specific nets to extract, rather than excluding them. That allows
"extresist" to target specific nets like the power supply or a clock
tree for extraction.
wrong, and it needs revisiting. This is the cause of a number of
negative capacitances appearing in the netlist (even after accounting
for overlap with subcircuits).
all geometry will be handled; the previous behavior expected only
a single rectangle per pin and so would only acknowledge the last
entry in any list of rectangles for the pin.
actually an issue and probably never relevant. extresist now works
except for substrate connections and soft connections between substrate
regions. That will require additional coding, not bugfixing, so I'm
committing the last of this set of bugfixes before starting that.
"ext2sim extresist on", which was being shared; that leads to
confusion, especially when using "ext2sim" to generate a node
name input file for "extresist". Also: Added a warning when two
ports are merged in a .ext file, as this can lead to numerous
incorrect entries in netlist output.
text formatting. Made one critical correction to ResGetDevice() to
pass the device type; otherwise, devices on different planes (e.g.,
MiM caps) with the same coordinate will always return the device on
the lowest plane, leading to incorrect results and an eventual crash
when the device record is free'd twice.
support of devices with terminals on different plances, such as
capacitors, diodes, and bipolar transistors. Output now appears
to give meaningful results for flattened layouts, although
numerous issues remain for hierarchical layouts.
to be scaled twice when using the "extract style" command and with an
extraction style that uses micron units. The microns-to-internal
units conversion expects an unscaled result when calling
CIFGetOutputScale(), but except when loading a tech file for the
first time, this value is scaled, and causes the double scaling.
Fixed by unscaling the CIF output before reloading the extraction
style, then scaling it afterward.
to copy up errors from non-interacting subcells. The routine was
only copying up TT_ERROR_P type errors, but for deep hierarchies,
TT_ERROR_S type errors may have to be propagated up as well.
require that an edit cell be defined. This stops a lot of commands
from failing on non-writeable cells. There really should not be a
concept of "non-editable" cells at all, just non-writeable ones.
"|"), pointed out by Jim Everitt. The error is pretty major, but
because the section of code it affects is just eliminating
unnecessary DRC rules, I believe that the only effect is that the
DRC ruleset ends up using more memory than it needs to. But, good
to have fixed.
it is easy to subvert the process by updating GDS without updating
the pointers, it is trivial to end up with bad GDS output. The
sanity checks confirm that the position pointed to is a complete
structure (check begin and end records), and that it has the same
name as the cell (this is not a requirement, as there are reasons
one might want to point to data from a structure of a different
name, but a warning will be printed).
that can be used to force renaming of a read-only cell. The
action revokes the read-only status of the cell and removes any
GDS filename and pointers from the cell's properties. This can be
used to swap out a library cell in a layout for a custom version,
by first forcing a rename of the cell, and then resetting the
filepath of the cell and flushing.
tile corners in the check area to find areas needing bridges.
This prevents generation of unnecessary bridging geometry; and
since the error made the check rotation-dependent, this may
resolve some "parent and child disagree on CIF" errors.
necessarily a 1:1 correspondence from tile types to extracted
device names, and not necessarily a 1:1 correspondence in the other
direction, either. So the search for devices at the location given
by the .sim file has been loosened to look for any tile type at that
location. Matches are restricted to those in which the plane of the
type found is the same as the plane of the device recorded in the .sim
file; this prevents matching device like MiM caps that may be in the
same location as a device in another plane.
very long time but never discovered; in which any implicit port
connection into a subcell (that is otherwise labeled with ports) that
appears at the end of the node list (i.e., after all the declared
ports), will not be output, either in the subcircuit definition or
calls.
presented on the command line, then all following arguments are
assumed to be arguments of the script and not additional input
to be processed by magic. This allows arguments to be passed to
scripts passed to magic on the command line.
is not necessary that the target cell not exist. That allows a
layout to be flattened into a destination in pieces. Also found
that the "flatten" command never frees memory for the CellUse it
creates for the copy, so fixed that as well.
introduced: The use of substitutions for PDKPATH and home directory
in path names for GDS files referenced in abstract views, and the
"gds addendum" option. Both were interfering with magic's handling
of writing GDS files from abstract layout views.
from 98 (arbitrarily selected) to 61 (apparently commonly used by
other tools). This should help increase compatibility with GDS
files output from other tools.
were incorrect assumptions made in the code from 35 years back or so,
for the case where the CIF layer halo is larger than the size/separation
of the cells in the array. The new code will prevent the array routine
from copying hierarchical additions to the mask layers outside of the
array area. Whether or not the new code has its own faulty assumptions
remains to be seen through thorough vetting.
the last commit, unfortunately. Thanks to Matt Guthaus for alerting me
to this. Also updated parts of the extresist code that remove the
dependence on ResConDCS; this is a minor update and should not affect
the operation of extresist. It is preparatory to doing more work to
support additional device types like capacitors, bipolars, and diodes.
the layers2->layers1 swapped case from being implemented; the
surround_ok rule type is by definition asymmetric and the two
layer sets cannot just be swapped.
for loading a cell after displaying an unmodified "(UNNAMED)" cell,
because "(UNNAMED)" will be deleted, leaving the undo record
invalid and causing a crash if it is attempted to be invoked.
recursive loop and crash magic. Corrected a number of other issues
along the way, especially one where routines in EFantenna and extresist
make use of array EFDevTypes which was only created by ext2sim and
ext2spice, and freed when done. Having run extresist through valgrind,
there are still issues in the code.
on loading a layout to avoid doing so with in a suspendall ...
resumeall block. That avoids weird errors occurring when the
PDK toolkit scripts are run to generate a new device layout if
the top level layout is still (UNNAMED) and empty.
Tim Edwards