GDS_FILE property in the same way that it handles changes to the
FIXED_BBOX property, by setting or clearing the associated flag
bit in the cell. Otherwise, it becomes impossible to make a
cell writeable, as it always has some belief that it is still
attached to a specific GDS file. Corrected an error in the
"gds" ("calma") command parsing that switched the callbacks for
the "noduplicates" and "nodatestamp" options.
of an instance with double-escaped brackets if the instance name
contains brackets. This then undermines the use of the backslash
escape and causes the interpreter to raise an error instead of
printing the name.
it as a single value "flags" (unsigned char) with meaningful flag
names. Added new option "-fail" to the load command to allow
magic to fail on loading a cell that does not have a corresponding
file rather than the default action of creating a new cell. Added
a flag for the "-quiet" option so that behavior on "-fail" can be
done quietly.
magic database derived layout of a cell that declares GDS_FILE
but for which the GDS file referenced cannot be found or read.
This will produce an incomplete GDS file instead of an apparently
good and complete GDS file that actually contains bad data. Also:
Added new command "random" that allows a random seed to be set,
for use with the GDS output when writing a full dump of a GDS
file. Otherwise, the output prefixes are always the same, which
defeats the purpose of adding the random prefix.
to stop the search whenever a cell is not found. Used this to implement
a new option for GDS writes, "gds undefined allow|disallow" (default
"disallow") controls whether or not GDS with undefined references will
be allowed to be written. Similarly affects CIF and LEF writes, extraction,
and DRC (when running "drc check" from the top).
restricted to its original intent, which is to replace the long name
formed from the plane short name and the "minfinity" coordinate.
This avoids issues with conflicting substrate names derived from a
real layer such as pwell. Also, the global substrate node name now
returns the variable name without the "$" in front if the variable
has not been set to anything. This avoids potential syntax errors
in the netlist.
of input cells on a per-cellname basis, using glob-style pattern
matching. This is probably the best way to deal with 3rd-party vendor
GDS with unfortunate practices like dividing devices up among cells in
a hierarchy, even though it comes across as a bit of a hack solution.
tech file format "version" section. This can be used to specify the
version of magic that must be used to be compatible with the tech file.
This effectively supercedes the technology version number. (2) Changed
the behavior of "make" to set the version and revision numbers on doing
"make" instead of "configure". This allows the version to update
correctly after doing a "git pull" followed by "make" without doing
"configure" in between. (3) Fixed a couple of issues that were flagged
as compile-time warnings.
true, this will force the "gds write" command to write out creation
date stamps as zero. This is very useful for avoiding changing the
contents of an otherwise-unchanged layout, especially if it is in
a git repository where it will force the entire file to be replaced.
to allow a cell to be flushed with dereferencing (i.e., discard any file
path attached to the cell, and use the search paths to find the cell when
it is reloaded).
to allow a "gds read" command to ignore cells in the GDS which already
exist in memory. This allows magic to be "pre-seeded" with specific
views of cells in the GDS. Default is false, which is backwards-
compatble behavior. (2) Changed the behavior of the the way the use
path is written to and read from a .mag file, checking the path prefix
against Tcl variables PDK_PATH, PDKPATH, PDK_ROOT, and PDKROOT, and
replacing any such leading path component with the variable name.
On reading a .mag file, any variable name at the start of the path
that matches a Tcl variable will be substituted.
could have multiple ports of the same name. This problem had been
worked over before, but there was an indpendent mechanism producing
the same result for a completely different reason, caused by subcells
being much larger than the cookie-cutter extraction method's extraction
regions. Solved by tracking port names in a hash table and preventing
re-use. (2) ext2spice was producing "no such node" errors; like (1)
this had been previously worked on, and like (1) this mechanism was
independent. Problem came from not passing -1 to extHierSubstrate for
the non-arrayed dimension of a 1-dimensional array. Also: Removed
the word "fatal" from extraction error reporting, as nearly all
extraction errors are entirely benign. This should clear up confusion
among alarmed end-users.
used both for counting cells during GDS write and for saving
geometry data from the "copyup" operator during GDS read. The write
routine does not clear the client record, and the read routine was
checking if the cd_client value was default. Corrected the resulting
crash condition by resetting cd_client before GDS reads. However, the
underlying problem is that the GDS read is reading data into a cell
that already exists in the database, and is not handling it robustly
by renaming the existing cell. So this should be revisited.
occurrence of the label to place the box on. This can be used with
"findlabel -glob <name>" to get a list of labels and determine the
length of the list, and then iterate through each occurrance of the
label in the edit cell.
unique" code. It was using DBEraseLabelsByContent() which would
erase all matching labels, and could potentially erase labels that
were still remaining on the list being processed, causing a segfault.
