create_clock waveform checks
Signed-off-by: James Cherry <cherry@parallaxsw.com>
This commit is contained in:
James Cherry
parent
21ec025dab
commit
65feb976a5
232
messages.txt
232
messages.txt
|
|
@ -1,12 +1,12 @@
|
|||
0001 DmpCeff.cc:1589 cell %s delay model not supported on SPF parasitics by DMP delay calculator
|
||||
0008 ConcreteNetwork.cc:1867 cell type %s can not be linked.
|
||||
0008 ConcreteNetwork.cc:1869 cell type %s can not be linked.
|
||||
0009 Sdc.cc:2465 No common period was found between clocks %s and %s.
|
||||
0010 Genclks.cc:289 no master clock found for generated clock %s.
|
||||
0011 Genclks.cc:331 generated clock %s is in the fanout of multiple clocks.
|
||||
0013 Genclks.cc:990 generated clock %s source pin %s missing paths from master clock %s.
|
||||
0015 Sim.cc:868 propagated logic value %c differs from constraint value of %c on pin %s.
|
||||
0016 Sta.cc:2010 '%s' is not a valid startoint.
|
||||
0017 Sta.cc:2085 '%s' is not a valid endpoint.
|
||||
0015 Sim.cc:878 propagated logic value %c differs from constraint value of %c on pin %s.
|
||||
0016 Sta.cc:2013 '%s' is not a valid startoint.
|
||||
0017 Sta.cc:2088 '%s' is not a valid endpoint.
|
||||
0021 SpefParse.yy:805 %d is not positive.
|
||||
0022 SpefParse.yy:814 %.4f is not positive.
|
||||
0023 SpefParse.yy:820 %.4f is not positive.
|
||||
|
|
@ -16,8 +16,8 @@
|
|||
0027 WritePathSpice.cc:1016 no register/latch found for path from %s to %s,
|
||||
0028 WritePathSpice.cc:1383 The following subkcts are missing from %s
|
||||
0029 WritePathSpice.cc:1441 subckt %s port %s has no corresponding liberty port, pg_port and is not power or ground.
|
||||
0160 Sta.cc:2007 '%s' is not a valid startpoint.
|
||||
0161 Sta.cc:2082 '%s' is not a valid endpoint.
|
||||
0160 Sta.cc:2010 '%s' is not a valid startpoint.
|
||||
0161 Sta.cc:2085 '%s' is not a valid endpoint.
|
||||
0162 VerilogReader.cc:1744 %s is not a verilog module.
|
||||
0163 VerilogReader.cc:1749 %s is not a verilog module.
|
||||
0179 SpefReader.cc:723 %s.
|
||||
|
|
@ -31,9 +31,9 @@
|
|||
0211 SdcNetwork.cc:1026 inst path string lenth estimate busted
|
||||
0212 SdcNetwork.cc:1098 inst path string lenth estimate exceeded
|
||||
0213 Sdc.cc:4181 group path name and is_default are mutually exclusive.
|
||||
0214 WriteSdc.cc:1332 unknown exception type
|
||||
0215 WriteSdc.cc:1903 illegal set_logic value
|
||||
0216 WriteSdc.cc:1947 invalid set_case_analysis value
|
||||
0214 WriteSdc.cc:1339 unknown exception type
|
||||
0215 WriteSdc.cc:1910 illegal set_logic value
|
||||
0216 WriteSdc.cc:1954 invalid set_case_analysis value
|
||||
0228 Graph.cc:784 arc_delay_annotated array bounds exceeded
|
||||
0251 PathEnumed.cc:126 enumerated path required time
|
||||
0252 PathEnumed.cc:135 enumerated path required time
|
||||
|
|
@ -48,7 +48,7 @@
|
|||
0261 Search.cc:2895 max tag index exceeded
|
||||
0262 Search.cc:3579 unexpected filter path
|
||||
0263 Search.cc:3747 tns incr existing vertex
|
||||
0264 Sta.cc:3951 corresponding timing arc set not found in equiv cells
