order of layers than specified in the LEF/DEF spec. It is not clear
whether this is common practice, or a bug in the tool that produced the
DEF file that prompted this change. NOTE: The "grow" function applied
in this case should be replaced by the actual GDS input rule sequence,
that includes the grow and shrink merge. Otherwise, vias read from
DEF files do not match the layout from those read from GDS, even though
the mask layers represented by the layouts are the same.
distributed installations, where the immediate installation location
is different from the final installation location, but in the case
where it is not desirable to put the entire install hierarchy as a
subdirectory of DESTDIR.
views. Because the abstract view does not necessarily represent
actual connectivity, rely on the port indexes in the .ext file
to determine the number of ports and port order. Do not use
SpiceNodeName() to look up the node name, or unique ports that
are deemed shorted will go missing. Also: Modified the read-in
of .ext files so that use names may contain backslashes. Only
backslashes that end a line will be handled differently.
the right argument type (float, not int). Otherwise all resistances
from extresist come out zero when doing "ext2spice extresist on"
and "ext2spice hierarchy on". Also changed the format of the resistance
in the SPICE output to type float, since values are in standard units of
ohms, and rounding to the nearest ohm seems excessively coarse-grained.
I understand the problem, which is that nodes are ordered according
to precedence of EFHNBest() within a circuit, but there is no
concept of ordering between circuits. So ports end up listing nodes
in arbitrary order, and the only way to resolve the order is to use
EFHNBest() as is done within a subcircuit. Appears to work for
different edge cases tested.
ports, to avoid creating ports for node names that are redundant.
It would probably be better to avoid creating the redundant node
names in the first place; however, I am less certain why these
are generated. The incorrect additional ports all have hierarchical
names in the cell, which is a sign that they are incorrect, as the
cell itself should not have any parents. The level of certainty
about this fix is definitely not 100%, but it was tested on a
hierarchical analog design, and setting levels of parasitic caps
caused new nodes to appear in subcircuits and in no cases did
information appear to be lost.
with ext2spice without the hierarchy option. More work needed to
produce correct hierarchical output and to support extraction
devices other than the old "fet" record.
the below-threshold coupling caps being removed from the hierarchy,
added code to suppress the error message when it is clearly related
to a below-threshold cap that has been removed.
used with "ext2spice hierarchy on" because the device index is not
reset between calls to output cells in the hierarchy, leading to
a mismatch of the index for all cells after the first one output.
device type so that it is now properly backwards compatible with
the old-style "fet" records. Also corrected the record matching
such that it properly matches according to the number of terminals
while allowing the traditional interpretation that there may be
fewer S/D type records than terminals if the S/D types are the
same for all terminals.
function was used (HashFind, which never returns NULL, vs.
HashLookOnly, which does) resulting in a failure to solve the
problem which was being patched, which was ext2spice crashing
when cell arrays are present, which itself was due to allowing
brackets in base cell use names.
use name (not part of an array in magic). This was failing in
ext2spice due to code in extflat dealing incorrectly with the
array delimiters. The correction fixes the problem but leaves
the possibility that there could be a conflict between a use
name that is an array and a use name that has the array index
as part of the name.
while reading DEF. To preserve names as much as possible, such
names are now kept. To avoid problems, EFbuild.c and ext2hier
behavior has been changed to only parse entries in a .ext file as
instance arrays if the array notation follows the specific syntax
of [ax:bx:cx][ay:by:cy], letting all other uses of brackets pass
through unaffected.
the compiler. Some are obscure functions (plot verstatec hasn't
been used in years) but others (like SPICE distributed junctions)
are potentially significant sources of unexpected crashes on
systems that don't zero uninitialized memory.
64 because I overran the 64 array with too many resistclasses in
a techfile. This really should be dynamically allocated; this
requires parsing the line to count tokens and reallocating as
needed (to be done).
a scaling issue in extract) which was caused by the addition of
hierarchical netlist generation. Finding hierarchical connections
requires finding instances by name, so it is vastly better to create a
hash table of instances instead of a linked list.
name-to-number mapping used for the HSPICE format between
subcircuits. Otherwise, subcircuits with the same instance ID
remain in the table and may cause nodes to be output with a name
that collides with other names in the same subcircuit. This only
affects output in HSPICE format.
all the settings normally used for LVS (hierarchy on, cthresh
infinite, subcircuit top auto, etc.). (2) Extract and extract
unique ignore cells marked as abstract views (property LEFview
is set) when checking for unconnected nets with the same name
label.
added a long time ago, since capacitors use a different method for
calculating width and length than either transistors or resistors,
so subcircuits need a special class designator or else the extraction
may calculate the wrong dimensions for device width by totalling the
perimeter between the device and terminal types, as it would for a
MOSFET.
cause a crash. Corrected the implementation as well as implemented
an option for "subcircuit top auto" that generates a subcircuit
header or not depending on the presence or absense of ports in the
top level cell.
development had been halted since it was first created back in April.
Version 8.2 is now the official development version, with the first
development push to create a Cairo graphics interface.
Tim Edwards