mirror of https://github.com/VLSIDA/OpenRAM.git
1082 lines
50 KiB
Python
1082 lines
50 KiB
Python
import sys,re,shutil
|
|
import debug
|
|
import tech
|
|
import math
|
|
from .stimuli import *
|
|
from .trim_spice import *
|
|
from .charutils import *
|
|
import utils
|
|
from globals import OPTS
|
|
|
|
class delay():
|
|
"""Functions to measure the delay and power of an SRAM at a given address and
|
|
data bit.
|
|
|
|
In general, this will perform the following actions:
|
|
1) Trim the netlist to remove unnecessary logic.
|
|
2) Find a feasible clock period using max load/slew on the trimmed netlist.
|
|
3) Characterize all loads/slews and consider fail when delay is greater than 5% of feasible delay using trimmed netlist.
|
|
4) Measure the leakage during the last cycle of the trimmed netlist when there is no operation.
|
|
5) Measure the leakage of the whole netlist (untrimmed) in each corner.
|
|
6) Subtract the trimmed leakage and add the untrimmed leakage to the power.
|
|
|
|
Netlist trimming can be removed by setting OPTS.trim_netlist to
|
|
False, but this is VERY slow.
|
|
|
|
"""
|
|
|
|
def __init__(self, sram, spfile, corner):
|
|
self.sram = sram
|
|
self.name = sram.name
|
|
self.word_size = self.sram.word_size
|
|
self.addr_size = self.sram.addr_size
|
|
self.num_cols = self.sram.num_cols
|
|
self.num_rows = self.sram.num_rows
|
|
self.num_banks = self.sram.num_banks
|
|
self.sp_file = spfile
|
|
|
|
self.total_ports = self.sram.total_ports
|
|
self.total_write = self.sram.total_write
|
|
self.total_read = self.sram.total_read
|
|
self.read_index = self.sram.read_index
|
|
self.write_index = self.sram.write_index
|
|
self.port_id = self.sram.port_id
|
|
|
|
# These are the member variables for a simulation
|
|
self.period = 0
|
|
self.set_load_slew(0,0)
|
|
self.set_corner(corner)
|
|
self.create_port_names()
|
|
self.create_signal_names()
|
|
|
|
#Only used to instantiate SRAM in stim file.
|
|
#self.create_pin_names()
|
|
|
|
#Create global measure names. Should maybe be an input at some point.
|
|
self.create_measurement_names()
|
|
|
|
def create_measurement_names(self):
|
|
"""Create measurement names. The names themselves currently define the type of measurement"""
|
|
#Altering the names will crash the characterizer. TODO: object orientated approach to the measurements.
|
|
self.delay_meas_names = ["delay_lh", "delay_hl", "slew_lh", "slew_hl"]
|
|
self.power_meas_names = ["read0_power", "read1_power", "write0_power", "write1_power"]
|
|
|
|
def create_signal_names(self):
|
|
self.addr_name = "A"
|
|
self.din_name = "DIN"
|
|
self.dout_name = "DOUT"
|
|
|
|
#This is TODO once multiport control has been finalized.
|
|
#self.control_name = "CSB"
|
|
|
|
def create_pin_names(self):
|
|
"""Creates the pins names of the SRAM based on the no. of ports"""
|
|
self.pin_names = []
|
|
|
|
for write_input in self.write_ports:
|
|
for i in range(self.word_size):
|
|
self.pin_names.append("{0}{1}_{2}".format(self.din_name,write_input, i))
|
|
|
|
for port in range(self.total_port_num):
|
|
for i in range(self.addr_size):
|
|
self.pin_names.append("{0}{1}_{2}".format(self.addr_name,port,i))
|
|
|
|
#Control signals not finalized.
|
|
for port in range(self.total_port_num):
|
|
self.pin_names.append("CSB{0}".format(port))
|
|
for readwrite_port in range(self.readwrite_port_num):
|
|
self.pin_names.append("WEB{0}".format(readwrite_port))
|
|
|
|
self.pin_names.append("{0}".format(tech.spice["clk"]))
|
|
for read_output in self.read_ports:
|
|
for i in range(self.word_size):
|
|
self.pin_names.append("{0}{1}_{2}".format(self.dout_name,read_output, i))
|
|
|
|
self.pin_names.append("{0}".format(tech.spice["vdd_name"]))
|
|
self.pin_names.append("{0}".format(tech.spice["gnd_name"]))
|
|
|
|
#Only checking length. This should check functionality as well (TODO) and/or import that information from the SRAM
|
|
debug.check(len(self.sram.pins) == len(self.pin_names), "Number of pins generated for characterization do match pins of SRAM")
|
|
|
|
def create_port_names(self):
|
|
"""Generates the port names to be used in characterization and sets default simulation target ports"""
|
|
self.write_ports = []
|
|
self.read_ports = []
|
|
self.total_port_num = OPTS.num_rw_ports + OPTS.num_w_ports + OPTS.num_r_ports
|
|
|
|
#save a member variable to avoid accessing global. readwrite ports have different control signals.
|
|
self.readwrite_port_num = OPTS.num_rw_ports
|
|
|
|
#Generate the port names. readwrite ports are required to be added first for this to work.
|
|
for readwrite_port_num in range(OPTS.num_rw_ports):
|
|
self.read_ports.append(readwrite_port_num)
|
|
self.write_ports.append(readwrite_port_num)
|
|
#This placement is intentional. It makes indexing input data easier. See self.data_values
|
|
for write_port_num in range(OPTS.num_rw_ports, OPTS.num_rw_ports+OPTS.num_w_ports):
|
|
self.write_ports.append(write_port_num)
|
|
for read_port_num in range(OPTS.num_rw_ports+OPTS.num_w_ports, OPTS.num_rw_ports+OPTS.num_w_ports+OPTS.num_r_ports):
|
|
self.read_ports.append(read_port_num)
|
|
|
|
#Set the default target ports for simulation. Default is all the ports.
