b1d062668c
When there is no model found, and we have an m devices,
...
set the number of nodes to 4. This has to be fixed (find
a way to detect the number of nodes automatically).
2020-12-22 17:56:19 +01:00
b0a2ab5729
A FIXME: The number of nodes is fixed to 4!
...
Better make this flexible, but how to detect this number safely?
2020-12-22 17:56:19 +01:00
fc70256828
psp102 white spaces and admsXml adaptions
2020-12-22 17:56:19 +01:00
1a5016cd49
psp102 rm unused files
2020-12-22 17:56:19 +01:00
1f2455d4df
PSP102 add description noise functions
2020-12-22 17:56:19 +01:00
8ce89a2b80
update version and improve veriloga compatibility
2020-12-22 17:56:19 +01:00
46122bab52
extend veriloga compatibility for admsXml compiler
2020-12-22 17:56:19 +01:00
db1126c1bb
update version and improve veriloga compatibility
2020-12-22 17:56:19 +01:00
0155d0722b
improve veriloga compatibility
2020-12-22 17:56:19 +01:00
5366f946eb
Remove more compiler warnings
2020-12-22 17:56:19 +01:00
238f8d393a
Suppress some compiler warnings
2020-12-22 17:56:19 +01:00
3c2f6585e0
Add some comment.
2020-12-22 17:56:19 +01:00
e1eb851ec4
Add function rem_unused_mos_models()
...
Netlist is flat at this stage, all numbers expanded,
but not yet parsed into the circuit structure.
So again try to remove unused MOS models.
All binning models are still here when w or l have been
determined by an expression from within the PDK.
2020-12-22 17:56:18 +01:00
19fb3ec38f
make some functions non-ststic to support function
...
rem_unused_mos_models() in inps.c
2020-12-22 17:56:18 +01:00
5ee6a98e4b
Add a comment
2020-12-22 17:56:18 +01:00
043634b60e
Jump over the HSPICE-specific key words
2020-12-22 17:56:18 +01:00
8c253524af
With the new inp_deckcopy_ln treat the first line
...
in the deck equal to all other lines.
2020-12-22 17:56:18 +01:00
8b376b4581
Remove dot lines somewhat later.
2020-12-22 17:56:18 +01:00
777cfcf477
Reduce the memory requirements if there is a PDK with
...
a lot of binning models.
This is a hack and needs testing!
inpcom.c: If an x line, add w and l to the netlist card,
if available.
subckt.c: select a suitable model bin, discard the rest
for each subcircuit, depending on w and l from above.
inpgmod.c: less restrictive equal for real numbers,
allow both min and max boundaries (problem of equating
real numbers), when the selected device has w or l on
the boundary between two model bins.
2020-12-22 17:56:18 +01:00
06ce137741
Remove #ifdef XSPICE from ISRC_CURRENT definition
2020-12-22 17:56:18 +01:00
cbf4305ff8
Remove the XSPICE dependency of the phase parameter for the
...
independent voltage source.
2020-12-22 17:56:18 +01:00
52f3bd7900
Remove the XSPICE dependency of the phase parameter for the
...
independent current source.
2020-12-22 17:56:18 +01:00
fc6f41ae9b
Remove the XSPICE limitation of flag "current" (here->ISRCcurrent)
2020-12-22 17:56:18 +01:00
d6b4184625
typo
2020-12-22 17:56:18 +01:00
12ee985a68
Restrict #pragma warning to Visual Studio only.
2020-12-22 17:56:18 +01:00
c7f732b098
fix hicum warnings
2020-12-22 17:56:18 +01:00
79d6f27d74
fix a typo
2020-12-22 17:56:18 +01:00
f58b38a1ed
suppress warning that is not relevant (we don't use floats)
2020-12-22 17:56:18 +01:00
9072f40b9a
bug 535: re-enale tc1, tc2 even if tokens tc1 or tc2
...
may be part of other tokens as well.
2020-12-22 17:56:18 +01:00
aee35e6ef3
No brackets around instance parameters dtemp, temp
2020-12-22 17:56:18 +01:00
fe24a4135c
spice2g6 poly(19 compat:
...
When counting token, count an expression {...} for the
gain as a single token, even if it contains spaces.
2020-12-22 17:56:18 +01:00
ced7604fc4
fix comment
2020-12-22 17:56:18 +01:00
ff3904e1ac
re-enable 'external' as an instance parameter for current source.
2020-12-22 17:56:18 +01:00
14482ed784
include the duals/dual header into the VS2019 project file
2020-12-22 17:56:18 +01:00
03f9ac82b3
Relax the numerical precision a little bit when
...
comparing real valued time values.
Fixes bug no 536 reported by Victor Kuchynsky
2020-12-22 17:56:18 +01:00
cffd55363d
prevent c++ compiler warning
2020-12-22 17:56:18 +01:00
c43c6f6ca4
improve comment
2020-12-22 17:56:18 +01:00
d24aa7134c
E_constant Vconst 0 TABLE {Max(V(DP)-V(GN),0)}=((20,120))
...
Allow such strange construct, where a single pair x,y will
simplay return a constant y (120 in the above example).
This is used in external devices models and aknowledged
by other simulators.
2020-12-22 17:56:18 +01:00
df913fb260
If T is below 1 uK, lets set it to 0 (avoid slightly negative values due to numerical issues)
2020-12-22 17:56:18 +01:00
c5b5ad67db
only one place for version and copyright message
2020-12-22 17:56:18 +01:00
83fef9306f
re-enable .end with leading spaces
...
a fix to bug #534
2020-12-22 17:56:18 +01:00
025a9fe599
Partially undo commit [ab778d] :
...
revert to aswitch as vswitch replacement
2020-12-22 17:56:18 +01:00
57487d2b0f
clarify the contents of the circarray netlist
2020-12-22 17:56:18 +01:00
87751ad073
Make the ngSpice_Circ(char** circa) more robust:
...
Error message when .end card is missing
Reset if .end card is missing, to allow loading
a netlist again.
NULL as last element is no longer required, but .end card
(this has been implicitedly assumed).
Remove a bug that skippoed the last line (the .end card).
2020-12-22 17:56:18 +01:00
fd79e4b5c4
Don't parse the B source instance parameters, thus prevent memory leaks.
2020-12-22 17:56:18 +01:00
2d34cbddf8
re-write and simplify the tc1, tc2 code for behavioral
...
R, L, C lines invoking the B source.
Enable parameterization of the TCs.
Create a tc string in an extra function, add this string
to the new R, L, C line.
2020-12-22 17:56:18 +01:00
089af45aea
Removal of the "unsopported" folder.
...
It used to contain a unused sensitivity analysis that
has not been touched for the last 15 to 20 yeras.
We are not a museum. If somebody wants to reactivate
this code, of course it is available within the older
ngspice releases.
2020-12-22 17:56:18 +01:00
5a0d213fec
When installing ngspice, do not install the headers
...
(all *.h), nor install dlmain.c and cmpp. Nearly all
users are not interested in creating code models, it is
not documated, and a much better way to create (and test)
code models is from within the ngspice sources (as is
documented in the manual).
2020-12-22 17:56:18 +01:00
1ef4115578
In a command 'meas tran teval when v(2)=1' the rhs
...
should be treated as a number '1', not as a vector v(1)
2020-12-22 17:56:18 +01:00
6055fda73d
spaces
2020-12-22 17:56:18 +01:00
Holger Vogt
dwarning
Markus Mueller