|
||||
0264 Sta.cc:3994 corresponding timing arc set not found in equiv cells
|
||||
0265 TagGroup.cc:337 tag group missing tag
|
||||
0300 Util.tcl:218 no commands match '$pattern'.
|
||||
0301 Power.tcl:207 activity should be 0.0 to 1.0 or 2.0
|
||||
|
|
@ -60,7 +60,7 @@
|
|||
0314 Cmds.tcl:850 $arg_name must be a single net.
|
||||
0315 Cmds.tcl:856 $arg_name '$object_type' is not a net.
|
||||
0316 Cmds.tcl:861 $arg_name '$arg' not found.
|
||||
0318 Search.tcl:1025 unknown path group '$name'.
|
||||
0318 Search.tcl:1043 unknown path group '$name'.
|
||||
0319 Sdc.tcl:277 $unit scale [format %.0e $scale] does not match library scale [format %.0e $unit_scale].
|
||||
0320 Sdc.tcl:478 current_design for other than top cell not supported.
|
||||
0321 Sdc.tcl:515 patterns argument not supported with -of_objects.
|
||||
|
|
@ -80,39 +80,40 @@
|
|||
0335 Sdc.tcl:937 pin '$pattern' not found.
|
||||
0336 Sdc.tcl:994 patterns argument not supported with -of_objects.
|
||||
0337 Sdc.tcl:1008 port '$pattern' not found.
|
||||
0338 Sdc.tcl:1109 adjusting non-increasing clock -waveform edge times.
|
||||
0339 Sdc.tcl:1113 -waveform time greater than two periods.
|
||||
0341 Sdc.tcl:1471 extra positional argument $arg.
|
||||
0342 Sdc.tcl:1504 -clock ignored for clock objects.
|
||||
0343 Sdc.tcl:1550 set_sense -type data not supported.
|
||||
0344 Sdc.tcl:1565 set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock.
|
||||
0345 Sdc.tcl:1577 -pulse argument not supported.
|
||||
0346 Sdc.tcl:1586 -positive, -negative, -stop_propagation and -pulse are mutually exclusive.
|
||||
0347 Sdc.tcl:1599 hierarchical pin '[get_full_name $pin]' not supported.
|
||||
0348 Sdc.tcl:1801 -from/-to keywords ignored for lib_pin, port and pin arguments.
|
||||
0349 Sdc.tcl:1469 unknown keyword argument $arg.
|
||||
0350 Sdc.tcl:1949 -from, -through or -to required.
|
||||
0351 Sdc.tcl:2028 -source_latency_included ignored with -reference_pin.
|
||||
0352 Sdc.tcl:2031 -network_latency_included ignored with -reference_pin.
|
||||
0353 Sdc.tcl:2050 $cmd not allowed on [pin_direction $pin] port '[get_full_name $pin]'.
|
||||
0354 Sdc.tcl:2052 $cmd relative to a clock defined on the same port/pin not allowed.
|
||||
0355 Sdc.tcl:2095 '$args' ignored.
|
||||
0356 Sdc.tcl:2225 '$args' ignored.
|
||||
0357 Sdc.tcl:2272 virtual clock [get_name $clk] can not be propagated.
|
||||
0358 Sdc.tcl:2421 -multiply_by ignored.
|
||||
0359 Sdc.tcl:2424 -dont_scale ignored.
|
||||
0360 Sdc.tcl:2427 -no_design_rule ignored.
|
||||
0361 Sdc.tcl:2468 -clock not supported.
|
||||
0362 Sdc.tcl:2471 -clock_fall not supported.
|
||||
0363 Sdc.tcl:2517 -pin_load not allowed for net objects.
|
||||
0364 Sdc.tcl:2520 -wire_load not allowed for net objects.
|
||||
0365 Sdc.tcl:2523 -rise/-fall not allowed for net objects.
|
||||
0366 Sdc.tcl:2656 -data_path, -clock_path, -rise, -fall ignored for ports and designs.
|
||||
0367 Sdc.tcl:2726 derating factor greater than 2.0.
|
||||