|
|
self.targ_read_ports = self.read_ports
|
|
self.targ_write_ports = self.write_ports
|
|
|
|
def set_corner(self,corner):
|
|
""" Set the corner values """
|
|
self.corner = corner
|
|
(self.process, self.vdd_voltage, self.temperature) = corner
|
|
|
|
def set_load_slew(self,load,slew):
|
|
""" Set the load and slew """
|
|
self.load = load
|
|
self.slew = slew
|
|
|
|
def check_arguments(self):
|
|
"""Checks if arguments given for write_stimulus() meets requirements"""
|
|
try:
|
|
int(self.probe_address, 2)
|
|
except ValueError:
|
|
debug.error("Probe Address is not of binary form: {0}".format(self.probe_address),1)
|
|
|
|
if len(self.probe_address) != self.addr_size:
|
|
debug.error("Probe Address's number of bits does not correspond to given SRAM",1)
|
|
|
|
if not isinstance(self.probe_data, int) or self.probe_data>self.word_size or self.probe_data<0:
|
|
debug.error("Given probe_data is not an integer to specify a data bit",1)
|
|
|
|
#Adding port options here which the characterizer cannot handle. Some may be added later like ROM
|
|
if len(self.read_ports) == 0:
|
|
debug.error("Characterizer does not currently support SRAMs without read ports.",1)
|
|
if len(self.write_ports) == 0:
|
|
debug.error("Characterizer does not currently support SRAMs without write ports.",1)
|
|
|
|
def write_generic_stimulus(self):
|
|
""" Create the instance, supplies, loads, and access transistors. """
|
|
|
|
# add vdd/gnd statements
|
|
self.sf.write("\n* Global Power Supplies\n")
|
|
self.stim.write_supply()
|
|
|
|
# instantiate the sram
|
|
self.sf.write("\n* Instantiation of the SRAM\n")
|
|
self.stim.inst_sram(sram=self.sram,
|
|
port_signal_names=(self.addr_name,self.din_name,self.dout_name),
|
|
port_info=(self.total_port_num,self.write_ports,self.read_ports),
|
|
abits=self.addr_size,
|
|
dbits=self.word_size,
|
|
sram_name=self.name)
|
|
self.sf.write("\n* SRAM output loads\n")
|
|
for port in self.read_ports:
|
|
for i in range(self.word_size):
|
|
self.sf.write("CD{0}{1} {2}{0}_{1} 0 {3}f\n".format(port,i,self.dout_name,self.load))
|
|
|
|
|
|
def write_delay_stimulus(self):
|
|
""" Creates a stimulus file for simulations to probe a bitcell at a given clock period.
|
|
Address and bit were previously set with set_probe().
|
|
Input slew (in ns) and output capacitive load (in fF) are required for charaterization.
|
|
"""
|
|
self.check_arguments()
|
|
|
|
# obtains list of time-points for each rising clk edge
|
|
self.create_test_cycles()
|
|
|
|
# creates and opens stimulus file for writing
|
|
temp_stim = "{0}/stim.sp".format(OPTS.openram_temp)
|
|
self.sf = open(temp_stim, "w")
|
|
self.sf.write("* Delay stimulus for period of {0}n load={1}fF slew={2}ns\n\n".format(self.period,
|
|
self.load,
|
|
self.slew))
|
|
self.stim = stimuli(self.sf, self.corner)
|
|
# include files in stimulus file
|
|
self.stim.write_include(self.trim_sp_file)
|
|
|
|
self.write_generic_stimulus()
|
|
|
|
# generate data and addr signals
|
|
self.sf.write("\n* Generation of data and address signals\n")
|
|
self.gen_data()
|
|
self.gen_addr()
|
|
|
|
|
|
# generate control signals
|
|
self.sf.write("\n* Generation of control signals\n")
|
|
self.gen_control()
|
|
|
|
self.sf.write("\n* Generation of global clock signal\n")
|
|
self.stim.gen_pulse(sig_name="CLK",
|
|
v1=0,
|
|
v2=self.vdd_voltage,
|
|
offset=self.period,
|
|
period=self.period,
|
|
t_rise=self.slew,
|
|
t_fall=self.slew)
|
|
|
|
self.write_delay_measures()
|
|
|
|
# run until the end of the cycle time
|
|
self.stim.write_control(self.cycle_times[-1] + self.period)
|
|
|
|
self.sf.close()
|
|
|
|
|
|
def write_power_stimulus(self, trim):
|
|
""" Creates a stimulus file to measure leakage power only.
|
|
This works on the *untrimmed netlist*.
|
|
"""
|
|
self.check_arguments()
|
|
|
|
# obtains list of time-points for each rising clk edge
|
|
#self.create_test_cycles()
|
|
|
|
# creates and opens stimulus file for writing
|
|
temp_stim = "{0}/stim.sp".format(OPTS.openram_temp)
|
|
self.sf = open(temp_stim, "w")
|
|
self.sf.write("* Power stimulus for period of {0}n\n\n".format(self.period))
|
|
self.stim = stimuli(self.sf, self.corner)
|
|
|
|
# include UNTRIMMED files in stimulus file
|
|
if trim:
|
|
self.stim.write_include(self.trim_sp_file)
|
|
else:
|
|
self.stim.write_include(self.sim_sp_file)
|
|
|
|
self.write_generic_stimulus()
|
|
|
|
# generate data and addr signals
|
|
self.sf.write("\n* Generation of data and address signals\n")
|
|
for write_port in self.write_ports:
|
|
for i in range(self.word_size):
|
|
self.stim.gen_constant(sig_name="{0}{1}_{2} ".format(self.din_name,write_port, i),
|
|
v_val=0)
|
|
for port in range(self.total_port_num):
|
|
for i in range(self.addr_size):
|
|
self.stim.gen_constant(sig_name="{0}{1}_{2}".format(self.addr_name,port, i),
|
|
v_val=0)
|
|
|
|
# generate control signals
|
|
self.sf.write("\n* Generation of control signals\n")
|
|
for port in range(self.total_port_num):
|
|
self.stim.gen_constant(sig_name="CSB{0}".format(port), v_val=self.vdd_voltage)
|
|
if port in self.read_ports and port in self.write_ports:
|
|
self.stim.gen_constant(sig_name="WEB{0}".format(port), v_val=self.vdd_voltage)
|
|
|
|
self.sf.write("\n* Generation of global clock signal\n")
|
|
self.stim.gen_constant(sig_name="CLK", v_val=0)
|
|
|
|
self.write_power_measures()
|
|
|
|
# run until the end of the cycle time
|
|
self.stim.write_control(2*self.period)
|
|
|
|
self.sf.close()
|
|
|
|
def get_delay_meas_values(self, delay_name, port):
|
|
"""Get the values needed to generate a Spice measurement statement based on the name of the measurement."""