Also corrected minor errors identified by valgrind during debugging
the above-referenced problem.
Instead of a 6-character suffix generated randomly, the 6-character
suffix is generated by a hash algorithm from the device parameters.
If the cell parameters are changed, then the cell itself changes.
If the instance name was default (derived from the cell name) then
the instance name changes accordingly. The result is that there
cannot be two (auto-)generated cells with the same parameters but
with different cell names.
from the layout window. The main reason for this is to keep the
box out of the image when doing "plot svg". The "plot" command was
also modified to always do a plot of the entire cell in the active
layout window if the box is not present.
bounding box of the selection (somewhat unuseful, especially as the
result gets absorbed by the tag callback), and "box select", which
sets the cursor box to the bounding box of the selection (much more
useful). Also corrected the "port" command so that the command
"port make" will search only for non-port labels.
command when annotating an existing layout from a LEF database, if
there is a port in the layout that is shadowed by a label with the
same name that is not a port.
easier to scan through a cell's ports. Used that capability in the
"readspice" script to handle case sensitivity problems, and to find
labels that are not ports and force them to be ports to match the
reference netlist.
caption line in the GUI window, which was causing problems with
long filenames overrunning the string array dedicated to the caption
line. Thanks to Sylvain Munaut for the patch.
forces all ports in a cell to be reordered in alphabetical order,
which ensures that the output of "extract" is always the same
(apart from coupling capacitance, which still ends up in randomized
order due to the use of hashing based on memory address followed
by iterating through the hash table).
could cause serious errors on systems that do not auto-zero allocated
memory. Also: Fixed an error introduced by a recent commit to allocate
character memory for efReadLine() which frees the memory before reading
a .res.ext file, causing a crash when using "ext2spice" with the
"extresist on" option.
optional name field to the "substrate" line in the extract section
of the techfile. This is the default name of the substrate if not
connected to anything labeled. It may use a Tcl variable (preferred).
(2) Added command option "instance orientation [-def]" that returns
the orientation of the named or selected instance. The -def option
returns the orientation using DEF naming convention; otherwise, the
naming used with "getcell" is generated.
argument as a pointer but also set the same variable to the
return value. This is ambiguous, because the behavior depends on
whether the value being set upon return is the original value or
the reallocated value. The result is system-dependent behavior.
SPICE subcircuit definitions from a netlist file and apply the port
order in the netlist to the port labels in the corresponding cell
or cells in the magic database. Also: Corrected an error in the
bloat-all code introduced in a recent commit that can cause a
segfault.
Conflicts:
VERSION
Merged recent changes from master back into bplane, as the efficiency of
bplane for doing extraction on large layouts is unquestionably better.
Fixed the implementation of DBMoveCell() for bplane. Corrected an error
in the bplane version of dbScaleCell() that enumerates cell uses but
does not free the list.
coordinate system origin to the specified (current) location.
This is a much more efficient method than selecting everything in
a layout and moving it, especially for very large layouts where
selection and moving becomes prohibitive.
Conflicts:
VERSION
calma/Depend
cif/Depend
cmwind/Depend
commands/Depend
database/Depend
dbwind/Depend
debug/Depend
drc/Depend
ext2sim/Depend
ext2spice/Depend
extflat/Depend
extract/Depend
garouter/Depend
gcr/Depend
graphics/Depend
grouter/Depend
irouter/Depend
lef/Depend
lisp/Depend
mzrouter/Depend
netmenu/Depend
plot/Depend
plow/Depend
resis/Depend
router/Depend
select/Depend
sim/Depend
tcltk/Depend
textio/Depend
tiles/Depend
utils/Depend
windows/Depend
wiring/Depend
Merged recent changes from master branch into bplane branch. Testing the
bplane implementation which has about a 5x improvement in extraction times
for large layouts, which is significant enough to move ahead with the bplane
implementation; however, the bplane implementation has not been thoroughly
vetted yet, so it will remain a branch until such time that it has been
validated.
Tim Edwards