295 lines
8.9 KiB
Plaintext
295 lines
8.9 KiB
Plaintext
OpenSTA Timing Analyzer Release Notes
|
|
-------------------------------------
|
|
|
|
This file summarizes user visible changes for each release.
|
|
|
|
Release 2.7.0 2025/05/19
|
|
-------------------------
|
|
|
|
The OpenSTA library `libOpenSTA` and `sta` executable are now built in the
|
|
build directory instead of `app/`.
|
|
|
|
The set_max_delay and set_min_delay commands now support the -probe option.
|
|
With -probe these commands do not break paths at internal (non-startpoint) pins.
|
|
|
|
The set_property command is used to annotate a user defined property
|
|
on an object. It does not change the value of built in properties. If
|
|
property names a built-in property it has no effect.
|
|
|
|
set_property [-object_type type] object property value
|
|
|
|
Release 2.6.1 2025/03/30
|
|
-------------------------
|
|
|
|
The -list_annotated and -list_not_annotated arguments to the
|
|
report_annotated_delay and report_annotated_check commands have been renamed to
|
|
-report_annotated and -report_unannotated.
|
|
|
|
The Tcl "source" command is no longer redefined to support "-echo" and
|
|
"-verbose" arguments and redirecton. Use the "include" command instead.
|
|
|
|
include [-echo] [-verbose] filename [> filename] [>> filename]
|
|
-echo echos commands as they are read
|
|
-verbose prints command results as they are evaluated
|
|
|
|
Unlike the Tcl source command, "include" expands filenames with tilda '~'
|
|
and respects sta_continue_on_error.
|
|
|
|
Release 2.6.0 2024/07/22
|
|
-------------------------
|
|
|
|
The version of c++ used by OpenSTA is now 17.
|
|
The Cudd BBD packager is now required.
|
|
|
|
The USE_TCL_READLINE option defaults to ON.
|
|
|
|
The variable link_make_black_boxes has been removed.
|
|
Use the -no_black_boxes option to the link_design command.
|
|
|
|
link_design [-no_black_blocks] [top_cell_name]
|
|
|
|
The all_inputs command now supports -no_clocks to remove clocks
|
|
inputs from the returned list.
|
|
|
|
all_inputs [-no_clocks]
|
|
|
|
The read_power_activities command has been deprecated. Use read_vcd instead.
|
|
|
|
read_vcd [-scope scope] filename
|
|
|
|
The Switching Activity Interchange Format (SAIF) for reading power activities
|
|
is now supported by the the read_saif command.
|
|
|
|
read_saif [-scope scope] filename
|
|
|
|
The report_checks -group_count option has been renamed to -group_path_count.
|
|
The report_checks -endpoint_count option has been renamed to -endpoint_path_count.
|
|
|
|
The report_checks -field hierarchical_pins field reports hierarchical pins between
|
|
a driver and a load in the path report.
|
|
|
|
The suppress_msg and unsuppress_msg commands allow suppression/unsuppression of
|
|
warnings/errors by ID. Message IDs can be found in doc/messages.txt.
|
|
|
|
Release 2.5.0 2024/01/17
|
|
-------------------------
|
|
|
|
The report_net -connections, -verbose and -hier_pins flags are deprecated.
|
|
The report_instance -connections and -verbose flags are deprecated.
|
|
The options are now enabled in all cases.
|
|
|
|
The read_spef parasitic reduction arguments have changed. The
|
|
-reduce_to and -delete_after_reduce arguments are deprecated and
|
|
replaced with the -reduce flag. With the -reduce flag, the current
|
|
delay calculator reduces the parastic network to the appropriate type
|
|
and deletes the parasitic network.
|
|
|
|
The report_clock_skew and report_clock_latency commands now supports
|
|
the -include_internal_latency flag to control inclusion of macro
|
|
internal clock delays from the cell liberty min/max_clock_tree_path
|
|
timing groups.
|
|
|
|
report_clock_skew -include_internal_latency
|
|
report_clock_latency -include_internal_latency
|
|
|
|
The all_inputs command now supports the -no_clocks argument to exclude
|
|
clocks from the list.
|
|
|
|
all_inputs [-no_clocks]
|
|
|
|
The report_activity_annotation command reports power activity annotaton
|
|
from vcd, saif or the set_input_activity command.
|
|
|
|
report_activity_annotation [-report_unannotated] [-report_annotated]
|
|
|
|
Release 2.4.0 2023/01/19
|
|
-------------------------
|
|
|
|
The report_parasitics_annotation command reports SPEF annotation completeness.
|
|
|
|
report_parasitics_annotation [-report_unannotated]
|
|
|
|
The read_power_activities command reads a verilog vcd file and extracts
|
|
pin activities for power analysis.
|
|
|
|
read_power_activities -vcd filename
|
|
|
|
The report_cell command has been removed; use report_instance.
|
|
|
|
The read_liberty command latch inference (see OpenSTA.pdf) is now disabled by default.
|
|
The -no_latch_infer flag is deprecated.
|
|
To enable latch inference, use the -infer_latches flag.
|
|
|
|
The report fanout and capacitance fields are now shown on output pin lines rather
|
|
than net lines.
|
|
|
|
Release 2.3.3 2022/09/24
|
|
-------------------------
|
|
|
|
TCL readline support added. See README.md for build instructions.
