value 1 after finding a substrate connecting type shielded (by deep
nwell, in the example) from the substrate, thus preventing the
search from processing any remaining substrate types. Solved by
changing the return value to zero to keep the search going.
record to the label structure to hold the port number. One major
issue stemming from this was reported in github issue #203 by Anton
Blanchard. This commit fixes that error.
output for transistors. The problem came from a change made to
fix an issue with capacitors marked as floating nodes because some
nodes are not output as source or drain. But those nodes are output
before the parameters, so when generating parameter output, all
nodes appear to have already been output. Solution: Specify an
additional bit in the "visited" mask for the node having been output
that is separate from the mask for resist classes used by the code
that writes parameter values, and use that bit as a test for whether
the node is connected to some device (not necessarily a FET source
or drain).
used by "topVisit" and "subcktVisit" in ext2spice.c, probably
caused by having different names on the same port number, the
subcktVisit() routine was modified to use exactly the same
enumeration as topVisit() so that they are guaranteed to have
the same result.
this limited ports to 16384, which seemed reasonable at the time.
However, the sky130_sram_macro layouts connect power and ground in a
way that when coupled with "extract unique" can generate tens of
thousands of ports and overrun the bit field, showing that automation
can do the unexpected. The solution was to split out the port number
from the label record as its own 32-bit value.
have already been output; i.e., that have EF_PORT set. However,
since EF_PORT is now set on all implicit ports, it is likely that
this part of the code is no longer exercised at all, and may be
removed.
connections through the substrate as the same node, and so will
not force different nodes names on the soft connection to be
unique. This should probably be selectable behavior. However, as
written, the "extract" command will always merge soft connections,
so giving them unique names just causes problems with "extract".
issue at the change made in revision 214. This was done incorrectly
in two ways, one being a set of statements inside an if() block that
should have been executed always, and the other an incorrect use of
the EF_DEVTERM flag, setting it when it should not have been set.
implicit substrate connections under some conditions were not added
to the subcircuit pin list. When this was corrected, the call to
the subcircuit was missing the implicit substrate port. When that
was corrected, the implicit substrate port printed was the subcircuit's
local node name, not the connection from above in the hierarchy. The
underlying problem was that the substrate was marked as a port in a
node record that was in another (flattened and unused) def and so not
seen when enumerating the def's node list. It's possible that the
better solution is that the efNodeHashTable() should be enumerated to
write subcircuit ports, not def->def_nodes. However, now, by using
EFHNLook(), the corresponding entry in efNodeHashTable() is found and
used.
work around the issue of loading a file containing references to
cells with the same name as cells already loaded. This is probably
going to cause additional headaches until a proper checksum method
is implemented.
behave as one would expect; e.g., "cellname self" returns the name
of the currently edited cell if nothing is selected; "cellname
rename <name>" renames the currently edited cell to <name>.
Modified the "extract" command so that it will not extract a cell
named "(UNNAMED)" but will insist that the cell must be given a
proper name, much like the "writeall" command does.
rectangle. Likewise, this also fixes an unexpected result when
doing "spliterase" on a zero-area rectangle (which does not cause
a segfault, but is not what one would want magic to do).
when reading in a .mag file. The routine was not checking for
whether a "use" entry in the file was the first one encountered
or not. The path is only ever given for the first use of any cell
def, so for any cell after the first, the path should have already
been resolved. This fix avoids lots of unnecessary error messages
when reading a file in a different directory. Also, because the
routine now checks for the first use in a file, any error messages
that do occur will only be displayed for the first use, not all of
them.
statements, with all "hard" connections being enumerated in the
same PORT entry, and "soft" connections (same label on unconnected
areas; e.g., through substrate or resistor device) being
enumerated as separate PORT entries, per the LEF spec. Also
corrected behavior with respect to the "lef write -toplayer"
option, which was treating each port label independently, and so
generating entries for lower layers of a port if there were ports
on those layers, in contravention to the "-toplayer" option.