|
|
debug.check('lh' in delay_name or 'hl' in delay_name, "Measure command {0} does not contain direction (lh/hl)")
|
|
trig_clk_name = "clk"
|
|
meas_name="{0}{1}".format(delay_name, port)
|
|
targ_name = "{0}".format("{0}{1}_{2}".format(self.dout_name,port,self.probe_data))
|
|
half_vdd = 0.5 * self.vdd_voltage
|
|
trig_slew_low = 0.1 * self.vdd_voltage
|
|
targ_slew_high = 0.9 * self.vdd_voltage
|
|
if 'delay' in delay_name:
|
|
trig_dir="RISE"
|
|
trig_val = half_vdd
|
|
targ_val = half_vdd
|
|
trig_name = trig_clk_name
|
|
if 'lh' in delay_name:
|
|
targ_dir="RISE"
|
|
trig_td = targ_td = self.cycle_times[self.measure_cycles["read1_{0}".format(port)]]
|
|
else:
|
|
targ_dir="FALL"
|
|
trig_td = targ_td = self.cycle_times[self.measure_cycles["read0_{0}".format(port)]]
|
|
|
|
elif 'slew' in delay_name:
|
|
trig_name = targ_name
|
|
if 'lh' in delay_name:
|
|
trig_val = trig_slew_low
|
|
targ_val = targ_slew_high
|
|
targ_dir = trig_dir = "RISE"
|
|
trig_td = targ_td = self.cycle_times[self.measure_cycles["read1_{0}".format(port)]]
|
|
else:
|
|
trig_val = targ_slew_high
|
|
targ_val = trig_slew_low
|
|
targ_dir = trig_dir = "FALL"
|
|
trig_td = targ_td = self.cycle_times[self.measure_cycles["read0_{0}".format(port)]]
|
|
else:
|
|
debug.error(1, "Measure command {0} not recognized".format(delay_name))
|
|
return (meas_name,trig_name,targ_name,trig_val,targ_val,trig_dir,targ_dir,trig_td,targ_td)
|
|
|
|
def write_delay_measures_read_port(self, port):
|
|
"""
|
|
Write the measure statements to quantify the delay and power results for a read port.
|
|
"""
|
|
# add measure statements for delays/slews
|
|
for dname in self.delay_meas_names:
|
|
meas_values = self.get_delay_meas_values(dname, port)
|
|
self.stim.gen_meas_delay(*meas_values)
|
|
|
|
# add measure statements for power
|
|
for pname in self.power_meas_names:
|
|
if "read" not in pname:
|
|
continue
|
|
#Different naming schemes are used for the measure cycle dict and measurement names.
|
|
#TODO: make them the same so they can be indexed the same.
|
|
if '1' in pname:
|
|
t_initial = self.cycle_times[self.measure_cycles["read1_{0}".format(port)]]
|
|
t_final = self.cycle_times[self.measure_cycles["read1_{0}".format(port)]+1]
|
|
elif '0' in pname:
|
|
t_initial = self.cycle_times[self.measure_cycles["read0_{0}".format(port)]]
|
|
t_final = self.cycle_times[self.measure_cycles["read0_{0}".format(port)]+1]
|
|
self.stim.gen_meas_power(meas_name="{0}{1}".format(pname, port),
|
|
t_initial=t_initial,
|
|
t_final=t_final)
|
|
|
|
def write_delay_measures_write_port(self, port):
|
|
"""
|
|
Write the measure statements to quantify the power results for a write port.
|
|
"""
|
|
# add measure statements for power
|
|
for pname in self.power_meas_names:
|
|
if "write" not in pname:
|
|
continue
|
|
t_initial = self.cycle_times[self.measure_cycles["write0_{0}".format(port)]]
|
|
t_final = self.cycle_times[self.measure_cycles["write0_{0}".format(port)]+1]
|
|
if '1' in pname:
|
|
t_initial = self.cycle_times[self.measure_cycles["write1_{0}".format(port)]]
|
|
t_final = self.cycle_times[self.measure_cycles["write1_{0}".format(port)]+1]
|
|
|
|
self.stim.gen_meas_power(meas_name="{0}{1}".format(pname, port),
|
|
t_initial=t_initial,
|
|
t_final=t_final)
|
|
|
|
def write_delay_measures(self):
|
|
"""
|
|
Write the measure statements to quantify the delay and power results for all targeted ports.
|
|
"""
|
|
self.sf.write("\n* Measure statements for delay and power\n")
|
|
|
|
# Output some comments to aid where cycles start and
|
|
# what is happening
|
|
for comment in self.cycle_comments:
|
|
self.sf.write("* {}\n".format(comment))
|
|
|
|
for read_port in self.targ_read_ports:
|
|
self.write_delay_measures_read_port(read_port)
|
|
for write_port in self.targ_write_ports:
|
|
self.write_delay_measures_write_port(write_port)
|
|
|
|
|
|
def write_power_measures(self):
|
|
"""
|
|
Write the measure statements to quantify the leakage power only.
|
|
"""
|
|
|
|
self.sf.write("\n* Measure statements for idle leakage power\n")
|
|
|
|
# add measure statements for power
|
|
t_initial = self.period
|
|
t_final = 2*self.period
|
|
self.stim.gen_meas_power(meas_name="leakage_power",
|
|
t_initial=t_initial,
|
|
t_final=t_final)
|
|
|
|
def find_feasible_period_one_port(self, port):
|
|
"""
|
|
Uses an initial period and finds a feasible period before we
|
|
run the binary search algorithm to find min period. We check if
|
|
the given clock period is valid and if it's not, we continue to
|
|
double the period until we find a valid period to use as a
|
|
starting point.
|
|
"""
|
|
debug.check(port in self.read_ports, "Characterizer requires a read port to determine a period.")
|
|
|
|
feasible_period = float(tech.spice["feasible_period"])
|
|
#feasible_period = float(2.5)#What happens if feasible starting point is wrong?
