Corrected the handling of toolkit callbacks created by the

"magic::add_dependency" procedure.  The "check" function should always
be called first, followed by the dependencies.  Because otherwise, if
an incorrect value is entered for a device parameter, then it gets
used to calculate dependent values *before* it gets corrected by the
"check" procedure, resulting in an incorrect value being displayed
for the dependent value, even after the bad entry has been corrected.

.github/workflows/canary-matrix.yml

@@ -138,6 +138,8 @@ jobs:
           echo "BUILD_GCC_VERSION=$BUILD_GCC_VERSION" >> $GITHUB_ENV
           echo "BUILD_CLANG_VERSION=$BUILD_CLANG_VERSION" >> $GITHUB_ENV
 
+          sudo apt-get update
+
           if [ -n "$BUILD_GCC_VERSION" ]
           then
             GCCV=$BUILD_GCC_VERSION

.github/workflows/main-aarch64.yml

@@ -33,10 +33,22 @@ jobs:
           cd emsdk
           ./emsdk install latest
           ./emsdk activate latest
+      - name: Emscripten Diagnostic
+        run: |
+          source ./emsdk/emsdk_env.sh
+          echo "===== gcc -dM -E - ====="
+          echo | gcc -dM -E - | sort
+          echo "===== g++ -dM -E - ====="
+          echo | g++ -dM -E - | sort
+          echo "===== emcc -dM -E - ====="
+          echo | emcc -dM -E - | sort
+          echo "===== em++ -dM -E - ====="
+          echo | em++ -dM -E - | sort
       - name: Build
         run: |
           source ./emsdk/emsdk_env.sh
-          emconfigure ./configure --without-cairo --without-opengl --without-x --disable-readline --disable-compression --target=asmjs-unknown-emscripten
+          # The --without and --disable in these build options is due to no WASM library being available for that feature
+          CFLAGS="--std=c17 -D_DEFAULT_SOURCE=1 -DEMSCRIPTEN=1 -g" emconfigure ./configure --without-cairo --without-opengl --without-x --without-tk --without-tcl --disable-readline --disable-compression --target=asmjs-unknown-emscripten
           echo "===== defs.mak ====="
           cat defs.mak
           echo "===== defs.mak ====="

.github/workflows/main.yml

@@ -10,19 +10,6 @@ on:
 
 # A workflow run is made up of one or more jobs that can run sequentially or in parallel
 jobs:
-  vezzal:
-    # The type of runner that the job will run on
-    runs-on: ubuntu-latest
-    # Steps represent a sequence of tasks that will be executed as part of the job
-    steps:
-      - name: Pulling the docker image
-        run: docker pull vezzal/vezzal:v1
-
-      - name: Start the container with the docker image
-        run: docker run -id --name test_magic vezzal/vezzal:v1 bash | exit
-
-      - name: Run the testing on the container and send the mail
-        run: docker exec test_magic /vezzal/test_magic.sh "lankasaicharan123@gmail.com,tim@opencircuitdesign.com" ${{secrets.MAILING_KEY}}
   simple_build_linux:
     runs-on: ubuntu-22.04
     steps:
@@ -45,10 +32,22 @@ jobs:
           cd emsdk
           ./emsdk install latest
           ./emsdk activate latest
+      - name: Emscripten Diagnostic
+        run: |
+          source ./emsdk/emsdk_env.sh
+          echo "===== gcc -dM -E - ====="
+          echo | gcc -dM -E - | sort
+          echo "===== g++ -dM -E - ====="
+          echo | g++ -dM -E - | sort
+          echo "===== emcc -dM -E - ====="
+          echo | emcc -dM -E - | sort
+          echo "===== em++ -dM -E - ====="
+          echo | em++ -dM -E - | sort
       - name: Build
         run: |
           source ./emsdk/emsdk_env.sh
-          emconfigure ./configure --without-cairo --without-opengl --without-x --disable-readline --disable-compression --target=asmjs-unknown-emscripten
+          # The --without and --disable in these build options is due to no WASM library being available for that feature
+          CFLAGS="--std=c17 -D_DEFAULT_SOURCE=1 -DEMSCRIPTEN=1 -g" emconfigure ./configure --without-cairo --without-opengl --without-x --without-tk --without-tcl --disable-readline --disable-compression --target=asmjs-unknown-emscripten
           echo "===== defs.mak ====="
           cat defs.mak
           echo "===== defs.mak ====="

VERSION

@@ -1 +1 @@
-8.3.618
+8.3.636

calma/CalmaRdcl.c

@@ -789,8 +789,8 @@ calmaElementSref(
     char *filename)
 {
     int nbytes, rtype, cols, rows, nref, n, i, savescale;
-    int xlo, ylo, xhi, yhi, xsep, ysep;
+    int xlo, ylo, xhi, yhi, xsep, ysep, angle;
-    bool madeinst = FALSE;
+    bool madeinst = FALSE, rotated = FALSE;
     char *sname = NULL;
     bool isArray = FALSE;
     bool dolookahead = FALSE;
@@ -990,6 +990,14 @@ calmaElementSref(
 	refarray[2].p_x = refarray[2].p_y = 0;
     }
 
+    /* If the array is given an angle, then the meaning of rows and
+     * columns needs to be swapped for the purpose of ignoring
+     * X or Y values in the case of a 1-row or 1-column entry.
+     */
+    angle = GeoTransAngle(&trans, 0);
+    if ((angle == 90) || (angle == 270) || (angle == -90) || (angle == -270))
+	rotated = TRUE;
+
     /* If this is a cell reference, then we scale to magic coordinates
      * and place the cell in the magic database.  However, if this is
      * a cell to be flattened a la "gds flatten", then we keep the GDS
@@ -1000,6 +1008,7 @@ calmaElementSref(
      * is problematic, and probably incorrect.
      */
 
+  
     for (n = 0; n < nref; n++)
     {
 	savescale = calmaReadScale1;
@@ -1011,17 +1020,17 @@ calmaElementSref(
 	 * them as needed.
 	 */
 
-	if ((n > 0) && (rows == 1))
+	if ((n > 0) && ((!rotated && (rows == 1)) || (rotated && (cols == 1))))
 	{
 	    calmaReadX(&refarray[n], 1);
 	    calmaSkipBytes(4);
-	    refarray[n].p_y = 0;
+	    refarray[n].p_y = refarray[0].p_y;
 	}
-	else if ((n > 0) && (cols == 1))
+	else if ((n > 0) && ((!rotated && (cols == 1)) || (rotated && (rows == 1))))
 	{
 	    calmaSkipBytes(4);
 	    calmaReadY(&refarray[n], 1);
-	    refarray[n].p_x = 0;
+	    refarray[n].p_x = refarray[0].p_x;
 	}
 	else
 	    calmaReadPoint(&refarray[n], 1);

cif/CIFgen.c

@@ -25,6 +25,7 @@ static const char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magi
 #include <stdlib.h>             /* for abs() */
 #include <math.h>		/* for ceil() and sqrt() */
 #include <ctype.h>
+#include <string.h>		/* for strcmp() */
 
 #include "utils/magic.h"
 #include "utils/geometry.h"
@@ -5136,12 +5137,13 @@ CIFGenLayer(
     CIFSquaresInfo csi;
     SearchContext scx;
     TileType ttype;
-    char *netname;
+    char *netname, *text;
+    Label *label;
     BloatStruct bls;
     BridgeStruct brs;
     BridgeLimStruct brlims;
     BridgeData *bridge;
-    BloatData *bloats;
+    BloatData *bloats, locbloat;
     bool hstop = FALSE;
     PropertyRecord *proprec;
     char *propvalue;
@@ -5460,9 +5462,12 @@ CIFGenLayer(
 				    (ClientData)NULL);
 	        }
 	        else
+		{
+		    TTMaskSetMask(&bls.connect, &op->co_paintMask);
 		    DBSrPaintArea((Tile *)NULL, cellDef->cd_planes[bloats->bl_plane],
 			    &TiPlaneRect, &bls.connect, cifProcessResetFunc,
 			    (ClientData)NULL);
+		}
 
 		break;
 
@@ -5601,6 +5606,108 @@ CIFGenLayer(
 		}
 		break;
 
+	    case CIFOP_TAGGED:
+		if (hier)
+		{
+		    hstop = TRUE;	/* Stop hierarchical processing */
+		    break;
+		}
+
+		/*
+		 * Find all relevant labels by text matching and then continue
+		 * like CIFOP_BLOATALL.  CIFOP_BLOATALL uses a BloatData record
+		 * which is not part of CIFOP_TAGGED.  Create a BloatData record
+		 * on the fly for each tagged area based on type, and swap it for
+		 * the text, so that cifBloatAllFunc believes this is actually a
+		 * CIFOP_BLOATALL operation.  Note that we don't actually care
+		 * what layer the label is attached to (lab_type).  We are looking
+		 * for labels whose lab_rect values overlap the types that are given
+		 * in the rule.
+		 */
+
+		cifPlane = curPlane;
+		bls.op = op;
+		bls.def = cellDef;
+		bls.temps = temps;
+
+		text = (char *)op->co_client;
+
+	        bloats = &locbloat;
+		if (!TTMaskIsZero(&op->co_cifMask))
+		{
+		    bloats->bl_plane = -1;
+		    for (ttype = 0; ttype < TT_MAXTYPES; ttype++)
+		    {
+			if (TTMaskHasType(&op->co_cifMask, ttype))
+		    	    bloats->bl_distance[ttype] = 1;
+			else
+		    	    bloats->bl_distance[ttype] = 0;
+		    }
+		}
+		else if (!TTMaskIsZero(&op->co_paintMask))
+		{
+		    int plane, pmask;
+		    pmask = DBTechTypesToPlanes(&op->co_paintMask);
+		    for (plane = PL_TECHDEPBASE; plane < DBNumPlanes; plane++)
+			if (PlaneMaskHasPlane(pmask, plane))
+			    break;
+		    bloats->bl_plane = plane;
+		    for (ttype = 0; ttype < TT_MAXTYPES; ttype++)
+		    {
+			if (TTMaskHasType(&op->co_paintMask, ttype))
+		    	    bloats->bl_distance[ttype] = 1;
+			else
+		    	    bloats->bl_distance[ttype] = 0;
+		    }
+		}
+
+		/* Replace the client data with the bloat record */
+		op->co_client = (ClientData)bloats;
+
+	        if (bloats->bl_plane < 0)
+	        {
+		   /* bl_plane == -1 indicates bloating into a CIF templayer,	*/
+		   /* so the only connecting type should be CIF_SOLIDTYPE.	*/
+		   TTMaskSetOnlyType(&bls.connect, CIF_SOLIDTYPE);
+	        }
+	        else
+	        {
+		    int i;
+		    TTMaskZero(&bls.connect);
+		    for (i = 0; i < TT_MAXTYPES; i++)
+			if (bloats->bl_distance[i] != 0)
+			  TTMaskSetType(&bls.connect, i);
+	        }
+
+		for (label = cellDef->cd_labels; label; label = label->lab_next)
+		    if (!strcmp(label->lab_text, text))
+			cifSrTiles(op, &label->lab_rect, cellDef, temps,
+				cifBloatAllFunc, (ClientData)&bls);
+
+	        /* Reset marked tiles */
+
+	        if (bloats->bl_plane < 0)   /* Bloat types are CIF types */
+	        {
+		    bls.temps = temps;
+		    for (ttype = 0; ttype < TT_MAXTYPES; ttype++, bls.temps++)
+			if (bloats->bl_distance[ttype] > 0)
+			    (void) DBSrPaintArea((Tile *)NULL, *bls.temps, &TiPlaneRect,
+				    &CIFSolidBits, cifProcessResetFunc,
+				    (ClientData)NULL);
+	        }
+	        else
+		{
+		    TTMaskSetMask(&bls.connect, &op->co_paintMask);
+		    DBSrPaintArea((Tile *)NULL, cellDef->cd_planes[bloats->bl_plane],
+			    &TiPlaneRect, &bls.connect, cifProcessResetFunc,
+			    (ClientData)NULL);
+		}
+
+		/* Replace the client data */
+		op->co_client = (ClientData)text;
+
+		break;
+
 	    case CIFOP_BOUNDARY:
 		if (hier)
 		{

cif/CIFint.h

@@ -146,6 +146,7 @@ typedef struct cifop
  * CIFOP_BRIDGELIM -	Added 27/07/20---Bridge across catecorner gaps, but with limiting layers
  * CIFOP_MASKHINTS -	Added 12/14/20---Add geometry from cell properties, if any.
  * CIFOP_NOTSQUARE -	Added 2/26/26---Keep only geometry which is not square.
+ * CIFOP_TAGGED -	Added 3/11/26---Find geometry attached to the given text label
  */
 
 #define CIFOP_AND	1
@@ -174,6 +175,7 @@ typedef struct cifop
 #define CIFOP_BRIDGELIM 24
 #define CIFOP_MASKHINTS 25
 #define CIFOP_NOTSQUARE 26
+#define CIFOP_TAGGED    27
 
 /* Definitions of bit fields used in the value of co_client for CIFOP_INTERACT */
 #define CIFOP_INT_NOT	   0x1		/* Inverted sense (not interacting) */

cif/CIFrdcl.c

@@ -613,7 +613,7 @@ CIFPaintCurrent(
 	CIFOp *op;
 
 	plane = CIFGenLayer(cifCurReadStyle->crs_layers[i]->crl_ops,
-	    &TiPlaneRect, (CellDef *)NULL, (CellDef *)NULL,
+	    &TiPlaneRect, cifReadCellDef, cifReadCellDef,
 	    cifCurReadPlanes, FALSE, (ClientData)NULL);
 
 	/* Generate a paint/erase table, then paint from the CIF
@@ -1786,8 +1786,8 @@ CIFReadCellCleanup(
     }
 
     /* Do geometrical processing on the top-level cell. */
+    if (filetype == FILE_CIF) CIFPaintCurrent(filetype);
 
-    CIFPaintCurrent(FILE_CIF);
     DBAdjustLabels(EditCellUse->cu_def, &TiPlaneRect);
     DBReComputeBbox(EditCellUse->cu_def);
     DBWAreaChanged(EditCellUse->cu_def, &EditCellUse->cu_def->cd_bbox,

cif/CIFrdtech.c

@@ -332,7 +332,8 @@ cifNewReadStyle(void)
 		free_magic1_t mm1 = freeMagic1_init();
 		for (op = layer->crl_ops; op != NULL; op = op->co_next)
 		{
-		    if (op->co_opcode == CIFOP_MASKHINTS)
+		    if (op->co_opcode == CIFOP_MASKHINTS ||
+				op->co_opcode == CIFOP_TAGGED)
 			freeMagic((char *)op->co_client);
 		    freeMagic1(&mm1, (char *)op);
 		}
@@ -998,6 +999,8 @@ CIFReadTechLine(
 	newOp->co_opcode = CIFOP_NOTSQUARE;
     else if (strcmp(argv[0], "mask-hints") == 0)
 	newOp->co_opcode = CIFOP_MASKHINTS;
+    else if (strcmp(argv[0], "tagged") == 0)
+	newOp->co_opcode = CIFOP_TAGGED;
     else
     {
 	TechError("Unknown statement \"%s\".\n", argv[0]);
@@ -1028,6 +1031,11 @@ CIFReadTechLine(
             if (argc != 2) goto wrongNumArgs;
             newOp->co_client = (ClientData)StrDup((char **)NULL, argv[1]);
             break;
+        case CIFOP_TAGGED:
+            if (argc != 3) goto wrongNumArgs;
+            newOp->co_client = (ClientData)StrDup((char **)NULL, argv[1]);
+	    CIFParseReadLayers(argv[2], &newOp->co_cifMask, TRUE);
+            break;
     }
 
     /* Link the new CIFOp onto the list. */

cif/CIFtech.c

@@ -1107,6 +1107,8 @@ CIFTechLine(
 	newOp->co_opcode = CIFOP_BBOX;
     else if (strcmp(argv[0], "net") == 0)
 	newOp->co_opcode = CIFOP_NET;
+    else if (strcmp(argv[0], "tagged") == 0)
+	newOp->co_opcode = CIFOP_TAGGED;
     else if (strcmp(argv[0], "maxrect") == 0)
 	newOp->co_opcode = CIFOP_MAXRECT;
     else if (strcmp(argv[0], "boundary") == 0)
@@ -1357,6 +1359,7 @@ bloatCheck:
 	    bloatDone: break;
 
 	case CIFOP_NET:
+	case CIFOP_TAGGED:
 	    if (argc != 3) goto wrongNumArgs;
 	    newOp->co_client = (ClientData)StrDup((char **)NULL, argv[1]);
 	    cifParseLayers(argv[2], CIFCurStyle, &newOp->co_paintMask,
@@ -1671,12 +1674,12 @@ cifComputeRadii(
 
     for (op = layer->cl_ops; op != NULL; op = op->co_next)
     {
-	/* BBOX, NET, and MASKHINTS operators should never be used	*/
+	/* BBOX, NET, TAGGED, and MASKHINTS operators should never be	*/
-	/* hierarchically so ignore any grow/shrink operators that	*/
+	/* used	hierarchically so ignore any grow/shrink operators that	*/
 	/* come after them.						*/
 
 	if (op->co_opcode == CIFOP_BBOX || op->co_opcode == CIFOP_NET ||
-		    op->co_opcode == CIFOP_MASKHINTS)
+		    op->co_opcode == CIFOP_TAGGED || op->co_opcode == CIFOP_MASKHINTS)
 	    break;
 
