argument, which is supposed to flatten all selected instances.
After flattening, instead of deleting the instance from the
cell, it deleted the instance from the selection, leaving the
one in the cell.
warning messages about ports being electrically connected when
those ports have names that match under rules of case-insensitivity,
and the .ext file is being read for the purpose of generating a
SPICE netlist, which is case-insensitive. Also: Corrected a crash
condition when using "extract path <name>" when directory <name>
does not exist.
become truncated, causing the "About" menu item in the console
to generate an error message. Since the tkcon.tcl used in my
other software packages like IRSIM was correct, I just pulled
the RCS string from there, and it seems to be okay now. This
solves github issue #259.
of command logging, which caused the "select cell <instance>" command
option to become invalid; this command option is used by the
parameterized cell generator and makes it impossible to edit the
parameterized cells.
and would keep files open (even though they were not marked as
locked) and not close them, causing an open file descriptor overflow
when too many files are read for the same design.
meaning of the MAG record in GDS files. Most available GDS
documentation is decidedly vague about what MAG means. Most
layout tools seem to interpret a MAG of 1 as corresponding to a
text height of 1um. However, there are a few tools that
interpret it as 1 centimicron, and there's no reason to assume
that any given interpretation is correct. "gds magscale" allows
the scale to be redefined.
"pick x y" which acts like "cursor", but operates on a database
coordinate instead of a pointer coordinate. Made a few other
corrections to the command logging code so that it produces
valid output when the log file is sourced.
commands that make use of the pointer position have an equivalent
command that operates solely on layout coordinates, or otherwise
avoids needing a pointer position. Added the command option
"down <instance>" to avoid using the pointer to disambiguate
selections. Added the command option "select ... at x y" to
do paint or cell selections at a specific coordinate instead of
the pointer position.
of the "edit" command that takes an instance name as an argument.
This is the first of a small series of command extensions to
provide the capability to replace any command that is dependent on
the pointer position with an equivalent command that is not, for
the purpose of removing pointer and screen coordinate dependencies
from the log file created by "logcommands".
the assumption of case insensitivity (e.g., VSS, Vss, and vss)
are kept separate even when writing SPICE netlists, which are
case insensitive. The code fix both avoids flagging these ports
when running ext2spice, and more importantly, allows the use of
"ext2spice short" without these ports ending up separate in the
output netlist.
to be declared for each device model, so that different models can
be specified for different parameter ranges. For example, this
will simplify the definition of the high-sheet-rho poly resistors
and the bipolar transistors in sky130 by removing the need for ID
marker layers; it also allows the correct device model to be
extracted when reading data from GDS that does not contain the
extra (and not foundry-approved) ID markers.
nets to be avoided for running antenna gate and diffusion area
checks when doing "lef write", which is to check if the pin of
the net is flagged with use "power" or use "ground". This avoids
the need to use the (recently added) "lef nocheck" option (although
that still exists as an additional way to control which nets do and
do not get checked).
been broken ever since moving to the Tcl/Tk wrapped version. Added
some new features that allow background commands from the window
handling (like pointer tracking) to be omitted from the log file
via a suspend/resume function. Added a header file and a few
commands at the top of the log file that align the log file contents
with the screen and box state at the start of logging. This makes
a log file which can be "played back" by sourcing it from the magic
console prompt. Per request from Harald Pretl.
list for output, but that the code in ExtRegion.c does not sort a
region's label list to keep ports at the beginning of the list. So
any net with multiple labels may end up with a non-port label as
the name of the node, which eventually becomes the name of the port.
A quick fix keeps these lists sorted.
"drc printrules". Implemented a new "drc" command option called
"drc ignore", which can be used to suppress reporting of specific
rules, for both "drc why" and "drc find". This can help with
finding an error buried among a large number of other errors.
be output twice for scaled devices (such as diodes in the sky130
process). Above and beyond the typo, though, the implementation
of offsets is not very well thought out and needs to be revised.
For one, the +/- notation can be confused with signs in the
parameter expression; that is also fixed in this commit. But
there is currently no way to express both a scale and an offset
for a device parameter.
'+' and '-' in the same way that '*' is currently used for specifying
a parameter scaling. The combination of a scale and offset for the
same parameter has not (yet) been implemented.
with "extract do local" now being equivalent to "extract path .".
