natural flattening from a selection. That is, instead of
specifying "flatten -doinplace <cell>", you can select some
number of instances and just do "flatten -doinplace".
library has been read in with the "gds readonly true" option set
because the cell contains information on where in the GDS the
cell is located, but the cell is empty because it was flattened
into the magic view and all of its contents were erased. This can
cause issues with LVS if magic generates an empty cell into the
netlist and the LVS tool tries to compare the cells by name. Also,
this prevents unnecessary .ext files and unnecessary merges to the
substrate of such cells (since all cells have an implied substrate).
supported). Fixed the long-standing issue in which DRC does not
get stopped by the "drc off" command (the behavior for interrupting
the DRC was dependent on the DRC being turned on, and the "drc off"
command was turning it off before breaking, causing the interrupt
to be ignored).
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
flattening based on cells which have a property "flatten". Also:
Modified the DEF read and write to convert DIEAREA into a
FIXED_BBOX property. This solves issues with placing of components
from DEF, when those components may not have have come from place &
route and may not have P&R bounding boxes. Also: Fixed the
documentation for the "dump" command, which was missing the optional
orientation in the description.
fact that "extract all" does not enumerate cells from bottom up
as I had assumed---The order is roughly bottom-to-top, but cells
re-used in different places in the hierarchy could end up called
before one or more of their own subcells is extracted. Since
this conflicted with the preparation of the substrate in each
extracted subcircuit, I changed the method to enumerate cells so
that it is properly bottom-to-top. Also, methods were added to
"extract" (incremental), "extract cell", and "extract parents"
to ensure that the substrate is prepared on all subcells before
extraction.
timestamps that are fixed, since the timestamp update routine is
called from too many places, too many times. Instead created a
new cell definition flag indicating a fixed timestamp, which can
be set by "cellname timestamp" for an individual cell, or with
"gds datestamp" for cells read from a GDS file.
this limited ports to 16384, which seemed reasonable at the time.
However, the sky130_sram_macro layouts connect power and ground in a
way that when coupled with "extract unique" can generate tens of
thousands of ports and overrun the bit field, showing that automation
can do the unexpected. The solution was to split out the port number
from the label record as its own 32-bit value.
an optional extra argument to the "select" command that can be used
to select labels by glob-style matching; e.g., "select area labels
VSS*" or "select less area labels *_1". This will help in managing
labels after flattening a standard cell design; e.g., by using
"select less area labels */VDD".
recursive loop and crash magic. Corrected a number of other issues
along the way, especially one where routines in EFantenna and extresist
make use of array EFDevTypes which was only created by ext2sim and
ext2spice, and freed when done. Having run extresist through valgrind,
there are still issues in the code.
This can be done now by reading a LEF file, followed by reading
a GDS file with the "noduplicates" option set. In addition,
annotation of either the LEF view or a read-only view follows the
same protocol as cell paths in the .mag file, which is to replace
leading path components matching Tcl variables for PDKPATH or
PDKROOT, and replace the home directory path with a tilde.
commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
for saving on a cell which is completely unmodified. One of these
was due to the BPlane implementation, which forces an instance to be
deleted and re-placed on a bounding box recomputation, which should
not, in that case, be considered a modification. Another always runs
DRC on a subcell upon reading rather than relying on any checkplane
entries in the file itself; and the last one marking the timestamp
as modified stemming from an attempt to correct an O(N^2) check to
O(N). All three cases have now been corrected.
one is an "off_grid" DRC type, which can be used to check geometry
that is below the manufacturing grid. Normally magic prevents the
grid from being subdivided below the manufacturing grid, but this
limit can be removed and replaced by DRC checks to check for such
errors in a GDS file of unknown origin. The second version looks
for interactions between subcells that end up with intersections
of non-manhattan geometry landing on points that are not on the
database internal grid. Such errors cannot be seen by magic's DRC
engine by definition, and so must be detected while flattening
geometry for the DRC checks.
to stop the search whenever a cell is not found. Used this to implement
a new option for GDS writes, "gds undefined allow|disallow" (default
"disallow") controls whether or not GDS with undefined references will
be allowed to be written. Similarly affects CIF and LEF writes, extraction,
and DRC (when running "drc check" from the top).
Ghazy) to read pin uses from a DEF file, including the three types
that are not defined by the LEF format (go figure). Expanded the
bitmask of label flags to include the additional use types. Also
shifted the label flag bitmask up to make additional room for more
port number, as there is no point in having unused bits in the
bitmask.
unique" code. It was using DBEraseLabelsByContent() which would
erase all matching labels, and could potentially erase labels that
were still remaining on the list being processed, causing a segfault.
Also corrected minor errors identified by valgrind during debugging
the above-referenced problem.
Instead of a 6-character suffix generated randomly, the 6-character
suffix is generated by a hash algorithm from the device parameters.
If the cell parameters are changed, then the cell itself changes.
If the instance name was default (derived from the cell name) then
the instance name changes accordingly. The result is that there
cannot be two (auto-)generated cells with the same parameters but
with different cell names.
could cause serious errors on systems that do not auto-zero allocated
memory. Also: Fixed an error introduced by a recent commit to allocate
character memory for efReadLine() which frees the memory before reading
a .res.ext file, causing a crash when using "ext2spice" with the
"extresist on" option.
optional name field to the "substrate" line in the extract section
of the techfile. This is the default name of the substrate if not
connected to anything labeled. It may use a Tcl variable (preferred).
(2) Added command option "instance orientation [-def]" that returns
the orientation of the named or selected instance. The -def option
returns the orientation using DEF naming convention; otherwise, the
naming used with "getcell" is generated.
substrate more than once for the same subcell, since the substrate
extraction method scans the entire plane area; this was making
large standard cell layouts extract very slowly, as every component
cell was causing the substrate search to be repeated.
Conflicts:
VERSION
database/DBcellsrch.c
database/DBconnect.c
extract/ExtInter.c
lef/Depend
utils/Depend
Updated bplane branch with all changes to master since the bplane branch
was last modified.
flag definition had been put in database.h instead of database.h.in,
and so was deleted on "make clean". Also, corrected a problem that
causes the cif output style to be lost when running DRC-CIF checks
if the first output style is the DRC style.
development had been halted since it was first created back in April.
Version 8.2 is now the official development version, with the first
development push to create a Cairo graphics interface.
Tim Edwards
Alessandro De Laurenzis
Ryan Schmidt