0368 Sdc.tcl:2763 -cell_delay and -cell_check flags ignored for net objects.
|
||||
0369 Sdc.tcl:2822 no valid objects specified for $key.
|
||||
0370 Sdc.tcl:2855 no valid objects specified for $key
|
||||
0371 Sdc.tcl:3016 set_wire_load_min_block_size not supported.
|
||||
0338 Sdc.tcl:1109 non-increasing clock -waveform edge times.
|
||||
0339 Sdc.tcl:1112 -waveform time greater than two periods.
|
||||
0340 Sdc.tcl:1106 negative clock -waveform edge time.
|
||||
0341 Sdc.tcl:1470 extra positional argument $arg.
|
||||
0342 Sdc.tcl:1503 -clock ignored for clock objects.
|
||||
0343 Sdc.tcl:1549 set_sense -type data not supported.
|
||||
0344 Sdc.tcl:1564 set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock.
|
||||
0345 Sdc.tcl:1576 -pulse argument not supported.
|
||||
0346 Sdc.tcl:1585 -positive, -negative, -stop_propagation and -pulse are mutually exclusive.
|
||||
0347 Sdc.tcl:1598 hierarchical pin '[get_full_name $pin]' not supported.
|
||||
0348 Sdc.tcl:1800 -from/-to keywords ignored for lib_pin, port and pin arguments.
|
||||
0349 Sdc.tcl:1468 unknown keyword argument $arg.
|
||||
0350 Sdc.tcl:1948 -from, -through or -to required.
|
||||
0351 Sdc.tcl:2027 -source_latency_included ignored with -reference_pin.
|
||||
0352 Sdc.tcl:2030 -network_latency_included ignored with -reference_pin.
|
||||
0353 Sdc.tcl:2049 $cmd not allowed on [pin_direction $pin] port '[get_full_name $pin]'.
|
||||
0354 Sdc.tcl:2051 $cmd relative to a clock defined on the same port/pin not allowed.
|
||||
0355 Sdc.tcl:2094 '$args' ignored.
|
||||
0356 Sdc.tcl:2224 '$args' ignored.
|
||||
0357 Sdc.tcl:2271 virtual clock [get_name $clk] can not be propagated.
|
||||
0358 Sdc.tcl:2420 -multiply_by ignored.
|
||||
0359 Sdc.tcl:2423 -dont_scale ignored.
|
||||
0360 Sdc.tcl:2426 -no_design_rule ignored.
|
||||
0361 Sdc.tcl:2467 -clock not supported.
|
||||
0362 Sdc.tcl:2470 -clock_fall not supported.
|
||||
0363 Sdc.tcl:2516 -pin_load not allowed for net objects.
|
||||
0364 Sdc.tcl:2519 -wire_load not allowed for net objects.
|
||||
0365 Sdc.tcl:2522 -rise/-fall not allowed for net objects.
|
||||
0366 Sdc.tcl:2655 -data_path, -clock_path, -rise, -fall ignored for ports and designs.
|
||||
0367 Sdc.tcl:2725 derating factor greater than 2.0.
|
||||
0368 Sdc.tcl:2762 -cell_delay and -cell_check flags ignored for net objects.
|
||||
0369 Sdc.tcl:2821 no valid objects specified for $key.
|
||||
0370 Sdc.tcl:2854 no valid objects specified for $key
|
||||
0371 Sdc.tcl:3015 set_wire_load_min_block_size not supported.
|
||||
0372 NetworkEdit.tcl:80 connect_pins is deprecated. Use connect_pin.
|
||||
0400 Util.tcl:44 $cmd $key missing value.
|
||||
0401 Util.tcl:61 $cmd $key missing value.
|
||||
|
|
@ -147,8 +148,8 @@
|
|||
0430 Sdf.tcl:60 -cond_use min_max cannot be used with analysis type single.
|
||||
0431 Sdf.tcl:108 $key must be sdf_min, sdf_typ, or sdf_max.
|
||||
0432 Sdf.tcl:210 SDF -divider must be / or .
|
||||
0433 Parasitics.tcl:46 path instance '$path' not found.
|
||||