|
|
time_out = 9
|
|
while True:
|
|
time_out -= 1
|
|
if (time_out <= 0):
|
|
debug.error("Timed out, could not find a feasible period.",2)
|
|
|
|
#Clear any write target ports and set read port
|
|
self.targ_write_ports = []
|
|
self.targ_read_ports = [port]
|
|
success = False
|
|
|
|
debug.info(1, "Trying feasible period: {0}ns on Port {1}".format(feasible_period, port))
|
|
self.period = feasible_period
|
|
(success, results)=self.run_delay_simulation()
|
|
#Clear these target ports after simulation
|
|
self.targ_read_ports = []
|
|
|
|
if not success:
|
|
feasible_period = 2 * feasible_period
|
|
continue
|
|
|
|
#Positions of measurements currently hardcoded. First 2 are delays, next 2 are slews
|
|
feasible_delays = [results[port][mname] for mname in self.delay_meas_names if "delay" in mname]
|
|
feasible_slews = [results[port][mname] for mname in self.delay_meas_names if "slew" in mname]
|
|
delay_str = "feasible_delay {0:.4f}ns/{1:.4f}ns".format(*feasible_delays)
|
|
slew_str = "slew {0:.4f}ns/{1:.4f}ns".format(*feasible_slews)
|
|
debug.info(2, "feasible_period passed for Port {3}: {0}ns {1} {2} ".format(feasible_period,
|
|
delay_str,
|
|
slew_str,
|
|
port))
|
|
|
|
if success:
|
|
debug.info(1, "Found feasible_period: {0}ns".format(feasible_period))
|
|
self.period = feasible_period
|
|
return results
|
|
|
|
def find_feasible_period(self):
|
|
"""
|
|
Loops through all read ports determining the feasible period and collecting
|
|
delay information from each port.
|
|
"""
|
|
self.period = float(tech.spice["feasible_period"])
|
|
|
|
#Get initial feasible delays from first port
|
|
feasible_delays = self.find_feasible_period_one_port(self.read_ports[0])
|
|
previous_period = self.period
|
|
|
|
|
|
#Loops through all the ports checks if the feasible period works. Everything restarts it if does not.
|
|
#Write ports do not produce delays which is why they are not included here.
|
|
i = 1
|
|
while i < len(self.read_ports):
|
|
port = self.read_ports[i]
|
|
feasible_delays[port].update(self.find_feasible_period_one_port(port))
|
|
#Function sets the period. Restart the entire process if period changes to collect accurate delays
|
|
if self.period > previous_period:
|
|
i = 0
|
|
else:
|
|
i+=1
|
|
previous_period = self.period
|
|
return feasible_delays
|
|
|
|
|
|
def parse_values(self, values_names, port, mult = 1.0):
|
|
"""Parse multiple values in the timing output file. Optional multiplier.
|
|
Return a dict of the input names and values. Port used for parsing file.
|
|
"""
|
|
values = []
|
|
all_values_floats = True
|
|
for vname in values_names:
|
|
#ngspice converts all measure characters to lowercase, not tested on other sims
|
|
value = parse_spice_list("timing", "{0}{1}".format(vname.lower(), port))
|
|
#Check if any of the values fail to parse
|
|
if type(value)!=float:
|
|
all_values_floats = False
|
|
values.append(value)
|
|
|
|
#Apply Multiplier only if all values are floats. Let other check functions handle this error.
|
|
if all_values_floats:
|
|
return {values_names[i]:values[i]*mult for i in range(len(values))}
|
|
else:
|
|
return {values_names[i]:values[i] for i in range(len(values))}
|
|
|
|
def run_delay_simulation(self):
|
|
"""
|
|
This tries to simulate a period and checks if the result works. If
|
|
so, it returns True and the delays, slews, and powers. It
|
|
works on the trimmed netlist by default, so powers do not
|
|
include leakage of all cells.
|
|
"""
|
|
#Sanity Check
|
|
debug.check(self.period > 0, "Target simulation period non-positive")
|
|
|
|
result = [{} for i in range(self.total_port_num)]
|
|
# Checking from not data_value to data_value
|
|
self.write_delay_stimulus()
|
|
|
|
self.stim.run_sim()
|
|
|
|
#Loop through all targeted ports and collect delays and powers.
|
|
#Too much duplicate code here. Try reducing
|
|
for port in self.targ_read_ports:
|
|
delay_names = ["{0}{1}".format(mname,port) for mname in self.delay_meas_names]
|
|
delay_names = [mname for mname in self.delay_meas_names]
|
|
delays = self.parse_values(delay_names, port, 1e9) # scale delays to ns
|
|
if not self.check_valid_delays(tuple(delays.values())):
|
|
return (False,{})
|
|
result[port].update(delays)
|
|
|
|
power_names = [mname for mname in self.power_meas_names if 'read' in mname]
|
|
powers = self.parse_values(power_names, port, 1e3) # scale power to mw
|
|
#Check that power parsing worked.
|
|
for name, power in powers.items():
|
|
if type(power)!=float:
|
|
debug.error("Failed to Parse Power Values:\n\t\t{0}".format(powers),1) #Printing the entire dict looks bad.
|
|
result[port].update(powers)
|
|
|
|
for port in self.targ_write_ports:
|
|
power_names = [mname for mname in self.power_meas_names if 'write' in mname]
|
|
powers = self.parse_values(power_names, port, 1e3) # scale power to mw
|
|
#Check that power parsing worked.
|
|
for name, power in powers.items():
|
|
if type(power)!=float:
|
|
debug.error("Failed to Parse Power Values:\n\t\t{0}".format(powers),1) #Printing the entire dict looks bad.
|
|
result[port].update(powers)
|
|
|
|
# The delay is from the negative edge for our SRAM
|
|
return (True,result)
|
|
|
|
|
|
def run_power_simulation(self):
|
|
"""
|
|
This simulates a disabled SRAM to get the leakage power when it is off.
|
|
|
|
"""
|
|
debug.info(1, "Performing leakage power simulations.")
|
|
self.write_power_stimulus(trim=False)
|
|
self.stim.run_sim()
|
|
leakage_power=parse_spice_list("timing", "leakage_power")
|
|
debug.check(leakage_power!="Failed","Could not measure leakage power.")
|
|
debug.info(1, "Leakage power of full array is {0} mW".format(leakage_power*1e3))
|
|
#debug
|
|
#sys.exit(1)
|
|
|
|
self.write_power_stimulus(trim=True)
|
|
self.stim.run_sim()
|
|
trim_leakage_power=parse_spice_list("timing", "leakage_power")
|
|
debug.check(trim_leakage_power!="Failed","Could not measure leakage power.")
