restricted to its original intent, which is to replace the long name
formed from the plane short name and the "minfinity" coordinate.
This avoids issues with conflicting substrate names derived from a
real layer such as pwell. Also, the global substrate node name now
returns the variable name without the "$" in front if the variable
has not been set to anything. This avoids potential syntax errors
in the netlist.
that have been removed by flattening into the parent cell due to lack
of devices. Previously the checks on writing the subcircuit and writing
the call were slightly different, leading to instances in which the
subcircuit call would be written to the netlist output without the
subcircuit being defined. (2) Corrected an error in the "bridge" CIF/GDS
output operator. In certain (somewhat rare) geometries, the tile behind
(instead of in front of) the corner being checked may be incorrectly
flagged as a DRC spacing error. The fix is to ignore tiles that are
behind the corner being checked.
of input cells on a per-cellname basis, using glob-style pattern
matching. This is probably the best way to deal with 3rd-party vendor
GDS with unfortunate practices like dividing devices up among cells in
a hierarchy, even though it comes across as a bit of a hack solution.
one terminal of a device as the substrate, but also specifies
shielding types for the substrate, then the extraction cannot just
assume that a missing terminal is connected to the substrate without
first checking that there are no substrate shielding types under the
device.
Corrected the "lef write -hide" command option so that obstructions
outside of the boundary are included in the obstruction list, in
addition to the block inside. This had previously been done
correctly for use with the "setback" option but would fail only
for setback = 0.
tech file format "version" section. This can be used to specify the
version of magic that must be used to be compatible with the tech file.
This effectively supercedes the technology version number. (2) Changed
the behavior of "make" to set the version and revision numbers on doing
"make" instead of "configure". This allows the version to update
correctly after doing a "git pull" followed by "make" without doing
"configure" in between. (3) Fixed a couple of issues that were flagged
as compile-time warnings.
true, this will force the "gds write" command to write out creation
date stamps as zero. This is very useful for avoiding changing the
contents of an otherwise-unchanged layout, especially if it is in
a git repository where it will force the entire file to be replaced.
layers that are normally automatically generated to be supplemented
with additional geometry in the form of properties. The first
commit implements a CIF operator "mask-hints" that tells CIFGenLayer
that additional geometry may be specified with a property named
"MASKHINTS_" plus the name passed to the operator as its only
argument. A more extensive commit to be done will allow this
operator to be used on cifinput to use mask hints to retain the
exact geometry of mask layers used in the input file.
to allow a cell to be flushed with dereferencing (i.e., discard any file
path attached to the cell, and use the search paths to find the cell when
it is reloaded).
routine attempts to rescale the contents of the top-level cell after
moving forward in the GDS to find a cell that was used before it was
defined, if reading that cell caused the scale to change. However,
the numerator and denominator were reversed, causing the scaling to
be the inverse of what it should have been.
Ghazy) to read pin uses from a DEF file, including the three types
that are not defined by the LEF format (go figure). Expanded the
bitmask of label flags to include the additional use types. Also
shifted the label flag bitmask up to make additional room for more
port number, as there is no point in having unused bits in the
bitmask.
could have multiple ports of the same name. This problem had been
worked over before, but there was an indpendent mechanism producing
the same result for a completely different reason, caused by subcells
being much larger than the cookie-cutter extraction method's extraction
regions. Solved by tracking port names in a hash table and preventing
re-use. (2) ext2spice was producing "no such node" errors; like (1)
this had been previously worked on, and like (1) this mechanism was
independent. Problem came from not passing -1 to extHierSubstrate for
the non-arrayed dimension of a 1-dimensional array. Also: Removed
the word "fatal" from extraction error reporting, as nearly all
extraction errors are entirely benign. This should clear up confusion
among alarmed end-users.
occurrence of the label to place the box on. This can be used with
"findlabel -glob <name>" to get a list of labels and determine the
length of the list, and then iterate through each occurrance of the
label in the edit cell.
disagreements between parent and child cells on GDS generation for
templayers, as these layers are not output; any resulting differences
showing up eventually on an output layer will be reported.
bloat-all, that was resetting flags in the entire plane within the
callback for each tile processed. This would push DRC run-times from
minutes to hours. Also corrected another, much more minor, efficiency,
in which the connection mask was generated in the callback routine
for each tile, instead of calculating before the plane search and
passing the mask to the callback function in the client data.
hierarchical processing from CIFGenSubcells() and CIFGenArrays(), and to
avoid certain operators that are useless and harmful when applied
hierarchically; namely squares, slots, bbox, boundary, and net.
the handling of subcell instances generally. Previously it would check
the interaction between neighboring cells in an array without regard to
any material in the parent cell which might remove those errors;
consequently, the array would have to be DRC clean by itself in order for
the parent cell to show as DRC clean. The array check has been moved
inside the DRCInteractionCheck() routine, so that it runs only where
arrayed instances do not interact with anything else. Within interaction
areas, the area is flattened and checked, so the array check is not
needed.
unique" code. It was using DBEraseLabelsByContent() which would
erase all matching labels, and could potentially erase labels that
were still remaining on the list being processed, causing a segfault.
Also corrected minor errors identified by valgrind during debugging
the above-referenced problem.
Instead of a 6-character suffix generated randomly, the 6-character
suffix is generated by a hash algorithm from the device parameters.
If the cell parameters are changed, then the cell itself changes.
If the instance name was default (derived from the cell name) then
the instance name changes accordingly. The result is that there
cannot be two (auto-)generated cells with the same parameters but
with different cell names.
which was failing to clear tiles in the layout of the "processed" state,
leading to unpredicatable results if the same layout layer is used in
a subsequent CIF operation.
from child cells, which was incorrectly descending all the way down
into the hierarchy; not only can this produce the incorrect result
but it also wastes time searching cells that don't need to be
searched.
are interpreted in the dimensions used in the cifoutput section rather
than always in centimicrons (otherwise, rules at, say, 5nm cannot be
represented in the DRC section).
read". While "lef read" normally annotates existing layout, this
option ensures that no additional cells are created from macros in
the input LEF file. (2) Added a check on the "Input off lambda grid"
warning during CIF/GDS input such that it is not repeated once issued,
as it tends to be output many times when it occurs.
Tim Edwards