Merge ea79698f15 into 8b010d61d2

This is for the edge processor / polygon generator:
The algorithm tries to find a better place
for hooking stitch lines for holes in
"resolve_holes" mode.

src/db/db/dbPolygonGenerators.cc

@@ -413,6 +413,8 @@ PolygonGenerator::begin_scanline (db::Coord y)
   m_open_pos = m_open.begin ();
   m_y = y;
 
+  m_prev_stitch_index = std::numeric_limits<size_t>::max ();
+
 #ifdef DEBUG_POLYGON_GENERATOR
   printf ("m_open=");
   for (open_map_type::const_iterator o = m_open.begin (); o != m_open.end (); ++o) {
@@ -823,30 +825,71 @@ PolygonGenerator::join_contours (db::Coord x)
         tl_assert (c1.size () >= 2);
 
         PGPolyContour::iterator ins = cprev.end ();
-        db::Coord xprev = 0;
-        db::Edge eprev;
 
-#if 1
+        PGPolyContour::iterator ii = ins;
+        --ii;
+        PGPolyContour::iterator iii = ii;
+        --iii;
+
         //  shallow analysis: insert the cutline at the end of the sequence - this may
         //  cut lines collinear with contour edges
 
-        eprev = db::Edge (*(ins - 2), *(ins - 1));
-        xprev = db::coord_traits<db::Coord>::rounded (edge_xaty (db::Edge (*(ins - 2), *(ins - 1)), m_y));
-#else
-        //  deep analysis: determine insertion point: pick the one where the cutline is shortest
+        db::Edge eprev = db::Edge (*iii, *ii);
+        db::Coord xprev = db::coord_traits<db::Coord>::rounded (edge_xaty (eprev, m_y));
 
-        for (PGPolyContour::iterator i = ins; i > cprev.begin () + 1; --i) {
+#if 1  //  experimental
+        if (m_prev_stitch_index == iprev) {
 
-          db::Edge ecut (i[-2], i[-1]);
-          db::Coord xcut = db::coord_traits<db::Coord>::rounded (edge_xaty (db::Edge (i[-2], i[-1]), m_y));
+          auto i = m_prev_stitch_ins;
+          ii = i;
+          iii = --ii;
+          --iii;
 
-          if (ins == i || (i[-1].y () >= m_y && i[-2].y () < m_y && xcut < c1.back ().x () && xcut > xprev)) {
+          if (ii->y () >= m_y) {
+
+            db::Edge ecut (*iii, *ii);
+            db::Coord xcut = db::coord_traits<db::Coord>::rounded (edge_xaty (ecut, m_y));
+
+            if (iii->y () < m_y && xcut < c1.back ().x () && xcut > xprev) {
               xprev = xcut;
               eprev = ecut;
               ins = i;
             }
 
           }
+
+        } else {
+
+          //  deep analysis: determine insertion point: pick the one where the cutline is shortest
+          //  CAUTION: this may introduce a O(2) complexity in the number of holes along the x axis
+
+          while (true) {
+
+            auto i = ii;
+
+            ii = iii;
+            if (ii == cprev.begin ()) {
+              break;
+            }
+
+            --iii;
+
+            if (ii->y () >= m_y) {
+
+              db::Edge ecut (*iii, *ii);
+              db::Coord xcut = db::coord_traits<db::Coord>::rounded (edge_xaty (ecut, m_y));
+
+              if (iii->y () < m_y && xcut < c1.back ().x () && xcut > xprev) {
+                xprev = xcut;
+                eprev = ecut;
+                ins = i;
+              }
+
+            }
+
+          }
+
+        }
 #endif
 
         //  compute intersection point with next edge
@@ -867,6 +910,11 @@ PolygonGenerator::join_contours (db::Coord x)
         }
 
         ins = cprev.insert (ins, pprev);
+
+        //  remember the insertion point - it may be a candidate to attach the next hole
+        m_prev_stitch_ins = ins;
+        m_prev_stitch_index = iprev;
+
         ++ins;
         if (eprev.p2 () != pprev) {
           cprev.insert (ins, eprev.p2 ());

src/db/db/dbPolygonGenerators.h

@@ -184,6 +184,8 @@ private:
   db::SimplePolygon m_spoly;
   static bool ms_compress;
   bool m_compress;
+  size_t m_prev_stitch_index;
+  std::list<db::Point>::iterator m_prev_stitch_ins;
 
   void join_contours (db::Coord x);
   void produce_poly (const PGPolyContour &c);

src/plugins/streamers/gds2/unit_tests/dbGDS2WriterTests.cc

@@ -1192,7 +1192,7 @@ TEST(121)
 {
   db::GDS2WriterOptions opt;
   opt.max_vertex_count = 4;
-  run_test (_this, "t121.oas.gz", "t121_au.gds.gz", true, opt);
+  run_test (_this, "t121.oas.gz", "t121_au_2.gds.gz", true, opt);
 }
 
