manhattan shapes (especially minimum-sized ones) to be eliminated,
as these can survive a shrink-grow operation intended to get rid
of such shapes. This implementation may not be in its final form
but should suffice for now.
new CIF operator is used in a tech file. Reworked yesterday's
commit to add more related operators, so there are now four new
ones (also renamed them): interacting, noninteracting, overlapping,
and nonoverlapping. "interacting" now means overlapping or touching;
so the four cases allow all variations of adjacency between the two
material types.
regions of a given type and retains only those regions which
interact with (overlap) another given type. Both sets of types
can be either magic database types or CIF temp layers. This will
allow the implementation of rules that were not previously
possible.
The data types CIFPath and CIFReadStyle are part of CIFread.h
and all users outside include CIFread.h already.
K&R obsolete syntax removal for C23 compatibility series
tech file to correct the underlying problem with the SkyWater
sky130 process in which a different layer/purpose pair is used
for TEXTTYPE and DATATYPE for the same layer. Previously, all
output from magic writes the same pair for both when writing a
port label. The new method preserves existing syntax, although
there are some differences based on what order the "port"
statement appears relative to other types for the same layer.
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
values in a mask hints property, and added back the handling of
mask hints in the top level cell, since the hierarchical function
on cells does not apply the function to the top level.
and made the default behavior equivalent to "see-vendor". While it is
true that running "cif see" on a readonly cell shows layers that are
not necessarily representative of what is in the file, the opposite
behavior manifests itself in ways that are confusing.
layers that are normally automatically generated to be supplemented
with additional geometry in the form of properties. The first
commit implements a CIF operator "mask-hints" that tells CIFGenLayer
that additional geometry may be specified with a property named
"MASKHINTS_" plus the name passed to the operator as its only
argument. A more extensive commit to be done will allow this
operator to be used on cifinput to use mask hints to retain the
exact geometry of mask layers used in the input file.
The new CIF operator BRIDGE-LIM is similar to the BRIDGE operator with the difference that the material created to meet the minimum spacing/width rules do not overlap the limiting layers. Syntax of the new operator is:
bridge-lim spacing width layers
where "layers" are the limiting layers.
generation in the "cifoutput" section of the techfile. This operator
solves the problems with the catecorner position of geometry when
attempting to automatically close up gaps between islands of a layer.
SPICE subcircuit definitions from a netlist file and apply the port
order in the netlist to the port labels in the corresponding cell
or cells in the magic database. Also: Corrected an error in the
bloat-all code introduced in a recent commit that can cause a
segfault.
templayers. This permits some useful interactions like growing to
the size of a bounding box, or abutment box, as well as many other
possibilities. Also: Corrected the use of "cif see" for the boundary
(abutment box) layer, which was not working because the "cif see"
command uses a flattened CellDef that does not have the boundary
property of the cell it was flattened from.
limit of the Calma definition, and probably has not done so for ages.
Nobody informed me of this. The restriction has been lifted from
GDS input and output in Magic. It can be reinstated if necessary by
setting a flag in the cifoutput section of the techfile, but it is
likely that this will not be necessary unless there are other tools
that enforce the limit and will not read a GDS file that exceeds it.
which takes the existing generated CIF plane, finds all enclosed
areas that have an area less than <area>, and fills them in. This
satisfies a minimum hole area rule in a way that is not possible
with any of the existing CIF operators.
which adds an offset value of "start" to both X and Y from the
lower left corner of the fill area. This allows the use of the
"offset" (from the previous git commit) to be declared on different
layers without creating an exact overlap, as is often required by
foundries for fill patterns.
reduction of memory and startup time, which was to maintain only
one CIF style in memory. The new method is just to read in and
keep the DRC CIF style separately from the output CIF style.
Because the CIF sections of the techfile are read before the DRC
sections, and the CIF DRC style is declared in the DRC section,
the CIF DRC style is read in on the fly during the first DRC
checking.
option "labels ... cellid" to handle some vendor files where
apparently to get around the 30-character cell name limit, the
actual cellname is encoded on a text layer. Added new cifop
"boundary" (no arguments) for cases where a cell abutment box
is encoded on a GDS layer; this now translates the bounding
box to the FIXED_BBOX property, as is done with the LEF bounding
box. Also corrected the property set function to free existing
property value allocated memory when overwriting a property with
a new value.
"port" and "noport" in the cifoutput section to distinguish
between layer:purpose pairs for port text vs. other kinds of
text. This allows a closer correspondence between GDS read and
write. Note that the port writing is currently only in the GDS
write routine, not in the CIF routine.
Darryl L. Miles
R. Timothy Edwards
Alessandro De Laurenzis
fabian-l-c