Also: Added the PINS section to the "def write" output; this had
been left as a "to be completed" item but was never done in spite
of being easy to add.
entries for "floating" labels. Otherwise it is possible for the
hierarchical checks to find the label in flattened geometry and
reference it, resulting in merge statements in an .ext file that
reference undeclared nodes, ultimately resulting in extflat
failing to perform the merge, and an incorrect netlist.
to not get into the subcircuit port list during ext2spice. The new
fix brings back (unfortunately) the behavior of creating a substrate
node for cells that have no substrate connection to any device;
this will have to be handled separately.
solution; it would be much better to make the value adjustible, but
the array of tiles sized to LAYERS_PER_CONTACT is a Region structure,
and the routine that frees the Region structures does not have a way
to call a routine to take additional measures like free'ing a sub-
structure of the Region. A proper solution will require some work.
commands on selections in a cell that is not editable. Moves
and Copies were already handled correctly; this correction fixes
Delete and transforms (e.g., rotates and flips).
messages which was traced to code that changes a drivepoint position
to match a label; the same drivepoint may be part of the record for
the initial position to search on the net, in which case if the
position is changed, then the tile type needs to be changed to match
the new position.
using qsort() instead of its own linked-list-based sorting, which
is horribly inefficient. This change allows power nets (which
tend to be connected to all transistors) to be extracted in a
reasonable amount of time (hours instead of days).
an optional extra argument to the "select" command that can be used
to select labels by glob-style matching; e.g., "select area labels
VSS*" or "select less area labels *_1". This will help in managing
labels after flattening a standard cell design; e.g., by using
"select less area labels */VDD".
to eliminate all redundant names resulting from redundant labels.
Changed the behavior of "goto" so that it will find local names with
slashes, which are the result of using "flatten". A hierarchical
search is done first, as before, but on failure to find a subcell
component, the local cell is searched for the verbatim name.
specific nets to extract, rather than excluding them. That allows
"extresist" to target specific nets like the power supply or a clock
tree for extraction.
wrong, and it needs revisiting. This is the cause of a number of
negative capacitances appearing in the netlist (even after accounting
for overlap with subcircuits).
all geometry will be handled; the previous behavior expected only
a single rectangle per pin and so would only acknowledge the last
entry in any list of rectangles for the pin.
actually an issue and probably never relevant. extresist now works
except for substrate connections and soft connections between substrate
regions. That will require additional coding, not bugfixing, so I'm
committing the last of this set of bugfixes before starting that.
"ext2sim extresist on", which was being shared; that leads to
confusion, especially when using "ext2sim" to generate a node
name input file for "extresist". Also: Added a warning when two
ports are merged in a .ext file, as this can lead to numerous
incorrect entries in netlist output.
text formatting. Made one critical correction to ResGetDevice() to
pass the device type; otherwise, devices on different planes (e.g.,
MiM caps) with the same coordinate will always return the device on
the lowest plane, leading to incorrect results and an eventual crash
when the device record is free'd twice.
support of devices with terminals on different plances, such as
capacitors, diodes, and bipolar transistors. Output now appears
to give meaningful results for flattened layouts, although
numerous issues remain for hierarchical layouts.
to be scaled twice when using the "extract style" command and with an
extraction style that uses micron units. The microns-to-internal
units conversion expects an unscaled result when calling
CIFGetOutputScale(), but except when loading a tech file for the
first time, this value is scaled, and causes the double scaling.
Fixed by unscaling the CIF output before reloading the extraction
style, then scaling it afterward.
to copy up errors from non-interacting subcells. The routine was
only copying up TT_ERROR_P type errors, but for deep hierarchies,
TT_ERROR_S type errors may have to be propagated up as well.
require that an edit cell be defined. This stops a lot of commands
from failing on non-writeable cells. There really should not be a
concept of "non-editable" cells at all, just non-writeable ones.
"|"), pointed out by Jim Everitt. The error is pretty major, but
because the section of code it affects is just eliminating
unnecessary DRC rules, I believe that the only effect is that the
DRC ruleset ends up using more memory than it needs to. But, good
to have fixed.
it is easy to subvert the process by updating GDS without updating
the pointers, it is trivial to end up with bad GDS output. The
sanity checks confirm that the position pointed to is a complete
structure (check begin and end records), and that it has the same
name as the cell (this is not a requirement, as there are reasons
one might want to point to data from a structure of a different
name, but a warning will be printed).
that can be used to force renaming of a read-only cell. The
action revokes the read-only status of the cell and removes any
GDS filename and pointers from the cell's properties. This can be
used to swap out a library cell in a layout for a custom version,
by first forcing a rename of the cell, and then resetting the
filepath of the cell and flushing.
tile corners in the check area to find areas needing bridges.
