Remove the init parameter of functors, and instead use

the special C<?> symbols to initialize inputs. This is
 clearer and more regular.

tgt-vvp/vvp_scope.c

@@ -17,7 +17,7 @@
  *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  */
 #if !defined(WINNT)
-#ident "$Id: vvp_scope.c,v 1.22 2001/04/30 00:00:27 steve Exp $"
+#ident "$Id: vvp_scope.c,v 1.23 2001/05/02 04:05:16 steve Exp $"
 #endif
 
 # include  "vvp_priv.h"
@@ -241,7 +241,7 @@ static void draw_logic_in_scope(ivl_net_logic_t lptr)
 {
 	    unsigned pdx;
       const char*ltype = "?";
-      unsigned init_val = 0;
+      char identity_val = '0';
 
 
       switch (ivl_logic_type(lptr)) {
@@ -264,7 +264,7 @@ static void draw_logic_in_scope(ivl_net_logic_t lptr)
 
 	  case IVL_LO_AND:
 	    ltype = "AND";
-	    init_val = 0x55;
+	    identity_val = '1';
 	    break;
 
 	  case IVL_LO_BUF:
@@ -281,6 +281,7 @@ static void draw_logic_in_scope(ivl_net_logic_t lptr)
 
 	  case IVL_LO_NAND:
 	    ltype = "NAND";
+	    identity_val = '1';
 	    break;
 
 	  case IVL_LO_NOR:
@@ -312,13 +313,7 @@ static void draw_logic_in_scope(ivl_net_logic_t lptr)
 
       assert(ivl_logic_pins(lptr) <= 5);
 
-      for (pdx = 1 ; pdx < ivl_logic_pins(lptr) ;  pdx += 1) {
+      fprintf(vvp_out, "L_%s .functor %s", ivl_logic_name(lptr), ltype);
-	    unsigned mask = 3 << (pdx - 1);
-	    init_val = (init_val & ~mask) | (2 << (pdx - 1));
-      }
-
-      fprintf(vvp_out, "L_%s .functor %s, 0x%x",
-	      ivl_logic_name(lptr), ltype, init_val);
 
       for (pdx = 1 ;  pdx < ivl_logic_pins(lptr) ;  pdx += 1) {
 	    ivl_nexus_t nex = ivl_logic_pin(lptr, pdx);
@@ -326,6 +321,10 @@ static void draw_logic_in_scope(ivl_net_logic_t lptr)
 	    draw_nexus_input(nex);
       }
 
+      for ( ;  pdx < 5 ;  pdx += 1) {
+	    fprintf(vvp_out, ", C<%c>", identity_val);
+      }
+
       fprintf(vvp_out, ";\n");
 }
 
@@ -424,15 +423,14 @@ static void draw_lpm_mux(ivl_lpm_t net)
       for (idx = 0 ;  idx < width ;  idx += 1) {
 	    ivl_nexus_t a = ivl_lpm_data2(net, 0, idx);
 	    ivl_nexus_t b = ivl_lpm_data2(net, 1, idx);
-	    fprintf(vvp_out, "L_%s/%u .functor MUXZ, 0x6a",
+	    fprintf(vvp_out, "L_%s/%u .functor MUXZ, ",
 		    ivl_lpm_name(net), idx);
-	    fprintf(vvp_out, ", ");
 	    draw_nexus_input(a);
 	    fprintf(vvp_out, ", ");
 	    draw_nexus_input(b);
 	    fprintf(vvp_out, ", ");
 	    draw_nexus_input(s);
-	    fprintf(vvp_out, ";\n");
+	    fprintf(vvp_out, ", C<1>;\n");
       }
 
 }
@@ -511,6 +509,11 @@ int draw_scope(ivl_scope_t net, ivl_scope_t parent)
 
 /*
  * $Log: vvp_scope.c,v $
+ * Revision 1.23  2001/05/02 04:05:16  steve
+ *  Remove the init parameter of functors, and instead use
+ *  the special C<?> symbols to initialize inputs. This is
+ *  clearer and more regular.
+ *
  * Revision 1.22  2001/04/30 00:00:27  steve
  *  detect multiple drivers on nexa.
  *

vvp/README.txt

@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2001 Stephen Williams ([email protected])
  *
- *  $Id: README.txt,v 1.21 2001/05/01 01:09:39 steve Exp $
+ *  $Id: README.txt,v 1.22 2001/05/02 04:05:17 steve Exp $
  */
 
 VVP SIMULATION ENGINE
@@ -87,23 +87,19 @@ label is required for functors.
 
 The general syntax of a functor is:
 
-	<label> .functor <type>, <init> [, symbol_list]
+	<label> .functor <type>, symbol_list ;
 
-The symbol list is 0-4 names of labels of other functors. These
+The symbol list is 4 names of labels of other functors. These connect
-connect inputs of the functor of the statement to the output of other
+inputs of the functor of the statement to the output of other
-functors. The type is the label of a .ftype statement elsewhere in the
+functors. If the input is unconnected, use a C<?> symbol instead. The
-program. The references .ftype describes the behavoir of the
+type selects the truth lookup table to use for the functor
-functor.
+implementation. Most of the core gate types have built in tables.
 