 	/* If CIF layers are used, switch to the max of current
@@ -1988,8 +1991,8 @@ CIFTechFinal(void)
 		/* Presence of op->co_opcode in CIFOP_OR indicates a copy */
 		/* of the SquaresData pointer from a following operator.  */
 		/* CIFOP_BBOX and CIFOP_MAXRECT uses the co_client field  */
-		/* as a flag field, while CIFOP_NET and CIFOP_MASKHINTS	  */
+		/* as a flag field, while CIFOP_NET, CIFOP_MASKHINTS, and */
-		/* uses it for a string.				  */
+		/* CIFOP_TAGGED use it for a string.			  */
 		else
 		{
 		    switch (op->co_opcode)
@@ -2001,6 +2004,7 @@ CIFTechFinal(void)
 			case CIFOP_MAXRECT:
 			case CIFOP_MANHATTAN:
 			case CIFOP_NET:
+			case CIFOP_TAGGED:
 			    break;
 			case CIFOP_BRIDGELIM:
 			case CIFOP_BRIDGE:
@@ -2536,6 +2540,7 @@ CIFTechOutputScale(
 			case CIFOP_MAXRECT:
 			case CIFOP_MANHATTAN:
 			case CIFOP_NET:
+			case CIFOP_TAGGED:
 			case CIFOP_INTERACT:
 			    break;
 			case CIFOP_BRIDGELIM:
@@ -2651,8 +2656,8 @@ CIFTechOutputScale(
 		    default:
 			/* op->co_opcode in CIFOP_OR is a pointer copy,	*/
 			/* in CIFOP_BBOX and CIFOP_MAXRECT is a	flag,	*/
-			/* and in CIFOP_NET and CIFOP_MASKHINTS is a	*/
+			/* and in CIFOP_NET, CIFOP_MASKHINTS, and	*/
-			/* string.					*/
+			/* CIFOP_TAGGED is a string.			*/
 			break;
 		}
 	    }

commands/CmdE.c

@@ -781,39 +781,82 @@ cmdEraseCellsFunc(
  * Implement the "expand" command.
  *
  * Usage:
- *	expand
+ *	expand [selection|surround|overlap|all] [toggle]
- *	expand toggle
+ *
+ *	"selection" expands cells in the selection.  All other options
+ *	expand cells in the layout.  "all" expands all cells in the
+ *	layout.  "surround" expands cells which the cursor box
+ *	surrounds completely, and "overlap" expands cells which the
+ *	cursor box overlaps.
+ *
+ *	If "toggle" is specified, flips the expanded/unexpanded status.
+ *	Cells which were expanded are unexpanded, and cells which were
+ *	unexpanded are expanded.
+ *
+ *	For backwards compatibility:
+ *	"expand" alone implements "expand overlap".
+ *	"expand toggle" implements "expand selection toggle".
+ *
+ *	Also see:  CmdUnexpand
  *
  * Results:
  *	None.
  *
  * Side effects:
- *	If "toggle" is specified, flips the expanded/unexpanded status
+ *	Expansion state of cells is changed.  May read cells in from
- *	of all selected cells.  Otherwise, aren't any unexpanded cells
+ *	disk, and update bounding boxes that have changed.
- *	left under the box.  May read cells in from disk, and updates
- *	bounding boxes that have changed.
  *
  * ----------------------------------------------------------------------------
  */
 
+#define EXPAND_SELECTION      0
+#define EXPAND_SURROUND       1
+#define EXPAND_OVERLAP        2
+#define EXPAND_ALL            3
+#define EXPAND_HELP           4
+
 void
 CmdExpand(
     MagWindow *w,
     TxCommand *cmd)
 {
-    int windowMask, boxMask, d;
+    int windowMask, boxMask, d, option;
+    bool doToggle = FALSE;
+    const char * const *msg;
     Rect rootRect;
     CellUse *rootBoxUse;
     CellDef *rootBoxDef;
+
     int cmdExpandFunc(CellUse *use, int windowMask);		/* Forward reference. */
 
-    if (cmd->tx_argc > 2 || (cmd->tx_argc == 2
+    static const char * const cmdExpandOption[] = {
-	&& (strncmp(cmd->tx_argv[1], "toggle", strlen(cmd->tx_argv[1])) != 0)))
+	"selection	expand cell instances in the selection",
+	"surround	expand cell instances which the cursor box surrounds",
+	"overlap	expand cell instances which the cursor box overlaps",
+	"all		expand all cell instances",
+	NULL
+    };
+
+    if (cmd->tx_argc > 1)
     {
-	TxError("Usage: %s or %s toggle\n", cmd->tx_argv[0], cmd->tx_argv[0]);
+	if (!strncmp(cmd->tx_argv[cmd->tx_argc - 1], "toggle",
-	return;
+			strlen(cmd->tx_argv[cmd->tx_argc - 1])))
+	{
+	    doToggle = TRUE;
+	    cmd->tx_argc--;
+	}
     }
 
+    if (cmd->tx_argc > 1)
+    {
+	option = Lookup(cmd->tx_argv[1], cmdExpandOption);
+	if (option < 0) option = EXPAND_HELP;
+    }
+    else
+	option = EXPAND_OVERLAP;
+
+    if (option == EXPAND_HELP) goto badusage;
+
     windCheckOnlyWindow(&w, DBWclientID);
     if (w == (MagWindow *) NULL)
     {
@@ -844,23 +887,95 @@ CmdExpand(
             WindScale(d, 1);
 	    TxPrintf("expand: rescaled by %d\n", d);
 	    d = DBLambda[1];
-	    if (cmd->tx_argc == 2) break;	/* Don't toggle twice */
+	    if (doToggle) break;	/* Don't toggle twice */
 	}
 	(void) ToolGetBoxWindow(&rootRect, &boxMask);
 
-	if (cmd->tx_argc == 2)
+	if (option != EXPAND_SELECTION)
-	    SelectExpand(windowMask);
-	else
 	{
 	    if ((boxMask & windowMask) != windowMask)
 	    {
 		TxError("The box isn't in the same window as the cursor.\n");
 		return;
 	    }
-	    DBExpandAll(rootBoxUse, &rootRect, windowMask,
+	}
-			TRUE, cmdExpandFunc, (ClientData)(pointertype) windowMask);
+
+	switch (option)
+	{
+	    case EXPAND_SELECTION:
+		SelectExpand(windowMask,
+			(doToggle) ? DB_EXPAND_TOGGLE : DB_EXPAND,
+			(Rect *)NULL, FALSE);
+		break;
+	    case EXPAND_OVERLAP:
+		if (doToggle)
+		{
+		    DBExpandAll(rootBoxUse, &rootRect, windowMask,
+				DB_EXPAND_TOGGLE | DB_EXPAND_OVERLAP,
+				cmdExpandFunc, (ClientData)(pointertype)windowMask);
+		    SelectExpand(windowMask, 
+				DB_EXPAND_TOGGLE | DB_EXPAND_OVERLAP,
+				&rootRect, FALSE);
+		}
+		else
+		{
+		    DBExpandAll(rootBoxUse, &rootRect, windowMask,
+				DB_EXPAND | DB_EXPAND_OVERLAP,
+				cmdExpandFunc, (ClientData)(pointertype)windowMask);
+		    SelectExpand(windowMask, 
+				DB_EXPAND | DB_EXPAND_OVERLAP,
+				&rootRect, FALSE);
+		}
+		break;
+	    case EXPAND_SURROUND:
+		if (doToggle)
+		{
+		    DBExpandAll(rootBoxUse, &rootRect, windowMask,
+				DB_EXPAND_TOGGLE | DB_EXPAND_SURROUND,
+				cmdExpandFunc, (ClientData)(pointertype)windowMask);
+		    SelectExpand(windowMask, 
+				DB_EXPAND_TOGGLE | DB_EXPAND_SURROUND,
+				&rootRect, TRUE);
+		}
+		else
+		{
+		    DBExpandAll(rootBoxUse, &rootRect, windowMask,
+				DB_EXPAND | DB_EXPAND_SURROUND,
+				cmdExpandFunc, (ClientData)(pointertype)windowMask);
+		    SelectExpand(windowMask, 
+				DB_EXPAND | DB_EXPAND_SURROUND,
+				&rootRect, TRUE);
+		}
+		break;
+	    case EXPAND_ALL:
+		if (doToggle)
+		{
+		    DBExpandAll(rootBoxUse, &TiPlaneRect, windowMask,
+				DB_EXPAND | DB_EXPAND_OVERLAP,
+				cmdExpandFunc, (ClientData)(pointertype)windowMask);
+		    SelectExpand(windowMask, 
+				DB_EXPAND | DB_EXPAND_OVERLAP,
+				(Rect *)NULL, FALSE);
+		}
+		else
+		{
+		    DBExpandAll(rootBoxUse, &TiPlaneRect, windowMask,
+				DB_EXPAND | DB_EXPAND_OVERLAP,
+				cmdExpandFunc, (ClientData)(pointertype)windowMask);
+		    SelectExpand(windowMask, 
+				DB_EXPAND | DB_EXPAND_OVERLAP,
+				(Rect *)NULL, FALSE);
+		}
+		break;
 	}
     } while (d != DBLambda[1]);
+
+    return;
+
+badusage:
+    for (msg = &(cmdExpandOption[0]); *msg != NULL; msg++)
+	TxPrintf("    %s\n", *msg);
+    TxPrintf("    toggle	Toggle the visibility of cell instances.\n");
 }
 
 /* This function is called for each cell whose expansion status changed.

commands/CmdLQ.c

@@ -517,14 +517,14 @@ CmdLoad(
 
 	    DBExpandAll(topuse, &(topuse->cu_bbox),
 			((DBWclientRec *)w->w_clientData)->dbw_bitmask,
-			TRUE, keepGoing, NULL);
+			DB_EXPAND, keepGoing, NULL);
 
 	    DBExpandAll(topuse, &(topuse->cu_bbox),
 			((DBWclientRec *)w->w_clientData)->dbw_bitmask,
-			FALSE, keepGoing, NULL);
+			DB_UNEXPAND, keepGoing, NULL);
 	    DBExpand(topuse,
 			((DBWclientRec *)w->w_clientData)->dbw_bitmask,
-			TRUE);
+			DB_EXPAND);
 
 	    /* We don't want to save and restore DBLambda, because      */
 	    /* loading the file may change their values.  Instead, we   */
@@ -2326,7 +2326,7 @@ CmdDoProperty(
 {
     PropertyRecord *proprec;
     char *value;
-    bool propfound;
+    bool propfound, dolist;
     int proptype, proplen, propvalue, i;
     dlong dvalue;
     int locargc = cmd->tx_argc - argstart + 1;
@@ -2345,6 +2345,20 @@ CmdDoProperty(
 	"string", "integer", "dimension", "double", "plane", "compat", NULL
     };
 
+    /* If the first keyword is "list", then set dolist and increment
+     * the starting argument position.
+     */
+    dolist = FALSE;
+    if (locargc > 1)
+    {
+	if (!strcmp(cmd->tx_argv[argstart], "list"))
+	{
+	    dolist = TRUE;
+	    locargc--;
+	    argstart++;
+	}
+    }
+
     /* If a property type is given, parse it and then strip it from
      * the arguments list.
      */
@@ -2474,7 +2488,7 @@ CmdDoProperty(
 		    for (i = 0; i < proprec->prop_len; i++)
 			TxPrintf("%s ", DBWPrintValue(
 				proprec->prop_value.prop_integer[i], w,
-				((i % 2) == 0) ? TRUE : FALSE);
+				((i % 2) == 0) ? TRUE : FALSE));
 		
 		    TxPrintf("\n");
 		    break;
@@ -2498,9 +2512,9 @@ CmdDoProperty(
 #ifdef MAGIC_WRAPPER
 	    /* If the command was "cellname list property ...", then	*/
 	    /* just return NULL if the property was not found.		*/
-	    if (strcmp(cmd->tx_argv[1], "list"))
+	    if (!dolist)
 #endif
-		TxError("Property name \"%s\" is not defined\n", cmd->tx_argv[1]);
+		TxError("Property name \"%s\" is not defined\n", cmd->tx_argv[argstart]);
 	}
     }
     else if (locargc >= 3)
@@ -2667,14 +2681,13 @@ CmdDoProperty(
 			    }
 			}
 			if (proplen > 0)
-			{
 			    proprec = (PropertyRecord *)mallocMagic(
 					sizeof(PropertyRecord) +
 					(proplen - 2) * sizeof(int));
-			    proprec->prop_type = proptype;
-			    proprec->prop_len = proplen;
-			}
 		    }
+		    proprec->prop_type = proptype;
+		    proprec->prop_len = proplen;
+
 		    /* Second pass */
 		    value = cmd->tx_argv[argstart + 1];
 		    for (proplen = 0; proplen < proprec->prop_len; proplen++)
@@ -2842,18 +2855,18 @@ int
 printPlanePropFunc(
     Tile *tile,
     TileType dinfo,
-    ClientData cdata	/* (unused) */
+    ClientData cdata)	/* (unused) */
 {
     Rect r;
     MagWindow *w;
 
-    TiToRect(tile, &r)
+    TiToRect(tile, &r);
     windCheckOnlyWindow(&w, DBWclientID); 
 
-    TxPrintf("%s ", DBWPrintValue(r.r_xbot, w, TRUE); 
+    TxPrintf("%s ", DBWPrintValue(r.r_xbot, w, TRUE));
-    TxPrintf("%s ", DBWPrintValue(r.r_ybot, w, FALSE); 
+    TxPrintf("%s ", DBWPrintValue(r.r_ybot, w, FALSE));
-    TxPrintf("%s ", DBWPrintValue(r.r_xtop, w, TRUE); 
+    TxPrintf("%s ", DBWPrintValue(r.r_xtop, w, TRUE));
-    TxPrintf("%s ", DBWPrintValue(r.r_ytop, w, FALSE); 
+    TxPrintf("%s ", DBWPrintValue(r.r_ytop, w, FALSE));
     return 0;
 }
 
@@ -2917,19 +2930,19 @@ printPropertiesFunc(
     switch (proprec->prop_type)
     {
 	case PROPERTY_TYPE_STRING:
-	    TxPrintf("%s = %s\n", name, (const char *)proprec->prop_string);
+	    TxPrintf("%s = %s\n", name, (const char *)proprec->prop_value.prop_string);
 	    break;
 	case PROPERTY_TYPE_INTEGER:
 	    TxPrintf("%s = ", name);
 	    for (i = 0; i < proprec->prop_len; i++)
-		TxPrintf("%d ", proprec->prop_integer[i]);
+		TxPrintf("%d ", proprec->prop_value.prop_integer[i]);
 	    TxPrintf("\n");
 	    break;
 	case PROPERTY_TYPE_DIMENSION:
 	    TxPrintf("%s = ", name);
 	    for (i = 0; i < proprec->prop_len; i++)
 		TxPrintf("%s ", DBWPrintValue(proprec->prop_value.prop_integer[i],
-			w, ((i % 2) == 0) ? TRUE : FALSE); 
+			w, ((i % 2) == 0) ? TRUE : FALSE));
 	    TxPrintf("\n");
 	    break;
 	case PROPERTY_TYPE_PLANE:
@@ -2942,7 +2955,7 @@ printPropertiesFunc(
 	case PROPERTY_TYPE_DOUBLE:
 	    TxPrintf("%s = ", name);
 	    for (i = 0; i < proprec->prop_len; i++)
-		TxPrintf("%"DLONG_PREFIX"d ", proprec->prop_double[i]);
+		TxPrintf("%"DLONG_PREFIX"d ", proprec->prop_value.prop_double[i]);
 	    TxPrintf("\n");
 	    break;
     }

commands/CmdRS.c

@@ -1801,13 +1801,18 @@ cmdLabelSizeFunc(
 
     if (value == NULL)
     {
+	char *labsize;
+	MagWindow *w;
+
+	windCheckOnlyWindow(&w, DBWclientID);
+	labsize = DBWPrintValue(label->lab_size / 8, w, FALSE);
+
 #ifdef MAGIC_WRAPPER
 	lobj = Tcl_GetObjResult(magicinterp);
-	Tcl_ListObjAppendElement(magicinterp, lobj,
+	Tcl_ListObjAppendElement(magicinterp, lobj, Tcl_NewStringObj(labsize, -1));
-			Tcl_NewDoubleObj((double)label->lab_size / 8.0));
 	Tcl_SetObjResult(magicinterp, lobj);
 #else
-	TxPrintf("%g\n", (double)label->lab_size / 8.0);
+	TxPrintf("%s\n", labsize);
 #endif
     }
     else if (label->lab_size != *value)
@@ -1952,18 +1957,22 @@ cmdLabelOffsetFunc(
 
     if (point == NULL)
     {
+	char *laboffx, *laboffy;
+	MagWindow *w;
+
+	windCheckOnlyWindow(&w, DBWclientID);
+	laboffx = DBWPrintValue(label->lab_offset.p_x / 8, w, TRUE);
+	laboffy = DBWPrintValue(label->lab_offset.p_x / 8, w, FALSE);
+
 #ifdef MAGIC_WRAPPER
 	lobj = Tcl_GetObjResult(magicinterp);
 	pobj = Tcl_NewListObj(0, NULL);
 	Tcl_ListObjAppendElement(magicinterp, lobj, pobj);
-	Tcl_ListObjAppendElement(magicinterp, pobj,
+	Tcl_ListObjAppendElement(magicinterp, pobj, Tcl_NewStringObj(laboffx, -1));
-			Tcl_NewDoubleObj((double)label->lab_offset.p_x / 8.0));
+	Tcl_ListObjAppendElement(magicinterp, pobj, Tcl_NewStringObj(laboffy, -1));
-	Tcl_ListObjAppendElement(magicinterp, pobj,
-			Tcl_NewDoubleObj((double)label->lab_offset.p_y / 8.0));
 	Tcl_SetObjResult(magicinterp, lobj);
 #else
-	TxPrintf("%g %g\n", (double)(label->lab_offset.p_x) / 8.0,
+	TxPrintf("%s %s\n", laboffx, laboffy);
-		(double)(label->lab_offset.p_y) / 8.0);
 #endif
     }
     else if (!GEO_SAMEPOINT(label->lab_offset, *point))
@@ -2212,9 +2221,13 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelTextFunc, (locargc == 3) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)cmd->tx_argv[argstart + 1] : (ClientData)NULL);
+				cmdLabelTextFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelTextFunc,
+				(ClientData)cmd->tx_argv[argstart + 1]);
 	    }
 	    break;
 
@@ -2280,9 +2293,12 @@ CmdSetLabel(
 		}
 		else if (EditCellUse)
 		{
-		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		    if (locargc == 2)
-				cmdLabelFontFunc, (locargc == 3) ?
+			SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-				(ClientData)&font : (ClientData)NULL);
+				cmdLabelFontFunc, (ClientData)NULL);
+		    else
+			SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelFontFunc, (ClientData)&font);
 		}
 	    }
 	    break;
@@ -2310,9 +2326,12 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelJustFunc, (locargc == 3) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)&pos : (ClientData)NULL);
+				cmdLabelJustFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelJustFunc, (ClientData)&pos);
 	    }
 	    break;
 
@@ -2341,9 +2360,12 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelSizeFunc, (locargc == 3) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)&size : (ClientData)NULL);
+				cmdLabelSizeFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelSizeFunc, (ClientData)&size);
 	    }
 	    break;
 
@@ -2393,9 +2415,12 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelOffsetFunc, (locargc != 2) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)&offset : (ClientData)NULL);
+				cmdLabelOffsetFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelOffsetFunc, (ClientData)&offset);
 	    }
 	    break;
 
