is not necessary that the target cell not exist. That allows a
layout to be flattened into a destination in pieces. Also found
that the "flatten" command never frees memory for the CellUse it
creates for the copy, so fixed that as well.
introduced: The use of substitutions for PDKPATH and home directory
in path names for GDS files referenced in abstract views, and the
"gds addendum" option. Both were interfering with magic's handling
of writing GDS files from abstract layout views.
from 98 (arbitrarily selected) to 61 (apparently commonly used by
other tools). This should help increase compatibility with GDS
files output from other tools.
were incorrect assumptions made in the code from 35 years back or so,
for the case where the CIF layer halo is larger than the size/separation
of the cells in the array. The new code will prevent the array routine
from copying hierarchical additions to the mask layers outside of the
array area. Whether or not the new code has its own faulty assumptions
remains to be seen through thorough vetting.
the last commit, unfortunately. Thanks to Matt Guthaus for alerting me
to this. Also updated parts of the extresist code that remove the
dependence on ResConDCS; this is a minor update and should not affect
the operation of extresist. It is preparatory to doing more work to
support additional device types like capacitors, bipolars, and diodes.
the layers2->layers1 swapped case from being implemented; the
surround_ok rule type is by definition asymmetric and the two
layer sets cannot just be swapped.
for loading a cell after displaying an unmodified "(UNNAMED)" cell,
because "(UNNAMED)" will be deleted, leaving the undo record
invalid and causing a crash if it is attempted to be invoked.
recursive loop and crash magic. Corrected a number of other issues
along the way, especially one where routines in EFantenna and extresist
make use of array EFDevTypes which was only created by ext2sim and
ext2spice, and freed when done. Having run extresist through valgrind,
there are still issues in the code.
on loading a layout to avoid doing so with in a suspendall ...
resumeall block. That avoids weird errors occurring when the
PDK toolkit scripts are run to generate a new device layout if
the top level layout is still (UNNAMED) and empty.
checks on non-Manhattan tiles were made only on the straight edges;
this was sufficient for most checks. However, it can miss the case
of facing non-Manhattan edges. This check does not do triggered
rules because there is no non-Manhattan maxwidth algorithm implemented,
and because the triggering clipping area is a triangle and needs an
extension to support it.
area + halo but then failing to limit overlap checks to that clip
area, resulting in bizarre errors whenever an array is made. Not
sure why the error didn't show up more often.
in which if a cell is read from GDS that has the same name as a cell
in memory, then the cell in memory is renamed to keep all cell names
unique in the database.
for sticky labels making connections through the hierarchy. This
is only needed for some annoying layouts that put point-size labels
with no connecting geometry in cells, and causes magic to spent
excessive amounts of time searching through labels for any layout
that has lots of labels.
and HOME substitution in filenames needs to watch for a NULL
cd_file, and (2) The routine that removes the (UNNAMED) cell when
another cell is loaded needs to NULL the boxRootDef pointer or else
it ends up pointing to deallocated memory.
This can be done now by reading a LEF file, followed by reading
a GDS file with the "noduplicates" option set. In addition,
annotation of either the LEF view or a read-only view follows the
same protocol as cell paths in the .mag file, which is to replace
leading path components matching Tcl variables for PDKPATH or
PDKROOT, and replace the home directory path with a tilde.
commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
so that it returns cellnames in "natural sort" alphabetical order
instead of the random order produced by scanning the hash table
of cell names. Since this command is used by the "cell manager"
window code, which was also not doing any sorting, then this fixes
the same issue in the "cell manager".
original view position; this was due to not setting units to
internal before re-applying the previous view position. Also wrapped
most of the "popstack" routine into a suspendall...resumeall block so
that the view is refreshed only once; this is especially important
when popping back into a full chip view.
with the existing documentation) by not requiring the net containing
the two labels to be selected before running the "select short" command.
The command now first checks if the labels exist in the selection, and
if not, the command effectively executes "goto label1 ; select net" and
then continues as previously implemented.
that contain the selected paint. Previously, all cells inside the
area of the selection box would be printed, which is completely
wrong, and can lead unexpectedly to thousands of cell instance
names being printed out.
statement in a .ext file require that all aliases of a node name be
rehashed after a node merge, or else node loops can occur. Also
prevented statements of the form "equiv A A" from being output in
the .ext file, as they are useless.
However, this has not been implemented as it has been observed that
the use of itimer() has a restriction of one timer per process, which
interferes with the three or more uses of the timer within magic. The
timer method will have to be changed to use the POSIX timer_create()
routine, before this will work properly.
extra option "-default" that allows defaults to be set for any
label property other than text or port-related properties.
Subsequently, the command "label <text>" will apply the given
defaults to the label. This allows a simpler way to create
rendered labels from the command line without remembering all of
the arguments to the extended "label" command.
conversion, largely converted from the python script in open_pdks,
which itself was derived from an efabless script, and none of
which have been particularly well tested.
characters. Instead of removing the non-alphanumeric characters, magic
now prepends an "x" to the name. Since this naming restriction does not
necessarily impact, say, LVS, it would probably be better to let this
behavior be enabled or disabled by a command.
The previous behavior was to generate hierarchical names for all
labels when copying contents of subcells. This is "safe" for
copying selections without accidentally shorting things through
labeling, but it can make a mess of the selection. Options are
now "select do labels" for the existing behavior, "select no labels"
to not show any labels, and "select simple labels" to show only the
root name of labels in subcells.
based on the contents of a .mag file being read in, assuming
compatibility with principles of open_pdks. The search paths
are not meddled with unless a file is read for which the technology
cannot be found (and a technology has not already been read, or at
least no database file exists in memory using any technology that
has already been read). If so, then variables PDK_PATH and PDK_ROOT
are searched for in both the shell environment and the local Tcl
environment. Also, if open_pdks has installed PDKs in the path
/usr/share/pdk/, then that path will be searched. If a corresponding
technology file is found, it will be loaded. If the path corresponds
to an open_pdks-style path, then the library paths in libs.ref will
also be added to the search paths for cells.
Tim Edwards