-The <init> value is the 8-bit initial value of the 4 input ports. The
+The initial values of all the inputs and the output is x. Any other
-LSB is port 0, and the MSB port 3. If there are any constant inputs,
+value is passed around as run-time behavior. If the inputs have C<?>
-then the constantat the input becomes the initial value of the
+symbols, then the inputs are initialized to the specified bit value,
-corresponding input, replacing the value given in the <init>
+and if this causes the output to be something other then x, a
-position. Also, the output of the functor is calculated at compile
+propagation event is created to be executed at the start of run time.
-time given the init and constant input values. If the output is
-different from "x", then a propagation event is schedule for the
-functor so that when the simulation starts, the non-x value gets
-propagated.
 
 Almost all of the structural aspects of a simulation can be
 represented by functors, which perform the very basic task of

vvp/compile.cc

@@ -17,7 +17,7 @@
  *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  */
 #if !defined(WINNT)
-#ident "$Id: compile.cc,v 1.51 2001/05/02 01:57:25 steve Exp $"
+#ident "$Id: compile.cc,v 1.52 2001/05/02 04:05:17 steve Exp $"
 #endif
 
 # include  "compile.h"
@@ -287,8 +287,7 @@ static void inputs_connect(vvp_ipoint_t fdx, unsigned argc, struct symb_s*argv)
  * functor, and map the name to the vvp_ipoint_t address for the
  * functor. Also resolve the inputs to the functor.
  */
-void compile_functor(char*label, char*type, unsigned init,
+void compile_functor(char*label, char*type, unsigned argc, struct symb_s*argv)
-		     unsigned argc, struct symb_s*argv)
 {
       vvp_ipoint_t fdx = functor_allocate(1);
       functor_t obj = functor_index(fdx);
@@ -297,7 +296,7 @@ void compile_functor(char*label, char*type, unsigned init,
 
       assert(argc <= 4);
 
-      obj->ival = init;
+      obj->ival = 0x33;
       obj->oval = 2;
       obj->mode = 0;
 
@@ -1065,6 +1064,11 @@ void compile_dump(FILE*fd)
 
 /*
  * $Log: compile.cc,v $
+ * Revision 1.52  2001/05/02 04:05:17  steve
+ *  Remove the init parameter of functors, and instead use
+ *  the special C<?> symbols to initialize inputs. This is
+ *  clearer and more regular.
+ *
  * Revision 1.51  2001/05/02 01:57:25  steve
  *  Support behavioral subtraction.
  *

vvp/compile.h

@@ -19,7 +19,7 @@
  *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  */
 #if !defined(WINNT)
-#ident "$Id: compile.h,v 1.19 2001/05/01 01:09:39 steve Exp $"
+#ident "$Id: compile.h,v 1.20 2001/05/02 04:05:17 steve Exp $"
 #endif
 
 # include  <stdio.h>
@@ -58,7 +58,7 @@ extern void compile_load_vpi_module(char*name);
  * of the functor. The compile should match those port parameters up
  * to existing functors to manage the linking.
  */
-extern void compile_functor(char*label, char*type, unsigned init,
+extern void compile_functor(char*label, char*type,
 			    unsigned argc, struct symb_s*argv);
 
 
@@ -174,6 +174,11 @@ extern void compile_dump(FILE*fd);
 
 /*
  * $Log: compile.h,v $
+ * Revision 1.20  2001/05/02 04:05:17  steve
+ *  Remove the init parameter of functors, and instead use
+ *  the special C<?> symbols to initialize inputs. This is
+ *  clearer and more regular.
+ *
  * Revision 1.19  2001/05/01 01:09:39  steve
  *  Add support for memory objects. (Stephan Boettcher)
  *

vvp/parse.y

@@ -19,7 +19,7 @@
  *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  */
 #if !defined(WINNT)
-#ident "$Id: parse.y,v 1.23 2001/05/01 01:09:39 steve Exp $"
+#ident "$Id: parse.y,v 1.24 2001/05/02 04:05:17 steve Exp $"
 #endif
 
 # include  "parse_misc.h"
@@ -107,12 +107,13 @@ statement
   /* Functor statements define functors. The functor must have a
      label and a type name, and may have operands. */
 
-	: T_LABEL K_FUNCTOR T_SYMBOL ',' T_NUMBER ',' symbols ';'
+	: T_LABEL K_FUNCTOR T_SYMBOL ',' symbols ';'
-		{ struct symbv_s obj = $7;
+		{ struct symbv_s obj = $5;
-		  compile_functor($1, $3, $5, obj.cnt, obj.vect);
+		  compile_functor($1, $3, obj.cnt, obj.vect);
 		}
+
 	| T_LABEL K_FUNCTOR T_SYMBOL','  T_NUMBER ';'
-		{ compile_functor($1, $3, $5, 0, 0); }
+		{ compile_functor($1, $3, 0, 0); }
 
 
   /* UDP statements define or instantiate UDPs.  Definitions take a 
@@ -425,6 +426,11 @@ int compile_design(const char*path)
 
 /*
  * $Log: parse.y,v $
+ * Revision 1.24  2001/05/02 04:05:17  steve
+ *  Remove the init parameter of functors, and instead use
+ *  the special C<?> symbols to initialize inputs. This is
+ *  clearer and more regular.
+ *
  * Revision 1.23  2001/05/01 01:09:39  steve
  *  Add support for memory objects. (Stephan Boettcher)
  *