b73939e379
Patch allowing call to S parameter simulation also from .control section by using command 'sp'
2022-04-25 21:30:52 +02:00
99f2414caf
Prevent a segfault when the parameter to command 'repeat' is given,
...
but cannot be evaluetd to a number.
2022-04-25 21:30:27 +02:00
5fb19c41bc
Fix internet address
2022-04-25 21:30:07 +02:00
a3d55cdddb
Replace (all) by alli
2022-04-25 21:29:55 +02:00
82822eb260
replace (all) by alli
2022-04-25 21:29:47 +02:00
56a3771d9a
.probe: replace (all) by alli (we only measure all currents)
2022-04-25 21:29:39 +02:00
4cc6222230
Make function search_plain_identifier non-static
...
Declare info on the compatibility mode as a 'Note'.
2022-04-25 21:29:25 +02:00
696736b2b3
adding expressions in {} as pwl parameters
...
not complete, still requires caring about the FIXME above.
2022-04-25 21:28:52 +02:00
242a1d796a
Remove the "type" declaration from a .model line
2022-04-25 21:28:32 +02:00
a1eb0cc63d
If XSPICE is not selected, still send CKTspDump(ckt, freq, spPlot),
...
but without ipc (spPlot instead of undefined acPlot)
2022-04-25 21:28:16 +02:00
36868e0b0f
Use #ifdef XSPICE to exclude findvec_alle() if
...
XSPICE is not selected.
2022-04-25 21:28:03 +02:00
ed2d48756c
exclude 'type=xxx' from model declaration
2022-04-25 21:27:53 +02:00
45d5d9a764
remove duplicate pointer allocation
2022-04-25 21:27:39 +02:00
246f9f5e9e
d_pwm: Add a hybrid oscillator (analg control in, digital out) with PWM
...
(pulse width modulation) capability, oscillation frequency is a parameter.
The model has been derived from the d_osc example.
2022-04-25 21:27:26 +02:00
18a01244af
save only relevant digital data (command 'esave'
2022-04-25 21:27:11 +02:00
7f326b4fe1
remove options not needed
...
local behavior setting
2022-04-25 21:26:57 +02:00
48e0164cc4
Replace $ in instance and.model lines by ;
...
$ is not a valid end-of-line comment delimiter when PS
compatibility mode is chosen.
2022-04-25 21:26:42 +02:00
c8beb1e601
Replace $ by ; as a universally valid end-of-line-comment delimiter
2022-04-25 21:26:35 +02:00
63a4e44c2c
Add more parameters to the example
2022-04-25 21:26:23 +02:00
ffc74197b0
old mode 100644
...
new mode 100755
2022-04-25 21:26:02 +02:00
f21255ef1b
Fix regression bug #579
...
Accept numbers to ac statement in voltage (current) sources
also given as parameters.
2022-02-22 20:39:20 +01:00
20d5919e59
Terminal setting to X11 fails in macOS, and is not required
...
on Linux.
Setting terminal here is redundant, so remove this setting.
2022-02-22 15:22:21 +01:00
12a93c9fe6
Update to plotting of event nodes:
...
Distance is now 1.5, scaling and cutouts are possible
(with some lack of precision).
Still missing: y axis labeling (no numbers, but node names).
2022-02-21 20:19:56 +01:00
342a16d6e1
Add a flag 'alle' (all event nodes) to the plot command (and maybe others).
...
All event nodes with length greater than 1 are translated to vectors
with a common scale (named step) and are assembled in a new plot
named 'digital'. They may be plotted or otherwise used in a
.control section.
2022-02-21 20:16:20 +01:00
0557bc60bf
Prevent crash if nsp is evaluated to 0
2022-02-21 16:56:16 +01:00
20abe9ca38
white spaces
2022-02-20 14:55:10 +01:00
917dab9da7
new flag 'digitop' for the 'plot' command:
...
Plot digital (event nodes) vertically, separated by 0.1
The grid is adapted acordingly.
set xbrushwidth=3 will yield good results.
