of a label from the command line. Also fixed a long-standing
irritation that "setlabel" would change the properties of a label
in the edit cell but not in the selection itself, which would
cause the label to be drawn both with the original properties
in the selection and the new properties in the edit cell. Now
both views will track the same changes.
natural flattening from a selection. That is, instead of
specifying "flatten -doinplace <cell>", you can select some
number of instances and just do "flatten -doinplace".
flattening, since the appearance of the layout will change even
though there are no physical changes. Finally got around to
debugging and correcting the input mask-hints, which can
preserve vendor GDS by marking areas where the vendor GDS differs
from magic's automatically generated output (the method was
almost correct and only needed an input scale factor change).
commit to prevent port labels from being copied up from the
flattened cell into the parent, and prefixing the instance
name to text in the instance top level so that there will be
no port or label collisions in the parent cell after flattening
the child cell in place. Also: Changed "extract dolabelcheck"
to be the default setting.
that the feature for implementing callbacks on a selection list
was already implemented via the add_dependency procedure.
Modified the GDS read to remove cell instances that are placed
directly on top of one another in the same cell. Modified the
GDS read to make a better selection of a default font size for
text that specifies a font but not a size, using the minimum
width for the layer the text is placed on. Modified the GDS
read to remove text with empty-string placeholders (created when
a pin layer is read but no text exists to go along with it, due
to GDS not having a specific way to make pins, such that pins
have to be split between one record for geometry and another
for text).
should have been done a long time ago! Allows an instance to be
flattened in place inside a cell def, which otherwise requires
a complicated set of commands to do. Also: Modified the polygon
handling routine from the previous commit so that it correctly
removes the polygon cell defs after flattening them into the
parent cell.
supported). Fixed the long-standing issue in which DRC does not
get stopped by the "drc off" command (the behavior for interrupting
the DRC was dependent on the DRC being turned on, and the "drc off"
command was turning it off before breaking, causing the interrupt
to be ignored).
attempt is made to write an abstract view to GDS. This behavior can
be overridded with the new command option "gds abstract [enable|disable]".
Also: Corrected extraction to allow split tiles to be set as the
reference tile for a node. Previously this was allowed only if the
tile was the first to be searched, but that can cause different tiles to
be marked as the reference depending on where the search starts,
resulting in different names for the same node in .ext files, which is
bad. Also: Modified the LEF annotation to avoid bad entries in the LEF
that would create layers in the layout where none exist.
Alessandro De Laurenzis. That pull request cleaned up the vast
majority of compiler warnings. However, that cleanup exposed a
few additional warnings pointing to errors in the code that needed
fixing. The code now compiles cleanly except for one warning
about redefined CAD_DIR that I have not looked into.
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
flattening based on cells which have a property "flatten". Also:
Modified the DEF read and write to convert DIEAREA into a
FIXED_BBOX property. This solves issues with placing of components
from DEF, when those components may not have have come from place &
route and may not have P&R bounding boxes. Also: Fixed the
documentation for the "dump" command, which was missing the optional
orientation in the description.
alternative separator "." instead of "/". This prevents other
routines that expect "/" to indicate a true hierarchy from treating
the label as hierarchical instead of flat, which should be the
correct handling for a flattened cell.
Previous commits changed the port IDs to an integer rather than a
bitfield. However, the first and next commands were utilizing that
a -1 became a large positive integer when masked. This resulted in
the min port operations failing. Added a default comparison with -1
to fix the problem.
reading GDS files, caused by an unneeded change to pass both
the "original" filename and the actual filename when handling
compressed files---The original filename is unneeded.
(2) Implemented several new methods for parasitic extraction. The
first is an option offset value to apply to sidewall calculations.