|
|
debug.info(1, "Leakage power of trimmed array is {0} mW".format(trim_leakage_power*1e3))
|
|
|
|
# For debug, you sometimes want to inspect each simulation.
|
|
#key=raw_input("press return to continue")
|
|
return (leakage_power*1e3, trim_leakage_power*1e3)
|
|
|
|
def check_valid_delays(self, delay_tuple):
|
|
""" Check if the measurements are defined and if they are valid. """
|
|
|
|
(delay_hl, delay_lh, slew_hl, slew_lh) = delay_tuple
|
|
period_load_slew_str = "period {0} load {1} slew {2}".format(self.period,self.load, self.slew)
|
|
|
|
# if it failed or the read was longer than a period
|
|
if type(delay_hl)!=float or type(delay_lh)!=float or type(slew_lh)!=float or type(slew_hl)!=float:
|
|
delays_str = "delay_hl={0} delay_lh={1}".format(delay_hl, delay_lh)
|
|
slews_str = "slew_hl={0} slew_lh={1}".format(slew_hl,slew_lh)
|
|
debug.info(2,"Failed simulation (in sec):\n\t\t{0}\n\t\t{1}\n\t\t{2}".format(period_load_slew_str,
|
|
delays_str,
|
|
slews_str))
|
|
return False
|
|
|
|
delays_str = "delay_hl={0} delay_lh={1}".format(delay_hl, delay_lh)
|
|
slews_str = "slew_hl={0} slew_lh={1}".format(slew_hl,slew_lh)
|
|
if delay_hl>self.period or delay_lh>self.period or slew_hl>self.period or slew_lh>self.period:
|
|
debug.info(2,"UNsuccessful simulation (in ns):\n\t\t{0}\n\t\t{1}\n\t\t{2}".format(period_load_slew_str,
|
|
delays_str,
|
|
slews_str))
|
|
return False
|
|
else:
|
|
debug.info(2,"Successful simulation (in ns):\n\t\t{0}\n\t\t{1}\n\t\t{2}".format(period_load_slew_str,
|
|
delays_str,
|
|
slews_str))
|
|
|
|
return True
|
|
|
|
def find_min_period(self, feasible_delays):
|
|
"""
|
|
Determine the minimum period for all ports.
|
|
"""
|
|
|
|
feasible_period = ub_period = self.period
|
|
lb_period = 0.0
|
|
target_period = 0.5 * (ub_period + lb_period)
|
|
|
|
#Find the minimum period for all ports. Start at one port and perform binary search then use that delay as a starting position.
|
|
#For testing purposes, only checks read ports.
|
|
for port in self.read_ports:
|
|
target_period = self.find_min_period_one_port(feasible_delays, port, lb_period, ub_period, target_period)
|
|
#The min period of one port becomes the new lower bound. Reset the upper_bound.
|
|
lb_period = target_period
|
|
ub_period = feasible_period
|
|
|
|
#Clear the target ports before leaving
|
|
self.targ_read_ports = []
|
|
self.targ_write_ports = []
|
|
return target_period
|
|
|
|
def find_min_period_one_port(self, feasible_delays, port, lb_period, ub_period, target_period):
|
|
"""
|
|
Searches for the smallest period with output delays being within 5% of
|
|
long period. For the current logic to characterize multiport, bound are required as an input.
|
|
"""
|
|
|
|
#previous_period = ub_period = self.period
|
|
#ub_period = self.period
|
|
#lb_period = 0.0
|
|
#target_period = 0.5 * (ub_period + lb_period)
|
|
|
|
# Binary search algorithm to find the min period (max frequency) of input port
|
|
time_out = 25
|
|
self.targ_read_ports = [port]
|
|
while True:
|
|
time_out -= 1
|
|
if (time_out <= 0):
|
|
debug.error("Timed out, could not converge on minimum period.",2)
|
|
|
|
self.period = target_period
|
|
debug.info(1, "MinPeriod Search Port {3}: {0}ns (ub: {1} lb: {2})".format(target_period,
|
|
ub_period,
|
|
lb_period,
|
|
port))
|
|
|
|
if self.try_period(feasible_delays):
|
|
ub_period = target_period
|
|
else:
|
|
lb_period = target_period
|
|
|
|
if relative_compare(ub_period, lb_period, error_tolerance=0.05):
|
|
# ub_period is always feasible.
|
|
return ub_period
|
|
|
|
#Update target
|
|
target_period = 0.5 * (ub_period + lb_period)
|
|
|
|
|
|
def try_period(self, feasible_delays):
|
|
"""
|
|
This tries to simulate a period and checks if the result
|
|
works. If it does and the delay is within 5% still, it returns True.
|
|
"""
|
|
# Run Delay simulation but Power results not used.
|
|
(success, results) = self.run_delay_simulation()
|
|
if not success:
|
|
return False
|
|
|
|
#Check the values of target readwrite and read ports. Write ports do not produce delays in this current version
|
|
for port in self.targ_read_ports:
|
|
delay_port_names = [mname for mname in self.delay_meas_names if "delay" in mname]
|
|
for dname in delay_port_names:
|
|
if not relative_compare(results[port][dname],feasible_delays[port][dname],error_tolerance=0.05):
|
|
debug.info(2,"Delay too big {0} vs {1}".format(results[port][dname],feasible_delays[port][dname]))
|
|
return False
|
|
|
|
#key=raw_input("press return to continue")
|
|
|
|
#Dynamic way to build string. A bit messy though.
|
|
delay_str = ', '.join("{0}={1}ns".format(mname, results[port][mname]) for mname in self.delay_meas_names)
|
|
debug.info(2,"Successful period {0}, Port {2}, {1}".format(self.period,
|
|
delay_str,
|
|
port))
|
|
return True
|
|
|
|
def set_probe(self,probe_address, probe_data):
|
|
""" Probe address and data can be set separately to utilize other
|
|
functions in this characterizer besides analyze."""
|
|
self.probe_address = probe_address
|
|
self.probe_data = probe_data
|
|
|
|
self.prepare_netlist()
|
|
|
|
|
|
def prepare_netlist(self):
|
|
""" Prepare a trimmed netlist and regular netlist. """
|
|
|
|
# Set up to trim the netlist here if that is enabled
|
|
if OPTS.trim_netlist:
|
|
self.trim_sp_file = "{}reduced.sp".format(OPTS.openram_temp)
|
|
self.trimsp=trim_spice(self.sp_file, self.trim_sp_file)
|
|
self.trimsp.set_configuration(self.num_banks,
|
|
self.num_rows,
|
|
self.num_cols,
|
|
self.word_size)
|
|
self.trimsp.trim(self.probe_address,self.probe_data)
|
|
else:
|
|
# The non-reduced netlist file when it is disabled
|
|
self.trim_sp_file = "{}sram.sp".format(OPTS.openram_temp)
|
|
|
|
# The non-reduced netlist file for power simulation
|
|
self.sim_sp_file = "{}sram.sp".format(OPTS.openram_temp)
|
|
# Make a copy in temp for debugging
|
|
shutil.copy(self.sp_file, self.sim_sp_file)
|
|
|
|
|
|
|
|
def analyze(self,probe_address, probe_data, slews, loads):
|
|
"""
|
|
Main function to characterize an SRAM for a table. Computes both delay and power characterization.