@@ -2459,10 +2484,12 @@ CmdSetLabel(
 		    rect.r_ytop = cmdScaleCoord(w, cmd->tx_argv[argstart + 4],
 				TRUE, FALSE, 1);
 		}
-		SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if ((locargc == 3) || (locargc == 6))
-				cmdLabelRectFunc,
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
-				((locargc == 6) || (locargc == 3)) ?
+				cmdLabelRectFunc, (ClientData)&rect);
-				(ClientData)&rect : (ClientData)NULL);
+		else
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelRectFunc, (ClientData)NULL);
 	    }
 	    break;
 
@@ -2488,9 +2515,12 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelRotateFunc, (locargc == 3) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)&rotate : (ClientData)NULL);
+				cmdLabelRotateFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelRotateFunc, (ClientData)&rotate);
 	    }
 	    break;
 
@@ -2522,9 +2552,12 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelStickyFunc, (locargc == 3) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)&flags : (ClientData)NULL);
+				cmdLabelStickyFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelStickyFunc, (ClientData)&flags);
 	    }
 	    break;
 
@@ -2563,9 +2596,12 @@ CmdSetLabel(
 	    }
 	    else if (EditCellUse)
 	    {
-		SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
+		if (locargc == 2)
-			cmdLabelLayerFunc, (locargc == 3) ?
+		    SelEnumLabels(&DBAllTypeBits, TRUE, (bool *)NULL,
-			(ClientData)&ttype : (ClientData)NULL);
+				cmdLabelLayerFunc, (ClientData)NULL);
+		else
+		    SelEnumLabelsMirror(&DBAllTypeBits, TRUE, (bool *)NULL,
+				cmdLabelLayerFunc, (ClientData)&ttype);
 	    }
 	    break;
 

commands/CmdSubrs.c

@@ -1239,7 +1239,7 @@ cmdExpandOneLevel(
     extern int cmdExpand1func(CellUse *cu, ClientData bitmask);
 
     /* first, expand this cell use */
-    DBExpand(cu, bitmask, expand);
+    DBExpand(cu, bitmask, expand ? DB_EXPAND : DB_UNEXPAND);
 
     /* now, unexpand its direct children (ONE LEVEL ONLY) */
     if (expand)
@@ -1251,7 +1251,7 @@ cmdExpand1func(
     CellUse *cu,
     ClientData bitmask)
 {
-    DBExpand(cu, (int)CD2INT(bitmask), FALSE);
+    DBExpand(cu, (int)CD2INT(bitmask), DB_UNEXPAND);
     return 0;
 }
 

commands/CmdTZ.c

@@ -702,32 +702,62 @@ CmdTool(
  * Implement the "unexpand" command.
  *
  * Usage:
- *	unexpand
+ *	unexpand [selection|surround|overlap|all]
+ *
+ *	"selection" unexpands (hides) cells in the selection.  All
+ *	other options unexpand cells in the layout.  "all" unexpands
+ *	all cells in the layout.  "surround" unexpannds cells which
+ *	the cursor box surrounds completely, and "overlap" unexpands
+ *	cells which the cursor box overlaps.
+ *
+ *	For backwards compatibility:
+ *	"unexpand" alone implements "unexpand surround".
+ *
+ *	Also see:  CmdExpand
  *
  * Results:
  *	None.
  *
  * Side effects:
- *	Unexpands all cells under the box that don't completely
+ *	Changes the expansion state of cells.
- *	contain the box.
  *
  * ----------------------------------------------------------------------------
  */
 
+#define UNEXPAND_SELECTION	0
+#define UNEXPAND_SURROUND	1
+#define UNEXPAND_OVERLAP	2
+#define UNEXPAND_ALL		3
+#define UNEXPAND_HELP		4
+
 void
 CmdUnexpand(
     MagWindow *w,
     TxCommand *cmd)
 {
-    int windowMask, boxMask;
+    int windowMask, boxMask, option;
+    const char * const *msg;
     Rect rootRect;
+
     int cmdUnexpandFunc(CellUse *use, int windowMask);		/* Forward reference. */
 
-    if (cmd->tx_argc != 1)
+    static const char * const cmdUnexpandOption[] = {
+	"selection	expand cell instances in the selection",
+	"surround	expand cell instances which the cursor box surrounds",
+	"overlap	expand cell instances which the cursor box overlaps",
+	"all		expand all cell instances",
+	NULL
+    };
+
+    if (cmd->tx_argc > 1)
     {
-	TxError("Usage: %s\n", cmd->tx_argv[0]);
+	option = Lookup(cmd->tx_argv[1], cmdUnexpandOption);
-	return;
+	if (option < 0) option = UNEXPAND_HELP;
     }
+    else
+	option = UNEXPAND_SURROUND;
+
+    if (option == UNEXPAND_HELP) goto badusage; 
 
     windCheckOnlyWindow(&w, DBWclientID);
     if (w == (MagWindow *) NULL)
@@ -743,8 +773,42 @@ CmdUnexpand(
 	TxError("The box isn't in the same window as the cursor.\n");
 	return;
     }
-    DBExpandAll(((CellUse *) w->w_surfaceID), &rootRect, windowMask,
+
-	    FALSE, cmdUnexpandFunc, (ClientData)(pointertype) windowMask);
+    switch (option)
+    {
+	case UNEXPAND_SELECTION:
+	    SelectExpand(windowMask, DB_UNEXPAND, (Rect *)NULL, FALSE);
+	    break;
+	case UNEXPAND_OVERLAP:
+	    DBExpandAll(((CellUse *)w->w_surfaceID), &rootRect, windowMask,
+			DB_UNEXPAND | DB_EXPAND_OVERLAP,
+			cmdUnexpandFunc, (ClientData)(pointertype)windowMask);
+	    SelectExpand(windowMask,
+			DB_UNEXPAND | DB_EXPAND_OVERLAP,
+			&rootRect, FALSE);
+	    break;
+	case UNEXPAND_SURROUND:
+	    DBExpandAll(((CellUse *)w->w_surfaceID), &rootRect, windowMask,
+			DB_UNEXPAND | DB_EXPAND_SURROUND,
+			cmdUnexpandFunc, (ClientData)(pointertype)windowMask);
+	    SelectExpand(windowMask,
+			DB_UNEXPAND | DB_EXPAND_SURROUND,
+			&rootRect, TRUE);
+	    break;
+	case UNEXPAND_ALL:
+	    DBExpandAll(((CellUse *)w->w_surfaceID), &TiPlaneRect, windowMask,
+			DB_UNEXPAND | DB_EXPAND_OVERLAP,
+			cmdUnexpandFunc, (ClientData)(pointertype)windowMask);
+	    SelectExpand(windowMask,
+			DB_UNEXPAND | DB_EXPAND_OVERLAP,
+			(Rect *)NULL);
+	    break;
+    }
+    return;
+
+badusage:
+    for (msg = &(cmdUnexpandOption[0]); *msg != NULL; msg++)
+        TxPrintf("    %s\n", *msg);
 }
 
 /* This function is called for each cell whose expansion status changed.

database/DBcellsrch.c

@@ -588,6 +588,25 @@ DBTreeSrLabels(scx, mask, xMask, tpath, flags, func, cdarg)
 	if (!DBCellRead(def, TRUE, TRUE, NULL))
 	    return 0;
 
+    if (flags & TF_LABEL_REVERSE_SEARCH)
+    {
+	/* Search children first */
+	filter.tf_func = func;
+	filter.tf_arg = cdarg;
+	filter.tf_mask = mask;
+	filter.tf_xmask = xMask;
+	filter.tf_tpath = tpath;
+	filter.tf_flags = flags;
+
+	scx2 = *scx;
+	if (scx2.scx_area.r_xbot > TiPlaneRect.r_xbot) scx2.scx_area.r_xbot -= 1;
+	if (scx2.scx_area.r_ybot > TiPlaneRect.r_ybot) scx2.scx_area.r_ybot -= 1;
+	if (scx2.scx_area.r_xtop < TiPlaneRect.r_xtop) scx2.scx_area.r_xtop += 1;
+	if (scx2.scx_area.r_ytop < TiPlaneRect.r_ytop) scx2.scx_area.r_ytop += 1;
+	if (DBCellSrArea(&scx2, dbCellLabelSrFunc, (ClientData) &filter))
+	    return 1;
+    }
+
     for (lab = def->cd_labels; lab; lab = lab->lab_next)
     {
 	if (SigInterruptPending) break;
@@ -640,6 +659,8 @@ DBTreeSrLabels(scx, mask, xMask, tpath, flags, func, cdarg)
 		return (1);
     }
 
+    if (flags & TF_LABEL_REVERSE_SEARCH) return 0;  /* children already searched */
+
     filter.tf_func = func;
     filter.tf_arg = cdarg;
     filter.tf_mask = mask;
@@ -711,6 +732,16 @@ dbCellLabelSrFunc(scx, fp)
 	}
     }
 
+    /* If fp->tf_flags has TF_LABEL_REVERSE_SEARCH, then search child
+     * uses first, then the parent.  This is for display, so that if
+     * a child cell and parent cell have overlapping labels, the parent
+     * label is the one on top.
+     */
+
+    if (fp->tf_flags & TF_LABEL_REVERSE_SEARCH)
+	if (DBCellSrArea(scx, dbCellLabelSrFunc, (ClientData) fp))
+	    result = 1;
+
     /* Apply the function first to any of the labels in this def. */
 
     result = 0;
@@ -732,9 +763,11 @@ dbCellLabelSrFunc(scx, fp)
 	}
     }
 
-    /* Now visit each child use recursively */
+    /* Now visit each child use recursively, if not doing a reverse search */
-    if (DBCellSrArea(scx, dbCellLabelSrFunc, (ClientData) fp))
+
-	result = 1;
+    if (!(fp->tf_flags & TF_LABEL_REVERSE_SEARCH))
+	if (DBCellSrArea(scx, dbCellLabelSrFunc, (ClientData) fp))
+	    result = 1;
 
 cleanup:
     /* Remove the trailing pathname component from the TerminalPath */

database/DBexpand.c

@@ -39,6 +39,7 @@ struct expandArg
 {
     bool	ea_deref;	/* TRUE if root def dereference flag is set */
     int		ea_xmask;	/* Expand mask. */
+    int		ea_type;	/* Expand, unexpand, or toggle */
     int		(*ea_func)();	/* Function to call for each cell whose
 				 * status is changed.
 				 */
@@ -67,15 +68,22 @@ struct expandArg
  */
 
 void
-DBExpand(cellUse, expandMask, expandFlag)
+DBExpand(cellUse, expandMask, expandType)
     CellUse *cellUse;
     int expandMask;
-    bool expandFlag;
+    int expandType;
 {
     CellDef *def;
-
+    bool expandFlag, expandTest;
-    if (DBDescendSubcell(cellUse, expandMask) == expandFlag)
+ 
-	return;
+    expandTest = DBDescendSubcell(cellUse, expandMask);
+    if ((expandType & DB_EXPAND_MASK) == DB_EXPAND_TOGGLE)
+	expandFlag = expandTest;
+    else
+    {
+	expandFlag = ((expandType & DB_EXPAND_MASK) == DB_EXPAND) ? TRUE : FALSE;
+	if (expandFlag == expandTest) return;
+    }
 
     if (expandFlag)
     {
@@ -130,17 +138,17 @@ DBExpand(cellUse, expandMask, expandFlag)
  */
 
 void
-DBExpandAll(rootUse, rootRect, expandMask, expandFlag, func, cdarg)
+DBExpandAll(rootUse, rootRect, expandMask, expandType, func, cdarg)
     CellUse *rootUse;	/* Root cell use from which search begins */
     Rect *rootRect;	/* Area to be expanded, in root coordinates */
     int expandMask;	/* Window mask in which cell is to be expanded */
-    bool expandFlag;	/* TRUE => expand, FALSE => unexpand */
+    int expandType;	/* DB_EXPAND, DB_UNEXPAND, DB_EXPAND_TOGGLE */
     int (*func)();	/* Function to call for each cell whose expansion
 			 * status is modified.  NULL means don't call anyone.
 			 */
     ClientData cdarg;	/* Argument to pass to func. */
 {
-    int dbExpandFunc(), dbUnexpandFunc();
+    int dbExpandFunc();
     SearchContext scontext;
     struct expandArg arg;
 
@@ -148,29 +156,26 @@ DBExpandAll(rootUse, rootRect, expandMask, expandFlag, func, cdarg)
 	(void) DBCellRead(rootUse->cu_def, TRUE, TRUE, NULL);
 
     /*
-     * Walk through the area and set the expansion state
+     * Walk through the area and set the expansion state appropriately.
-     * appropriately.
      */
 
     arg.ea_xmask = expandMask;
     arg.ea_func = func;
     arg.ea_arg = cdarg;
+    arg.ea_type = expandType;
     arg.ea_deref = (rootUse->cu_def->cd_flags & CDDEREFERENCE) ? TRUE : FALSE;
 
     scontext.scx_use = rootUse;
     scontext.scx_trans = GeoIdentityTransform;
     scontext.scx_area = *rootRect;
-    if (expandFlag)
+    DBCellSrArea(&scontext, dbExpandFunc, (ClientData) &arg);
-	DBCellSrArea(&scontext, dbExpandFunc, (ClientData) &arg);
-    else
-	DBCellSrArea(&scontext, dbUnexpandFunc, (ClientData) &arg);
 }
 
 /*
  * dbExpandFunc --
  *
  * Filter function called by DBCellSrArea on behalf of DBExpandAll above
- * when cells are being expanded.
+ * when cells are being expanded, unexpanded, or toggled.
  */
 
 int
@@ -184,68 +189,55 @@ dbExpandFunc(scx, arg)
 {
     CellUse *childUse = scx->scx_use;
     int n = DBLambda[1];
+    int expandTest;
+    int expandType = (arg->ea_type & DB_EXPAND_MASK);
+    int expandSurround = (arg->ea_type & DB_EXPAND_SURROUND_MASK);
+    bool surround;
+
+    expandTest = DBDescendSubcell(childUse, arg->ea_xmask);
 
     /*
      * Change the expansion status of this cell if necessary.  Call the
      * client's function if the expansion status has changed.
      */
 
-    if (!DBDescendSubcell(childUse, arg->ea_xmask))
+    if (!expandTest && ((expandType == DB_EXPAND) || (expandType == DB_EXPAND_TOGGLE)))
     {
-	/* If the cell is unavailable, then don't expand it.
+	surround = (!GEO_SURROUND(&childUse->cu_def->cd_bbox, &scx->scx_area)
-	 */
+			|| GEO_SURROUND(&scx->scx_area, &childUse->cu_def->cd_bbox));
-	if ((childUse->cu_def->cd_flags & CDAVAILABLE) == 0)
+	if (surround || (expandSurround == DB_EXPAND_OVERLAP))
 	{
-	    /* If the parent is dereferenced, then the child should be, too */
+	    /* If the cell is unavailable, then don't expand it.
-	    if (arg->ea_deref) childUse->cu_def->cd_flags |= CDDEREFERENCE;
+	     */
-	    if(!DBCellRead(childUse->cu_def, TRUE, TRUE, NULL))
+	    if ((childUse->cu_def->cd_flags & CDAVAILABLE) == 0)
 	    {
-		TxError("Cell %s is unavailable.  It could not be expanded.\n",
+		/* If the parent is dereferenced, then the child should be, too */
-			childUse->cu_def->cd_name);
+		if (arg->ea_deref) childUse->cu_def->cd_flags |= CDDEREFERENCE;
-		return 2;
+		if (!DBCellRead(childUse->cu_def, TRUE, TRUE, NULL))
+		{
+		    TxError("Cell %s is unavailable.  It could not be expanded.\n",
+				childUse->cu_def->cd_name);
+		    return 2;
+		}
+	    }
+
+	    childUse->cu_expandMask |= arg->ea_xmask;
+	    expandTest = TRUE;
+	    if (arg->ea_func != NULL)
+	    {
+		if ((*arg->ea_func)(childUse, arg->ea_arg) != 0) return 1;
 	    }
 	}
-
-	childUse->cu_expandMask |= arg->ea_xmask;
-	if (arg->ea_func != NULL)
-	{
-	    if ((*arg->ea_func)(childUse, arg->ea_arg) != 0) return 1;
-	}
     }
-
+    else if (expandTest && ((expandType == DB_UNEXPAND) ||
-    if (DBCellSrArea(scx, dbExpandFunc, (ClientData) arg))
+			(expandType == DB_EXPAND_TOGGLE)))
-	return 1;
-    return 2;
-}
-
-/*
- * dbUnexpandFunc --
- *
- * Filter function called by DBCellSrArea on behalf of DBExpandAll above
- * when cells are being unexpanded.
- */
-
-int
-dbUnexpandFunc(scx, arg)
-    SearchContext *scx;	/* Pointer to search context containing
-					 * child use, search area in coor-
-					 * dinates of the child use, and
-					 * transform back to "root".
-					 */
-    struct expandArg *arg;	/* Client data from caller */
-{
-    CellUse *childUse = scx->scx_use;
-
-    /*
-     * Change the expansion status of this cell if necessary.
-     */
-
-    if (DBDescendSubcell(childUse, arg->ea_xmask))
     {
-	if (!GEO_SURROUND(&childUse->cu_def->cd_bbox, &scx->scx_area)
+	surround = (!GEO_SURROUND(&childUse->cu_def->cd_bbox, &scx->scx_area)
-	    || GEO_SURROUND(&scx->scx_area, &childUse->cu_def->cd_bbox))
+			|| GEO_SURROUND(&scx->scx_area, &childUse->cu_def->cd_bbox));
+	if (surround || (expandSurround == DB_EXPAND_OVERLAP))
 	{
 	    childUse->cu_expandMask &= ~arg->ea_xmask;
+	    expandTest = FALSE;
 
