with ext2spice without the hierarchy option. More work needed to
produce correct hierarchical output and to support extraction
devices other than the old "fet" record.
it only complains about (i.e., issues an error message) ports with
the same index but different text, indicating a read port number
collision and a true error.
the below-threshold coupling caps being removed from the hierarchy,
added code to suppress the error message when it is clearly related
to a below-threshold cap that has been removed.
used with "ext2spice hierarchy on" because the device index is not
reset between calls to output cells in the hierarchy, leading to
a mismatch of the index for all cells after the first one output.
checks. Added new command "antennacheck" and a routine that
adds feedback entries where violations are found. Extended the
syntax of the extraction section of the techfile to support the
antenna ratios and antenna calculation methods.
simple FET device in extresist. Also: Extended the bloat-all CIF operator
again, allowing the trigger layer for the bloat operation to include both
CIF layers and magic layers (previously only magic layers were supported).
This extension is possible due to the previous extension allowing the
trigger layer and bloating layers to be on separate planes. This operator
extension is useful for tagging geometry that is in the proximity of, but
not overlapping, geometry on another plane.
error whenever there are no DRC-CIF rules in the techfile. The
same error will be raised anyway when reading the techfile if
DRC-CIF rules are declared without a style being specified.
to be scaled down by "reducer" like all other values in the cell.
Suggests a need to have property types other than string, so that
a property type "rect" or "box" can be declared that is saved as a
Rect and always scales without special hack handling of the specific
string FIXED_BBOX. . .
reduction of memory and startup time, which was to maintain only
one CIF style in memory. The new method is just to read in and
keep the DRC CIF style separately from the output CIF style.
Because the CIF sections of the techfile are read before the DRC
sections, and the CIF DRC style is declared in the DRC section,
the CIF DRC style is read in on the fly during the first DRC
checking.
hierarchical cells (namely a scaling issue with .sim file units).
More can be done to make the extresist command more user friendly,
but at least port connections as drivers appears to work.
perimeter were not output because of recent code that broke the
routine that assigns the resistance classes to devices. This is
now fixed. Thanks to Dan Moore for bringing this to my attention,
and debugging investigations.
device type so that it is now properly backwards compatible with
the old-style "fet" records. Also corrected the record matching
such that it properly matches according to the number of terminals
while allowing the traditional interpretation that there may be
fewer S/D type records than terminals if the S/D types are the
same for all terminals.
function was used (HashFind, which never returns NULL, vs.
HashLookOnly, which does) resulting in a failure to solve the
problem which was being patched, which was ext2spice crashing
when cell arrays are present, which itself was due to allowing
brackets in base cell use names.
use name (not part of an array in magic). This was failing in
ext2spice due to code in extflat dealing incorrectly with the
array delimiters. The correction fixes the problem but leaves
the possibility that there could be a conflict between a use
name that is an array and a use name that has the array index
as part of the name.
the forward-referenced GDS cell problem) in which when writing cells
from 3rd-party GDS, the structure names are written to GDS with the
indicator flag in front, making the structure names and the referenced
names different, so that the GDS file is no longer valid. This has
been fixed.
principle layer name, which should not happen (especially in the
case of space, where layers may be aliased to "space" to make them
ignored on input). Also: Implemented a "-<types>" option to the
"substrate" record in the techfile to declare types which shield
layers from the substrate. This allows types like pwell to be used
in different contexts, e.g., as part of the substrate, or as a P-well
in deep N-well, without requiring a different type. This works in
conjunction with the recently-implemented "+<types>" ID types for
devices. All of this may seem unnecessary but helps to reduce the
number of layers needing to be defined, and the subsequent complexity
of the DRC rulesets.
files that have forward references (cells that are instanced before
they are defined), resulting in those cells being given an undefined
string for a prefix, which will result in corrupted GDS output.
Also added a method to prevent forward-referenced cells from triggering
a "redundantly defined" error message when the structure is output.
a cell instance name not related to an array moved a variable that
was used later in the routine to the inside of an if block,
effectively making that variable undefined in most cases.
handles diodes or other devices with source/drain on planes other
than the plane of the device type. This no longer requires that
the non-connecting type be in any given terminal position. The
device type boundary is surveyed for all types, connecting or
overlapping, and at least one of each required type must be present.
format with multiple devices per magic tile type. The code was left
incompatible with diodes defined with one terminal as substrate
(and therefore no source/drain-like types connecting to the device
type). This has been fixed.
item that was never properly validated. Corrected the root of the
problem, which was an attempt to deallocate memory that had never
been allocated in the first place.
commit, found that DBTreeFindUse fails to find such uses because
it strips the array delimiters off the name. Fixed the routine
although the routine really should be checking if the use is a
1- or 2- dimensional array and stripping off only the components
expected. The current code will probably fail for cell uses
that have brackets in the name AND are arrayed. Fortunately
this search routine does not appear to be used frequently or in
any critical database functions like netlisting.
all types specified in the "substrate" statement, split such types
into those on the declared well plane, and everything else. Any
types on the well plane are searched as before. Types not on the
well plane (e.g., psd on active) are searched and added to the
substrate node *only* if overlapping nothing on the well plane.
This allows a type such as "psd" to be used on, e.g., both space
(substrate) and deep pwell, but only be extracted as part of the
substrate when found over space. Note that if there is NO
implicit substrate, the substrate connections will always be
found through the usual connection rules.
to be more robust and not depend on the ordering of the devices in
the techfile. The extraction method now keeps a mask of which
properties of the device (source/drain types, substrate type,
identifier type) have been found, and will look only for device
records that match what is known about the device. Added a device
identifier record which is the last record before parameters if the
record begins with "+". This allows marker layers to be placed
over a device such that it will extract with a different type.
This helps reduce the complexity of the techfile and allows
certain specialized devices like RF or ESD to be identified without
a separate layer type for the device.
was previously (and erroneously) lumped with PLACED and FIXED which
take a position argument afterward. Note that this fix allows the
DEF file to be read without error but does not have the (presumably
desired) behavior of parsing SITE information from the LEF file and
ROWS information from the DEF file and giving each unplaced component
an arbitrary but legal position. That would require a significant
amount of additional coding work.
while reading DEF. To preserve names as much as possible, such
names are now kept. To avoid problems, EFbuild.c and ext2hier
behavior has been changed to only parse entries in a .ext file as
instance arrays if the array notation follows the specific syntax
of [ax:bx:cx][ay:by:cy], letting all other uses of brackets pass
through unaffected.
instead created a dependency on database.h for compiling any
source file. This should (I hope) avoid conflicts when running
"make" with the "-j" option for parallel compilation.
Tim Edwards
Roman-Parise