mirror of https://github.com/YosysHQ/icestorm.git
Merge branch 'iceprog-pipe' of https://github.com/jhol/icestorm
This commit is contained in:
Clifford Wolf
commit
c373976bc1
|
|
@ -44,14 +44,14 @@ void check_rx()
|
|||
uint8_t data;
|
||||
int rc = ftdi_read_data(&ftdic, &data, 1);
|
||||
if (rc <= 0) break;
|
||||
printf("unexpected rx byte: %02X\n", data);
|
||||
fprintf(stderr, "unexpected rx byte: %02X\n", data);
|
||||
}
|
||||
}
|
||||
|
||||
void error()
|
||||
{
|
||||
check_rx();
|
||||
printf("ABORT.\n");
|
||||
fprintf(stderr, "ABORT.\n");
|
||||
if (ftdic_open)
|
||||
ftdi_usb_close(&ftdic);
|
||||
ftdi_deinit(&ftdic);
|
||||
|
|
@ -64,7 +64,7 @@ uint8_t recv_byte()
|
|||
while (1) {
|
||||
int rc = ftdi_read_data(&ftdic, &data, 1);
|
||||
if (rc < 0) {
|
||||
printf("Read error.\n");
|
||||
fprintf(stderr, "Read error.\n");
|
||||
error();
|
||||
}
|
||||
if (rc == 1)
|
||||
|
|
@ -78,7 +78,7 @@ void send_byte(uint8_t data)
|
|||
{
|
||||
int rc = ftdi_write_data(&ftdic, &data, 1);
|
||||
if (rc != 1) {
|
||||
printf("Write error (single byte, rc=%d, expected %d).\n", rc, 1);
|
||||
fprintf(stderr, "Write error (single byte, rc=%d, expected %d).\n", rc, 1);
|
||||
error();
|
||||
}
|
||||
}
|
||||
|
|
@ -94,7 +94,7 @@ void send_spi(uint8_t *data, int n)
|
|||
|
||||
int rc = ftdi_write_data(&ftdic, data, n);
|
||||
if (rc != n) {
|
||||
printf("Write error (chunk, rc=%d, expected %d).\n", rc, n);
|
||||
fprintf(stderr, "Write error (chunk, rc=%d, expected %d).\n", rc, n);
|
||||
error();
|
||||
}
|
||||
}
|
||||
|
|
@ -110,7 +110,7 @@ void xfer_spi(uint8_t *data, int n)
|
|||
|
||||
int rc = ftdi_write_data(&ftdic, data, n);
|
||||
if (rc != n) {
|
||||
printf("Write error (chunk, rc=%d, expected %d).\n", rc, n);
|
||||
fprintf(stderr, "Write error (chunk, rc=%d, expected %d).\n", rc, n);
|
||||
error();
|
||||
}
|
||||
|
||||
|
|
@ -148,17 +148,17 @@ int get_cdone()
|
|||
|
||||
void flash_read_id()
|
||||
{
|
||||
// printf("read flash ID..\n");
|
||||
// fprintf(stderr, "read flash ID..\n");
|
||||
|
||||
uint8_t data[21] = { 0x9F };
|
||||
set_gpio(0, 0);
|
||||
xfer_spi(data, 21);
|
||||
set_gpio(1, 0);
|
||||
|
||||
printf("flash ID:");
|
||||
fprintf(stderr, "flash ID:");
|
||||
for (int i = 1; i < 21; i++)
|
||||
printf(" 0x%02X", data[i]);
|
||||
printf("\n");
|
||||
fprintf(stderr, " 0x%02X", data[i]);
|
||||
fprintf(stderr, "\n");
|
||||
}
|
||||
|
||||
void flash_power_up()
|
||||
|
|
@ -180,7 +180,7 @@ void flash_power_down()
|
|||
void flash_write_enable()
|
||||
{
|
||||
if (verbose)
|
||||
printf("write enable..\n");
|
||||
fprintf(stderr, "write enable..\n");
|
||||
|
||||
uint8_t data[1] = { 0x06 };
|
||||
set_gpio(0, 0);
|
||||
|
|
@ -190,7 +190,7 @@ void flash_write_enable()
|
|||
|
||||
void flash_bulk_erase()
|
||||
{
|
||||
printf("bulk erase..\n");
|
||||
fprintf(stderr, "bulk erase..\n");
|
||||
|
||||
uint8_t data[1] = { 0xc7 };
|
||||
set_gpio(0, 0);
|
||||
|
|
@ -200,7 +200,7 @@ void flash_bulk_erase()
|
|||
|
||||
void flash_64kB_sector_erase(int addr)
|
||||
{
|
||||
printf("erase 64kB sector at 0x%06X..\n", addr);
|
||||
fprintf(stderr, "erase 64kB sector at 0x%06X..\n", addr);
|
||||
|
||||
uint8_t command[4] = { 0xd8, addr >> 16, addr >> 8, addr };
|
||||
set_gpio(0, 0);
|
||||
|
|
@ -211,7 +211,7 @@ void flash_64kB_sector_erase(int addr)
|
|||
void flash_prog(int addr, uint8_t *data, int n)
|
||||
{
|
||||
if (verbose)
|
||||
printf("prog 0x%06X +0x%03X..\n", addr, n);
|
||||
