Preparing 0.29.8

Changelog

@@ -1,3 +1,21 @@
+0.29.8           (2024-10-20):
+* Enhancement: %GITHUB%/issues/1869 Adding a new option, -to or --top-output to strmxor
+* Bug: %GITHUB%/issues/1870 Do not allow editing on invalid layers
+* Bug: %GITHUB%/issues/1874 Crash when copying a cell to another layout
+* Bug: %GITHUB%/issues/1877 Rounding introduces DRC error in LEF/DEF via
+* Bug: %GITHUB%/issues/1880 Enhancing GDS2 writer float conversion such that less rounding occurs
+* Bug: %GITHUB%/issues/1885 --subst-char option in strm2oas was not accepting "do not substitute"
+* Bug: %GITHUB%/issues/1886 Small documentation fix
+* Bug: %GITHUB%/issues/1887 Small documentation fix
+* Bug: %GITHUB%/issues/1899 Adding global operators for QPoint on Qt6 and more
+* Enhancement: %GITHUB%/issues/1900 Help/about dialog content selectable
+* Bug: %GITHUB%/issues/1902 Two potential memory issues fixed
+* Bugfix: LEF/DEF reader recognizes existing layers by name now
+  This happened to be an issue if you were reloading a LEF/DEF layout as 
+  name layers got added as duplicates.
+* Bugfix: In DRC, with '@+' as target layout, maintain the original active cell view
+  This way, DRC can be re-run on the original layout, but each time generating a new output cellview.
+
 0.29.7           (2024-09-22):
 * Bug: %GITHUB%/issues/1864 Copy & paste allows creating a recursive hierarchy
 * Bug: %GITHUB%/issues/1860 A bug about layer undo

Changelog.Debian

@@ -1,3 +1,10 @@
+klayout (0.29.8-1) unstable; urgency=low
+
+  * New features and bugfixes
+    - See changelog
+
+ -- Matthias Köfferlein <matthias@koefferlein.de>  Sun, 20 Oct 2024 19:42:32 +0200
+
 klayout (0.29.7-1) unstable; urgency=low
 
   * New features and bugfixes

src/pymod/distutils_src/klayout/dbcore.pyi

@@ -52659,6 +52659,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative Negative output from the first input
@@ -52699,6 +52700,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative Negative output from the first input
@@ -53013,6 +53015,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative Negative output from the first input
@@ -53131,6 +53134,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative If true, edges not violation the condition will be output as pseudo-edge pairs
@@ -53615,7 +53619,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
-        @param shielded Enables shielding
+        @param shielded Enables shielding (see below)
         @param negative If true, edges not violation the condition will be output as pseudo-edge pairs
         @param property_constraint Specifies whether to consider only shapes with a certain property relation
         @param property_constraint Only \IgnoreProperties and \NoPropertyConstraint are allowed - in the last case, properties are copied from the original shapes to the output@param zero_distance_mode Specifies how to handle edges with zero distance
@@ -53682,6 +53686,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative Negative output from the first input
@@ -54118,6 +54123,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative Negative output from the first input
@@ -54450,6 +54456,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
+        @param shielded Enables shielding (see below)
         @param opposite_filter Specifies a filter mode for errors happening on opposite sides of inputs shapes
         @param rect_filter Specifies an error filter for rectangular input shapes
         @param negative If true, edges not violation the condition will be output as pseudo-edge pairs
@@ -54773,7 +54780,7 @@ class Region(ShapeCollection):
         @param ignore_angle The angle above which no check is performed
         @param min_projection The lower threshold of the projected length of one edge onto another
         @param max_projection The upper limit of the projected length of one edge onto another
-        @param shielded Enables shielding
+        @param shielded Enables shielding (see below)
         @param negative If true, edges not violation the condition will be output as pseudo-edge pairs
         @param property_constraint Only \IgnoreProperties and \NoPropertyConstraint are allowed - in the last case, properties are copied from the original shapes to the output. @param zero_distance_mode Specifies how to handle edges with zero distance
         Other than 'width' allow more options here.

src/pymod/distutils_src/klayout/laycore.pyi

@@ -6748,7 +6748,7 @@ class LayoutViewBase:
         r"""
         @brief Gets the active cellview (shown in hierarchy browser)
 
-        This is a convenience method which is equivalent to cellview(active_cellview_index()).
+        This is a convenience method which is equivalent to "cellview(active_cellview_index)".
 
         This method has been introduced in version 0.19.
         Starting from version 0.25, the returned object can be manipulated which will have an immediate effect on the display.

version.sh

@@ -2,10 +2,10 @@
 # This script is sourced to define the main version parameters
 
 # The main version
-KLAYOUT_VERSION="0.29.7"
+KLAYOUT_VERSION="0.29.8"
 
 # The version used for PyPI (don't use variables here!)
-KLAYOUT_PYPI_VERSION="0.29.7"
+KLAYOUT_PYPI_VERSION="0.29.8"
 
 # The build date
 KLAYOUT_VERSION_DATE=$(date "+%Y-%m-%d")