device extraction working, and also resolved an unrelated error
in "getnode" and another unrelated error reading "resist" values
from the tech file "extract" section.
involving searches on split tile areas, including one very
important check for interaction between split tiles during
hierarchical extraction. There is still something wrong in
the hierarchical extraction, but it could be the last remaining
issue.
the extraction, especially for routines like ExtFindNeighbors where
it was previously not handled at all. A new method was introduced
in which split tiles with neither side TT_SPACE will get an extra
allocated structure that contains pointers to two regions representing
the nodes on the tile's left and right sides, independently. The fix
(as yet not fully tested) should resolve problems with extracting the
sky130 I/O cells, which contain a FET with 45 degree angles on the
gate, where a split tile is divided between the gate and the source or
drain, and therefore represents two different nodes. Also, there were
extraction errors related to incorrect handling of split tiles having
only one node, where a split tile became connected to the wrong node.
and forcing it to be passed as an argument to all the callback
functions for the search routines that require it. Magic now
compiles and runs with the new code, but there are a number of
known issues that need to be fixed up. Committing now so that
I can rebase on the last update to the master branch.
The compiler has started to error on casting int* to fd_set*
Since WASM build has presense of fd_set then the ifdef have been
switched away from the legacy (pre 2000) method.
We make a copy of readonly string on function entry and use that instead.
strrchr() is a bit of an annoying API, takes const char* but returns char*
but it is the same string. One for static analysis or C++.
SimSelectArea() argument unused.
This encapsulates the expectation the 'fd' is in the permitted range for
the standard sizes 'fd_set'.
This is so there is some form of detection with issues in this area, if
the RLIMIT_NOFILE limit is increased.
All naked access to `ti_client` now uses the function-like-macro
to encapsulate this action. This macro existed before this just
makes all sites utilize it.
Added additional INT and PTR variants to remove the programmer
load on thinking about casing and casts polluting the point
of use. So the use now looks cleaner.
Equivalent prototypes:
void TiSetClient(Tile*, ClientData)
void TiSetClientINT(Tile*, intptr_t) /* pointertype */
void TiSetClientPTR(Tile*, void*)
ClientData TiGetClient(Tile*)
intptr_t TiGetClientINT(Tile*) /* pointertype */
void *TiGetClientPTR(Tile*)
This is a complete guess based on function parameter types and the locallity of the 'pNum' value.
This error predates the 2017 Initial Commit git history.
Copilot Autofix rejected: extEnumTilePerim(tile, devptr->exts_deviceSDTypes[i],
SimTransTerms, (ClientData) &transistor, (ClientData) NULL );
CodeQL: https://github.com/dlmiles/magic/security/code-scanning/26
previous behavior that had inadvertently been changed. In recent
versions, "load <absolute_path> -dereference" would incorrectly
apply the dereferencing to <absolute_path> rather than just its
subcells. Cleaned up the code around DBCellRead() in the process,
so everything is more straightforward (although probably more
could be done in that regard).
dereferencing, and making the behavior of "load" on the command
line (i.e., loading a cell from a file) the same as the
behavior of loading a cell as a result of expanding an unloaded
instance. In both cases, if "load -dereference" is used, and
a cell does not exist in any search path but does exist in the
original location, without dereferencing, then the cell will be
loaded from the original location. Also: Corrected an error
that has existed since adding the capability to read compressed
files, which causes magic to crash when attempting to run the
"crash recover" command (because that routine was mixing
compressed and regular file stream calls).
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
Conflicts:
VERSION
calma/Depend
cif/Depend
cmwind/Depend
commands/Depend
database/Depend
dbwind/Depend
debug/Depend
drc/Depend
ext2sim/Depend
ext2spice/Depend
extflat/Depend
extract/Depend
garouter/Depend
gcr/Depend
graphics/Depend
grouter/Depend
irouter/Depend
lef/Depend
lisp/Depend
mzrouter/Depend
netmenu/Depend
plot/Depend
plow/Depend
resis/Depend
router/Depend
select/Depend
sim/Depend
tcltk/Depend
textio/Depend
tiles/Depend
utils/Depend
windows/Depend
wiring/Depend
Merged recent changes from master branch into bplane branch. Testing the
bplane implementation which has about a 5x improvement in extraction times
for large layouts, which is significant enough to move ahead with the bplane
implementation; however, the bplane implementation has not been thoroughly
vetted yet, so it will remain a branch until such time that it has been
validated.
Conflicts:
VERSION
database/DBcellsrch.c
database/DBconnect.c
extract/ExtInter.c
lef/Depend
utils/Depend
Updated bplane branch with all changes to master since the bplane branch
was last modified.
only at the time of running the command "load". But cells are generally
loaded only on an as-needed basis, so the dereferencing option must be
saved as a flag in the cell and honored whenever its subcells are expanded
or otherwise read at a later time.
rid of redundant port entries in subcircuits. There is still an outstanding
issue as to whether nodes and connections need to be recursively iterated
to the hierarchy bottom. The current fix corrected the test case. Also,
added a "-dereference" option to the "load" command to revert to the
original behavior of using only search paths from "addpath" when searching
for files to load.
to be more robust and not depend on the ordering of the devices in
the techfile. The extraction method now keeps a mask of which
properties of the device (source/drain types, substrate type,
identifier type) have been found, and will look only for device
records that match what is known about the device. Added a device
identifier record which is the last record before parameters if the
record begins with "+". This allows marker layers to be placed
over a device such that it will extract with a different type.
This helps reduce the complexity of the techfile and allows
certain specialized devices like RF or ESD to be identified without
a separate layer type for the device.
R. Timothy Edwards
Darryl L. Miles
Johan Euphrosine
Sean Cross
Alessandro De Laurenzis