fprintf(stderr, "prog 0x%06X +0x%03X..\n", addr, n);
|
||||
|
||||
uint8_t command[4] = { 0x02, addr >> 16, addr >> 8, addr };
|
||||
set_gpio(0, 0);
|
||||
|
|
@ -221,13 +221,13 @@ void flash_prog(int addr, uint8_t *data, int n)
|
|||
|
||||
if (verbose)
|
||||
for (int i = 0; i < n; i++)
|
||||
printf("%02x%c", data[i], i == n-1 || i % 32 == 31 ? '\n' : ' ');
|
||||
fprintf(stderr, "%02x%c", data[i], i == n-1 || i % 32 == 31 ? '\n' : ' ');
|
||||
}
|
||||
|
||||
void flash_read(int addr, uint8_t *data, int n)
|
||||
{
|
||||
if (verbose)
|
||||
printf("read 0x%06X +0x%03X..\n", addr, n);
|
||||
fprintf(stderr, "read 0x%06X +0x%03X..\n", addr, n);
|
||||
|
||||
uint8_t command[4] = { 0x03, addr >> 16, addr >> 8, addr };
|
||||
set_gpio(0, 0);
|
||||
|
|
@ -238,13 +238,13 @@ void flash_read(int addr, uint8_t *data, int n)
|
|||
|
||||
if (verbose)
|
||||
for (int i = 0; i < n; i++)
|
||||
printf("%02x%c", data[i], i == n-1 || i % 32 == 31 ? '\n' : ' ');
|
||||
fprintf(stderr, "%02x%c", data[i], i == n-1 || i % 32 == 31 ? '\n' : ' ');
|
||||
}
|
||||
|
||||
void flash_wait()
|
||||
{
|
||||
if (verbose)
|
||||
printf("waiting..");
|
||||
fprintf(stderr, "waiting..");
|
||||
|
||||
while (1)
|
||||
{
|
||||
|
|
@ -258,72 +258,76 @@ void flash_wait()
|
|||
break;
|
||||
|
||||
if (verbose) {
|
||||
printf(".");
|
||||
fprintf(stderr, ".");
|
||||
fflush(stdout);
|
||||
}
|
||||
usleep(250000);
|
||||
}
|
||||
|
||||
if (verbose)
|
||||
printf("\n");
|
||||
fprintf(stderr, "\n");
|
||||
}
|
||||
|
||||
void help(const char *progname)
|
||||
{
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "iceprog -- simple programming tool for FTDI-based Lattice iCE programmers\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "Notes for iCEstick (iCE40HX-1k devel board):\n");
|
||||
fprintf(stderr, " An unmodified iCEstick can only be programmed via the serial flash.\n");
|
||||
fprintf(stderr, " Direct programming of the SRAM is not supported. For direct SRAM\n");
|
||||
fprintf(stderr, " programming the flash chip and one zero ohm resistor must be desoldered\n");
|
||||
fprintf(stderr, " and the FT2232H SI pin must be connected to the iCE SPI_SI pin, as shown\n");
|
||||
fprintf(stderr, " in this picture: http://www.clifford.at/gallery/2014-elektronik/IMG_20141115_183838\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "Notes for the iCE40-HX8K Breakout Board:\n");
|
||||
fprintf(stderr, " Make sure that the jumper settings on the board match the selected\n");
|
||||
fprintf(stderr, " mode (SRAM or FLASH). See the iCE40-HX8K user manual for details.\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "Usage: %s [options] <filename>\n", progname);
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -d <device-string>\n");
|
||||
fprintf(stderr, " use the specified USB device:\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " d:<devicenode> (e.g. d:002/005)\n");
|
||||
fprintf(stderr, " i:<vendor>:<product> (e.g. i:0x0403:0x6010)\n");
|
||||
fprintf(stderr, " i:<vendor>:<product>:<index> (e.g. i:0x0403:0x6010:0)\n");
|
||||
fprintf(stderr, " s:<vendor>:<product>:<serial-string>\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -I [ABCD]\n");
|
||||
fprintf(stderr, " connect to the specified interface on the FTDI chip\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -r\n");
|
||||
fprintf(stderr, " read entire flash (32Mb / 4MB) and write to file\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -R\n");
|
||||
