222 from Sean Cross. Corrected a few places where the blanket
conversion "Region"->"ExtRegion" picked up some comment lines
that were unrelated to the structure name.
contacts) take default values from the DRC section. Since both
are in lambda, but the DRC section uses a two-part integer and
modulus representation, if default values are taken before
scaling, the LEF layers may get rounded values. This has been
solved by marking values with -1 to indicate that they require
defaults, and then set those defaults (from scaled DRC rules)
after scaling all other tech values.
supported). Fixed the long-standing issue in which DRC does not
get stopped by the "drc off" command (the behavior for interrupting
the DRC was dependent on the DRC being turned on, and the "drc off"
command was turning it off before breaking, causing the interrupt
to be ignored).
Alessandro De Laurenzis. That pull request cleaned up the vast
majority of compiler warnings. However, that cleanup exposed a
few additional warnings pointing to errors in the code that needed
fixing. The code now compiles cleanly except for one warning
about redefined CAD_DIR that I have not looked into.
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
Compression levels of the output can be controlled with the "gds
compress [<value>]" command, where <value> 0 (default) is uncompressed
output, 6 is "normal" gzip compression, and 9 is maximum compression.
of systems calls to "gzip" and "gunzip". A compressed GDS file can
be made simply by doing "gds write <name>.gds.gz", and can be read
simply by doing "gds read <name>.gds.gz". Names of compressed files
can be put in the GDS_FILE property of a cell.
a routine that should have been called with a NULL argument, but
instead was called with no argument, making the behavior system-
dependent. Revised the parsing of the "defaultareacap" and
"defaultperimeter" statements in the tech file, such that the short
version of both statements gets automatic handling of the substrate
and isolated substrate areas; this goes back to the recent change
in extraction behavior to redefine the "substrate type" (e.g., pwell)
during extraction as defining isolated substrate areas, and not the
default substrate. The earlier code change dealt with problems
related to extracting nodes and regions, but did not consider how
parasitic capacitance was affected. This commit resolves that issue.
traditionally been kept for backwards compatibility. However, the
operation of "ext2spice" and "ext2sim" as separate programs has
become extremely difficult to maintain, and so it has been dropped
in favor of folding both into the program as commands, as was done
a long time ago in the Tcl/Tk version.
whenever a process writes a cell to disk, it immediately releases the
file lock it had on that cell, which is clearly not the intent of file
locking. Fixed this issue. On a related topic, revised the "cellname
writeable" command so that it can make a cell editable even if the cell
has an advisory lock and cannot be made writeable. Perhaps there should
be a clearer distinction here between "writeable" and "editable". Also:
Reconsidered the previous commit, which removed the "--disable-locking"
from the configuration options. Because some operating systems may not
implement fnctl()-based file locking (Cygwin, for one, apparently doesn't),
it is still useful to be able to completely remove the function, in case
the operating system will fail to recognize the fnctl() values in the
code. Now, file locking behavior can be permanently removed through the
configuration option, or temporarily disabled from the command line.
presented on the command line, then all following arguments are
assumed to be arguments of the script and not additional input
to be processed by magic. This allows arguments to be passed to
scripts passed to magic on the command line.
However, this has not been implemented as it has been observed that
the use of itimer() has a restriction of one timer per process, which
interferes with the three or more uses of the timer within magic. The
timer method will have to be changed to use the POSIX timer_create()
routine, before this will work properly.
If exit is called in a TCL script that is executed at startup, the libc
exit() function is called directly and we don't get a chance to reset
the terminal. We return to the shell with echo off, and have to run
"reset". A simple example:
echo exit > test.tcl
magic -noconsole -dnull test.tcl
There are a few ways we could solve this. We could register an exit
handler using atexit(). Here I use Tcl_SetExitProc() to register a
callback with the TCL interpreter.
tech file format "version" section. This can be used to specify the
version of magic that must be used to be compatible with the tech file.
This effectively supercedes the technology version number. (2) Changed
the behavior of "make" to set the version and revision numbers on doing
"make" instead of "configure". This allows the version to update
correctly after doing a "git pull" followed by "make" without doing
"configure" in between. (3) Fixed a couple of issues that were flagged
as compile-time warnings.
read". While "lef read" normally annotates existing layout, this
option ensures that no additional cells are created from macros in
the input LEF file. (2) Added a check on the "Input off lambda grid"
warning during CIF/GDS input such that it is not repeated once issued,
as it tends to be output many times when it occurs.
Tcl_Alloc() and Tcl_Free() because Tcl_Alloc() uses (unsigned int)
for the argument type and therefore limits memory allocations to
what can fit in 32 bits. Using the system malloc(size_t) should not
cause any issues.
optional name field to the "substrate" line in the extract section
of the techfile. This is the default name of the substrate if not
connected to anything labeled. It may use a Tcl variable (preferred).
(2) Added command option "instance orientation [-def]" that returns
the orientation of the named or selected instance. The -def option
returns the orientation using DEF naming convention; otherwise, the
naming used with "getcell" is generated.
not useful so long as Tcl_Alloc() has (unsigned int) for an argument.
The more important investigation is probably to determine if there is
a way to keep csa2_list from growing to absurdly large sizes on
connectivity checks.
Conflicts:
VERSION
calma/Depend
cif/Depend
cmwind/Depend
commands/Depend
database/Depend
dbwind/Depend
debug/Depend
drc/Depend
ext2sim/Depend
ext2spice/Depend
extflat/Depend
extract/Depend
garouter/Depend
gcr/Depend
graphics/Depend
grouter/Depend
irouter/Depend
lef/Depend
lisp/Depend
mzrouter/Depend
netmenu/Depend
plot/Depend
plow/Depend
resis/Depend
router/Depend
select/Depend
sim/Depend
tcltk/Depend
textio/Depend
tiles/Depend
utils/Depend
windows/Depend
wiring/Depend
Merged recent changes from master branch into bplane branch. Testing the
bplane implementation which has about a 5x improvement in extraction times
for large layouts, which is significant enough to move ahead with the bplane
implementation; however, the bplane implementation has not been thoroughly
vetted yet, so it will remain a branch until such time that it has been
validated.
extraction: Fixed a problem causing long extraction times, at
least some of which had to do with a poor string hash function
implementation. Fixed a huge problem in ext2spice, where the
node merge function was particularly poorly implemented, causing
exponentially increasing processing times with layout size.
Corrected a minor issue with ext2spice where arguments were
improperly specified, causing unnecessary error messages to be
issued. Fixed an error in the "load -dereference" command option,
which again caused unnecessary error messages to be issued.
Changed .gitignore to ignore Depend files, which are now regenerated
on every build.
Conflicts:
VERSION
database/DBcellsrch.c
database/DBconnect.c
extract/ExtInter.c
lef/Depend
utils/Depend
Updated bplane branch with all changes to master since the bplane branch
was last modified.
down in the hierarchy when selecting a region or net, but with a
(hopefully very useful) twist: To avoid the problem of ambiguous
labels in subcells, the subcell name hierarchy is generated in
the same way as is done when flattening a cell, with the instance
name prepended. For example, when selecting a net in a standard
cell design, a terminal would highlight the name "OR2X1_1/B"
instead of just "B".
Johan Euphrosine
Tim Edwards
Sean Cross
Alessandro De Laurenzis
Brad Smith
Anton Blanchard
susinxy
Tim 'mithro' Ansell