 //  Meta info

src/plugins/streamers/pcb/unit_tests/dbGerberImport.cc

@@ -33,7 +33,7 @@
 
 #include <stdlib.h>
 
-static void run_test (tl::TestBase *_this, const char *dir)
+static void run_test (tl::TestBase *_this, const char *dir, const char *au_file = "au.oas.gz")
 {
   if (! tl::XMLParser::is_available ()) {
     throw tl::CancelException ();
@@ -53,7 +53,7 @@ static void run_test (tl::TestBase *_this, const char *dir)
     reader.read (layout, options);
   }
 
-  db::compare_layouts (_this, layout, tl::testdata_private () + "/pcb/" + dir + "/au.oas.gz", db::WriteOAS, 1);
+  db::compare_layouts (_this, layout, tl::testdata_private () + "/pcb/" + dir + "/" + au_file, db::WriteOAS, 1);
 }
 
 TEST(0_Metadata)
@@ -167,7 +167,7 @@ TEST(1)
 
 TEST(2)
 {
-  run_test (_this, "allegro");
+  run_test (_this, "allegro", "au_2.oas.gz");
 }
 
 TEST(3)
@@ -199,13 +199,13 @@ TEST(7)
 TEST(8)
 {
   test_is_long_runner ();
-  run_test (_this, "microchip-2");
+  run_test (_this, "microchip-2", "au_2.oas.gz");
 }
 
 TEST(9)
 {
   test_is_long_runner ();
-  run_test (_this, "microchip-3");
+  run_test (_this, "microchip-3", "au_2.oas.gz");
 }
 
 TEST(10)
@@ -236,7 +236,7 @@ TEST(14)
 
 TEST(15)
 {
-  run_test (_this, "gerbv_examples/polarity");
+  run_test (_this, "gerbv_examples/polarity", "au_2.oas.gz");
 }
 
 TEST(16)
@@ -294,7 +294,7 @@ TEST(25)
 TEST(26)
 {
   test_is_long_runner ();
-  run_test (_this, "pos-neg");
+  run_test (_this, "pos-neg", "au_2.oas.gz");
 }
 
 TEST(27)
@@ -334,12 +334,12 @@ TEST(X2_2e)
 
 TEST(X2_2f)
 {
-  run_test (_this, "x2-2f");
+  run_test (_this, "x2-2f", "au_2.oas.gz");
 }
 
 TEST(X2_2g)
 {
-  run_test (_this, "x2-2g");
+  run_test (_this, "x2-2g", "au_2.oas.gz");
 }
 
 TEST(X2_2h)
@@ -364,7 +364,7 @@ TEST(X2_2k)
 
 TEST(X2_3)
 {
-  run_test (_this, "x2-3");
+  run_test (_this, "x2-3", "au_2.oas.gz");
 }
 
 TEST(X2_4)

testdata/ruby/dbLibrary.rb

@@ -121,6 +121,12 @@ class DBLibrary_TestClass < TestBase
 
   def test_4_library_registration_and_rename
 
+    # clean up before
+    [ "RBA-unit-test", "RBA-unit-test2" ].each do |name|
+      l = RBA::Library::library_by_name(name)
+      l && l.unregister
+    end
+
     lib = RBA::Library::new
     lib.description = "LIB1"
     lib.delete
@@ -159,6 +165,12 @@ class DBLibrary_TestClass < TestBase
 
   def test_5_reload
 
+    # clean up before
+    [ "RBA-unit-test", "RBA-unit-test2" ].each do |name|
+      l = RBA::Library::library_by_name(name)
+      l && l.unregister
+    end
+
     lib = MyLibImpl::new
     lib.description = "LIB1"
     lib.register("RBA-unit-test")
@@ -178,6 +190,12 @@ class DBLibrary_TestClass < TestBase
 
   def test_6_cells_become_defunct_after_unregister
 
+    # clean up before
+    [ "RBA-unit-test", "RBA-unit-test2" ].each do |name|
+      l = RBA::Library::library_by_name(name)
+      l && l.unregister
+    end
+
     lib = RBA::Library::new
     lib.description = "LIB1"
     lib.register("RBA-unit-test")
@@ -209,6 +227,12 @@ class DBLibrary_TestClass < TestBase
 
   def test_7_change_ref
 
+    # clean up before
+    [ "RBA-unit-test", "RBA-unit-test2" ].each do |name|
+      l = RBA::Library::library_by_name(name)
+      l && l.unregister
+    end
+
     lib = RBA::Library::new
     lib.description = "LIB1"
     lib.register("RBA-unit-test")