fprintf(stderr, " read first 256 kB from flash and write to file\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -c\n");
|
||||
fprintf(stderr, " do not write flash, only verify (check)\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -b\n");
|
||||
fprintf(stderr, " bulk erase entire flash before writing\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -n\n");
|
||||
fprintf(stderr, " do not erase flash before writing\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -S\n");
|
||||
fprintf(stderr, " perform SRAM programming\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -t\n");
|
||||
fprintf(stderr, " just read the flash ID sequence\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, " -v\n");
|
||||
fprintf(stderr, " verbose output\n");
|
||||
fprintf(stderr, "\n");
|
||||
fprintf(stderr, "\n"
|
||||
"iceprog -- simple programming tool for FTDI-based Lattice iCE programmers\n"
|
||||
"\n"
|
||||
"\n"
|
||||
"Notes for iCEstick (iCE40HX-1k devel board):\n"
|
||||
" An unmodified iCEstick can only be programmed via the serial flash.\n"
|
||||
" Direct programming of the SRAM is not supported. For direct SRAM\n"
|
||||
" programming the flash chip and one zero ohm resistor must be desoldered\n"
|
||||
" and the FT2232H SI pin must be connected to the iCE SPI_SI pin, as shown\n"
|
||||
" in this picture: http://www.clifford.at/gallery/2014-elektronik/IMG_20141115_183838\n"
|
||||
"\n"
|
||||
"\n"
|
||||
"Notes for the iCE40-HX8K Breakout Board:\n"
|
||||
" Make sure that the jumper settings on the board match the selected\n"
|
||||
" mode (SRAM or FLASH). See the iCE40-HX8K user manual for details.\n"
|
||||
"\n"
|
||||
"\n"
|
||||
"Usage: %s [options] <filename>\n"
|
||||
"\n"
|
||||
" <filename>\n"
|
||||
" the path to the file to read or write from, or - to read\n"
|
||||
" from stdin and write to stdout\n"
|
||||
"\n"
|
||||
" -d <device-string>\n"
|
||||
" use the specified USB device:\n"
|
||||
"\n"
|
||||
" d:<devicenode> (e.g. d:002/005)\n"
|
||||
" i:<vendor>:<product> (e.g. i:0x0403:0x6010)\n"
|
||||
" i:<vendor>:<product>:<index> (e.g. i:0x0403:0x6010:0)\n"
|
||||
" s:<vendor>:<product>:<serial-string>\n"
|
||||
"\n"
|
||||
" -I [ABCD]\n"
|
||||
" connect to the specified interface on the FTDI chip\n"
|
||||
"\n"
|
||||
" -r\n"
|
||||
" read entire flash (32Mb / 4MB) and write to file\n"
|
||||
"\n"
|
||||
" -R\n"
|
||||
" read first 256 kB from flash and write to file\n"
|
||||
"\n"
|
||||
" -c\n"
|
||||
" do not write flash, only verify (check)\n"
|
||||
"\n"
|
||||
" -b\n"
|
||||
" bulk erase entire flash before writing\n"
|
||||
"\n"
|
||||
" -n\n"
|
||||
" do not erase flash before writing\n"
|
||||
"\n"
|
||||
" -S\n"
|
||||
" perform SRAM programming\n"
|
||||
"\n"
|
||||
" -t\n"
|
||||
" just read the flash ID sequence\n"
|
||||
"\n"
|
||||
" -v\n"
|
||||
" verbose output\n"
|
||||
"\n", progname);
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -400,19 +404,19 @@ int main(int argc, char **argv)
|
|||
// Initialize USB connection to FT2232H
|
||||
// ---------------------------------------------------------
|
||||
|
||||
printf("init..\n");
|
||||
fprintf(stderr, "init..\n");
|
||||
|
||||
ftdi_init(&ftdic);
|
||||
ftdi_set_interface(&ftdic, ifnum);
|
||||
|
||||
if (devstr != NULL) {
|
||||
if (ftdi_usb_open_string(&ftdic, devstr)) {
|
||||
printf("Can't find iCE FTDI USB device (device string %s).\n", devstr);
|
||||
fprintf(stderr, "Can't find iCE FTDI USB device (device string %s).\n", devstr);