0434 Parasitics.tcl:63 -reduce_to must be pi_elmore or pi_pole_residue2.
|
||||
0433 Parasitics.tcl:47 path instance '$path' not found.
|
||||
0434 Parasitics.tcl:65 -reduce_to must be pi_elmore or pi_pole_residue2.
|
||||
0435 DelayCalc.tcl:119 delay calculator $alg not found.
|
||||
0436 Variables.tcl:45 sta_report_default_digits must be a positive integer.
|
||||
0437 Variables.tcl:70 sta_crpr_mode must be pin or transition.
|
||||
|
|
@ -237,69 +238,69 @@
|
|||
0520 Sdc.tcl:1083 -name or port_pin_list must be specified.
|
||||
0521 Sdc.tcl:1091 missing -period argument.
|
||||
0522 Sdc.tcl:1097 -waveform edge_list must have an even number of edge times.
|
||||
0523 Sdc.tcl:1154 empty ports/pins/nets argument.
|
||||
0524 Sdc.tcl:1162 -add requires -name.
|
||||
0525 Sdc.tcl:1167 name or port_pin_list must be specified.
|
||||
0526 Sdc.tcl:1174 missing -source argument.
|
||||
0527 Sdc.tcl:1191 -master_clock argument empty.
|
||||
0528 Sdc.tcl:1194 -add requireds -master_clock.
|
||||
0529 Sdc.tcl:1198 -multiply_by and -divide_by options are exclusive.
|
||||
0530 Sdc.tcl:1202 -divide_by is not an integer greater than one.
|
||||
0531 Sdc.tcl:1205 -combinational implies -divide_by 1.
|
||||
0532 Sdc.tcl:1210 -multiply_by is not an integer greater than one.
|
||||
0533 Sdc.tcl:1216 -duty_cycle is not a float between 0 and 100.
|
||||
0534 Sdc.tcl:1222 -edges only supported for three edges.
|
||||
0535 Sdc.tcl:1228 edges times are not monotonically increasing.
|
||||
0536 Sdc.tcl:1237 -edge_shift length does not match -edges length.
|
||||
0537 Sdc.tcl:1243 missing -multiply_by, -divide_by, -combinational or -edges argument.
|
||||
0538 Sdc.tcl:1251 cannot specify -invert without -multiply_by, -divide_by or -combinational.
|
||||
0539 Sdc.tcl:1257 -duty_cycle requires -multiply_by value.
|
||||
0540 Sdc.tcl:1262 missing -pll_output argument.
|
||||
0541 Sdc.tcl:1265 missing -pll_feedback argument.
|
||||
0542 Sdc.tcl:1271 PLL output and feedback pins must be on the same instance.
|
||||
0543 Sdc.tcl:1274 source pin must be on the same instance as the PLL output pin.
|
||||
0544 Sdc.tcl:1277 PLL output must be one of the clock pins.
|
||||
0545 Sdc.tcl:1315 group_path command failed.
|
||||
0546 Sdc.tcl:1322 positional arguments not supported.
|
||||
0547 Sdc.tcl:1326 -from, -through or -to required.
|
||||
0548 Sdc.tcl:1332 -name and -default are mutually exclusive.
|
||||
0549 Sdc.tcl:1334 -name or -default option is required.
|
||||
0550 Sdc.tcl:1375 cannot specify both -high and -low.
|
||||
0551 Sdc.tcl:1383 missing -setup or -hold argument.
|
||||
0552 Sdc.tcl:1397 -high and -low only permitted for pins and instances.
|
||||
0553 Sdc.tcl:1404 -high and -low only permitted for pins and instances.
|
||||
0554 Sdc.tcl:1447 one of -logically_exclusive, -physically_exclusive or -asynchronous is required.
|
||||
0555 Sdc.tcl:1450 the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive.
|
||||
0556 Sdc.tcl:1518 -source '[get_full_name $pin]' is not a clock pin.
|
||||