|
|
"""
|
|
#Dict to hold all characterization values
|
|
char_sram_data = {}
|
|
|
|
self.set_probe(probe_address, probe_data)
|
|
|
|
self.load=max(loads)
|
|
self.slew=max(slews)
|
|
# This is for debugging a full simulation
|
|
# debug.info(0,"Debug simulation running...")
|
|
# target_period=50.0
|
|
# feasible_delay_lh=0.059083183
|
|
# feasible_delay_hl=0.17953789
|
|
# load=1.6728
|
|
# slew=0.04
|
|
# self.try_period(target_period, feasible_delay_lh, feasible_delay_hl)
|
|
# sys.exit(1)
|
|
|
|
#For debugging, skips characterization and returns dummy values.
|
|
# char_data = self.get_empty_measure_data_dict()
|
|
# i = 1.0
|
|
# for slew in slews:
|
|
# for load in loads:
|
|
# for k,v in char_data.items():
|
|
# char_data[k].append(i)
|
|
# i+=1.0
|
|
# char_data["min_period"] = i
|
|
# char_data["leakage_power"] = i+1.0
|
|
# return char_data
|
|
|
|
# 1) Find a feasible period and it's corresponding delays using the trimmed array.
|
|
feasible_delays = self.find_feasible_period()
|
|
|
|
# 2) Finds the minimum period without degrading the delays by X%
|
|
self.set_load_slew(max(loads),max(slews))
|
|
min_period = self.find_min_period(feasible_delays)
|
|
debug.check(type(min_period)==float,"Couldn't find minimum period.")
|
|
debug.info(1, "Min Period Found: {0}ns".format(min_period))
|
|
char_sram_data["min_period"] = round_time(min_period)
|
|
|
|
# 3) Find the leakage power of the trimmmed and UNtrimmed arrays.
|
|
(full_array_leakage, trim_array_leakage)=self.run_power_simulation()
|
|
char_sram_data["leakage_power"]=full_array_leakage
|
|
leakage_offset = full_array_leakage - trim_array_leakage
|
|
|
|
# 4) At the minimum period, measure the delay, slew and power for all slew/load pairs.
|
|
char_port_data = self.simulate_loads_and_slews(slews, loads, leakage_offset)
|
|
|
|
return (char_sram_data, char_port_data)
|
|
|
|
def simulate_loads_and_slews(self, slews, loads, leakage_offset):
|
|
"""Simulate all specified output loads and input slews pairs of all ports"""
|
|
measure_data = self.get_empty_measure_data_dict()
|
|
#Set the target simulation ports to all available ports. This make sims slower but failed sims exit anyways.
|
|
self.targ_read_ports = self.read_ports
|
|
self.targ_write_ports = self.write_ports
|
|
for slew in slews:
|
|
for load in loads:
|
|
self.set_load_slew(load,slew)
|
|
# Find the delay, dynamic power, and leakage power of the trimmed array.
|
|
(success, delay_results) = self.run_delay_simulation()
|
|
debug.check(success,"Couldn't run a simulation. slew={0} load={1}\n".format(self.slew,self.load))
|
|
debug.info(1, "Successful simulation on all ports. slew={0} load={1}".format(self.slew,self.load))
|
|
#The results has a dict for every port but dicts can be empty (e.g. ports were not targeted).
|
|
for port in range(self.total_port_num):
|
|
for mname,value in delay_results[port].items():
|
|
if "power" in mname:
|
|
# Subtract partial array leakage and add full array leakage for the power measures
|
|
measure_data[port][mname].append(value + leakage_offset)
|
|
else:
|
|
measure_data[port][mname].append(value)
|
|
return measure_data
|
|
|
|
def add_data(self, data, port):
|
|
""" Add the array of data values """
|
|
debug.check(len(data)==self.word_size, "Invalid data word size.")
|
|
debug.check(port < len(self.data_values), "Port number cannot index data values.")
|
|
index = 0
|
|
for c in data:
|
|
if c=="0":
|
|
self.data_values[port][index].append(0)
|
|
elif c=="1":
|
|
self.data_values[port][index].append(1)
|
|
else:
|
|
debug.error("Non-binary data string",1)
|
|
index += 1
|
|
|
|
def add_address(self, address, port):
|
|
""" Add the array of address values """
|
|
debug.check(len(address)==self.addr_size, "Invalid address size.")
|
|
index = 0
|
|
for c in address:
|
|
if c=="0":
|
|
self.addr_values[port][index].append(0)
|
|
elif c=="1":
|
|
self.addr_values[port][index].append(1)
|
|
else:
|
|
debug.error("Non-binary address string",1)
|
|
index += 1
|
|
|
|
def add_noop_one_port(self, address, data, port):
|
|
""" Add the control values for a noop to a single port. """
|
|
#This is to be used as a helper function for the other add functions. Cycle and comments are omitted.
|
|
self.add_control_one_port(port, "noop")
|
|
if port in self.write_ports:
|
|
self.add_data(data,port)
|
|
self.add_address(address, port)
|
|
|
|
def add_noop_all_ports(self, comment, address, data):
|
|
""" Add the control values for a noop to all ports. """
|
|
self.add_comment("All", comment)
|
|
self.cycle_times.append(self.t_current)
|
|
self.t_current += self.period
|
|
|
|
for port in range(self.total_port_num):
|
|
self.add_noop_one_port(address, data, port)
|
|
|
|
|
|
def add_read(self, comment, address, data, port):
|
|
""" Add the control values for a read cycle. """
|
|
debug.check(port in self.read_ports, "Cannot add read cycle to a write port.")
|
|
self.add_comment(port, comment)
|
|
self.cycle_times.append(self.t_current)
|
|
self.t_current += self.period
|
|
self.add_control_one_port(port, "read")
|
|
|
|
#If the port is also a readwrite then add data.