|
|
|
|
Release 2.3.2 2022/07/03
|
|
-------------------------
|
|
|
|
The liberty default_wire_load is now ignored. You must explicitly set the wire load
|
|
model with the set_wire_load_model command to apply wire load model based parasitics.
|
|
|
|
Release 2.3.1 2020/11/08
|
|
-------------------------
|
|
|
|
The read_sdf command no longer supports the -analysis_type, -type, -min_type,
|
|
and -max_type arguments. Use the set_operating_conditions -analysis_type
|
|
command to set the analysis type before read_sdf.
|
|
|
|
Release 2.2.0 2020/07/18
|
|
-------------------------
|
|
|
|
The report_units reports the current units used by commands.
|
|
|
|
report_units
|
|
|
|
The report_check_types -min_fanout -max_fanout -max_capacitance -min_capacitance
|
|
|
|
report_check_types [-min_fanout] [-max_fanout] [-max_capacitance] [-min_capacitance]
|
|
|
|
|
|
The insert_buffer command is no longer supported.
|
|
|
|
Release 2.0.0 2018/09/28
|
|
-------------------------
|
|
|
|
The command line options have changed to the following:
|
|
|
|
-help show help and exit
|
|
-version show version and exit
|
|
-no_init do not read .sta init file
|
|
-threads count|max use count threads
|
|
-no_splash do not show the license splash at startup
|
|
-exit exit after reading cmd_file
|
|
cmd_file source cmd_file
|
|
|
|
|
|
....
|
|
|
|
Builds using Autotools/configure are no longer supported.
|
|
Use CMake as documented in README.md.
|
|
|
|
....
|
|
|
|
The check_timing command -no_output_delay checks output ports for
|
|
set_output_delay.
|
|
|
|
....
|
|
|
|
The report_power command reports the power consumption of the design
|
|
or a specific instance.
|
|
|
|
report_power [-instances inst] [-digits digits] [> filename] [>> filename]
|
|
|
|
The internal, switching, leakage and total power are reported. Design
|
|
power is reported separately for combinational, sequential, macro and
|
|
pad groups.
|
|
|
|
Use -instances to report power for a specific instance.
|
|
|
|
Use the set_power_activity command to specify activity/duty
|
|
globally using -global, the input port default using -input,
|
|
or for input ports using -input_ports, or pins using -pins.
|
|
|
|
set_power_activity [-global]
|
|
[-input]
|
|
[-input_ports ports]
|
|
[-pins pins]
|
|
[-activiity activity]
|
|
[-duty duty]
|
|
|
|
....
|
|
|
|
The write_path_spice command writes a spice netlist for a timing path.
|
|
|
|
write_path_spice -path_args path_args
|
|
-spice_directory spice_directory
|
|
-subckt_file subckt_file
|
|
-lib_subckt_file lib_subckts_file\
|
|
-model_file model_file
|
|
-power power
|
|
-ground ground
|
|
|
|
Use path_args to specify -from/-through/-to as arguments to the
|
|
find_timing_paths command. For each path, a spice netlist and the
|
|
subckts referenced by the path are written in spice_directory. The
|
|
spice netlist is written in path_<id>.sp and subckt file is
|
|
path_<id>.subckt.
|
|
|
|
Spice netlists for liberty library cells are read from
|
|
lib_subckts_file. The spice netlists used by the path are written to
|
|
subckt_file, which spice_file .includes. The device models used by the
|
|
spice subckt netlists in model_file are .included in spice_file. Power
|
|
and ground names are specified with the -power and -ground arguments.
|
|
The spice netlist includes a piecewise linear voltage source at the
|
|
input and .measure statement for each gate delay and pin slew.
|
|
|
|
....
|
|
|
|
The report_checks and report_check_types commands now support an
|
|
-unconstrained flag.
|
|
|
|
report_checks -unconstrained
|
|
report_check_types -unconstrained
|
|
|
|
The sta_report_unconstrained_paths variable will be supported for
|
|
for compatibility in the current release.
|
|
|
|
....
|
|
|
|
The transition_time path reporting field has been renamed to slew.
|
|
|
|
report_checks -fields {slew}
|
|
report_check_types -fields {slew}
|
|
|
|
...
|
|
|
|
The read_parasitics command has been renamed read_spef and no longer
|
|
supports the SPF format.
|
|
|
|
....
|
|
|
|
The make_instance command now takes a single instance name argument
|
|
and returns the instance.
|
|
|
|
make_instance instance_name
|
|
|
|
The make_net command now takes a single net name argument and returns
|
|
the net.
|
|
|
|
make_net net_name
|
|
|
|
The delete_instance command deletes a single instance instead of a list
|
|
of instances.
|
|
|
|
delete_instance instance
|
|
|
|
The delete_net command deletes a single net instead of a list
|
|
of nets.
|
|
|
|
delete_net net
|
|
|
|
The disconnect_pins command is renamed disconnect_pin and disconnects a
|
|
single pin.
|
|
|
|
disconnect_pin net pin
|
|
|
|
The report_tns and report_wns commands print the value returned by
|
|
total_negative_slack and worst_negative_slack respectively.
|
|
|
|
report_tns
|
|
report_wns
|
|
report_worst_slack
|
|
|
|
The set_clock_sense command was deprecated by SDC 2.1.
|
|
Use set_sense -type clock instead.
|
|
|
|
# Local Variables:
|
|
# mode:text
|
|
# End:
|