0557 Sdc.tcl:1525 -early/-late is only allowed with -source.
|
||||
0558 Sdc.tcl:1554 set_sense -type clock|data
|
||||
0559 Sdc.tcl:1623 transition time can not be specified for virtual clocks.
|
||||
0560 Sdc.tcl:1644 missing uncertainty value.
|
||||
0561 Sdc.tcl:1686 -from/-to must be used together.
|
||||
0562 Sdc.tcl:1706 -rise, -fall options not allowed for single clock uncertainty.
|
||||
0563 Sdc.tcl:1747 missing -from, -rise_from or -fall_from argument.
|
||||
0564 Sdc.tcl:1759 missing -to, -rise_to or -fall_to argument.
|
||||
0565 Sdc.tcl:1831 -from/-to hierarchical instance not supported.
|
||||
0566 Sdc.tcl:1863 pin '[get_full_name $inst]${hierarchy_separator}${port_name}' not found.
|
||||
0567 Sdc.tcl:1904 pin '[get_name $cell]${hierarchy_separator}${port_name}' not found.
|
||||
0568 Sdc.tcl:2089 missing delay argument.
|
||||
0569 Sdc.tcl:2220 missing path multiplier argument.
|
||||
0570 Sdc.tcl:2232 cannot use -start with -end.
|
||||
0571 Sdc.tcl:2300 value must be 0, zero, 1, one, rise, rising, fall, or falling.
|
||||
0572 Sdc.tcl:2358 cell '$lib_name:$cell_name' not found.
|
||||
0573 Sdc.tcl:2364 '$cell_name' not found.
|
||||
0574 Sdc.tcl:2368 missing -lib_cell argument.
|
||||
0575 Sdc.tcl:2376 port '$to_port_name' not found.
|
||||
0576 Sdc.tcl:2388 -pin argument required for cells with multiple outputs.
|
||||
0577 Sdc.tcl:2403 port '$from_port_name' not found.
|
||||
0578 Sdc.tcl:2610 port '[get_name $port]' is not an input.
|
||||
0579 Sdc.tcl:2972 operating condition '$op_cond_name' not found.
|
||||
0580 Sdc.tcl:2990 operating condition '$op_cond_name' not found.
|
||||
0581 Sdc.tcl:3004 -analysis_type must be single, bc_wc or on_chip_variation.
|
||||
0582 Sdc.tcl:3029 mode must be top, enclosed or segmented.
|
||||
0583 Sdc.tcl:3044 no wire load model specified.
|
||||
0584 Sdc.tcl:3105 wire load selection group '$selection_name' not found.
|
||||
0585 Sdc.tcl:3233 no default operating conditions found.
|
||||
0523 Sdc.tcl:1153 empty ports/pins/nets argument.
|
||||
0524 Sdc.tcl:1161 -add requires -name.
|
||||
0525 Sdc.tcl:1166 name or port_pin_list must be specified.
|
||||
0526 Sdc.tcl:1173 missing -source argument.
|
||||
0527 Sdc.tcl:1190 -master_clock argument empty.
|
||||
0528 Sdc.tcl:1193 -add requireds -master_clock.
|
||||
0529 Sdc.tcl:1197 -multiply_by and -divide_by options are exclusive.
|
||||
0530 Sdc.tcl:1201 -divide_by is not an integer greater than one.
|
||||
0531 Sdc.tcl:1204 -combinational implies -divide_by 1.
|
||||
0532 Sdc.tcl:1209 -multiply_by is not an integer greater than one.
|
||||
0533 Sdc.tcl:1215 -duty_cycle is not a float between 0 and 100.
|
||||
0534 Sdc.tcl:1221 -edges only supported for three edges.
|
||||
0535 Sdc.tcl:1227 edges times are not monotonically increasing.
|
||||
0536 Sdc.tcl:1236 -edge_shift length does not match -edges length.
|
||||
0537 Sdc.tcl:1242 missing -multiply_by, -divide_by, -combinational or -edges argument.
|
||||
0538 Sdc.tcl:1250 cannot specify -invert without -multiply_by, -divide_by or -combinational.