|
||||
error();
|
||||
}
|
||||
} else {
|
||||
if (ftdi_usb_open(&ftdic, 0x0403, 0x6010)) {
|
||||
printf("Can't find iCE FTDI USB device (vedor_id 0x0403, device_id 0x6010).\n");
|
||||
fprintf(stderr, "Can't find iCE FTDI USB device (vedor_id 0x0403, device_id 0x6010).\n");
|
||||
error();
|
||||
}
|
||||
}
|
||||
|
|
@ -420,17 +424,17 @@ int main(int argc, char **argv)
|
|||
ftdic_open = true;
|
||||
|
||||
if (ftdi_usb_reset(&ftdic)) {
|
||||
printf("Failed to reset iCE FTDI USB device.\n");
|
||||
fprintf(stderr, "Failed to reset iCE FTDI USB device.\n");
|
||||
error();
|
||||
}
|
||||
|
||||
if (ftdi_usb_purge_buffers(&ftdic)) {
|
||||
printf("Failed to purge buffers on iCE FTDI USB device.\n");
|
||||
fprintf(stderr, "Failed to purge buffers on iCE FTDI USB device.\n");
|
||||
error();
|
||||
}
|
||||
|
||||
if (ftdi_set_bitmode(&ftdic, 0xff, BITMODE_MPSSE) < 0) {
|
||||
printf("Failed set BITMODE_MPSSE on iCE FTDI USB device.\n");
|
||||
fprintf(stderr, "Failed set BITMODE_MPSSE on iCE FTDI USB device.\n");
|
||||
error();
|
||||
}
|
||||
|
||||
|
|
@ -442,7 +446,7 @@ int main(int argc, char **argv)
|
|||
send_byte(0x00);
|
||||
send_byte(0x00);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
|
||||
set_gpio(1, 1);
|
||||
usleep(100000);
|
||||
|
|
@ -450,12 +454,12 @@ int main(int argc, char **argv)
|
|||
|
||||
if (test_mode)
|
||||
{
|
||||
printf("reset..\n");
|
||||
fprintf(stderr, "reset..\n");
|
||||
|
||||
set_gpio(1, 0);
|
||||
usleep(250000);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
|
||||
flash_power_up();
|
||||
|
||||
|
|
@ -466,7 +470,7 @@ int main(int argc, char **argv)
|
|||
set_gpio(1, 1);
|
||||
usleep(250000);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
}
|
||||
else if (prog_sram)
|
||||
{
|
||||
|
|
@ -474,7 +478,7 @@ int main(int argc, char **argv)
|
|||
// Reset
|
||||
// ---------------------------------------------------------
|
||||
|
||||
printf("reset..\n");
|
||||
fprintf(stderr, "reset..\n");
|
||||
|
||||
set_gpio(0, 0);
|
||||
usleep(100);
|
||||
|
|
@ -482,31 +486,33 @@ int main(int argc, char **argv)
|
|||
set_gpio(0, 1);
|
||||
usleep(2000);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
|
||||
|
||||
// ---------------------------------------------------------
|
||||
// Program
|
||||
// ---------------------------------------------------------
|
||||
|
||||
FILE *f = fopen(filename, "r");
|
||||
FILE *f = (strcmp(filename, "-") == 0) ? stdin :
|
||||
fopen(filename, "r");
|
||||
if (f == NULL) {
|
||||
fprintf(stderr, "Error: Can't open '%s' for reading: %s\n", filename, strerror(errno));
|
||||
error();
|
||||
}
|
||||
|
||||
printf("programming..\n");
|
||||
fprintf(stderr, "programming..\n");
|
||||
while (1)
|
||||
{
|
||||
static unsigned char buffer[4096];
|
||||
int rc = fread(buffer, 1, 4096, f);
|
||||
if (rc <= 0) break;
|
||||
if (verbose)
|
||||
printf("sending %d bytes.\n", rc);
|
||||
fprintf(stderr, "sending %d bytes.\n", rc);
|
||||
send_spi(buffer, rc);
|
||||
}
|
||||
|
||||
fclose(f);
|
||||
if (f != stdin)
|
||||
fclose(f);
|
||||
|
||||
// add 48 dummy bits
|
||||
send_byte(0x8f);
|
||||
|
|
@ -517,7 +523,7 @@ int main(int argc, char **argv)
|
|||
send_byte(0x8e);
|
||||
send_byte(0x00);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
}
|
||||
else
|
||||
{
|
||||
|
|
@ -525,12 +531,12 @@ int main(int argc, char **argv)
|
|||
// Reset
|
||||
// ---------------------------------------------------------
|
||||
|
||||