 	    /* Call the client's function, if there is one. */
 
@@ -256,11 +248,7 @@ dbUnexpandFunc(scx, arg)
 	}
     }
 
-    /* Don't recursively search things that aren't already expanded. */
+    if (DBCellSrArea(scx, dbExpandFunc, (ClientData) arg))
-
-    else return 2;
-
-    if (DBCellSrArea(scx, dbUnexpandFunc, (ClientData) arg))
 	return 1;
     return 2;
 }

database/DBio.c

@@ -2594,7 +2594,16 @@ dbReadProperties(cellDef, line, len, f, scalen, scaled)
 			while (isspace(*pptr) && (*pptr != '\0')) pptr++;
 			if (!isspace(*pptr))
 			{
-			    sscanf(pptr, "%d", &ival);
+			    if (sscanf(pptr, "%d", &ival) != 1)
+			    {
+				TxError("Mask-hint \"%s\" has non-integer values!",
+					pptr);
+				DBFreePaintPlane(proprec->prop_value.prop_plane);
+				TiFreePlane(proprec->prop_value.prop_plane);
+				freeMagic((char *)proprec);
+				proprec = (PropertyRecord *)NULL;
+				break;
+			    }
 			    if (scalen > 1) ival *= scalen;
 			    if (scaled > 1) ival /= scaled;
 			    switch (numvals)
@@ -2622,11 +2631,11 @@ dbReadProperties(cellDef, line, len, f, scalen, scaled)
 			    }
 			    while (!isspace(*pptr) && (*pptr != '\0')) pptr++;
 			}
-			if (numvals == 0)
+		    }
-			{
+		    if (numvals != 0)
-			    TxError("Mask-hint property number of values is not"
+		    {
+			TxError("Mask-hint property number of values is not"
 				" divisible by four.  Truncated.\n");
-			}
 		    }
 		    (void) DBPropPut(cellDef, propertyname, proprec);
 		}
@@ -4409,7 +4418,7 @@ DBCellWriteCommandFile(cellDef, f)
 	}
 	else
 	{
-	    fprintf(f, "label %s %s %d %d %d %d %s %s\n",
+	    fprintf(f, "label %s %s %d %d %d %d %s %s%s\n",
 			lab->lab_text,
 			DBFontList[lab->lab_font]->mf_name,
 			lab->lab_size >> 3,
@@ -4417,15 +4426,10 @@ DBCellWriteCommandFile(cellDef, f)
 			lab->lab_offset.p_x,
 			lab->lab_offset.p_y,
 			directionNames[lab->lab_just],
+			(lab->lab_flags & LABEL_STICKY) ? "-" : "",
 			DBTypeLongName(lab->lab_type));
 	}
 
-	if (lab->lab_flags & LABEL_STICKY)
-	{
-	    fprintf(f, "select area label\n");
-	    fprintf(f, "setlabel sticky true\n");
-	}
-
 	if (lab->lab_flags & PORT_DIR_MASK)
 	{
 	    if (!(lab->lab_flags & LABEL_STICKY))

database/database.h.in

@@ -651,6 +651,7 @@ typedef struct treeFilter
 #define TF_LABEL_ATTACH_NOT_SE	0x10	/* Same as above, ignore tile SE corner */
 #define TF_LABEL_ATTACH_NOT_SW	0x20	/* Same as above, ignore tile SW corner */
 #define TF_LABEL_ATTACH_CORNER	0x3C	/* Mask of the four types above */
+#define TF_LABEL_REVERSE_SEARCH 0x40	/* Search children before parent */
 
 /* To do:  Make the tpath entries dynamically allocated */
 #define FLATTERMSIZE 4096		/* Used for generating flattened labels */
@@ -1061,6 +1062,19 @@ extern unsigned char DBVerbose;	/* If 0, don't print any messages	*/
 #define DB_VERBOSE_WARN	2
 #define DB_VERBOSE_ALL	3
 
+/* ---------- Definitions for expanding/unexpanding cells --------------*/
+
+/* Selection expansion flags */
+#define DB_EXPAND_MASK	 	3	/* 1 = expand, 0 = unexpand, 2 = toggle */
+#define DB_EXPAND_SURROUND_MASK	4	/* 1 = surround, 0 = touch */
+
+/* Selection expansion values */
+#define DB_EXPAND      	   0
+#define DB_UNEXPAND        1
+#define DB_EXPAND_TOGGLE   2
+#define DB_EXPAND_SURROUND 4
+#define DB_EXPAND_OVERLAP  0
+
 /* ------------------ Exported technology variables ------------------- */
 
 /***

dbwind/DBWbuttons.c

@@ -131,8 +131,11 @@ DBWAddButtonHandler(
     for (i = 0; i < MAXBUTTONHANDLERS; i++)
     {
 	if (dbwButtonHandlers[i] != NULL) continue;
-	(void) StrDup(&dbwButtonHandlers[i], name);
+	StrDup(&dbwButtonHandlers[i], name);
-	(void) StrDup(&dbwButtonDoc[i], doc);
+	if (doc != NULL)
+	    StrDup(&dbwButtonDoc[i], doc);
+	else
+	    dbwButtonDoc[i] = (char *)NULL;
 	dbwButtonProcs[i] = proc;
 	dbwButtonCursors[i] = cursor;
 	return;
@@ -273,6 +276,37 @@ DBWGetButtonHandler()
     return dbwButtonHandlers[dbwButtonCurrentIndex];
 }
 
+/*
+ * ----------------------------------------------------------------------------
+ *
+ * DBWButtonHandlerIndex()
+ *
+ *	Given a string, return the index of the button handler.  If the
+ *	string does not correspond to any button handler name, then
+ *	return -1.
+ *
+ * Results:
+ *	Index of button handler, if it exists;  -1 otherwise.
+ *
+ * Side effects:
+ *	None.
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+int
+DBWButtonHandlerIndex(char *toolName)
+{
+    int i;
+
+    for (i = 0; i < MAXBUTTONHANDLERS; i++)
+    {
+	if (dbwButtonHandlers[i] == NULL) return -1;
+	else if (!strcmp(toolName, dbwButtonHandlers[i])) return i;
+    }
+    return -1;
+}
+
 /*
  * ----------------------------------------------------------------------------
  *
@@ -294,7 +328,10 @@ DBWGetButtonHandler()
 void
 DBWPrintButtonDoc()
 {
-    TxPrintf("%s", dbwButtonDoc[dbwButtonCurrentIndex]);
+    if (dbwButtonDoc[dbwButtonCurrentIndex])
+	TxPrintf("%s", dbwButtonDoc[dbwButtonCurrentIndex]);
+    else
+	TxPrintf("(no usage information)\n");
 }
 
 

dbwind/DBWdisplay.c

@@ -421,7 +421,8 @@ DBWredisplay(w, rootArea, clipArea)
         /* Set style information beforehand */
         GrSetStuff(STYLE_LABEL);
 	(void) DBTreeSrLabels(&scontext, &DBAllTypeBits, bitMask,
-		(TerminalPath *) NULL, TF_LABEL_DISPLAY | TF_LABEL_ATTACH,
+		(TerminalPath *) NULL,
+		TF_LABEL_DISPLAY | TF_LABEL_ATTACH | TF_LABEL_REVERSE_SEARCH,
 		dbwLabelFunc, (ClientData)(&crec->dbw_visibleLayers));
 	GrClipTo(&rootClip);
     }

dbwind/DBWprocs.c

@@ -546,12 +546,12 @@ DBWloadWindow(window, name, flags)
 	newEditUse = DBCellNewUse(newEditDef, (char *) NULL);
 	(void) StrDup(&(newEditUse->cu_id), "Topmost cell in the window");
 	DBExpand(newEditUse,
-		((DBWclientRec *)window->w_clientData)->dbw_bitmask, TRUE);
+		((DBWclientRec *)window->w_clientData)->dbw_bitmask, DB_EXPAND);
 
 	if (expand)
 	    DBExpandAll(newEditUse, &(newEditUse->cu_bbox),
 			((DBWclientRec *)window->w_clientData)->dbw_bitmask,
-			FALSE, UnexpandFunc,
+			DB_UNEXPAND, UnexpandFunc,
 			INT2CD(((DBWclientRec *)window->w_clientData)->dbw_bitmask));
 
 	if (newEdit)

dbwind/dbwind.h

@@ -152,6 +152,7 @@ extern void DBWAddButtonHandler(const char *name, const cb_database_buttonhandle
                                 int cursor, const char *doc);
 extern char *DBWGetButtonHandler();
 extern char *DBWChangeButtonHandler();
+extern int  DBWButtonHandlerIndex();
 extern void DBWPrintButtonDoc();
 extern void DBWBoxHandler();
 

doc/html/cellname.html

@@ -71,12 +71,15 @@ Operations on cell definitions.
 	   <DT> <B>rename</B> <I>name newname</I>
 	   <DD> Change the name of the cell definition <I>name</I> to 
 		<I>newname</I>.
-	   <DT> <B>delete</B> <I>name</I>
+	   <DT> <B>delete</B> <I>name</I> [<B>-noprompt</B>]
 	   <DD> Delete the cell definition with name <I>name</I>.  If cell
 		<I>name</I> is a descendent of another cell, the command
 		will be prohibited.  If the cell <I>name</I> is currently
 		the topmost cell in the window, the window will be loaded
-		with default cell "(UNNAMED)".
+		with default cell "(UNNAMED)".  If option <B>-noprompt</B>
+		is specified, then the actions specified above happen
+		immediately.  Otherwise, a dialog box will be raised
+		asking for confirmation to delete the cell.
 	   <DT> <B>dereference</B> <I>name</I>
 	   <DD> Perform a flush of the cell (per the "<B>flush</B>" command),
 		first removing any file path associated with the cell, so

doc/html/expand.html

@@ -26,7 +26,8 @@ expanded/unexpanded cells in the current selection.
 
 <H3>Usage:</H3>
    <BLOCKQUOTE>
-      <B>expand</B> [<B>toggle</B>] <BR><BR>
+      <B>expand</B> [<B>selection</B>|<B>surround</B>|<B>overlap</B>|<B>all</B>]
+		[<B>toggle</B>] <BR><BR>
    </BLOCKQUOTE>
 
 <H3>Shortcuts:</H3>
@@ -38,14 +39,32 @@ expanded/unexpanded cells in the current selection.
 <H3>Summary:</H3>
    <BLOCKQUOTE>
       The <B>expand</B> command expands the view of subcells to
-      display the contents of the subcells.  Without arguments,
+      display the contents of the subcells.
-      the <B>expand</B> command expands all unexpanded subcells that
+
-      touch or intersect the cursor box in the layout window. <P>
+      Option <B>overlap</B> expands all unexpanded subcells that
+      overlap with the cursor box in the layout window. <P>
+
+      Option <B>surround</B> expands all unexpanded subcells that
+      are completely surrounded by the cursor box in the layout window. <P>
+
+      Option <B>all</B> expands all subcells in the layout window. <P>
+
+      Option <B>selection</B> operates on the current selection, not
+      relative to the cursor box, expanding all selected cells. <P>
+
+      Option <B>toggle</B> will expand a selected cell that is
+      unexpanded, or unexpand a cell that is already expanded.
+      <B>toggle</B> may be given as an additional option to any
+      of the other options above; however, the <B>toggle</B> option
+      must be the last option given to the command.<P>
+
+      With no arguments, the <B>expand</B> command behaves like
+      <B>expand overlap</B>, and the <B>expand toggle</B> command
+      with no additonal arguments behaves like
+      <B>expand selection toggle</B>, for backwards-compatible
+      behavior with earlier versions of magic which offered only
+      the <B>toggle</B> option.
 
-      Option <B>expand toggle</B> operates on the current selection,
-      not relative to the cursor box, and will expand a selected
-      cell that is unexpanded, or unexpand a cell that is already
-      expanded.
    </BLOCKQUOTE>
 
 <H3>Implementation Notes:</H3>

doc/html/label.html

@@ -87,6 +87,50 @@ Place a label in the layout
       to another layer. <P>
    </BLOCKQUOTE>
 
+   <BLOCKQUOTE>
+      <B>Attribute labels:</B> <P>
+      A handful of labels are referred to as "attribute" labels.  These
+      label types are placed on devices and affect how the device is
+      extracted. <P>
+
+      A label that is placed inside a device (e.g., a MOSFET gate) which
+      ends with the character "<B>^</B>" is a <I>gate attribute</I>.  A
+      gate attribute in the form of "<I>name</I><B>=</B><I>value</I><B>^</B>"
+      specifies an extra parameter to be passed to the device in addition
+      to the standard parameters calculated for that device.  This is used
+      to capture parameters which cannot easily be inferred from the layout.
+      For example, an RF device model might be distinguished from a non-RF
+      device model by a parameter such as <B>rfmode=1</B>.  Whether or not
+      a device is intended for RF use is not easily guessed from the layout,
+      and so "tagging" the gate with the parameter allows the correct model
+      parameters to be used for the device. <P>
+
+      A gate attribute that is not in the form of a parameter will be used
+      as the device's instance index in the netlist;  e.g.,  a label of
+      "<B>1^</B>" on a MOSFET gate extracted as a MOSFET device would be an
+      entry "<B>M1</B>" in the netlist.  This can be used to better track
+      device indexes between a schematic and layout. <P>
+
+      A label that is placed on the <I>edge</I> a device, specificlly  a
+      MOSFET gate, and which ends with the character "<B>$</B>", is a
+      <I>terminal attribute</I>.  The only terminal attributes recognized
+      by magic are <B>S$</B> and <B>D$</B>, which specify which side of the
+      gate is to be considered the source and which is to be considered the
+      drain.  Generally, MOSFET devices are symmetric, and their use in a
+      simulation does not depend on which side is in the position of the
+      "source" and which is in the position of the "drain".  To the extent
+      that it matters, the terminal attributes can be used to ensure that
+      the source and drain connections appear in the netlist in their
+      intended orientation. <P>
+
+      Labels ending with "<B>@</B>" are <I>node attributes</I>.  There is
+      currently no functional application for node attributes.  When one
+      is applied, it will appear in the output netlist in a SPICE comment
+      line indicating the node and attribute.  This could be used, say,
+      by a post-processing script, but as it is in a comment line, it has
+      no impact on simulation or LVS.
+   </BLOCKQUOTE>
+
 <H3>Implementation Notes:</H3>
    <BLOCKQUOTE>
       <B>label</B> is implemented as a built-in command in <B>magic</B>.

doc/html/macro.html

@@ -20,22 +20,64 @@
 
 <H2>macro</H2>
 <HR>
-Define or print a macro called char
+Define or print a key or button macro binding.
 <HR>
 
 <H3>Usage:</H3>
    <BLOCKQUOTE>
-      <B>macro</B> [<I>window_type</I>] [<I>key</I> [<I>value</I>]] <BR><BR>
+      <B>macro</B> [<I>window_type</I>] [<I>option</I>] [<I>key</I> [<I>value</I>]]
+		<BR><BR>
       <BLOCKQUOTE>
 	 where <I>key</I> is the name of a valid key (see below), and
 	 <I>value</I> is a <B>magic</B> command-line command.  If
-	 present, <I>window_type</I> must be one of the four window
+	 present, <I>window_type</I> must be one of the known valid window
-	 types accepted by the <B>specialopen</B> command:  <B>layout</B>,
+	 types accepted by the <B>specialopen</B> command (<B>color</B>,
-	 <B>color</B>, <B>netlist</B>, and <B>wind3d</B>.  If omitted,
+	 <B>netlist</B>, and <B>wind3d</B>), or a known layout tool
-	 the layout window is assumed by default, unless the command has
+	 (<B>box</B>, <B>wiring</B>, <B>nettool</B>, or <B>pick</B>).  If
-	 been called from inside a window (using the colon or semicolon
+	 omitted, the layout window is assumed by default, unless the command
+	 has been called from inside a window (using the colon or semicolon
 	 escape to the command-line), in which case that window type is
-	 assumed.
+	 assumed. <P>
+
+	 In the non-Tcl version of magic, the <I>window_type</I> must be
+	 one of the three valid window types listed above, or <B>layout</B>.
+	 Tool button bindings are hard-coded, fixed, and unknown to the
+	 macro handler. <P>
+
+	 In the Tcl version of magic, tool types are generated by
+	 procedure and can be modified or overridden.  The four tools
+	 listed above are the default tools known to magic.  If no window
+	 or tool type is given, then the current tool in the current
+	 active layout window is assumed.<P>
+
+	 <I>option</I> may be one of the following:
+	 <DL>
+	    <DT> <B>list</B> [<B>-reverse</B>]
+	    <DD> The key bindings are returned in the form of a Tcl list
+		(Tcl version of magic only).  The returned value is a
+		single list with alternating entries of the macro key and
+		the macro binding.  In Tcl, this list can be treated as a
+		dictionary type of key:value pairs.  With the <B>-reverse</B>
+		option, the keys and values are reversed, resulting in a
+		dictionary that can be searched or listed by function.
+	    <DT> <B>help</B>
+	    <DD> Curently, <B>macro help</B> is equivalent to <B>macro</B>
+		 without arguments, and returns a full list of macro names
+		 and their bindings.
+	    <DT> <B>search</B> <I>text</I>
+	    <DD> Return only results which match (all or in part) the string
+		 <I>text</I>.  For example, <B>macro search grid</B> will
+		 return all key bindings that include the command <B>grid</B>.
+	    <DT> <B>copy</B> <I>tool_name</I>
+	    <DD> This is a method introduced to allow the interactive creation
+		 of new tools, in the Tcl version of magic.  Each tool is defined
+		 specifically by its unique button and key bindings.  Because
+		 tools generally keep most of the same default bindings, the
+		 <B>copy</B> option will copy all the existing bindings to the
+		 new tool from the current tool.  This can be followed by
+		 switching to the new tool and replacing macros with ones
+		 unique to the tool.
+	 </DL>
       </BLOCKQUOTE>
    </BLOCKQUOTE>
 
@@ -72,7 +114,6 @@ Define or print a macro called char
       etc., the <B>macro</B> command accepts the abbreviated
       forms <B>Button1</B>, and so forth. <P>
 
-
       Finally, key modifiers may be prepended to the key name.
       Valid key modifiers are <B>Shift_</B>, <B>Control_</B>,
       <B>Alt_</B>, and <B>Meta_</B>, and may be coupled in any
@@ -89,6 +130,7 @@ Define or print a macro called char
 <H3>See Also:</H3>
    <BLOCKQUOTE>
       <A HREF=imacro.html><B>imacro</B></A> <BR>
+      <A HREF=toolchange.html><B>tool</B></A> (Tcl version) <BR>
    </BLOCKQUOTE>
 
 <P><IMG SRC=graphics/line1.gif><P>

doc/html/property.html

@@ -25,7 +25,7 @@ Attach a "property" (string key and value pair) to the edit cell
 
 <H3>Usage:</H3>
    <BLOCKQUOTE>
-      <B>property</B> [<I>type</I>] [<I>key</I> [<I>value</I>]] <BR>
+      <B>property</B> [<I>list</I>] [<I>type</I>] [<I>key</I> [<I>value</I>]] <BR>
 	or
       <B>property</B> [<B>compat</B>] [<B>true</B>|<B>false</B>] <BR><BR>
       <BLOCKQUOTE>
@@ -64,6 +64,13 @@ Attach a "property" (string key and value pair) to the edit cell
       .mag file.  However, if the user wants to create a property that
       is handled differently than a string (namely, to be a dimensional
       value that scales), then comptability mode should be turned off. <P>
+
+      If the argument <I>list</I> is given as the first argument, and
+      <I>value</I> is not present, then if the property <I>key</I>
+      does not exist, then the command will return a NULL object to the
+      interpreter instead of printing an error message.  This is the
+      "quiet" version of the command preferred for scripts that want to
+      query whether or not a specific property exists.
    </BLOCKQUOTE>
 
    <BLOCKQUOTE>

doc/html/unexpand.html

@@ -25,7 +25,8 @@ Unexpand everything inside or touching the cursor box.
 