2022-02-19 17:25:57 +01:00
7130097710
Prevent crash when no simulation has been run and
...
asking for plotting an event node
2022-02-19 17:23:36 +01:00
f2ba4a93fb
Update example for independent grid and line widths
...
in polar or Smith plots.
2022-02-17 15:50:27 +01:00
36da24e251
Add another RF example, drawn from fig. 13.2 of
...
https://qucs-help.readthedocs.io/en/spice4qucs/RF.html
2022-02-17 15:50:05 +01:00
954cc86e59
Add new or upgraded functions as of 01-09-22.
...
Add a function prototype for cmod.
Rename function conj to conju because conj
is already defined differently in complex.h
2022-02-17 15:49:53 +01:00
94a73ffef2
Add changes from 01-09-22, but without the extra extern calls,
...
which have led to a bunch of warnings when compiling with gcc.
2022-02-17 15:49:33 +01:00
e99638c89f
Remove int <--> unsigned int warning
2022-02-17 15:49:20 +01:00
4e1ae255f6
Inlude code into #ifdef RFSPICE ... #endif
...
to allow compiling without pre-processor flag RFSPICE.
2022-02-17 15:49:09 +01:00
909fbc8988
Add RFSPICE (S parameter simulation) to VS for shared ngspice and fftw
2022-02-17 15:49:00 +01:00
de572d2cdf
Remove in <--> unsigned int mismatch
2022-02-17 15:48:52 +01:00
c2d279a1ef
Remove trailing spaces.
2022-02-17 15:48:31 +01:00
648ba396ff
Add missing makefile.am in src/math/dense
...
and add src/math/dense to AC_CONFIG_FILES
in configure.ac
2022-02-17 15:48:25 +01:00
3b0eb41c74
Enable compiling with --enable-sp for RF SPICE
...
Set preprocessor flag RFSPICE
Add new files and directory 'dense' ('dense' is still buggy)
2022-02-17 15:48:19 +01:00
5b8ed0a84e
Remove redundant declarations
2022-02-17 15:48:10 +01:00
2c10c4aebd
S parameter simulation
...
Command '.sp'
arbitrary number of ports
ports made with modified VSRC
Patch provided by Alessio Cacciatori
https://sourceforge.net/p/ngspice/discussion/127605/thread/7a2655c86f/
2022-02-17 15:48:00 +01:00
b774d03162
Change the y-axis direction for a 2d Cider gnuplot. The device surface is at the top and downwards is into the material, which is the normal presentation. Note that the x/y mesh commands in a Cider model also affect the orientation.
2022-02-17 15:45:28 +01:00
62f326b9d0
Fix a bug from previous commit: min -> MIN
2022-02-07 22:39:27 +01:00
0eb272243f
Enable RKM notation also for inductors (e.g. 1u2 for 1.2u)
2022-02-07 16:00:29 +01:00
640fa7e17b
bug 578 crash when scale is too short
...
Warning message if scale and vector length do not match.
Restrict number of points plotted to the smaller of both.
2022-02-07 15:59:43 +01:00
4f82a24df2
Add parameter 'isgrid' to plotting of arcs.
...
Smithgrid and polar plots could not discern between xgridwidth and
xbrushwidth. This is now available, similar to straight line plotting.
Tested also for PS and SVG.
2022-02-01 12:23:29 +01:00
afde37c35d
add y-axis label
2022-02-01 12:21:08 +01:00
16f586b65e
Respect the "tstart" parameter when saving event node data (XSPICE).
...
Fixes Support Request #47 : "XSpice memory usage (TRAN TSTART effect)".
2022-01-28 12:25:36 +01:00
6494befb2f
Request backing store for X11 plot windows. When supported by the X server
...
windows are redrawn vey quickly without replotting.
2022-01-28 12:24:58 +01:00
f4285384e7
Add code in graf.c to merge connected lines with the same slope before
...
plotting. This speeds output and reduces file size when the vector
length is much larger than the number of pixels. It should help with
Feature Request #58 :
"Graph plotting under windows redraw very slow and hard to work with",
but is not a full fix.
2022-01-28 12:24:51 +01:00
Vadim Kuznetsov
Holger Vogt
dwarning
holger
Alessio Cacciatori
Brian Taylor
Giles Atkinson