This handles issues where actual wire separation is different
from drawn wire separation, which can be significant for the
1/d calculation of sidewall coupling. The second method is to
use the recently-added fringe halo to compute the coupling of the
fringe capacitance to nearby wires. Prior to this change, all
fringe capacitance was applied to surfaces directly under a wire
edge as if the fringe capacitance did not extend outward from the
edge. Now the capacitance is properly pro-rated for the position
of any overlapped shape inside the fringing field. Finally, the
third method added is a new search algorithm for finding the
nearest shapes along the length of a boundary. This is used for
sidewall coupling and fringe shielding, where the nearest shape
dominates the coupling, and any shapes behind are shielded and
may (to first order) be ignored. Previously, the entire halo
was searched without regard to shapes shielding other shapes
behind, and a recent correction added an ad-hoc search for
blocking shapes that was inefficient and not always correct.
The new method is both efficient and accurate.
Compression levels of the output can be controlled with the "gds
compress [<value>]" command, where <value> 0 (default) is uncompressed
output, 6 is "normal" gzip compression, and 9 is maximum compression.
pointing GDS_FILE to a compressed filename when using "gds readonly
true" on a compressed file. The start and end pointers still point
to data bounds in the uncompressed file.
of systems calls to "gzip" and "gunzip". A compressed GDS file can
be made simply by doing "gds write <name>.gds.gz", and can be read
simply by doing "gds read <name>.gds.gz". Names of compressed files
can be put in the GDS_FILE property of a cell.
to NULL for a read-only view. . . Changed the command "what" so that
it will not fail on a non-edit cell. There are likely a few other
commands that should not fail on non-edit cells because they do not
alter anything.
recognized as a valid command when file locking has been disabled as
a compile-time option. The command then generates an error on
"locking enable" but simply ignores the command "locking disable".
fact that "extract all" does not enumerate cells from bottom up
as I had assumed---The order is roughly bottom-to-top, but cells
re-used in different places in the hierarchy could end up called
before one or more of their own subcells is extracted. Since
this conflicted with the preparation of the substrate in each
extracted subcircuit, I changed the method to enumerate cells so
that it is properly bottom-to-top. Also, methods were added to
"extract" (incremental), "extract cell", and "extract parents"
to ensure that the substrate is prepared on all subcells before
extraction.
to be annotated from a DEF file. This is particularly useful if
"def read" has been used without the "-labels" option, and the
labels are needed at some point.
in github issue #149. This causes magic to no longer write log files
for "make" and "make install" but will properly exit with a non-zero
return code on any error during compile.
Also: Corrected the command "tech drc surround <type1> <type2>" so
that it now returns the correct value when <type1> and <type2> are in
the same plane. Added new command "tech drc directional <type1> <type2>"
which works the same way as "tech drc surround" except for directional
surround rules. Used this to generate vias from "def write" with the
correct metal surround amounts included in the via definiton. The
route analysis then ignores tile slivers that make up the surrounding
material around contacts. Also implemented a method that handles
routes that are made of multiple thin tiles due to the maximum horizontal
stripes rule. Now magic handles "def write" well except for not dealing
with non-minimum-width routes unless they're specifically called out as
"special" nets.
The extSubtree() routine cuts a layout into squares and extracts
each separately, checking for subcell interactions. In each
square it parses all labels looking for unconnected ones. This
section of code not only parses all labels M x N times, but it
then marks interaction areas where there may be none, forcing
additional unnecessary processing. This commit makes the first
quick optimization, which is to change the return value of
DRCFindInteractions() from boolean to integer, allowing it to
return a value indicating that there are no subcells in the
area. This prevents the loop through labels from happening in
cases where there can never be interactions. More to come.
traditionally been kept for backwards compatibility. However, the
operation of "ext2spice" and "ext2sim" as separate programs has
become extremely difficult to maintain, and so it has been dropped
in favor of folding both into the program as commands, as was done
a long time ago in the Tcl/Tk version.
timestamps that are fixed, since the timestamp update routine is
called from too many places, too many times. Instead created a
new cell definition flag indicating a fixed timestamp, which can
be set by "cellname timestamp" for an individual cell, or with
"gds datestamp" for cells read from a GDS file.
the timestamp is updated after reading in CIF or GDS, and managed to
get the timestamp dirty flag to remain clear after reading when
"gds datestamp" is used. This includes a modification of the timestamp
update routine that only updates timestamps on a single file if only a
single file is being written.