|
||||
0539 Sdc.tcl:1256 -duty_cycle requires -multiply_by value.
|
||||
0540 Sdc.tcl:1261 missing -pll_output argument.
|
||||
0541 Sdc.tcl:1264 missing -pll_feedback argument.
|
||||
0542 Sdc.tcl:1270 PLL output and feedback pins must be on the same instance.
|
||||
0543 Sdc.tcl:1273 source pin must be on the same instance as the PLL output pin.
|
||||
0544 Sdc.tcl:1276 PLL output must be one of the clock pins.
|
||||
0545 Sdc.tcl:1314 group_path command failed.
|
||||
0546 Sdc.tcl:1321 positional arguments not supported.
|
||||
0547 Sdc.tcl:1325 -from, -through or -to required.
|
||||
0548 Sdc.tcl:1331 -name and -default are mutually exclusive.
|
||||
0549 Sdc.tcl:1333 -name or -default option is required.
|
||||
0550 Sdc.tcl:1374 cannot specify both -high and -low.
|
||||
0551 Sdc.tcl:1382 missing -setup or -hold argument.
|
||||
0552 Sdc.tcl:1396 -high and -low only permitted for pins and instances.
|
||||
0553 Sdc.tcl:1403 -high and -low only permitted for pins and instances.
|
||||
0554 Sdc.tcl:1446 one of -logically_exclusive, -physically_exclusive or -asynchronous is required.
|
||||
0555 Sdc.tcl:1449 the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive.
|
||||
0556 Sdc.tcl:1517 -source '[get_full_name $pin]' is not a clock pin.
|
||||
0557 Sdc.tcl:1524 -early/-late is only allowed with -source.
|
||||
0558 Sdc.tcl:1553 set_sense -type clock|data
|
||||
0559 Sdc.tcl:1622 transition time can not be specified for virtual clocks.
|
||||
0560 Sdc.tcl:1643 missing uncertainty value.
|
||||
0561 Sdc.tcl:1685 -from/-to must be used together.
|
||||
0562 Sdc.tcl:1705 -rise, -fall options not allowed for single clock uncertainty.
|
||||
0563 Sdc.tcl:1746 missing -from, -rise_from or -fall_from argument.
|
||||
0564 Sdc.tcl:1758 missing -to, -rise_to or -fall_to argument.
|
||||
0565 Sdc.tcl:1830 -from/-to hierarchical instance not supported.
|
||||
0566 Sdc.tcl:1862 pin '[get_full_name $inst]${hierarchy_separator}${port_name}' not found.
|
||||
0567 Sdc.tcl:1903 pin '[get_name $cell]${hierarchy_separator}${port_name}' not found.
|
||||
0568 Sdc.tcl:2088 missing delay argument.
|
||||
0569 Sdc.tcl:2219 missing path multiplier argument.
|
||||
0570 Sdc.tcl:2231 cannot use -start with -end.
|
||||
0571 Sdc.tcl:2299 value must be 0, zero, 1, one, rise, rising, fall, or falling.
|
||||
0572 Sdc.tcl:2357 cell '$lib_name:$cell_name' not found.
|
||||
0573 Sdc.tcl:2363 '$cell_name' not found.
|
||||
0574 Sdc.tcl:2367 missing -lib_cell argument.
|
||||
0575 Sdc.tcl:2375 port '$to_port_name' not found.
|
||||
0576 Sdc.tcl:2387 -pin argument required for cells with multiple outputs.
|
||||
0577 Sdc.tcl:2402 port '$from_port_name' not found.
|
||||
0578 Sdc.tcl:2609 port '[get_name $port]' is not an input.
|
||||
0579 Sdc.tcl:2971 operating condition '$op_cond_name' not found.
|
||||
0580 Sdc.tcl:2989 operating condition '$op_cond_name' not found.
|
||||
0581 Sdc.tcl:3003 -analysis_type must be single, bc_wc or on_chip_variation.
|
||||
0582 Sdc.tcl:3028 mode must be top, enclosed or segmented.