This allows extraction files to be put in a subdirectory and not
clog up the current working directory. Also: Fixed some behavior
around the use of "ext2spice -p <path>" so that it (1) works, and
(2) is compatible with the new "extract path". Since the ext2spice
and ext2sim commands are effectively independent of the primary
extraction, the "-p" option is needed to correspond to the use of
"extract path". Hopefully this is seen as only a minor inconvenience.
from ext2spice due to "equiv" statements in the .ext file. The
algorithm was not properly keeping the port as the preferred
name of the node, resulting in the non-preferred name being
used instead of the port name in the output. This would happen
only if there was a label on a net that had a different name than
the port name. The error became much more prevalent after changing
the extract behavior to make "extract do aliases" default. Also
fixed a somewhat related minor error in which magic would print an
error message about ports being shorted together on the same kind
of net where both a port and a (different) label were attached to
the net. Since the non-port label is not a preferred name, then
there should be no warning message. The warning is only intended
for cases where two (or more) ports are truly shorted together.
to create a list of net names to ignore for antenna gate and
diffusion area checks. This allows the nets not to have to be
selected in their entirity but selected by chunk only. This
reduces the time to write LEF on a large layout back to approximately
what it was before the change to include the hidden area from "-hide"
in the antenna area checks. Plus, it greatly reduces the time to
generate LEF for large layouts when not using the "-hide" option.
perimeter are not initialized, and if a terminal perimeter/area
calculation is missed (which is happening on devices with terminals
in planes other than the plane of the identifying type), then the
perimeter/area of a previously handled device will get output.
(2) Corrected an error with "flatten -inplace" in which the command
fails to deal with instance arrays.
NaN results for devices which are not FETs (specifically, devices
that are declared using "msubckt" but are not FETs, although there
may have been a related issue with non-FET devices not getting the
correct M count), due to the device having zero measured width or
length. NOTE: This may need more investigation. If a subcircuit
device's method of merging cannot be understood, then such devices
should never extract with "merge aggressive", and should always
merge conservatively if and only if all parameters match.
when reading .ext files with "equiv" statements in them. The
generation of "equiv" statements was expanded recently, making it
more likely for this issue to show up. There may be devices in
a file that have a terminal node pointing to the node that gets
removed, and these must be updated to point to the node that
remains after merging. This requires a full loop over all
devices and so could have a potentially large impact; but in
general there are not many equiv statements (implying multiple
different labels attached to the same node) and so it is unlikely
that there would be a noticeable performance hit in practice.
gate and diffusion area on each pin is done before erasing parts
of the cell that are to be hidden by obstruction layers. That
preserves the antenna information even when "-hide" is used. This
corrects the issue raised by Kareem Farid in the github issue
tracker #236.
"space" is considered part of the substrate, then the check for
planes to search should exclude "space" from the type mask
first. Otherwise, all planes get searched, not just the substrate.
Also: The same routine can falsely flag a device terminal as
substrate if a split tile is marked as the device's region. This
was also fixed.
previous behavior that had inadvertently been changed. In recent
versions, "load <absolute_path> -dereference" would incorrectly
apply the dereferencing to <absolute_path> rather than just its
subcells. Cleaned up the code around DBCellRead() in the process,
so everything is more straightforward (although probably more
could be done in that regard).
of the cell. This will greatly help in diagnosing issues when
reading cells from multiple locations including cwd, relative
paths, PDK libraries, and the search path. Also: Reworked
the timestamp update message so that it prints all at once at
the end of processing, not printing output for every cell
processed as it is being processed. That prevents output from
the file read routine from getting interleaved with the
timestamp processing output.
labels that are not connected to their declared layers. It's the
latter type that need additional processing in ExtSubtree.
Limiting this processing significantly cuts down on processing
time when there are many labels in a layout, as happens with the
"def read -labels" command option.
encountered an issue where a label in a flattened layout
exceeded 256 characters, ended up in the .sim file, and was
truncated when read back during "extresist". The change to 1024
is a stop-gap measure because ultimately I want to replace the
use of .sim files with .ext files using the routines in extflat/,
which would deprecate everything in ResReadSim.c.
can result in negative resistors due to integer overflow. In all
cases, the target was floating-point and it was only necessary to
recast everything to float first.
partitioning of unshielded areas reaching outward from any given
edge, caused by using a boundary value in the 2nd recursion call
that had been modified for the 1st recursion call and so was no
longer valid.
Tim Edwards
Johan Euphrosine
Brad Smith