printf("reset..\n");
|
||||
fprintf(stderr, "reset..\n");
|
||||
|
||||
set_gpio(1, 0);
|
||||
usleep(250000);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
|
||||
flash_power_up();
|
||||
|
||||
|
|
@ -543,7 +549,8 @@ int main(int argc, char **argv)
|
|||
|
||||
if (!read_mode && !check_mode)
|
||||
{
|
||||
FILE *f = fopen(filename, "r");
|
||||
FILE *f = (strcmp(filename, "-") == 0) ? stdin :
|
||||
fopen(filename, "r");
|
||||
if (f == NULL) {
|
||||
fprintf(stderr, "Error: Can't open '%s' for reading: %s\n", filename, strerror(errno));
|
||||
error();
|
||||
|
|
@ -565,7 +572,7 @@ int main(int argc, char **argv)
|
|||
error();
|
||||
}
|
||||
|
||||
printf("file size: %d\n", (int)st_buf.st_size);
|
||||
fprintf(stderr, "file size: %d\n", (int)st_buf.st_size);
|
||||
for (int addr = 0; addr < st_buf.st_size; addr += 0x10000) {
|
||||
flash_write_enable();
|
||||
flash_64kB_sector_erase(addr);
|
||||
|
|
@ -574,7 +581,7 @@ int main(int argc, char **argv)
|
|||
}
|
||||
}
|
||||
|
||||
printf("programming..\n");
|
||||
fprintf(stderr, "programming..\n");
|
||||
for (int addr = 0; true; addr += 256) {
|
||||
uint8_t buffer[256];
|
||||
int rc = fread(buffer, 1, 256, f);
|
||||
|
|
@ -584,7 +591,8 @@ int main(int argc, char **argv)
|
|||
flash_wait();
|
||||
}
|
||||
|
||||
fclose(f);
|
||||
if (f != stdin)
|
||||
fclose(f);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -594,30 +602,33 @@ int main(int argc, char **argv)
|
|||
|
||||
if (read_mode)
|
||||
{
|
||||
FILE *f = fopen(filename, "w");
|
||||
FILE *f = (strcmp(filename, "-") == 0) ? stdout :
|
||||
fopen(filename, "w");
|
||||
if (f == NULL) {
|
||||
fprintf(stderr, "Error: Can't open '%s' for writing: %s\n", filename, strerror(errno));
|
||||
error();
|
||||
}
|
||||
|
||||
printf("reading..\n");
|
||||
fprintf(stderr, "reading..\n");
|
||||
for (int addr = 0; addr < max_read_size; addr += 256) {
|
||||
uint8_t buffer[256];
|
||||
flash_read(addr, buffer, 256);
|
||||
fwrite(buffer, 256, 1, f);
|
||||
}
|
||||
|
||||
fclose(f);
|
||||
if (f != stdout)
|
||||
fclose(f);
|
||||
}
|
||||
else
|
||||
{
|
||||
FILE *f = fopen(filename, "r");
|
||||
FILE *f = (strcmp(filename, "-") == 0) ? stdin :
|
||||
fopen(filename, "r");
|
||||
if (f == NULL) {
|
||||
fprintf(stderr, "Error: Can't open '%s' for reading: %s\n", filename, strerror(errno));
|
||||
error();
|
||||
}
|
||||
|
||||
printf("reading..\n");
|
||||
fprintf(stderr, "reading..\n");
|
||||
for (int addr = 0; true; addr += 256) {
|
||||
uint8_t buffer_flash[256], buffer_file[256];
|
||||
int rc = fread(buffer_file, 1, 256, f);
|
||||
|
|
@ -629,9 +640,10 @@ int main(int argc, char **argv)
|
|||
}
|
||||
}
|
||||
|
||||
printf("VERIFY OK\n");
|
||||
fprintf(stderr, "VERIFY OK\n");
|
||||
|
||||
fclose(f);
|
||||
if (f != stdin)
|
||||
fclose(f);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -644,7 +656,7 @@ int main(int argc, char **argv)
|
|||
set_gpio(1, 1);
|
||||
usleep(250000);
|
||||
|
||||
printf("cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
fprintf(stderr, "cdone: %s\n", get_cdone() ? "high" : "low");
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -652,7 +664,7 @@ int main(int argc, char **argv)
|
|||
// Exit
|
||||
// ---------------------------------------------------------
|
||||
|
||||
printf("Bye.\n");
|
||||
fprintf(stderr, "Bye.\n");
|
||||
ftdi_disable_bitbang(&ftdic);
|
||||
ftdi_usb_close(&ftdic);
|
||||
ftdi_deinit(&ftdic);
|
||||
|
|
|
|||
Loading…
Reference in New Issue