 <H3>Usage:</H3>
    <BLOCKQUOTE>
-      <B>unexpand</B> <BR><BR>
+      <B>unexpand</B> [<B>selection</B>|<B>surround</B>|<B>overlap</B>|<B>all</B>]
+		<BR><BR>
    </BLOCKQUOTE>
 
 <H3>Shortcuts:</H3>
@@ -37,8 +38,23 @@ Unexpand everything inside or touching the cursor box.
    <BLOCKQUOTE>
       The <B>unexpand</B> command unexpands the view of subcells to
       hide the contents of the subcells and show the bounding box
-      outline only.  The <B>unexpand</B> command unexpands all subcells
+      outline only.
-      that touch or intersect the cursor box in the layout window. <P>
+
+      Option <B>overlap</B> unexpands all expanded subcells that
+      overlap with the cursor box in the layout window. <P>
+
+      Option <B>surround</B> unexpands all expanded subcells that
+      are completely surrounded by the cursor box in the layout window. <P>
+
+      Option <B>all</B> unexpands all subcells in the layout window. <P>
+
+      Option <B>selection</B> operates on the current selection, not
+      relative to the cursor box, unexpanding all selected cells. <P>
+
+      With no arguments, the <B>unexpand</B> command behaves like
+      <B>unexpand surround</B>, for backwards-compatible behavior with
+      earlier versions of magic which did not offer the options.
+
    </BLOCKQUOTE>
 
 <H3>Implementation Notes:</H3>

drc/DRCbasic.c

@@ -501,9 +501,22 @@ DRCBasicCheck (celldef, checkRect, clipRect, function, cdata)
 
 #ifdef MAGIC_WRAPPER
 	/* Execute pending Tcl events, so the DRC process doesn't block.    */
+
+	/* WARNING:  This code cannot be enabled until some method is
+	 * worked out to determine if any event resulted in a change
+	 * to the DRC check plane which would invalidate the current
+	 * search.  If so, the search must end immediately and the
+	 * area being checked must be reinstated.  The code was added
+	 * to see how it speeds up the response time of magic when
+	 * some of the DRC rules are compute-intensive.  It speeds up
+	 * performance enough that it is worthwhile to implement the
+	 * method just mentioned.
+	 */
+	#if 0
 	UndoEnable();
 	while (Tcl_DoOneEvent(TCL_DONT_WAIT));
 	UndoDisable();
+	#endif
 #endif
     }
     drcCifCheck(&arg);
@@ -765,13 +778,12 @@ drcTile (tile, dinfo, arg)
 			cptr = cptr->drcc_next)
 	    {
 		/* Handle rule exceptions and exemptions */
-		if (cptr->drcc_exception != (char)DRC_EXCEPTION_NONE)
+		if (cptr->drcc_exception != DRC_EXCEPTION_NONE)
 		{
 		    PropertyRecord *proprec;
 		    bool propfound, isinside = FALSE;
 		    char *name;
-		    char idx = cptr->drcc_exception;
+		    int idx = cptr->drcc_exception & ~DRC_EXCEPTION_MASK;
-		    if (idx < 0) idx = -idx - 1;
 		    name = DRCCurStyle->DRCExceptionList[idx];
 
 		    /* Is there any exception area defined? */
@@ -797,8 +809,10 @@ drcTile (tile, dinfo, arg)
 		     * an exception area.  Exception rules are ignored if
 		     * the edge is outside an exception area.
 		     */
-		    if (!isinside && (cptr->drcc_exception >= 0)) continue;
+		    if (!isinside && (!(cptr->drcc_exception & DRC_EXCEPTION_MASK) == 0))
-		    if (isinside && (cptr->drcc_exception < 0)) continue;
+			continue;
+		    if (isinside && ((cptr->drcc_exception & DRC_EXCEPTION_MASK) != 0))
+			continue;
 		}
 
 	    	/* DRC_ANGLES_90 and DRC_SPLITTILE rules are handled by	*/
@@ -1211,24 +1225,17 @@ drcTile (tile, dinfo, arg)
 				cptr = cptr->drcc_next)
 	    {
 		/* Handle rule exceptions and exemptions */
-		if (cptr->drcc_exception != (char)DRC_EXCEPTION_NONE)
+		if (cptr->drcc_exception != DRC_EXCEPTION_NONE)
 		{
 		    PropertyRecord *proprec;
 		    bool propfound, isinside = FALSE;
 		    char *name;
-		    char idx = cptr->drcc_exception;
+		    int idx = cptr->drcc_exception & ~DRC_EXCEPTION_MASK;
-		    if (idx < 0) idx = -idx - 1;
 		    name = DRCCurStyle->DRCExceptionList[idx];
 
 		    /* Is there any exception area defined? */
 		    proprec = DBPropGet(arg->dCD_celldef, name, &propfound);
 
-		    /* Quickest case:  Rule is an exception but there are no
-		     * exception areas.
-		     */
-		    if ((!propfound) && (cptr->drcc_exception >= 0))
-			continue;
-
 		    /* If an exception area exists, is the error edge inside? */
 		    if (propfound)
 		    {
@@ -1249,8 +1256,10 @@ drcTile (tile, dinfo, arg)
 		     * an exception area.  Exception rules are ignored if
 		     * the edge is outside an exception area.
 		     */
-		    if (isinside && (cptr->drcc_exception < 0)) continue;
+		    if (!isinside && ((cptr->drcc_exception & DRC_EXCEPTION_MASK) == 0))
-		    if (!isinside && (cptr->drcc_exception >= 0)) continue;
+			continue;
+		    if (isinside && ((cptr->drcc_exception & DRC_EXCEPTION_MASK) != 0))
+			continue;
 		}
 
 	    	/* DRC_ANGLES_90 and DRC_SPLITTILE rules are handled by	*/

drc/DRCtech.c

@@ -76,7 +76,7 @@ static int DRCtag = 0;
  * while reading the DRC tech file section.
  */
 
-static char drcCurException = (char)DRC_EXCEPTION_NONE;
+static unsigned char drcCurException = DRC_EXCEPTION_NONE;
 
 /*
  * Forward declarations.
@@ -405,7 +405,9 @@ drcWhyCreate(whystring)
  * not already exist.
  *
  * Results:
- *	The index of the exception (which is a signed character).
+ *	The index of the exception (which is an unsigned character containing
+ *	the index in the lower 7 bits and a high bit indicating if the rule
+ *	is an exception (0) or an exemption (1)).
  *
  * Side effects:
  *	Adds to the DRCExceptionList if "name" has not been used before.
@@ -414,7 +416,7 @@ drcWhyCreate(whystring)
  * ----------------------------------------------------------------------------
  */
 
-char
+unsigned char
 drcExceptionCreate(name)
     char *name;
 {
@@ -424,13 +426,14 @@ drcExceptionCreate(name)
     /* NOTE:  DRCExceptionList has "MASKHINTS_" prepended to the names */
     for (i = 0; i < DRCCurStyle->DRCExceptionSize; i++)
 	if (!strcmp(name, DRCCurStyle->DRCExceptionList[i] + 10))
-	    return (char)i;
+	    return (unsigned char)i;
 
-    if (i > 127)
+    /* Note that i cannot be 127 as this is reserved for DRC_EXCEPTION_NONE */
+    if (i > 126)
     {
 	/* I would be shocked if this code ever got executed. */
-	TxError("Error:  Too many rule exceptions!  Limit is 127.\n");
+	TxError("Error:  Too many rule exceptions!  Limit is 126.\n");
-	return (char)DRC_EXCEPTION_NONE;
+	return DRC_EXCEPTION_NONE;
     }
 
     /* Create a new list that is one entry longer than the old list.
@@ -448,7 +451,7 @@ drcExceptionCreate(name)
     if (DRCCurStyle->DRCExceptionList != (char **)NULL)
 	freeMagic(DRCCurStyle->DRCExceptionList);
     DRCCurStyle->DRCExceptionList = newlist;
-    return (char)i;
+    return (unsigned char)i;
 }
     
 /*
@@ -732,7 +735,7 @@ DRCTechStyleInit()
 	    }
 
     drcCifInit();
-    drcCurException = (char)DRC_EXCEPTION_NONE;
+    drcCurException = DRC_EXCEPTION_NONE;
 }
 
 /*
@@ -3726,9 +3729,10 @@ drcRectangle(argc, argv)
  *	Returns 0.
  *
  * Side effects:
- *	Updates drcCurException.  drcCurException is zero or positive for 
+ *	Updates drcCurException.  drcCurException contains the index in
- *	exceptions and negative for exemptions.  The index can be
+ *	the lower 7 bits, and a flag in the upper bit (0 = exception rule,
- *	recovered from a negative value by negating it and subtracting 1.
+ *	1 = exemption rule).  The index can be recovered by masking off
+ *	the upper bit.
  *
  * ----------------------------------------------------------------------------
  */
@@ -3745,7 +3749,7 @@ drcException(argc, argv)
     /* Assume that argc must be 2 because the parser insists upon it */
 
     if (!strcmp(argv[1], "none"))
-	drcCurException = (char)DRC_EXCEPTION_NONE;
+	drcCurException = DRC_EXCEPTION_NONE;
     else
 	drcCurException = drcExceptionCreate(argv[1]);
     return (0);
@@ -3763,9 +3767,9 @@ drcExemption(argc, argv)
     /* Assume that argc must be 2 because the parser insists upon it */
 
     if (!strcmp(argv[1], "none"))
-	drcCurException = (char)DRC_EXCEPTION_NONE;
+	drcCurException = DRC_EXCEPTION_NONE;
     else
-	drcCurException = -(drcExceptionCreate(argv[1])) - 1;
+	drcCurException = drcExceptionCreate(argv[1]) | DRC_EXCEPTION_MASK;
     return (0);
 }
 

drc/drc.h

@@ -36,7 +36,7 @@ typedef struct drccookie
     TileTypeBitMask   drcc_mask;	/* Legal types on RHS */
     TileTypeBitMask   drcc_corner;	/* Types that trigger corner check */
     unsigned short    drcc_flags;	/* Miscellaneous flags, see below. */
-    char    	      drcc_exception;	/* Index to list of exceptions */
+    unsigned char     drcc_exception;	/* Index to list of exceptions */
     int		      drcc_edgeplane;	/* Plane of edge */
     int		      drcc_plane;	/* Index of plane on which to check
 					 * legal types. */
@@ -92,8 +92,10 @@ typedef struct drccookie
 #define DRC_UNPROCESSED 		CLIENTDEFAULT
 #define DRC_PROCESSED 			1
 
-/* drcc_exception defaults to -128 (0x80) meaning no exceptions/exemptions */
+/* drcc_exception defaults to 255 meaning no exceptions/exemptions */
-#define	DRC_EXCEPTION_NONE (char)0x80
+#define	DRC_EXCEPTION_NONE ((unsigned char)0xff)
+/* The high bit of the value determines if this is an exception or an exemption. */
+#define DRC_EXCEPTION_MASK ((unsigned char)0x80)
 
 /*
  * Background DRC (DRC Idle proc) for Tcl-based Magic

ext2spice/ext2hier.c

@@ -1088,6 +1088,7 @@ spcdevHierVisit(
 
 	    if (!has_model)
 	    {
+		fprintf(esSpiceF, " ");
 		esSIvalue(esSpiceF, 1.0E-15 * (double)sdM * (double)dev->dev_cap);
 		spcHierWriteParams(hc, dev, scale, l, w, sdM, FALSE);
 	    }
@@ -1138,6 +1139,7 @@ spcdevHierVisit(
 
 	    if (!has_model)
 	    {
+		fprintf(esSpiceF, " ");
 		esSIvalue(esSpiceF, 1.0E-15 * (double)sdM * (double)dev->dev_cap);
 		spcHierWriteParams(hc, dev, scale, l, w, sdM, FALSE);
 	    }

ext2spice/ext2spice.c

@@ -3140,6 +3140,7 @@ spcdevVisit(
 
 	    if (!has_model)
 	    {
+		fprintf(esSpiceF, " ");
 		esSIvalue(esSpiceF, 1.0E-15 * (double)sdM * (double)dev->dev_cap);
 		spcWriteParams(dev, hierName, scale, l, w, sdM, FALSE);
 	    }
@@ -3186,6 +3187,7 @@ spcdevVisit(
 
 	    if (!has_model)
 	    {
+		fprintf(esSpiceF, " ");
 		esSIvalue(esSpiceF, 1.0E-15 * (double)sdM * (double)dev->dev_cap);
 		spcWriteParams(dev, hierName, scale, l, w, sdM, FALSE);
 	    }

extract/ExtBasic.c

@@ -1835,6 +1835,8 @@ extOutputDevParams(reg, devptr, outFile, length, width, areavec, perimvec)
     ParamList *chkParam;
     HashEntry *he;
     ResValue resvalue;
+    LabRegion *node;	/* Node connected to gate terminal */
+    LabelList *ll;	/* Gate's label list */
 
     for (chkParam = devptr->exts_deviceParams; chkParam
 		!= NULL; chkParam = chkParam->pl_next)
@@ -1966,6 +1968,34 @@ extOutputDevParams(reg, devptr, outFile, length, width, areavec, perimvec)
 		break;
 	}
     }
+
+    /* If there are device attribute labels (labels attached to the device
+     * type ending with "^") with "=" in them, then treat them as extra
+     * parameters.  Output each one and remove the gate attribute property
+     * from the label.
+     */
+
+    node = (LabRegion *)ExtGetRegion(reg->treg_tile, reg->treg_dinfo);
+    for (ll = node->lreg_labels; ll; ll = ll->ll_next)
+    {
+	if (ll->ll_attr == LL_GATEATTR)
+	{
+	    char cs, *ct, *cp = ll->ll_label->lab_text;
+	    if (strchr(cp, '=') != NULL)
+	    {
+		/* Since this is an attribute label, it has a special character
+		 * at the end, which needs to be stripped off while printing
+		 * and then put back again.
+		 */
+		ct = ll->ll_label->lab_text + strlen(ll->ll_label->lab_text) - 1;
+		cs = *ct;
+		*ct = '\0';
+		fprintf(outFile, " %s", ll->ll_label->lab_text);
+		ll->ll_attr = LL_NOATTR;
+		*ct = cs;
+	    }
+	}
+    }
 }
 
 /* Structures used by extTermAPFunc() for storing area and perimeter data */
@@ -2725,6 +2755,56 @@ extOutputDevices(def, transList, outFile)
 			/* get corrected by extComputeEffectiveLW().	*/
 			length = (extTransRec.tr_gatelen - width) / 2;
 		    }
+
+		    if ((n == 1) && (length == 0) && (extTransRec.tr_gatelen == 0))
+		    {
+			/* If a one-terminal device has not recorded any
+			 * gate length, then get W and L from the bounding
+			 * box of the device.  This routine could be much
+			 * better optimized but it is probably not worth
+			 * the effort.  Just reusing the code from above
+			 * for creating extSpecialDevice, a list of device
+			 * tiles.  Note that W and L are not distinguishable
+			 * and hopefully the PDK defines the device by area
+			 * and perimeter.
+			 */
+			LinkedTile *lt;
+			Rect devbbox, ltbox;
+
+			extSpecialDevice = (LinkedTile *)NULL;
+
+			arg.fra_uninit = (ClientData)extTransRec.tr_gatenode;
+			arg.fra_region = (ExtRegion *)reg;
+			arg.fra_each = extSDTileFunc;
+			ExtFindNeighbors(reg->treg_tile, reg->treg_dinfo,
+					arg.fra_pNum, &arg);
+
+			arg.fra_uninit = (ClientData) reg;
+			arg.fra_region = (ExtRegion *) extTransRec.tr_gatenode;
+			arg.fra_each = (int (*)()) NULL;
+			ExtFindNeighbors(reg->treg_tile, reg->treg_dinfo,
+					arg.fra_pNum, &arg);
+
+			lt = extSpecialDevice;
+			if (lt)
+			{
+			    TiToRect(lt->t, &devbbox);
+			    for (; lt; lt = lt->t_next)
+			    {
+				TiToRect(lt->t, &ltbox);
+				GeoInclude(&ltbox, &devbbox);
+			    }
+			    free_magic1_t mm1 = freeMagic1_init();
+			    for (lt = extSpecialDevice; lt; lt = lt->t_next)
+				freeMagic1(&mm1, (char *)lt);
+			    freeMagic1_end(&mm1);
+			}
+			length = devbbox.r_xtop - devbbox.r_xbot;
+			/* Width was likely a perimeter value and will
+			 * be recalculated as the actual device width.
+			 */
+			width = devbbox.r_ytop - devbbox.r_ybot;
+		    }
 		}
 
 		/*------------------------------------------------------*/

extract/ExtHier.c

@@ -354,8 +354,8 @@ extHierConnections(ha, cumFlat, oneFlat)
 	if (!(lab->lab_flags & LABEL_STICKY)) continue;
 
 	r = lab->lab_rect;
+	if (!GEO_TOUCH(&r, &ha->ha_subArea)) continue;
 	GEOCLIP(&r, &ha->ha_subArea);
-	if (GEO_RECTNULL(&r)) continue;
 
 	cumDef = cumFlat->et_use->cu_def;
 	connected = &DBConnectTbl[lab->lab_type];

extract/ExtNghbors.c

@@ -614,6 +614,7 @@ termtop:
 
 termdone:
 	/* (continue) */
+	(void)0; /* older compilers need a statement after the label to prevent a compile error */
     }
     
