798a
correct rthca connection
2025-11-08 09:13:16 +01:00
600ff13796
Revert "Remove instance parameter temp. To specify offset to ambient temperature use dtemp instead."
...
This reverts commit 3340df46ca
2025-10-26 08:34:34 +01:00
ddfb52d134
Revert "correct and simplify temp derivatives"
...
This reverts commit a6590d354f
2025-10-26 08:33:58 +01:00
6fc75e636c
Fix a bug.
2025-10-25 15:40:37 +02:00
f8036c5363
fix bug no 819, which has been introduced by
...
d5ef8a366
2025-10-25 15:37:08 +02:00
a6590d354f
correct and simplify temp derivatives
2025-10-24 09:37:34 +02:00
3340df46ca
Remove instance parameter temp. To specify offset to ambient temperature use dtemp instead.
...
Remove temp update double application for beta and series resistances and fix derivatives for selfheating model.
2025-10-22 18:21:49 +02:00
4560fce4af
make nthreads local
2025-10-21 22:18:12 +02:00
b8325efe24
Improve comments
2025-10-21 22:17:35 +02:00
d5ef8a3660
Remove all entries connected to IPC, an outdated (>30 years)
...
method to link ngspice to a now defunct controller (ATESSE).
2025-10-21 11:18:22 +02:00
8e0622434f
Improve comments, add note to user.
2025-10-20 16:07:19 +02:00
b260b4bc27
Entries to old CLUSTER code removed.
2025-10-19 22:27:21 +02:00
cbd3772519
Add variable deltacheck to measure the CKTdelta[0]
...
(most recent accepted delta time) versus simulation time.
Activated if 'set ngdebug' is given (not forget to set
'.save deltacheck' if other .save commands are given).
2025-10-18 15:40:02 +02:00
Holger Vogt
Brian Taylor
lorenzo
dwarning
Árpád Bűrmen
dwarning