This can be done now by reading a LEF file, followed by reading
a GDS file with the "noduplicates" option set. In addition,
annotation of either the LEF view or a read-only view follows the
same protocol as cell paths in the .mag file, which is to replace
leading path components matching Tcl variables for PDKPATH or
PDKROOT, and replace the home directory path with a tilde.
commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
for saving on a cell which is completely unmodified. One of these
was due to the BPlane implementation, which forces an instance to be
deleted and re-placed on a bounding box recomputation, which should
not, in that case, be considered a modification. Another always runs
DRC on a subcell upon reading rather than relying on any checkplane
entries in the file itself; and the last one marking the timestamp
as modified stemming from an attempt to correct an O(N^2) check to
O(N). All three cases have now been corrected.
one is an "off_grid" DRC type, which can be used to check geometry
that is below the manufacturing grid. Normally magic prevents the
grid from being subdivided below the manufacturing grid, but this
limit can be removed and replaced by DRC checks to check for such
errors in a GDS file of unknown origin. The second version looks
for interactions between subcells that end up with intersections
of non-manhattan geometry landing on points that are not on the
database internal grid. Such errors cannot be seen by magic's DRC
engine by definition, and so must be detected while flattening
geometry for the DRC checks.
to stop the search whenever a cell is not found. Used this to implement
a new option for GDS writes, "gds undefined allow|disallow" (default
"disallow") controls whether or not GDS with undefined references will
be allowed to be written. Similarly affects CIF and LEF writes, extraction,
and DRC (when running "drc check" from the top).
Ghazy) to read pin uses from a DEF file, including the three types
that are not defined by the LEF format (go figure). Expanded the
bitmask of label flags to include the additional use types. Also
shifted the label flag bitmask up to make additional room for more
port number, as there is no point in having unused bits in the
bitmask.
unique" code. It was using DBEraseLabelsByContent() which would
erase all matching labels, and could potentially erase labels that
were still remaining on the list being processed, causing a segfault.
Also corrected minor errors identified by valgrind during debugging
the above-referenced problem.
Instead of a 6-character suffix generated randomly, the 6-character
suffix is generated by a hash algorithm from the device parameters.
If the cell parameters are changed, then the cell itself changes.
If the instance name was default (derived from the cell name) then
the instance name changes accordingly. The result is that there
cannot be two (auto-)generated cells with the same parameters but
with different cell names.
could cause serious errors on systems that do not auto-zero allocated
memory. Also: Fixed an error introduced by a recent commit to allocate
character memory for efReadLine() which frees the memory before reading
a .res.ext file, causing a crash when using "ext2spice" with the
"extresist on" option.
optional name field to the "substrate" line in the extract section
of the techfile. This is the default name of the substrate if not
connected to anything labeled. It may use a Tcl variable (preferred).
(2) Added command option "instance orientation [-def]" that returns
the orientation of the named or selected instance. The -def option
returns the orientation using DEF naming convention; otherwise, the
naming used with "getcell" is generated.
substrate more than once for the same subcell, since the substrate
extraction method scans the entire plane area; this was making
large standard cell layouts extract very slowly, as every component
cell was causing the substrate search to be repeated.
Conflicts:
VERSION
database/DBcellsrch.c
database/DBconnect.c
extract/ExtInter.c
lef/Depend
utils/Depend
Updated bplane branch with all changes to master since the bplane branch
was last modified.
flag definition had been put in database.h instead of database.h.in,
and so was deleted on "make clean". Also, corrected a problem that
causes the cif output style to be lost when running DRC-CIF checks
if the first output style is the DRC style.
development had been halted since it was first created back in April.
Version 8.2 is now the official development version, with the first
development push to create a Cairo graphics interface.
Tim Edwards