     /* Clean up---Put the ClientData entries in the tiles back to

extract/ExtSubtree.c

@@ -251,6 +251,17 @@ extSubtree(parentUse, reg, f)
 			if (result == 0) {
 			    /* If result == FALSE then ha.ha_interArea is invalid. */
 			    ha.ha_interArea = rlab;
+			    /* Ensure that the interaction area is not zero */
+			    if (ha.ha_interArea.r_xtop - ha.ha_interArea.r_xbot == 0)
+			    {
+				ha.ha_interArea.r_xtop++;
+				ha.ha_interArea.r_xbot--;
+			    }
+			    if (ha.ha_interArea.r_ytop - ha.ha_interArea.r_ybot == 0)
+			    {
+				ha.ha_interArea.r_ytop++;
+				ha.ha_interArea.r_ybot--;
+			    }
 			    result = 1;
 			}
 			else
@@ -779,6 +790,7 @@ extSubtreeFunc(scx, ha)
      */
     ha->ha_subArea = use->cu_bbox;
     GEOCLIP(&ha->ha_subArea, &ha->ha_interArea);
+
     hy.hy_area = &ha->ha_subArea;
     hy.hy_target = oneFlat->et_use;
     hy.hy_prefix = TRUE;

graphics/grMain.c

@@ -63,7 +63,6 @@ static char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magic-8.0/
 #include <unistd.h>
 
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "utils/hash.h"

graphics/grNull.c

@@ -20,7 +20,6 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "utils/magsgtty.h"
 #include "utils/magic.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"

graphics/grOGL1.c

@@ -17,7 +17,6 @@
 #include <signal.h>
 
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "utils/geometry.h"
 #include "graphics/graphics.h"
 #include "windows/windows.h"

graphics/grOGL4.c

@@ -22,7 +22,6 @@
 #include <X11/Xlib.h>
 
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "graphics/graphics.h"

graphics/grTCairo1.c

@@ -28,7 +28,6 @@
 #include "utils/main.h"
 #include "utils/magic.h"
 #include "utils/malloc.h"
-#include "utils/magsgtty.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"
 #include "graphics/graphics.h"

graphics/grTCairo4.c

@@ -15,7 +15,6 @@
 
 #include "tcltk/tclmagic.h"
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"

graphics/grTOGL1.c

@@ -26,7 +26,6 @@
 #include "utils/main.h"
 #include "utils/magic.h"
 #include "utils/malloc.h"
-#include "utils/magsgtty.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"
 #include "graphics/graphics.h"

graphics/grTOGL4.c

@@ -13,7 +13,6 @@
 
 #include "tcltk/tclmagic.h"
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"

graphics/grTk1.c

@@ -23,7 +23,6 @@
 #include "utils/main.h"
 #include "utils/magic.h"
 #include "utils/malloc.h"
-#include "utils/magsgtty.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"
 #include "graphics/graphics.h"

graphics/grTk4.c

@@ -13,7 +13,6 @@
 
 #include "tcltk/tclmagic.h"
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "windows/windows.h"

graphics/grX11su1.c

@@ -31,7 +31,6 @@
 #include <X11/Xutil.h>
 
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "textio/txcommands.h"

graphics/grX11su4.c

@@ -22,7 +22,6 @@
 #include <X11/Xlib.h>
 
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "graphics/graphics.h"

resis/ResRex.c

@@ -1356,7 +1356,7 @@ ResFixUpConnections(extDev, layoutDev, extNode, nodename)
     }
     if (extDev->subs == extNode)
     {
-	if ((subs = layoutDev->rd_fet_subs) != NULL)
+	if ((layoutDev->rd_nterms >= 4) && ((subs = layoutDev->rd_fet_subs) != NULL))
 	{
 	    if (subs->rn_name != NULL && notdecremented)
 	    {

resis/ResSimple.c

@@ -386,7 +386,7 @@ ResMoveDevices(node1, node2)
 	devptr = devptr->te_nextt;
 	if (device->rd_fet_gate == node1)
    	    device->rd_fet_gate = node2;
-	else if (device->rd_fet_subs == node1)
+	else if ((device->rd_nterms >= 4) && (device->rd_fet_subs == node1))
    	    device->rd_fet_subs = node2;
 	else if (device->rd_fet_source == node1)
 	    device->rd_fet_source = node2;

select/selOps.c

@@ -1216,13 +1216,21 @@ SelectTransform(transform)
     SelectAndCopy2(EditRootDef);
 }
 
+/* Client data used by SelectExpand */
+
+typedef struct selExpData {
+    int sed_mask;	/* window mask */
+    int sed_type;	/* DB_EXPAND, etc. */
+    Rect *sed_box;	/* selection box if used, or NULL */
+} SelExpData;
+
 /*
  * ----------------------------------------------------------------------------
  *
  * SelectExpand --
  *
- * 	Expand all of the selected cells that are unexpanded, and
+ * 	Expand or unexpand all of the selected cells according to
- *	unexpand all of those that are expanded.
+ *	expandType.
  *
  * Results:
  *	None.
@@ -1230,58 +1238,166 @@ SelectTransform(transform)
  * Side effects:
  *	The contents of the selected cells will become visible or
  *	invisible on the display in the indicated window(s).
+ *	Both the cell in the layout and the selection are updated
+ *	so that they are synchonized with respect to the state of
+ *	visibility.
  *
  * ----------------------------------------------------------------------------
  */
 
 void
-SelectExpand(mask)
+SelectExpand(mask, expandType, rootBox)
     int mask;			/* Bits of this word indicate which
 				 * windows the selected cells will be
 				 * expanded in.
 				 */
+    int expandType;		/* Operation to perform:  Expand,
+				 * unexpand, or expand toggle.
+				 */
+    Rect *rootBox;		/* Area of root box, if selecting by
+				 * cursor box area.
+				 */
 {
-    extern int selExpandFunc();	/* Forward reference. */
+    /* Forward references */
+    extern int selExpandFunc();
 
-    (void) SelEnumCells(FALSE, (bool *) NULL, (SearchContext *) NULL,
+    SelExpData sed;
-	    selExpandFunc, INT2CD(mask));
+
+    sed.sed_type = expandType;
+    sed.sed_box = rootBox;
+    sed.sed_mask = mask;
+
+    if (rootBox != NULL)
+    {
+	SearchContext scx;
+
+	scx.scx_use = SelectUse;
+	scx.scx_area = *rootBox;
+	scx.scx_trans = GeoIdentityTransform;
+
+	SelEnumCells(FALSE, (bool *) NULL, &scx, selExpandFunc, &sed);
+	return;
+    }
+
+    SelEnumCells(FALSE, (bool *) NULL, (SearchContext *)NULL,
+	    	selExpandFunc, &sed);
 }
 
     /* ARGSUSED */
 int
-selExpandFunc(selUse, use, transform, mask)
+selExpandFunc(selUse, use, transform, sed)
     CellUse *selUse;		/* Use from selection. */
     CellUse *use;		/* Use to expand (in actual layout). */
     Transform *transform;	/* Not used. */
-    int mask;			/* Windows in which to expand. */
+    SelExpData *sed;		/* Information for expansion */
 {
-    /* Don't change expansion status of root cell:  screws up
+    int expandType = sed->sed_type;
-     * DBWAreaChanged (need to always have at least top-level
+    int mask = sed->sed_mask;
-     * cell be expanded).
+    Rect *rootBox = sed->sed_box;
-     */
 
-    if (use->cu_parent == NULL)
+    /* If a rootBox is provided, then we are here trying to sync the
+     * cells in the selection to those in the edit cell.  Need to
+     * follow the policy of expandType:  If DB_EXPAND_SURROUND, then
+     * selUse must be inside the rootBox.  If DB_EXPAND_OVERLAP, then
+     * selUse must ovelap the rootBox.
+     */
+    if (rootBox != NULL)
     {
-	TxError("Can't unexpand root cell of window.\n");
+	if ((expandType & DB_EXPAND_SURROUND_MASK) == DB_EXPAND_OVERLAP)
-	return 0;
+	{
+	    if (!GEO_OVERLAP(rootBox, &selUse->cu_bbox))
+		return 0;
+	}
+	else /* (expandType & DB_EXPAND_SURROUND_MASK) == DB_EXPAND_SURROUND */
+	{
+	    if (!GEO_SURROUND(rootBox, &selUse->cu_bbox))
+		return 0;
+	}
     }
 
-    /* Be sure to modify the expansion bit in the selection as well as
+    /* If a rootBox was given, then the expansion is being done in the
-     * the one in the layout in order to keep them consistent.
+     * edit cell, and the selection is being updated to reflect any
+     * changes there, so only handle the selection.  Otherwise, we
+     * have to sync the corresponding cells in the edit def here.
      */
-
+    if ((expandType & DB_EXPAND_MASK) == DB_EXPAND)
-    if (DBDescendSubcell(use, mask))
     {
-	DBExpand(selUse, mask, FALSE);
+	/* Be sure to modify the expansion bit in the selection as well as
-	DBExpand(use, mask, FALSE);
+	 * the one in the layout in order to keep them consistent.
-	DBWAreaChanged(use->cu_parent, &use->cu_bbox, mask,
+	 */
-	    (TileTypeBitMask *) NULL);
+	DBExpand(selUse, mask, DB_EXPAND);
+	if (!rootBox)
+	{
+	    DBExpand(use, mask, DB_EXPAND);
+	    if (use->cu_parent == NULL)
+		DBWAreaChanged(use->cu_def, &use->cu_bbox, mask, &DBAllButSpaceBits);
+	    else 
+		DBWAreaChanged(use->cu_parent, &use->cu_bbox, mask, &DBAllButSpaceBits);
+	}
     }
-    else
+    else if ((expandType & DB_EXPAND_MASK) == DB_UNEXPAND)
     {
-	DBExpand(selUse, mask, TRUE);
+	/* Don't change expansion status of root cell:  screws up
-	DBExpand(use, mask, TRUE);
+	 * DBWAreaChanged (need to always have at least top-level
-	DBWAreaChanged(use->cu_parent, &use->cu_bbox, mask, &DBAllButSpaceBits);
+	 * cell be expanded).
+	 */
+
+	if ((use->cu_parent == NULL) && !rootBox)
+	{
+	    TxError("Can't unexpand root cell of window.\n");
+	    return 0;
+	}
+
+	if (use->cu_parent != NULL)
+	{
+	    /* Be sure to modify the expansion bit in the selection as well as
+	     * the one in the layout in order to keep them consistent.
+	     */
+	    DBExpand(selUse, mask, DB_UNEXPAND);
+	    if (!rootBox)
+	    {
+		DBExpand(use, mask, DB_UNEXPAND);
+		DBWAreaChanged(use->cu_parent, &use->cu_bbox, mask,
+			(TileTypeBitMask *) NULL);
+	    }
+	}
+    }
+    else	/* (expandType & DB_EXPAND_MASK) == DB_EXPAND_TOGGLE */
+    {
+	/* Don't change expansion status of root cell:  screws up
+	 * DBWAreaChanged (need to always have at least top-level
+	 * cell be expanded).
+	 */
+
+	if (use->cu_parent == NULL)
+	{
+	    if (!rootBox) TxError("Can't unexpand root cell of window.\n");
+	    return 0;
+	}
+
+	/* Be sure to modify the expansion bit in the selection as well as
+	 * the one in the layout in order to keep them consistent.
+	 */
+
+	if (DBDescendSubcell(selUse, mask))
+	{
+	    DBExpand(selUse, mask, DB_UNEXPAND);
+	    if (!rootBox)
+	    {
+		DBExpand(use, mask, DB_UNEXPAND);
+		DBWAreaChanged(use->cu_parent, &use->cu_bbox, mask,
+			(TileTypeBitMask *) NULL);
+	    }
+	}
+	else
+	{
+	    DBExpand(selUse, mask, DB_EXPAND);
+	    if (!rootBox)
+	    {
+		DBExpand(use, mask, DB_EXPAND);
+		DBWAreaChanged(use->cu_parent, &use->cu_bbox, mask, &DBAllButSpaceBits);
+	    }
+	}
     }
     return 0;
 }

tcltk/texthelper.tcl

@@ -148,6 +148,10 @@ proc magic::make_texthelper { mgrpath } {
 proc magic::analyze_labels {} {
    global typedflt typesticky typeport
 
+   # Ensure units of microns
+   set curunits [units]
+   units microns
+
    # Pick up values from the first entry returned
 
    set tval [lindex [setlabel text] 0]
@@ -157,6 +161,7 @@ proc magic::analyze_labels {} {
    set oval [lindex [setlabel offset] 0]
    set lval [lindex [setlabel layer] 0]
    set kval [lindex [setlabel sticky] 0]
+   set sval [lindex [setlabel size] 0]
    set isport [lindex [port exists] 0]
    if {$isport} {
        set pval [lindex [port index] 0]
@@ -164,14 +169,6 @@ proc magic::analyze_labels {} {
        set pval -1
    }
 
-   # Rescale internal units to microns
-   set sval [lindex [setlabel size] 0]
-   set sscale [cif scale out]
-   set tmp_pre $::tcl_precision
-   set ::tcl_precision 3
-   set sval [expr $sscale * $sval]
-   set ::tcl_precision $tmp_pre
-
    .texthelper.text.tent delete 0 end
    .texthelper.text.tent insert 0 $tval
    set jbtn [string map {NORTH N WEST W SOUTH S EAST E CENTER center} $jval]
@@ -206,6 +203,9 @@ proc magic::analyze_labels {} {
        pack .texthelper.layer.tent -side left -fill x -expand true
        pack .texthelper.layer.btn2 -side left
    }
+
+   # Revert units
+   units {*}$curunits
 }
 
 
@@ -220,6 +220,9 @@ proc magic::change_label {} {
       return
    }
 
+   set curunits [units]
+   units microns
+
    set ltext [.texthelper.text.tent get]
    set lfont [.texthelper.font.btn cget -text]
    set lsize [.texthelper.size.tent get]
@@ -247,13 +250,10 @@ proc magic::change_label {} {
       }
    }
    if {$lsize != ""} {
-      setlabel size ${lsize}um
+      setlabel size $lsize
    }
    if {$loff != ""} {
-      set oldunits [units]
-      units internal
       setlabel offset [join $loff]
-      units $oldunits
    }
    if {$lrot != ""} {
       setlabel rotate $lrot
@@ -274,6 +274,8 @@ proc magic::change_label {} {
          port remove
       }
    }
+  
+   units {*}$curunits
 }
 
 proc magic::make_new_label {} {

tcltk/toolkit.tcl

@@ -12,6 +12,13 @@
 # Added spice-to-layout procedure
 # March 4, 2026
 # Changed to make use of new "units" command
+# March 26, 2026
+# Added behavior to handle ideal devices (resistor, capacitor,
+# inductor)
+# April 2, 2026
+# Changed the hash to MurmurHash3, as the existing hash
+# is prone to creating name collisions (rare, but not rare
+# enough).
 #--------------------------------------------------------------
 # Sets up the environment for a toolkit.  The toolkit must
 # supply a namespace that is the "library name".  For each
@@ -202,7 +209,7 @@ proc magic::generate_layout_add {subname subpins complist library} {
 		    select cell $inst
 		    delete
 		}
-		cellname delete $child
+		cellname delete $child -noprompt
 	    }
 	}
     }
@@ -281,8 +288,13 @@ proc magic::generate_layout_add {subname subpins complist library} {
 	set paramlist {}
 
 	# NOTE:  This routine deals with subcircuit calls and devices
-	# with models.  It needs to determine when a device is instantiated
+	# with models.  There are two exceptions, for toolkits which
-	# without a model, and ignore such devices.
+	# wish to implement a way to generate unmodeled capacitors,
+	# resistors, or inductors based on value;  for example, metal
+	# interdigitated capacitors.  For those exceptions, the device
+	# value is recast as a parameter called "value", and the device
+	# is given a model "capacitor", "resistor", or "inductor",
+	# respectively.
 
 	# Parse SPICE line into pins, device name, and parameters.  Make
 	# sure parameters incorporate quoted expressions as {} or ''.
@@ -326,6 +338,23 @@ proc magic::generate_layout_add {subname subpins complist library} {
 	set devtype [lindex $pinlist end]
 	set pinlist [lrange $pinlist 0 end-1]
 
+	# Ideal device check:  "devtype" will start with a digit.
+	# The instname will begin with "c", "r", or "l".
+
+	if {[regexp {^([0-9\.]+.*)} $devtype pval]} {
+	    set comptype [string tolower [string range $instname 0 0]]
+	    if {$comptype == "c"} {
+		lappend paramlist [list value $pval]
+		set devtype capacitor
+	    } elseif {$comptype == "r"} {
+		lappend paramlist [list value $pval]
+		set devtype resistor
+	    } elseif {$comptype == "l"} {
+		lappend paramlist [list value $pval]
+		set devtype inductor
+	    }
+	}
+
 	set mult 1
 	foreach param $paramlist {
 	    set parmname [lindex $param 0]
@@ -337,6 +366,27 @@ proc magic::generate_layout_add {subname subpins complist library} {
 	    }
 	}
 
+	# Check if devtype has routines by looking for ${devtype}_defaults.
+	# If not found, do a case-insensitive check against all devices
+	# before deciding that devtype is a subcircuit and not a device.
+	# If found by case-insensitive check, then change the device name
+	# to the one used in the library.
+
+	if {$library != ""} {
+	    set alldevices [namespace eval ::${library} {info procs}]
+	} else {
+	    set alldevices [namespace eval ::${PDKNAMESPACE} {info procs}]
+	}
+	set devdefault [lsearch $alldevices ${devtype}_defaults]
+	if {$devdefault == -1} {
+	    set devdefault [lsearch -nocase $alldevices ${devtype}_defaults]
+	    if {$devdefault != -1} {
+		set devprocname [lindex $alldevices $devdefault]
+		set devproclist [split $devprocname "_"]
+		set devtype [lindex $devproclist 0]
+	    }
+	}
+
         # devtype is assumed to be in library.  If not, it will attempt to
 	# use 'getcell' on devtype.  Note that this code depends on the
 	# PDK setting varible PDKNAMESPACE.
@@ -500,7 +550,7 @@ proc magic::netlist_to_layout {netfile library} {
 	    set subname [lindex $ftokens 1]
 	    set subpins [lrange $ftokens 2 end]
 	    set insub true
-         } elseif {[regexp -nocase {^[xmcrdq]([^ \t]+)[ \t](.*)$} $line \
+         } elseif {[regexp -nocase {^[xmcrldq]([^ \t]+)[ \t](.*)$} $line \
 		    valid instname rest]} {
 	    lappend toplist $line
          } elseif {[regexp -nocase {^[ivbe]([^ \t]+)[ \t](.*)$} $line \
@@ -515,7 +565,7 @@ proc magic::netlist_to_layout {netfile library} {
 	    set subname ""
 	    set subpins ""
 	    set complist {}
-         } elseif {[regexp -nocase {^[xmcrdq]([^ \t]+)[ \t](.*)$} $line \
+         } elseif {[regexp -nocase {^[xmcrldq]([^ \t]+)[ \t](.*)$} $line \
 		    valid instname rest]} {
 	    lappend complist $line
          } elseif {[regexp -nocase {^[ivbe]([^ \t]+)[ \t](.*)$} $line \
@@ -798,11 +848,16 @@ proc magic::gencell_change {instname gencell_type library parameters} {
 	set pdefaults [${library}::${gencell_type}_defaults]
         # Pull user-entered values from dialog
         set parameters [dict merge $pdefaults [magic::gencell_getparams]]
-	set newinstname [.params.title.ient get]
-	if {$newinstname == "(default)"} {set newinstname $instname}
-	if {$newinstname == $instname} {set newinstname $instname}
-	if {[instance list exists $newinstname] != ""} {set newinstname $instname}
     }
+
+    # Attempt to set the new instance name as specified in the dialog.
+    # If the entry is "(default)" or if there is a name collision,
+    # revert the name to the original name.
+
+    set newinstname [.params.title.ient get]
+    if {$newinstname == "(default)"} {set newinstname $instname}
+    if {[instance list exists $newinstname] != ""} {set newinstname $instname}
+
     if {[dict exists $parameters gencell]} {
         # Setting special parameter "gencell" forces the gencell to change type
 	set gencell_type [dict get $parameters gencell]
@@ -820,6 +875,20 @@ proc magic::gencell_change {instname gencell_type library parameters} {
     set gsuffix [magic::get_gencell_hash ${parameters}]
     set gname ${gencell_type}_${gsuffix}
 