|
|
if port in self.write_ports:
|
|
self.add_data(data,port)
|
|
self.add_address(address, port)
|
|
|
|
#This value is hard coded here. Possibly change to member variable or set in add_noop_one_port
|
|
noop_data = "0"*self.word_size
|
|
#Add noops to all other ports.
|
|
for unselected_port in range(self.total_port_num):
|
|
if unselected_port != port:
|
|
self.add_noop_one_port(address, noop_data, unselected_port)
|
|
|
|
def add_write(self, comment, address, data, port):
|
|
""" Add the control values for a write cycle. """
|
|
debug.check(port in self.write_ports, "Cannot add read cycle to a read port.")
|
|
self.add_comment(port, comment)
|
|
self.cycle_times.append(self.t_current)
|
|
self.t_current += self.period
|
|
|
|
self.add_control_one_port(port, "write")
|
|
self.add_data(data,port)
|
|
self.add_address(address,port)
|
|
|
|
#This value is hard coded here. Possibly change to member variable or set in add_noop_one_port
|
|
noop_data = "0"*self.word_size
|
|
#Add noops to all other ports.
|
|
for unselected_port in range(self.total_port_num):
|
|
if unselected_port != port:
|
|
self.add_noop_one_port(address, noop_data, unselected_port)
|
|
|
|
def add_control_one_port(self, port, op):
|
|
"""Appends control signals for operation to a given port"""
|
|
#Determine values to write to port
|
|
web_val = 1
|
|
csb_val = 1
|
|
if op == "read":
|
|
csb_val = 0
|
|
elif op == "write":
|
|
csb_val = 0
|
|
web_val = 0
|
|
elif op != "noop":
|
|
debug.error("Could not add control signals for port {0}. Command {1} not recognized".format(port,op),1)
|
|
|
|
#Append the values depending on the type of port
|
|
self.csb_values[port].append(csb_val)
|
|
#If port is in both lists, add rw control signal. Condition indicates its a RW port.
|
|
if port < len(self.web_values):
|
|
self.web_values[port].append(web_val)
|
|
|
|
def add_comment(self, port, comment):
|
|
"""Add comment to list to be printed in stimulus file"""
|
|
#Clean up time before appending. Make spacing dynamic as well.
|
|
time = "{0:.2f} ns:".format(self.t_current)
|
|
time_spacing = len(time)+6
|
|
self.cycle_comments.append("Cycle {0:<6d} Port {1:<6} {2:<{3}}: {4}".format(len(self.cycle_times),
|
|
port,
|
|
time,
|
|
time_spacing,
|
|
comment))
|
|
def gen_test_cycles_one_port(self, read_port, write_port):
|
|
"""Intended but not implemented: Returns a list of key time-points [ns] of the waveform (each rising edge)
|
|
of the cycles to do a timing evaluation of a single port. Current: Values overwritten for multiple calls"""
|
|
|
|
# Create the inverse address for a scratch address
|
|
inverse_address = ""
|
|
for c in self.probe_address:
|
|
if c=="0":
|
|
inverse_address += "1"
|
|
elif c=="1":
|
|
inverse_address += "0"
|
|
else:
|
|
debug.error("Non-binary address string",1)
|
|
|
|
# For now, ignore data patterns and write ones or zeros
|
|
data_ones = "1"*self.word_size
|
|
data_zeros = "0"*self.word_size
|
|
|
|
if self.t_current == 0:
|
|
self.add_noop_all_ports("Idle cycle (no positive clock edge)",
|
|
inverse_address, data_zeros)
|
|
|
|
self.add_write("W data 1 address 0..00",
|
|
inverse_address,data_ones,write_port)
|
|
|
|
self.add_write("W data 0 address 11..11 to write value",
|
|
self.probe_address,data_zeros,write_port)
|
|
self.measure_cycles["write0_{0}".format(write_port)] = len(self.cycle_times)-1
|
|
#self.write0_cycle=len(self.cycle_times)-1 # Remember for power measure
|
|
|
|
# This also ensures we will have a H->L transition on the next read
|
|
self.add_read("R data 1 address 00..00 to set DOUT caps",
|
|
inverse_address,data_zeros,read_port)
|
|
|
|
self.add_read("R data 0 address 11..11 to check W0 worked",
|
|
self.probe_address,data_zeros,read_port)
|
|
self.measure_cycles["read0_{0}".format(read_port)] = len(self.cycle_times)-1
|
|
#self.read0_cycle=len(self.cycle_times)-1 # Remember for power measure
|
|
|
|
self.add_noop_all_ports("Idle cycle (if read takes >1 cycle)",
|
|
inverse_address,data_zeros)
|
|
#Does not seem like is is used anywhere commenting out for now.
|
|
#self.idle_cycle=len(self.cycle_times)-1 # Remember for power measure
|
|
|
|
self.add_write("W data 1 address 11..11 to write value",
|
|
self.probe_address,data_ones,write_port)
|
|
self.measure_cycles["write1_{0}".format(write_port)] = len(self.cycle_times)-1
|
|
#self.write1_cycle=len(self.cycle_times)-1 # Remember for power measure
|
|
|
|
self.add_write("W data 0 address 00..00 to clear DIN caps",
|
|
inverse_address,data_zeros,write_port)
|
|
|
|
# This also ensures we will have a L->H transition on the next read
|
|
self.add_read("R data 0 address 00..00 to clear DOUT caps",
|
|
inverse_address,data_zeros,read_port)
|
|
|
|
self.add_read("R data 1 address 11..11 to check W1 worked",
|
|
self.probe_address,data_zeros,read_port)
|
|
self.measure_cycles["read1_{0}".format(read_port)] = len(self.cycle_times)-1
|
|
#self.read1_cycle=len(self.cycle_times)-1 # Remember for power measure
|
|
|
|
self.add_noop_all_ports("Idle cycle (if read takes >1 cycle))",
|
|
self.probe_address,data_zeros)
|
|
|
|
def get_available_port(self,get_read_port):
|
|
"""Returns the first accessible read or write port. """
|
|
if get_read_port and len(self.read_ports) > 0:
|
|
return self.read_ports[0]
|
|
elif not get_read_port and len(self.write_ports) > 0:
|
|
return self.write_ports[0]
|
|
return None
|
|
|
|
def create_test_cycles(self):
|
|
"""Returns a list of key time-points [ns] of the waveform (each rising edge)
|
|
of the cycles to do a timing evaluation. The last time is the end of the simulation
|
|
and does not need a rising edge."""