This prevents generation of unnecessary bridging geometry; and
since the error made the check rotation-dependent, this may
resolve some "parent and child disagree on CIF" errors.
necessarily a 1:1 correspondence from tile types to extracted
device names, and not necessarily a 1:1 correspondence in the other
direction, either. So the search for devices at the location given
by the .sim file has been loosened to look for any tile type at that
location. Matches are restricted to those in which the plane of the
type found is the same as the plane of the device recorded in the .sim
file; this prevents matching device like MiM caps that may be in the
same location as a device in another plane.
very long time but never discovered; in which any implicit port
connection into a subcell (that is otherwise labeled with ports) that
appears at the end of the node list (i.e., after all the declared
ports), will not be output, either in the subcircuit definition or
calls.
presented on the command line, then all following arguments are
assumed to be arguments of the script and not additional input
to be processed by magic. This allows arguments to be passed to
scripts passed to magic on the command line.
is not necessary that the target cell not exist. That allows a
layout to be flattened into a destination in pieces. Also found
that the "flatten" command never frees memory for the CellUse it
creates for the copy, so fixed that as well.
introduced: The use of substitutions for PDKPATH and home directory
in path names for GDS files referenced in abstract views, and the
"gds addendum" option. Both were interfering with magic's handling
of writing GDS files from abstract layout views.
from 98 (arbitrarily selected) to 61 (apparently commonly used by
other tools). This should help increase compatibility with GDS
files output from other tools.
were incorrect assumptions made in the code from 35 years back or so,
for the case where the CIF layer halo is larger than the size/separation
of the cells in the array. The new code will prevent the array routine
from copying hierarchical additions to the mask layers outside of the
array area. Whether or not the new code has its own faulty assumptions
remains to be seen through thorough vetting.
the last commit, unfortunately. Thanks to Matt Guthaus for alerting me
to this. Also updated parts of the extresist code that remove the
dependence on ResConDCS; this is a minor update and should not affect
the operation of extresist. It is preparatory to doing more work to
support additional device types like capacitors, bipolars, and diodes.
the layers2->layers1 swapped case from being implemented; the
surround_ok rule type is by definition asymmetric and the two
layer sets cannot just be swapped.
for loading a cell after displaying an unmodified "(UNNAMED)" cell,
because "(UNNAMED)" will be deleted, leaving the undo record
invalid and causing a crash if it is attempted to be invoked.
recursive loop and crash magic. Corrected a number of other issues
along the way, especially one where routines in EFantenna and extresist
make use of array EFDevTypes which was only created by ext2sim and
ext2spice, and freed when done. Having run extresist through valgrind,
there are still issues in the code.
on loading a layout to avoid doing so with in a suspendall ...
resumeall block. That avoids weird errors occurring when the
PDK toolkit scripts are run to generate a new device layout if
the top level layout is still (UNNAMED) and empty.
checks on non-Manhattan tiles were made only on the straight edges;
this was sufficient for most checks. However, it can miss the case
of facing non-Manhattan edges. This check does not do triggered
rules because there is no non-Manhattan maxwidth algorithm implemented,
and because the triggering clipping area is a triangle and needs an
extension to support it.
area + halo but then failing to limit overlap checks to that clip
area, resulting in bizarre errors whenever an array is made. Not
sure why the error didn't show up more often.
in which if a cell is read from GDS that has the same name as a cell
in memory, then the cell in memory is renamed to keep all cell names
unique in the database.
for sticky labels making connections through the hierarchy. This
is only needed for some annoying layouts that put point-size labels
with no connecting geometry in cells, and causes magic to spent
excessive amounts of time searching through labels for any layout
that has lots of labels.
and HOME substitution in filenames needs to watch for a NULL
cd_file, and (2) The routine that removes the (UNNAMED) cell when
another cell is loaded needs to NULL the boxRootDef pointer or else
it ends up pointing to deallocated memory.
This can be done now by reading a LEF file, followed by reading
a GDS file with the "noduplicates" option set. In addition,
annotation of either the LEF view or a read-only view follows the
same protocol as cell paths in the .mag file, which is to replace
leading path components matching Tcl variables for PDKPATH or
PDKROOT, and replace the home directory path with a tilde.
commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
so that it returns cellnames in "natural sort" alphabetical order
instead of the random order produced by scanning the hash table
of cell names. Since this command is used by the "cell manager"
window code, which was also not doing any sorting, then this fixes
the same issue in the "cell manager".
original view position; this was due to not setting units to
internal before re-applying the previous view position. Also wrapped
most of the "popstack" routine into a suspendall...resumeall block so
that the view is refreshed only once; this is especially important
when popping back into a full chip view.
Tim Edwards