that have been removed by flattening into the parent cell due to lack
of devices. Previously the checks on writing the subcircuit and writing
the call were slightly different, leading to instances in which the
subcircuit call would be written to the netlist output without the
subcircuit being defined. (2) Corrected an error in the "bridge" CIF/GDS
output operator. In certain (somewhat rare) geometries, the tile behind
(instead of in front of) the corner being checked may be incorrectly
flagged as a DRC spacing error. The fix is to ignore tiles that are
behind the corner being checked.
- Don't print error if there is no more data to process
- Fix error message: `propname` already has the
MASKHINTS_ prefix
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
of input cells on a per-cellname basis, using glob-style pattern
matching. This is probably the best way to deal with 3rd-party vendor
GDS with unfortunate practices like dividing devices up among cells in
a hierarchy, even though it comes across as a bit of a hack solution.
extflat code; failure to provide a forward external reference
to EFHNBest() resulted in a failure to correctly evaluate a
boolean expression. That resulted in a failure to merge
hierarchical nodes during ext2spice, resulting in an incorrect
netlist with single nodes broken up into pieces.
one terminal of a device as the substrate, but also specifies
shielding types for the substrate, then the extraction cannot just
assume that a missing terminal is connected to the substrate without
first checking that there are no substrate shielding types under the
device.
Corrected the "lef write -hide" command option so that obstructions
outside of the boundary are included in the obstruction list, in
addition to the block inside. This had previously been done
correctly for use with the "setback" option but would fail only
for setback = 0.
tech file format "version" section. This can be used to specify the
version of magic that must be used to be compatible with the tech file.
This effectively supercedes the technology version number. (2) Changed
the behavior of "make" to set the version and revision numbers on doing
"make" instead of "configure". This allows the version to update
correctly after doing a "git pull" followed by "make" without doing
"configure" in between. (3) Fixed a couple of issues that were flagged
as compile-time warnings.
true, this will force the "gds write" command to write out creation
date stamps as zero. This is very useful for avoiding changing the
contents of an otherwise-unchanged layout, especially if it is in
a git repository where it will force the entire file to be replaced.
and made the default behavior equivalent to "see-vendor". While it is
true that running "cif see" on a readonly cell shows layers that are
not necessarily representative of what is in the file, the opposite
behavior manifests itself in ways that are confusing.
layers that are normally automatically generated to be supplemented
with additional geometry in the form of properties. The first
commit implements a CIF operator "mask-hints" that tells CIFGenLayer
that additional geometry may be specified with a property named
"MASKHINTS_" plus the name passed to the operator as its only
argument. A more extensive commit to be done will allow this
operator to be used on cifinput to use mask hints to retain the
exact geometry of mask layers used in the input file.
to allow a cell to be flushed with dereferencing (i.e., discard any file
path attached to the cell, and use the search paths to find the cell when
it is reloaded).
routine attempts to rescale the contents of the top-level cell after
moving forward in the GDS to find a cell that was used before it was
defined, if reading that cell caused the scale to change. However,
the numerator and denominator were reversed, causing the scaling to
be the inverse of what it should have been.
Ghazy) to read pin uses from a DEF file, including the three types
that are not defined by the LEF format (go figure). Expanded the
bitmask of label flags to include the additional use types. Also
shifted the label flag bitmask up to make additional room for more
port number, as there is no point in having unused bits in the
bitmask.
to allow a "gds read" command to ignore cells in the GDS which already
exist in memory. This allows magic to be "pre-seeded" with specific
views of cells in the GDS. Default is false, which is backwards-
compatble behavior. (2) Changed the behavior of the the way the use
path is written to and read from a .mag file, checking the path prefix
against Tcl variables PDK_PATH, PDKPATH, PDK_ROOT, and PDKROOT, and
replacing any such leading path component with the variable name.
On reading a .mag file, any variable name at the start of the path
that matches a Tcl variable will be substituted.
defMakeInverseLayerMap() from returning complete contact types when used
by the lefWrite command when writing LEF macros, which contain cut layers
but not entire contacts.
for infinities in space tiles by checking tile dimensions against
TiPlaneRect, where in fact TiPlaneRect is slightly smaller than
the plane boundaries, so this check would always fail, causing
unpredictable behavior due to integer overflow.
could have multiple ports of the same name. This problem had been
worked over before, but there was an indpendent mechanism producing
the same result for a completely different reason, caused by subcells
being much larger than the cookie-cutter extraction method's extraction
regions. Solved by tracking port names in a hash table and preventing
re-use. (2) ext2spice was producing "no such node" errors; like (1)
this had been previously worked on, and like (1) this mechanism was
independent. Problem came from not passing -1 to extHierSubstrate for
the non-arrayed dimension of a 1-dimensional array. Also: Removed
the word "fatal" from extraction error reporting, as nearly all
extraction errors are entirely benign. This should clear up confusion
among alarmed end-users.
on cells with multiple ports per pin. As written, the code was
erasing all labels before creating a new port label, which would
erase all previous port labels. This should have been done only on
the first port.
used both for counting cells during GDS write and for saving
geometry data from the "copyup" operator during GDS read. The write
routine does not clear the client record, and the read routine was
checking if the cd_client value was default. Corrected the resulting
crash condition by resetting cd_client before GDS reads. However, the
underlying problem is that the GDS read is reading data into a cell
that already exists in the database, and is not handling it robustly
by renaming the existing cell. So this should be revisited.
occurrence of the label to place the box on. This can be used with
"findlabel -glob <name>" to get a list of labels and determine the
length of the list, and then iterate through each occurrance of the
label in the edit cell.
disagreements between parent and child cells on GDS generation for
templayers, as these layers are not output; any resulting differences
showing up eventually on an output layer will be reported.
bloat-all, that was resetting flags in the entire plane within the
callback for each tile processed. This would push DRC run-times from
minutes to hours. Also corrected another, much more minor, efficiency,
in which the connection mask was generated in the callback routine
for each tile, instead of calculating before the plane search and
passing the mask to the callback function in the client data.
hierarchical processing from CIFGenSubcells() and CIFGenArrays(), and to
avoid certain operators that are useless and harmful when applied
hierarchically; namely squares, slots, bbox, boundary, and net.
the handling of subcell instances generally. Previously it would check
the interaction between neighboring cells in an array without regard to
any material in the parent cell which might remove those errors;
consequently, the array would have to be DRC clean by itself in order for
the parent cell to show as DRC clean. The array check has been moved
inside the DRCInteractionCheck() routine, so that it runs only where
arrayed instances do not interact with anything else. Within interaction
areas, the area is flattened and checked, so the array check is not
needed.
Tim Edwards
Sylvain Munaut
Anton Blanchard