+    # Handle instance name changing first.  If no parameters changed, then
+    # we're done.
+    if {$newinstname != $instname} {
+	identify $newinstname
+	# The buttons "Apply" and "Okay" need to be changed for the new
+	# instance name
+	catch {.params.buttons.apply config -command \
+		"magic::gencell_change $newinstname $gencell_type $library {}"}
+	catch {.params.buttons.okay config -command \
+		"magic::gencell_change $newinstname $gencell_type $library {} ;\
+		destroy .params"}
+	set instname $newinstname
+    }
+
     # Guard against instance having been deleted.  Also, if parameters have not
     # changed as evidenced by the cell suffix not changing, then nothing further
     # needs to be done.
@@ -855,31 +924,9 @@ proc magic::gencell_change {instname gencell_type library parameters} {
 	if {$abox != ""} {box values {*}$abox}
 	set newinstname [getcell $gname $orient]
         select cell $newinstname
+	set origname $newinstname
 	expand
 
-	# If the old instance name was not formed from the old cell name,
-	# then keep the old instance name.
-	if {[string first $old_gname $instname] != 0} {
-	    set newinstname $instname
-	}
-
-	if {[cellname list parents $old_gname] == []} {
-	    # If the original cell has no intances left, delete it.  It can
-	    # be regenerated if and when necessary.
-	    cellname delete $old_gname
-	}
-
-    } else {
-        select cell $instname
-	set orient [instance list orientation]
-	set abox [instance list abutment]
-	delete
-
-	# There is no cell of this name, so generate one and instantiate it.
-	if {$abox != ""} {box values {*}$abox}
-	set newinstname [magic::gencell_create $gencell_type $library $parameters $orient]
-	select cell $newinstname
-
 	# If the old instance name was not formed from the old cell name,
 	# then keep the old instance name.
 	if {[string first $old_gname $instname] != 0} {
@@ -893,6 +940,47 @@ proc magic::gencell_change {instname gencell_type library parameters} {
 			"magic::gencell_change $newinstname $gencell_type $library {} ;\
 			destroy .params"}
 	}
+
+	if {[cellname list parents $old_gname] == []} {
+	    # If the original cell has no intances left, delete it.  It can
+	    # be regenerated if and when necessary.
+	    cellname delete $old_gname -noprompt
+	    select cell $origname
+	}
+
+    } else {
+        select cell $instname
+	set orient [instance list orientation]
+	set abox [instance list abutment]
+	delete
+
+	# There is no cell of this name, so generate one and instantiate it.
+	if {$abox != ""} {box values {*}$abox}
+	set newinstname [magic::gencell_create $gencell_type $library $parameters $orient]
+	select cell $newinstname
+	set origname $newinstname
+
+	# If the old instance name was not formed from the old cell name,
+	# then keep the old instance name.
+	if {[string first $old_gname $instname] != 0} {
+	    set newinstname $instname
+	} else {
+	    # The buttons "Apply" and "Okay" need to be changed for the new
+	    # instance name
+	    catch {.params.buttons.apply config -command \
+			"magic::gencell_change $newinstname $gencell_type $library {}"}
+	    catch {.params.buttons.okay config -command \
+			"magic::gencell_change $newinstname $gencell_type $library {} ;\
+			destroy .params"}
+	}
+
+	# If the old cell is not used anywhere, delete it
+	if {[cellname list parents $old_gname] == []} {
+	    # If the original cell has no intances left, delete it.  It can
+	    # be regenerated if and when necessary.
+	    cellname delete $old_gname -noprompt
+	    select cell $origname
+	}
     }
     identify $newinstname
     eval "box values $savebox"
@@ -1023,38 +1111,47 @@ proc magic::get_gencell_name {gencell_type} {
 #   gives a result that is repeatable for the same set of
 #   parameter values with a very low probability of a collision.
 #
-#   The hash function is similar to elfhash but reduced from 32
+#   The hash function is murmur3 but reduced from 32 to 30 bits
-#   to 30 bits so that the result can form a 6-character value
+#   so that the result can form a 6-character value in base36
-#   in base32 with all characters being valid for a SPICE subcell
+#   with all characters being valid for a SPICE subcell name
-#   name (e.g., alphanumeric only and case-insensitive).
+#   (e.g., alphanumeric only and case-insensitive).  This
+#   reduces the space from ~4 billion unique suffixes to ~1
+#   billion;  however, even a complex mixed-signal chip design
+#   is unlikely to have more than a few hundred unique parameter
+#   sets for any given device.
+#
+#   Code courtesy of ChatGPT, derived from my implementation.
 #----------------------------------------------------------------
 
 proc magic::get_gencell_hash {parameters} {
-    set hash 0
+    # Canonicalize: sort by key
-    # Apply hash
+    set keys [lsort [dict keys $parameters]]
-    dict for {key value} $parameters {
+
-	foreach s [split $value {}] {
+    # Build input string (values only, but delimited)
-	    set hash [expr {($hash << 4) + [scan $s %c]}]
+    set input ""
-	    set high [expr {$hash & 0x03c0000000}]
+    foreach k $keys {
-	    set hash [expr {$hash ^ ($high >> 30)}]
+	set value [magic::normalize_value [dict get $parameters $k]]
-	    set hash [expr {$hash & (~$high)}]
+        append input "${value};"
-	}
     }
-    # Divide hash up into 5 bit values and convert to base32
+
-    # using letters A-Z less I and O, and digits 2-9.
+    # Compute Murmur hash
+    set hash [magic::murmur3_32 $input]
+
+    # Convert to 6-character base32
     set cvals ""
     for {set i 0} {$i < 6} {incr i} {
-	set oval [expr {($hash >> ($i * 5)) & 0x1f}]
+        set oval [expr {($hash >> ($i * 5)) & 0x1f}]
+
         if {$oval < 8} {
-	    set bval [expr {$oval + 50}]
+            set bval [expr {$oval + 50}]   ;# '2'-'9'
-	} elseif {$oval < 16} {
+        } elseif {$oval < 16} {
-	    set bval [expr {$oval + 57}]
+            set bval [expr {$oval + 57}]   ;# 'A'-'H'
-	} elseif {$oval < 21} {
+        } elseif {$oval < 21} {
-	    set bval [expr {$oval + 58}]
+            set bval [expr {$oval + 58}]   ;# 'J'-'N'
-	} else {
+        } else {
-	    set bval [expr {$oval + 59}]
+            set bval [expr {$oval + 59}]   ;# 'P'-'Z'
-	}
+        }
-	append cvals [binary format c* $bval]
+        append cvals [binary format c* $bval]
     }
     return $cvals
 }
@@ -1178,17 +1275,7 @@ proc magic::add_entry {pname ptext parameters} {
 proc magic::add_check_callbacks {gencell_type library} {
     set wlist [winfo children .params.body.area.edits]
     foreach w $wlist {
-        if {[regexp {\.params\.body\.area\.edits\.(.+)_ent} $w valid pname]} {
+	if {[regexp {\.params\.body\.area\.edits\.(.+)_.+} $w valid pname]} {
-	    # Add callback on enter or focus out
-	    bind $w <Return> \
-			"magic::update_dialog {} $pname $gencell_type $library"
-	    bind $w <FocusOut> \
-			"magic::update_dialog {} $pname $gencell_type $library"
-	}
-        if {[regexp {\.params\.body\.area\.edits\.(.+)_sel} $w valid pname]} {
-	    magic::add_dependency \{\} $gencell_type $library $pname
-	}
-        if {[regexp {\.params\.body\.area\.edits\.(.+)_chk} $w valid pname]} {
 	    magic::add_dependency \{\} $gencell_type $library $pname
 	}
     }
@@ -1207,6 +1294,16 @@ proc magic::add_check_callbacks {gencell_type library} {
 # dictionary.
 #
 # Also handle dependencies on checkboxes and selection lists
+#
+# If dependency callbacks exist, then chain them together.
+# A final default dependency will be added to all entries
+# to run the "check" procedure for the device.  Dependencies
+# that are more targeted get run first.
+#
+# NOTE:  The "check" procedure must be the first in the
+# list, as otherwise, any invalid entry that is corrected
+# by the check callback will have been used to evaluate
+# dependent values.
 #----------------------------------------------------------
 
 proc magic::add_dependency {callback gencell_type library args} {
@@ -1221,21 +1318,28 @@ proc magic::add_dependency {callback gencell_type library args} {
     foreach pname $args {
         if {[lsearch $clist .params.body.area.edits.${pname}_ent] >= 0} {
 	    # Add callback on enter or focus out
-	    bind .params.body.area.edits.${pname}_ent <Return> \
+	    set oldbind [bind .params.body.area.edits.${pname}_ent <Return>]
-			"magic::update_dialog $callback $pname $gencell_type $library"
+	    set newbind "magic::update_dialog $callback $pname $gencell_type $library"
-	    bind .params.body.area.edits.${pname}_ent <FocusOut> \
+	    if {$oldbind != {}} {set newbind "$oldbind ; $newbind"}
-			"magic::update_dialog $callback $pname $gencell_type $library"
+	    bind .params.body.area.edits.${pname}_ent <Return> $newbind
+	    set oldbind [bind .params.body.area.edits.${pname}_ent <FocusOut>]
+	    set newbind "magic::update_dialog $callback $pname $gencell_type $library"
+	    if {$oldbind != {}} {set newbind "$oldbind ; $newbind"}
+	    bind .params.body.area.edits.${pname}_ent <FocusOut> $newbind
 	} elseif {[lsearch $clist .params.body.area.edits.${pname}_chk] >= 0} {
 	    # Add callback on checkbox change state
-	    .params.body.area.edits.${pname}_chk configure -command \
+	    set oldcmd [.params.body.area.edits.${pname}_chk cget -command]
-			"magic::update_dialog $callback $pname $gencell_type $library"
+	    set newcmd "magic::update_dialog $callback $pname $gencell_type $library"
+	    if {$oldcmd != {}} {set newcmd "$oldcmd ; $newcmd"}
+	    .params.body.area.edits.${pname}_chk configure -command $newcmd
 	} elseif {[lsearch $clist .params.body.area.edits.${pname}_sel] >= 0} {
 	    set smenu .params.body.area.edits.${pname}_sel.menu
 	    set sitems [${smenu} index end]
 	    for {set idx 0} {$idx <= $sitems} {incr idx} {
-		set curcommand [${smenu} entrycget $idx -command]
+		set oldcmd [${smenu} entrycget $idx -command]
-		${smenu} entryconfigure $idx -command "$curcommand ; \
+		set newcmd "magic::update_dialog $callback $pname $gencell_type $library"
-		magic::update_dialog $callback $pname $gencell_type $library"
+		if {$oldcmd != {}} {set newcmd "$oldcmd ; $newcmd"}
+		${smenu} entryconfigure $idx -command $newcmd
 	    }
 	}
     }
@@ -1256,13 +1360,13 @@ proc magic::update_dialog {callback pname gencell_type library} {
 	set parameters [dict merge $pdefaults [magic::gencell_getparams]]
     }
 
-    if {$callback != {}} {
-       set parameters [$callback $pname $parameters]
-    }
     if {[catch {set parameters [${library}::${gencell_type}_check $parameters]} \
 		checkerr]} {
 	puts stderr $checkerr
     }
+    if {$callback != {}} {
+       set parameters [$callback $pname $parameters]
+    }
     magic::gencell_setparams $parameters
 }
 
@@ -1626,3 +1730,99 @@ proc magic::gencell_dialog {instname gencell_type library parameters} {
 }
 
 #-------------------------------------------------------------
+# Implementation of murmur3 hash, 32 bits
+# Code courtesy of ChatGPT.
+#-------------------------------------------------------------
+
+proc magic::murmur3_32 {key {seed 0}} {
+    set length [string length $key]
+
+    set c1 0xcc9e2d51
+    set c2 0x1b873593
+
+    set h1 $seed
+
+    # Body (process 4 bytes at a time)
+    set nblocks [expr {$length / 4}]
+    for {set i 0} {$i < $nblocks} {incr i} {
+        binary scan [string range $key [expr {$i*4}] [expr {$i*4+3}]] i k1
+
+        set k1 [expr {($k1 * $c1) & 0xffffffff}]
+        set k1 [expr {(($k1 << 15) | (($k1 & 0xffffffff) >> 17)) & 0xffffffff}]
+        set k1 [expr {($k1 * $c2) & 0xffffffff}]
+
+        set h1 [expr {$h1 ^ $k1}]
+        set h1 [expr {(($h1 << 13) | (($h1 & 0xffffffff) >> 19)) & 0xffffffff}]
+        set h1 [expr {(($h1 * 5) + 0xe6546b64) & 0xffffffff}]
+    }
+
+    # Tail
+    set k1 0
+    set tail_index [expr {$nblocks * 4}]
+    set tail [string range $key $tail_index end]
+    set remaining [string length $tail]
+
+    if {$remaining >= 3} {
+        binary scan [string index $tail 2] c b
+        set k1 [expr {$k1 ^ (($b & 0xff) << 16)}]
+    }
+    if {$remaining >= 2} {
+        binary scan [string index $tail 1] c b
+        set k1 [expr {$k1 ^ (($b & 0xff) << 8)}]
+    }
+    if {$remaining >= 1} {
+        binary scan [string index $tail 0] c b
+        set k1 [expr {$k1 ^ ($b & 0xff)}]
+        set k1 [expr {($k1 * $c1) & 0xffffffff}]
+        set k1 [expr {(($k1 << 15) | (($k1 & 0xffffffff) >> 17)) & 0xffffffff}]
+        set k1 [expr {($k1 * $c2) & 0xffffffff}]
+        set h1 [expr {$h1 ^ $k1}]
+    }
+
+    # Finalization (fmix)
+    set h1 [expr {$h1 ^ $length}]
+    set h1 [expr {$h1 ^ (($h1 & 0xffffffff) >> 16)}]
+    set h1 [expr {($h1 * 0x85ebca6b) & 0xffffffff}]
+    set h1 [expr {$h1 ^ (($h1 & 0xffffffff) >> 13)}]
+    set h1 [expr {($h1 * 0xc2b2ae35) & 0xffffffff}]
+    set h1 [expr {$h1 ^ (($h1 & 0xffffffff) >> 16)}]
+
+    return $h1
+}
+
+#-------------------------------------------------------------
+# Numerical normalization:  Avoid having different suffixes
+# for cells with the same parameter values due to Tcl handling
+# numerical values as strings, which makes "2", "2.0", and "2e0"
+# all separate values.  If hashed on the verbatim values, then
+# the same device with the same parameters can have many
+# different cell names, even though the layout is exactly the
+# same.  Avoid this by detecting when a parameter value is
+# numeric and enforcing a consistent format (fixed precision,
+# four decimal places).
+#
+# Code courtesy of ChatGPT
+#-------------------------------------------------------------
+
+proc magic::normalize_value {value} {
+    # Detect if value is numeric
+    if {[string is double -strict $value]} {
+        set num [expr {double($value)}]
+
+        # Check if effectively integer
+        if {abs($num - round($num)) < 1e-9} {
+            return [format "%d" [expr {int(round($num))}]]
+        }
+
+        # Otherwise, format to fixed precision (3 decimal places)
+        set str [format "%.3f" $num]
+
+        # Strip trailing zeros
+        regsub {\.?0+$} $str "" str
+
+        return $str
+    }
+
+    # Non-numeric: return as-is
+    return $value
+}

tcltk/tools.tcl

@@ -534,8 +534,11 @@ proc magic::enable_tools {} {
    # The user can change these bindings at will by using the
    # "macro" command when the tool is active.
 