|
||||
0583 Sdc.tcl:3043 no wire load model specified.
|
||||
0584 Sdc.tcl:3104 wire load selection group '$selection_name' not found.
|
||||
0585 Sdc.tcl:3232 no default operating conditions found.
|
||||
0586 NetworkEdit.tcl:50 unsupported object type $object_type.
|
||||
0587 NetworkEdit.tcl:119 unsupported object type $object_type.
|
||||
0588 NetworkEdit.tcl:135 unsupported object type $object_type.
|
||||
|
|
@ -307,17 +308,17 @@
|
|||
0590 Network.tcl:55 instance $instance_path not found.
|
||||
0591 Network.tcl:283 net $net_path not found.
|
||||
0592 Network.tcl:286 net $net_path not found.
|
||||
0593 Link.tcl:28 missing top_cell_name argument and no current_design.
|
||||
0593 Link.tcl:34 missing top_cell_name argument and no current_design.
|
||||
0594 DelayNormal1.cc:203 unknown early/late value.
|
||||
0595 DelayNormal2.cc:378 unknown early/late value.
|
||||
0596 Sim.cc:199 unknown function operator
|
||||
0596 Sim.cc:200 unknown function operator
|
||||
0597 EstimateParasitics.cc:188 load pin not leaf or top level
|
||||
0600 Sdc.tcl:1945 '$args' ignored.
|
||||
0601 Sdc.tcl:2444 set_fanout_load not supported.
|
||||
0602 Sdc.tcl:2904 no valid objects specified for $key.
|
||||
0600 Sdc.tcl:1944 '$args' ignored.
|
||||
0601 Sdc.tcl:2443 set_fanout_load not supported.
|
||||
0602 Sdc.tcl:2903 no valid objects specified for $key.
|
||||
0603 NetworkEdit.tcl:172 disconnect_pins is deprecated. Use disconnect_pin.
|
||||
0604 Sdc.tcl:270 unknown $unit prefix '$prefix'.
|
||||
0605 Sdc.tcl:3066 wire load model '$model_name' not found.
|
||||
0605 Sdc.tcl:3065 wire load model '$model_name' not found.
|
||||
0606 Sta.tcl:1136 get_property unsupported object type $object_type.
|
||||
0607 StaTcl.i:4394 unknown report path field %s
|
||||
0608 StaTcl.i:4406 unknown report path field %s
|
||||
|
|
@ -328,3 +329,4 @@
|
|||
0613 Sdf.tcl:74 -min_type ignored by analysis_type single.
|
||||
0614 Sdf.tcl:77 -max_type ignored by analysis_type single.
|
||||
0615 Sdf.tcl:93 -type ignored by analysis_type $analysis_type.
|
||||
0616 Search.tcl:1022 specify one of -setup and -hold.
|
||||
|
|
|
|||
|
|
@ -1102,15 +1102,14 @@ proc create_clock { args } {
|
|||
foreach edge $wave_arg {
|
||||
check_float "-waveform edge" $edge
|
||||
set edge [time_ui_sta $edge]
|
||||
if { $first_edge && $edge > $period } {
|
||||
set edge [expr $edge - $period]
|
||||
if { $edge < 0 } {
|
||||
sta_error 340 "negative clock -waveform edge time."
|
||||
}
|
||||
if { !$first_edge && $edge < $prev_edge } {
|
||||
sta_warn 338 "adjusting non-increasing clock -waveform edge times."
|
||||
set edge [expr $edge + $period]
|
||||
sta_error 338 "non-increasing clock -waveform edge times."
|
||||
}
|
||||
if { $edge > [expr $period * 2] } {
|
||||
sta_warn 339 "-waveform time greater than two periods."
|
||||
sta_error 339 "-waveform time greater than two periods."
|
||||
}
|
||||
lappend waveform $edge
|
||||
set prev_edge $edge
|
||||
|
|
|
|||
Loading…
Reference in New Issue