swapDrainSource moved into a function to encapsulate swap-related tasks; area parameters swapped according to the D/S attributes; SPICE attribute comment printf moved to the end of export function as it allows to add more device types

ext2spice/ext2hier.c

@@ -439,6 +439,8 @@ subcktHierVisit(use, hierName, is_top)
 	return subcktVisit(use, hierName, is_top);
 }
 
+extern void swapDrainSource();
+
 /*
  * ----------------------------------------------------------------------------
  *
@@ -516,8 +518,7 @@ spcdevHierVisit(hc, dev, scale)
                 (dev->dev_terms[2].dterm_attrs &&
                 !strcmp(dev->dev_terms[2].dterm_attrs, "S")))
         {
-            drain = &dev->dev_terms[1];
+            swapDrainSource(dev, &source, &drain);
-            source = &dev->dev_terms[2];
         }
         else
             drain = &dev->dev_terms[2];
@@ -666,12 +667,12 @@ spcdevHierVisit(hc, dev, scale)
 	    break;
 
 	case DEV_MSUBCKT:
-	    /* msubcircuit is "Xnnn source gate [drain [sub]]]"		*/
+	    /* msubcircuit is "Xnnn drain gate [source [sub]]]"		*/
 	    /* to more conveniently handle situations where MOSFETs	*/
 	    /* are modeled by subcircuits with the same pin ordering.	*/
 
 	    spcdevOutNode(hc->hc_hierName,
-			source->dterm_node->efnode_name->efnn_hier,
+			drain->dterm_node->efnode_name->efnn_hier,
 			"subckt", esSpiceF);
 
 	    /* Drop through to below (no break statement) */
@@ -693,15 +694,21 @@ spcdevHierVisit(hc, dev, scale)
 	    /* except that the "gate" node is treated as an identifier	*/
 	    /* only and is not output.					*/
 
-	    if ((dev->dev_nterm > 1) && (dev->dev_class != DEV_MSUBCKT))
+        if (dev->dev_class != DEV_MSUBCKT)
-		spcdevOutNode(hc->hc_hierName,
+	    {
-			source->dterm_node->efnode_name->efnn_hier,
+		if (dev->dev_nterm > 1)
-			"subckt", esSpiceF);
+		    spcdevOutNode(hc->hc_hierName, source->dterm_node->efnode_name->efnn_hier,
-	    if (dev->dev_nterm > 2)
+				"subckt", esSpiceF);
-		spcdevOutNode(hc->hc_hierName,
+		if (dev->dev_nterm > 2)
-			drain->dterm_node->efnode_name->efnn_hier,
+		    spcdevOutNode(hc->hc_hierName, drain->dterm_node->efnode_name->efnn_hier,
-			"subckt", esSpiceF);
+				"subckt", esSpiceF);
-
+	    }
+	    else    /* class DEV_MSUBCKT */
+	    {
+		if (dev->dev_nterm > 2)
+		    spcdevOutNode(hc->hc_hierName, source->dterm_node->efnode_name->efnn_hier,
+				"subckt", esSpiceF);
+	    }
 	    /* The following only applies to DEV_SUBCKT*, which may define as	*/
 	    /* many terminal types as it wants.					*/
 
@@ -979,20 +986,27 @@ spcdevHierVisit(hc, dev, scale)
 		else
 		    fprintf(esSpiceF, "asub=0 psub=0");
 	    }
+    }
     
-	    /* Now output attributes, if present */
+    /* Output attributes, if present - it looks more convenient here, as other device types may be added */
-	    if (!esNoAttrs)
+    switch (dev->dev_class)
-	    {
+    {
-		if (gate->dterm_attrs || source->dterm_attrs || drain->dterm_attrs)
+        case DEV_FET:
-		    fprintf(esSpiceF,"\n**devattr");
+	    case DEV_MOSFET:
-		if (gate->dterm_attrs)
+	    case DEV_ASYMMETRIC:
-		    fprintf(esSpiceF, " g=%s", gate->dterm_attrs);
+        case DEV_MSUBCKT:
-		if (source->dterm_attrs)
+	        if (!esNoAttrs)
-		    fprintf(esSpiceF, " s=%s", source->dterm_attrs);
+	        {
-		if (drain->dterm_attrs)
+		    if (gate->dterm_attrs || source->dterm_attrs || drain->dterm_attrs)
-		    fprintf(esSpiceF, " d=%s", drain->dterm_attrs);
+		        fprintf(esSpiceF,"\n**devattr");
-	    }
+		    if (gate->dterm_attrs)
-	    break;
+		        fprintf(esSpiceF, " g=%s", gate->dterm_attrs);
+		    if (source->dterm_attrs)
+		        fprintf(esSpiceF, " s=%s", source->dterm_attrs);
+		    if (drain->dterm_attrs)
+		        fprintf(esSpiceF, " d=%s", drain->dterm_attrs);
+	        }
+	        break;
     }
     fprintf(esSpiceF, "\n");
     return 0;

ext2spice/ext2spice.c

@@ -2184,6 +2184,51 @@ getCurDevMult()
     return (esFMult && (esFMIndex > 0)) ? esFMult[esFMIndex-1] : (float)1.0;
 }
 
+
+/* 
+ * swapDrainSource
+ * 
+ * Swap drain and source ordering and the related stuff
+ * including the drain/source area parameters
+ * 
+ * This is typycally called if any terminal is marked with attribute "D" or "S"
+ * (label "D$" or "S$" at poly-diffusion interface),
+ * then swap order of source and drain compared to the default ordering.	
+ *
+ */
+void
+swapDrainSource(dev, source, drain) 
+    Dev *dev;
+    DevTerm **source, **drain;
+{
+    DevParam *plist;
+    
+    /* swap drain/source ordering */
+    *drain = &dev->dev_terms[1];
+    *source = &dev->dev_terms[2];
+    
+    /* swap drain/source-related parameters */
+    plist = efGetDeviceParams(EFDevTypes[dev->dev_type]);
+    while (plist != NULL)
+    {
+        TxPrintf("  * param: %s; type: %c%c\n", plist->parm_name, plist->parm_type[0], plist->parm_type[1]);
+        
+        /* swap drain/source parameters only */
+        if (!(strcmp(plist->parm_name, "as")) || !(strcmp(plist->parm_name, "ps")))
+        {
+            plist->parm_type[1] = '0' + 2;
+        }
+        else if (!(strcmp(plist->parm_name, "ad")) || !(strcmp(plist->parm_name, "pd")))
+        {
+            plist->parm_type[1] = '0' + 1;
+        }
+        
+        /* move pointer */
+        plist = plist->parm_next;
+    }
+}
+
+
 /*
  * ----------------------------------------------------------------------------
  *
@@ -2263,8 +2308,8 @@ spcdevVisit(dev, hc, scale, trans)
 		(dev->dev_terms[2].dterm_attrs &&
 		!strcmp(dev->dev_terms[2].dterm_attrs, "S")))
 	{
-	    drain = &dev->dev_terms[1];
+	    /* If D/S should be swapped, also parameters must be swapped */
-	    source = &dev->dev_terms[2];
+        swapDrainSource(dev, &source, &drain);
 	}
 	else
 	    drain = &dev->dev_terms[2];