"writeall force <cell>" is used but <cell> doesn't exist, and (2)
to add options "writeall modified" and "writeall noupdate" (which
may or may not be useful).
yesterday's commit to allow the syntax "gds maskhints <types>", in
which mask hints can be restricted to a specific list of layers
rather than all layers which define mask hints in the cifoutput
rule.
The website documentation now points to these contents in a clone
of the repository on opencircuitdesign.com, so all future edits of
the command-line documentation will be made directly to the git
repository. Also: Changed the precision of box values printed in
microns from 2 to 3 digits after the decimal place, so that 5 nanometer
grids do not get values clipped in the output.
"gds datestamp <value>" as an option to force a specific datestamp
on the GDS output. This is a third option beyond the previous two
which were either to use the current time or to write zero. The
new option allows an entire library to get a common timestamp, for
example, related to a PDK version number. The "gds nodatestamp"
option has been retained for backwards compatibility.
in a cell to account for the difference between what's in an input
GDS file and what magic would write out itself from the processed
data. This potentially allows library cells to be read in that
will generate the equivalent mask data as output without resorting
to using GDS file references as properties. The method is activated
with the new command option "gds maskhints on" and the default is
off.
If cells are instanced before being defined, causing the GDS parser
to rewind the cell from the top, then the "already defined" error
messages will be suppressed, since it is to be expected that cells
will be seen twice (and ignored the 2nd time). When rewinding, an
output message is issued so that it is clear that the file contains
instances that are used before they are defined, and recommends the
"gds ordering on" setting. Also: Fixed the "gds ordering" command
code so that the command with no third argument returns the state
of the "gds ordering" setting instead of generating a parser error.
node representing the global substrate on cells that are abstract
views. Corrected a typecasting issue in ext2spice.c that throws
a compiler warning. Added another check for a cell being editable
when painting, which is a case that was not covered by the
previous code change to address the same issue.
there was no distinction between a locked file and a new cell
(initial state) before writing to disk. This prevents any new cell
from being saved! Also: Revised the behavior of the "select short"
search, but this still has issues with long run-times on complex
layouts, so this is an ongoing effort.
whenever a process writes a cell to disk, it immediately releases the
file lock it had on that cell, which is clearly not the intent of file
locking. Fixed this issue. On a related topic, revised the "cellname
writeable" command so that it can make a cell editable even if the cell
has an advisory lock and cannot be made writeable. Perhaps there should
be a clearer distinction here between "writeable" and "editable". Also:
Reconsidered the previous commit, which removed the "--disable-locking"
from the configuration options. Because some operating systems may not
implement fnctl()-based file locking (Cygwin, for one, apparently doesn't),
it is still useful to be able to completely remove the function, in case
the operating system will fail to recognize the fnctl() values in the
code. Now, file locking behavior can be permanently removed through the
configuration option, or temporarily disabled from the command line.
CmdRS.c:1269:22: warning: & has lower precedence than ==; == will be evaluated first [-Wparentheses]
DRCtech.c:2573:16: warning: & has lower precedence than !=; != will be evaluated first [-Wparentheses]
this limited ports to 16384, which seemed reasonable at the time.
However, the sky130_sram_macro layouts connect power and ground in a
way that when coupled with "extract unique" can generate tens of
thousands of ports and overrun the bit field, showing that automation
can do the unexpected. The solution was to split out the port number
from the label record as its own 32-bit value.
Tim Edwards
Alessandro De Laurenzis
mrg
Park-Hyung-Joo
Johan Euphrosine
Anton Blanchard
Brad Smith