+   # NOTE:  Do not name a tool "netlist" because it will get
+   # confused with the "netlist" window.
+
    magic::macro copy wiring
-   magic::macro copy netlist
+   magic::macro copy nettool
    magic::macro copy pick
 
    magic::tool wiring
@@ -549,7 +552,7 @@ proc magic::enable_tools {} {
    macro  Button4 "wire incr width ; wire show"
    macro  Button5 "wire decr width ; wire show"
 
-   magic::tool netlist
+   magic::tool nettool
    macro  Button1          "netlist select"
    macro  Button2          "netlist join"
    macro  Button3          "netlist terminal"
@@ -704,8 +707,8 @@ proc magic::tool {{type next}} {
    if {$type == "next"} {
       switch $Opts(tool) {
 	 box { set type wiring }
-	 wiring { set type netlist }
+	 wiring { set type nettool }
-	 netlist { set type pick }
+	 nettool { set type pick }
 	 pick { set type box }
       }
    }
@@ -761,9 +764,9 @@ proc magic::tool {{type next}} {
 	 set Opts(tool) wiring
 	 cursor 19 	;# sets the cursor
       }
-      netlist {
+      nettool {
 	 puts stdout {Switching to NETLIST tool.}
-	 set Opts(tool) netlist
+	 set Opts(tool) nettool
 	 cursor 18	;# sets the cursor
       }
       pick {

textio/textio.h

@@ -25,6 +25,8 @@
 #ifndef _MAGIC__TEXTIO__TEXTIO_H
 #define _MAGIC__TEXTIO__TEXTIO_H
 
+#include <stdarg.h> /* va_list */
+
 #include "utils/magic.h"
 #include "utils/dqueue.h" /* DQueue */
 

textio/textioInt.h

@@ -42,20 +42,6 @@ typedef struct {
 #define TX_PROMPT	'>'
 #define TX_CMD_PROMPT	":"
 
-/* all of the state associated with a tty terminal */
-#if !defined(SYSV) && !defined(CYGWIN) && !defined(__OpenBSD__) && !defined(EMSCRIPTEN)
-#if defined(HAVE_SYS_IOCTL_COMPAT_H) || defined(HAVE_SGTTY_H)
-#if defined(HAVE_SYS_IOCTL_COMPAT_H)
-#include <sys/ioctl_compat.h> /* replaced sgtty.h */
-#elif defined(HAVE_SGTTY_H)
-#include <sgtty.h>/* legacy - struct sgttyb{} defn */
-#endif
-typedef struct {
-    struct sgttyb tx_i_sgtty;
-    struct tchars tx_i_tchars;
-} txTermState;
-#endif /* HAVE_SYS_IOCTL_COMPAT_H || HAVE_SGTTY_H */
-#endif /* SYSV */
 
 extern bool TxGetInputEvent(bool block, bool returnOnSigWinch);
 

textio/txCommands.c

@@ -39,7 +39,6 @@ static char rcsid[] __attribute__ ((unused)) ="$Header: /usr/cvsroot/magic-8.0/t
 #endif
 
 #include "tcltk/tclmagic.h"
-#include "utils/magsgtty.h"
 #include "utils/magic.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"

textio/txInput.c

@@ -32,14 +32,13 @@ static char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magic-8.0/
 #include <dirent.h>
 
 
-#include "utils/magsgtty.h"
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "utils/main.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "textio/txcommands.h"
 #include "textio/textioInt.h"
+#include "utils/magsgtty.h"	/* txTermState */
 #include "utils/dqueue.h"
 #include "utils/macros.h"
 #include "utils/hash.h"
@@ -1225,36 +1224,21 @@ TxGetLine(
  * ----------------------------------------------------------------------------
  */
 
-#if defined(SYSV) || defined(CYGWIN)
-
-void
-txGetTermState(
-    struct termio *buf)
-{
-    ioctl( fileno( stdin ), TCGETA, buf);
-}
-
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
-
-void
-txGetTermState(
-    struct termios *buf)
-{
-    (void) tcgetattr(fileno(stdin), buf);
-}
-
-#else
-
 void
 txGetTermState(
     txTermState *buf)
 {
+#if defined(HAVE_TERMIOS_H)
+    (void) tcgetattr(fileno(stdin), &buf->termios);
+#elif defined(HAVE_TERMIO_H)
+    ioctl(fileno(stdin), TCGETA, &buf->termio);
+#else /* sgtty */
     ASSERT(TxStdinIsatty, "txGetTermState");
     /* save the current terminal characteristics */
-    (void) ioctl(fileno(stdin), TIOCGETP, (char *) &(buf->tx_i_sgtty) );
+    (void) ioctl(fileno(stdin), TIOCGETP, (char *) &buf->tx_i_sgtty);
-    (void) ioctl(fileno(stdin), TIOCGETC, (char *) &(buf->tx_i_tchars) );
+    (void) ioctl(fileno(stdin), TIOCGETC, (char *) &buf->tx_i_tchars);
+#endif
 }
-#endif /* SYSV */
 
 
 /*
@@ -1273,24 +1257,17 @@ txGetTermState(
 
 void
 txSetTermState(
-#if defined(SYSV) || defined(CYGWIN)
+    txTermState *buf)
-    struct termio *buf
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
-    struct termios *buf
-#else
-    txTermState *buf
-#endif /* SYSV */
-    )
 {
-#if defined(SYSV) || defined(CYGWIN)
+#if defined(HAVE_TERMIOS_H)
-    ioctl( fileno(stdin), TCSETAF, buf );
+    (void) tcsetattr(fileno(stdin), TCSANOW, &buf->termios);
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
+#elif defined(HAVE_TERMIO_H)
-    (void) tcsetattr( fileno(stdin), TCSANOW, buf );
+    ioctl(fileno(stdin), TCSETAF, &buf->termio);
-#else
+#else /* sgtty */
     /* set the current terminal characteristics */
-    (void) ioctl(fileno(stdin), TIOCSETN, (char *) &(buf->tx_i_sgtty) );
+    (void) ioctl(fileno(stdin), TIOCSETN, (char *) &buf->tx_i_sgtty);
-    (void) ioctl(fileno(stdin), TIOCSETC, (char *) &(buf->tx_i_tchars) );
+    (void) ioctl(fileno(stdin), TIOCSETC, (char *) &buf->tx_i_tchars);
-#endif /* SYSV */
+#endif
 }
 
 
@@ -1313,37 +1290,27 @@ txSetTermState(
 
 void
 txInitTermRec(
-#if defined(SYSV) || defined(CYGWIN)
+    txTermState *buf)
-    struct termio *buf
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
-    struct termios *buf
-#else
-    txTermState *buf
-#endif /* SYSV */
-    )
 {
-#if defined(SYSV) || defined(CYGWIN) || defined(__OpenBSD__) || defined(EMSCRIPTEN)
+#if defined(HAVE_TERMIOS_H)
-    buf->c_lflag = ISIG;    /* raw: no echo and no processing, allow signals */
+    buf->termios.c_lflag = ISIG;    /* raw: no echo and no processing, allow signals */
-    buf->c_cc[ VMIN ] = 1;
+    buf->termios.c_cc[ VMIN ] = 1;
-    buf->c_cc[ VTIME ] = 0;
+    buf->termios.c_cc[ VTIME ] = 0;
-#else
+#elif defined(HAVE_TERMIO_H)
+    buf->termio.c_lflag = ISIG;    /* raw: no echo and no processing, allow signals */
+    buf->termio.c_cc[ VMIN ] = 1;
+    buf->termio.c_cc[ VTIME ] = 0;
+#else /* sgtty */
     /* set things up for us, turn off echo, turn on cbreak, no EOF */
     buf->tx_i_sgtty.sg_flags |= CBREAK;
     buf->tx_i_sgtty.sg_flags &= ~ECHO;
     buf->tx_i_tchars.t_eofc = -1;
-
+#endif
-#endif /* SYSV */
 }
 
 
 
-#if defined(SYSV) || defined(CYGWIN)
-struct termio closeTermState;
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
-struct termios closeTermState;
-#else
 static txTermState closeTermState;
-#endif /* SYSV */
 
 static bool haveCloseState = FALSE;
 
@@ -1366,21 +1333,21 @@ static bool haveCloseState = FALSE;
 void
 txSaveTerm(void)
 {
-#if defined(SYSV) || defined(CYGWIN)
+#if defined(HAVE_TERMIOS_H)
-    ioctl( fileno( stdin ), TCGETA, &closeTermState);
+    (void) tcgetattr(fileno(stdin), &closeTermState.termios);
-    txEraseChar = closeTermState.c_cc[VERASE];
+    txEraseChar = closeTermState.termios.c_cc[VERASE];
-    txKillChar =  closeTermState.c_cc[VKILL];
+    txKillChar = closeTermState.termios.c_cc[VKILL];
-    TxEOFChar = closeTermState.c_cc[VEOF];
+    TxEOFChar = closeTermState.termios.c_cc[VEOF];
-    TxInterruptChar = closeTermState.c_cc[VINTR];
+    TxInterruptChar = closeTermState.termios.c_cc[VINTR];
     haveCloseState = TRUE;
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
+#elif defined(HAVE_TERMIO_H)
-    (void) tcgetattr( fileno( stdin ), &closeTermState);
+    ioctl(fileno(stdin), TCGETA, &closeTermState.termio);
-    txEraseChar = closeTermState.c_cc[VERASE];
+    txEraseChar = closeTermState.termio.c_cc[VERASE];
-    txKillChar =  closeTermState.c_cc[VKILL];
+    txKillChar = closeTermState.termio.c_cc[VKILL];
-    TxEOFChar = closeTermState.c_cc[VEOF];
+    TxEOFChar = closeTermState.termio.c_cc[VEOF];
-    TxInterruptChar = closeTermState.c_cc[VINTR];
+    TxInterruptChar = closeTermState.termio.c_cc[VINTR];
     haveCloseState = TRUE;
-#else
+#else /* sgtty */
     struct ltchars lt;
     txGetTermState(&closeTermState);
     (void) ioctl(fileno(stdin), TIOCGLTC, (char *) &lt);
@@ -1393,7 +1360,7 @@ txSaveTerm(void)
     TxEOFChar = closeTermState.tx_i_tchars.t_eofc;
     TxInterruptChar = closeTermState.tx_i_tchars.t_intrc;
     haveCloseState = TRUE;
-#endif /* SYSV */
+#endif
 }
 
 
@@ -1414,13 +1381,7 @@ txSaveTerm(void)
 void
 TxSetTerminal(void)
 {
-#if defined(SYSV) || defined(CYGWIN)
-    struct termio buf;
-#elif defined (__OpenBSD__) || defined(EMSCRIPTEN)
-    struct termios buf;
-#else
     txTermState buf;
-#endif /* SYSV */
 
 #ifdef MAGIC_WRAPPER
     /* If using Tk console, don't mess with the terminal settings;	  */

textio/txMain.c

@@ -26,7 +26,6 @@ static char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magic-8.0/
 #include <string.h>
 #include <unistd.h>
 
-#include "utils/magsgtty.h"
 #include "utils/magic.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"

textio/txOutput.c

@@ -31,7 +31,6 @@ static char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magic-8.0/
 #include <sys/stat.h>
 #include <unistd.h>
 
-#include "utils/magsgtty.h"
 #include "utils/magic.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"

utils/magsgtty.h

@@ -21,44 +21,54 @@
 #ifndef	_MAGIC__UTILS__MAGSGTTY_H
 #define _MAGIC__UTILS__MAGSGTTY_H
 
-/* maybe this can be #ifndef HAVE_TERMIO_H */
-#if !defined(SYSV) && !defined(CYGWIN)
-
-# ifdef	ALPHA
-# undef MAX
-# undef MIN
-# endif
-
-/* unclear what platform requires this OpenBSD/FreeBSD ? */
-# ifndef COMPAT_43TTY
-# define COMPAT_43TTY
-# endif
-
-#ifdef HAVE_SYS_IOCTL_H
-#include <sys/ioctl.h>
-#endif
 
 #if defined(HAVE_TERMIOS_H)
-#include <termios.h>
+ /* In modern times everything has POSIX */
-#elif defined(HAVE_SYS_IOCTL_COMPAT_H)
+ #include <termios.h>
-/* unclear which platform(s) require <sys/ioctl_compat.h> and the structure
+
- *  of this file is such that it will try to include it by default, better
+ #ifdef HAVE_SYS_IOCTL_H
- *  to invert the #if and only select this on the known platforms that need
+  /* Linux glibx 2.x       - present
- *  it so that <termios.h> goes by default, which exists on MacOSX, Linux, etc..
+   * FreeBSD 14.3-RELEASE  - present
- * many possible solutions to make this work by default:
+   * Solaris 11.4          - present
- *   HAVE_SYS_IOCTL_COMPAT_H ?  HAVE_TERMIOS_H ?  !defined(linux) at top (MaxOSX is BSD type)
+   */
- */
+  #include <sys/ioctl.h>
-#include <sys/ioctl_compat.h> /* replaced sgtty.h */
+ #endif
-#elif defined(HAVE_SGTTY_H)
+
-#include <sgtty.h> /* legacy - struct sgttyb{} defn */
+#elif defined(HAVE_TERMIO_H)
+ /* Linux glibx 2.x       - present (just includes termios.h & sys/ioctl.h)
+  * Linux glibc 2.45+     - not present
+  * FreeBSD 14.3-RELEASE  - not present
+  * Solaris 11.4          - present
+  */
+ #include <termio.h>
+#else /* sgtty */
+ #if defined(HAVE_SYS_IOCTL_COMPAT_H)
+  /* Linux glibc2.x        - not present
+   * FreeBSD 14.3-RELEASE  - not present
+   * Solaris 11.4          - not present
+   */
+  #include <sys/ioctl_compat.h> /* replaced sgtty.h */
+ #elif defined(HAVE_SGTTY_H)
+  /* Linux glibc2.x        - present (includes sys/ioctl.h)
+   * FreeBSD 14.3-RELEASE  - not present
+   * Solaris 11.4          - present
+   */
+  #include <sgtty.h> /* legacy - struct sgttyb{} defn */
+ #endif
 #endif
 
-#else
 
-#if defined(HAVE_TERMIO_H)
+/* all of the state associated with a tty terminal */
-#include <termio.h>
+typedef struct {
+#if defined(HAVE_TERMIOS_H)
+    struct termios termios;
+#elif defined(HAVE_TERMIO_H)
+    struct termio termio;
+#else /* sgtty */
+    struct sgttyb tx_i_sgtty;
+    struct tchars tx_i_tchars;
 #endif
+} txTermState;
 
-#endif /* !SYSV && !CYGWIN */
 
 #endif	/* _MAGIC__UTILS__MAGSGTTY_H */

utils/main.c

@@ -38,7 +38,6 @@ static char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magic-8.0/
 #include "utils/main.h"
 #include "utils/magic.h"
 #include "utils/malloc.h"
-#include "utils/magsgtty.h"
 #include "utils/hash.h"
 #include "utils/macros.h"
 #include "textio/textio.h"

utils/signals.c

@@ -33,7 +33,6 @@ static char rcsid[] __attribute__ ((unused)) = "$Header: /usr/cvsroot/magic-8.0/
 #include "tcltk/tclmagic.h"
 #include "utils/main.h"
 #include "utils/magic.h"
-#include "utils/magsgtty.h"
 #include "textio/textio.h"
 #include "utils/geometry.h"
 #include "utils/signals.h"

windows/windCmdAM.c

@@ -1056,6 +1056,7 @@ windDoMacro(w, cmd, interactive)
     bool do_help = FALSE;
     bool do_reverse = FALSE;
     char *searchterm = NULL;
+    char *clientName = NULL;
     macrodef *cMacro;
     HashTable *clienttable;
     HashEntry *h;
@@ -1073,9 +1074,25 @@ windDoMacro(w, cmd, interactive)
 
     argstart = 1;
     if (cmd->tx_argc == 1)
-	wc = DBWclientID;  /* Added by NP 11/15/04 */
+	wc = DBWclientID;	/* Default client */
     else if (cmd->tx_argc > 1)
+    {
 	wc = WindGetClient(cmd->tx_argv[1], TRUE);
+	if (wc != NULL)
+	{
+	    clientName = cmd->tx_argv[1];
+	    argstart++;
+	}
+	else
+	{
+	    /* Check if argument is a known layout button handler */
+	    if (DBWButtonHandlerIndex(cmd->tx_argv[1]) != -1)
+	    {
+		clientName = cmd->tx_argv[1];
+		argstart++;
+	    }
+	}
+    }
 
     while (cmd->tx_argc > argstart)
     {
@@ -1116,6 +1133,15 @@ windDoMacro(w, cmd, interactive)
 			wc = DBWclientID;
 		}
 		MacroCopy(wc, cmd->tx_argv[argstart]);
+
+		/* If tool name did not previously exist, then add
+		 * it to the list of known tool names, so that it
+		 * can be found later by the "macro" command.
+		 */
+		if (DBWButtonHandlerIndex(cmd->tx_argv[argstart]) == -1)
+		    DBWAddButtonHandler(cmd->tx_argv[argstart],	
+				(const cb_database_buttonhandler_t)NULL,
+				0, (const char *)NULL);
 	    }
 	    return;
 	}
@@ -1147,26 +1173,53 @@ windDoMacro(w, cmd, interactive)
 
 	    if (MacroKey(cmd->tx_argv[argstart], &verbose) == 0)
 		if (MacroKey(cmd->tx_argv[argstart + 1], &verbose) != 0)
-		{
-		    wc = 0;
-		    argstart++;
 		    return;
-		}
 	}
     }
-    else
+
-	argstart++;
+    /* If a clientName wasn't given, but wc is DBWclientID, then get
+     * the clientName from the default button handler.
+     */
+
+    if ((clientName == NULL) && (wc == DBWclientID))
+	clientName = DBWGetButtonHandler();
 
     if (cmd->tx_argc == argstart)
     {
-	if (wc == (WindClient)0)
+	if (clientName == NULL)
+	    h = NULL;
+	else
+	    h = HashLookOnly(&MacroClients, (char *)clientName);
+
+	if (h == NULL)
 	{
-	    TxError("No such client.\n");
+#ifdef MAGIC_WRAPPER
+	    Tcl_Obj *lobj;
+	    lobj = Tcl_NewListObj(0, NULL);
+#endif
+	    TxError("Cannot get macro list from current window.\n");
+#ifndef MAGIC_WRAPPER
+	    TxError("List of known macro clients:\n");
+#endif
+	    /* If clientName was not in MacroClients, then what is? */
+	    HashStartSearch(&hs);
+	    while ((h = HashNext(&MacroClients, &hs)) != NULL)
+	    {
+		char *clientName = h->h_key.h_name;
+#ifdef MAGIC_WRAPPER
+		Tcl_ListObjAppendElement(magicinterp, lobj,
+				Tcl_NewStringObj(clientName, -1));
+#else
+		TxError("%s ", clientName);
+#endif
+	    }
+#ifdef MAGIC_WRAPPER
+	    Tcl_SetObjResult(magicinterp, lobj);
+#else
+	    TxError("\n");
+#endif
 	    return;
 	}
-	h = HashLookOnly(&MacroClients, (char *)wc);
-	if (h == NULL)
-	    return;
 	else
 	{
 	    clienttable = (HashTable *)HashGetValue(h);

windows/windCmdSZ.c

@@ -954,7 +954,7 @@ windXviewCmd(w, cmd)
 
     celluse = (CellUse *) (w->w_surfaceID);
     DBExpandAll(celluse, &(celluse->cu_bbox),
-	((DBWclientRec *)w->w_clientData)->dbw_bitmask, FALSE,
+	((DBWclientRec *)w->w_clientData)->dbw_bitmask, DB_UNEXPAND,
 	ViewUnexpandFunc,
 	(ClientData)(pointertype) (((DBWclientRec *)w->w_clientData)->dbw_bitmask));