|
|
#Using this requires setting at least one port to target for simulation.
|
|
if len(self.targ_write_ports) == 0 and len(self.targ_read_ports) == 0:
|
|
debug.error("No ports selected for characterization.",1)
|
|
|
|
# Start at time 0
|
|
self.t_current = 0
|
|
|
|
# Cycle times (positive edge) with comment
|
|
self.cycle_comments = []
|
|
self.cycle_times = []
|
|
self.measure_cycles = {}
|
|
|
|
# Control signals for ports. These are not the final signals and will likely be changed later.
|
|
#write enable bar for readwrite ports to control read or write
|
|
self.web_values = [[] for i in range(self.readwrite_port_num)]
|
|
#csb represents a basic "enable" signal that all ports have.
|
|
self.csb_values = [[] for i in range(self.total_port_num)]
|
|
|
|
# Address and data values for each address/data bit. A dict of 3d lists of size #ports x bits x cycles.
|
|
self.data_values=[[[] for i in range(self.addr_size)]]*len(self.write_ports)
|
|
self.addr_values=[[[] for i in range(self.addr_size)]]*self.total_port_num
|
|
|
|
#Get any available read/write port in case only a single write or read ports is being characterized.
|
|
cur_read_port = self.get_available_port(get_read_port=True)
|
|
cur_write_port = self.get_available_port(get_read_port=False)
|
|
|
|
#These checks should be superceded by check_arguments which should have been called earlier, so this is a double check.
|
|
debug.check(cur_read_port != None, "Characterizer requires at least 1 read port")
|
|
debug.check(cur_write_port != None, "Characterizer requires at least 1 write port")
|
|
|
|
#Characterizing the remaining target ports. Not the final design.
|
|
write_pos = 0
|
|
read_pos = 0
|
|
while True:
|
|
#Exit when all ports have been characterized
|
|
if write_pos >= len(self.targ_write_ports) and read_pos >= len(self.targ_read_ports):
|
|
break
|
|
|
|
#Select new write and/or read ports for the next cycle. Use previous port if none remaining.
|
|
if write_pos < len(self.targ_write_ports):
|
|
cur_write_port = self.targ_write_ports[write_pos]
|
|
write_pos+=1
|
|
if read_pos < len(self.targ_read_ports):
|
|
cur_read_port = self.targ_read_ports[read_pos]
|
|
read_pos+=1
|
|
|
|
#Add test cycle of read/write port pair. One port could have been used already, but the other has not.
|
|
self.gen_test_cycles_one_port(cur_read_port, cur_write_port)
|
|
|
|
def analytical_delay(self,sram, slews, loads):
|
|
""" Return the analytical model results for the SRAM.
|
|
"""
|
|
debug.check(OPTS.num_rw_ports < 2 and OPTS.num_w_ports < 1 and OPTS.num_r_ports < 1 ,
|
|
"Analytical characterization does not currently support multiport.")
|
|
|
|
delay_lh = []
|
|
delay_hl = []
|
|
slew_lh = []
|
|
slew_hl = []
|
|
for slew in slews:
|
|
for load in loads:
|
|
self.set_load_slew(load,slew)
|
|
bank_delay = sram.analytical_delay(self.slew,self.load)
|
|
# Convert from ps to ns
|
|
delay_lh.append(bank_delay.delay/1e3)
|
|
delay_hl.append(bank_delay.delay/1e3)
|
|
slew_lh.append(bank_delay.slew/1e3)
|
|
slew_hl.append(bank_delay.slew/1e3)
|
|
|
|
power = sram.analytical_power(self.process, self.vdd_voltage, self.temperature, load)
|
|
#convert from nW to mW
|
|
power.dynamic /= 1e6
|
|
power.leakage /= 1e6
|
|
debug.info(1,"Dynamic Power: {0} mW".format(power.dynamic))
|
|
debug.info(1,"Leakage Power: {0} mW".format(power.leakage))
|
|
|
|
sram_data = { "min_period": 0,
|
|
"leakage_power": power.leakage}
|
|
port_data = [{"delay_lh": delay_lh,
|
|
"delay_hl": delay_hl,
|
|
"slew_lh": slew_lh,
|
|
"slew_hl": slew_hl,
|
|
"read0_power": power.dynamic,
|
|
"read1_power": power.dynamic,
|
|
"write0_power": power.dynamic,
|
|
"write1_power": power.dynamic,
|
|
}]
|
|
return (sram_data,port_data)
|
|
|
|
def gen_data(self):
|
|
""" Generates the PWL data inputs for a simulation timing test. """
|
|
for write_port in self.write_ports:
|
|
for i in range(self.word_size):
|
|
sig_name="{0}{1}_{2} ".format(self.din_name,write_port, i)
|
|
self.stim.gen_pwl(sig_name, self.cycle_times, self.data_values[write_port][i], self.period, self.slew, 0.05)
|
|
|
|
def gen_addr(self):
|
|
"""
|
|
Generates the address inputs for a simulation timing test.
|
|
This alternates between all 1's and all 0's for the address.
|
|
"""
|
|
for port in range(self.total_port_num):
|
|
for i in range(self.addr_size):
|
|
sig_name = "{0}{1}_{2}".format(self.addr_name,port,i)
|
|
self.stim.gen_pwl(sig_name, self.cycle_times, self.addr_values[port][i], self.period, self.slew, 0.05)
|
|
|
|
def gen_control(self):
|
|
""" Generates the control signals """
|
|
for port in range(self.total_port_num):
|
|
self.stim.gen_pwl("CSB{0}".format(port), self.cycle_times, self.csb_values[port], self.period, self.slew, 0.05)
|
|
|
|
for readwrite_port in range(self.readwrite_port_num):
|
|
self.stim.gen_pwl("WEB{0}".format(readwrite_port), self.cycle_times, self.web_values[readwrite_port], self.period, self.slew, 0.05)
|
|
|
|
def get_empty_measure_data_dict(self):
|
|
"""Make a dict of lists for each type of delay and power measurement to append results to"""
|
|
measure_names = self.delay_meas_names + self.power_meas_names
|
|
#Create list of dicts. List lengths is # of ports. Each dict maps the measurement names to lists.
|
|
measure_data = [{mname:[] for mname in measure_names} for i in range(self.total_port_num)]
|
|
return measure_data |