mirror of https://github.com/VLSIDA/OpenRAM.git
32 lines
1.1 KiB
Plaintext
32 lines
1.1 KiB
Plaintext
|
|
Use signal names from the technology file. Right now they are hard
|
|
coded everywhere. For example: DATA, ADDR, etc.
|
|
|
|
Cell name (ms_flop) is hard coded in characterizer, pin names are hard
|
|
coded too. This should come from the config file which dynamically
|
|
loads the module names.
|
|
|
|
Autodetect ideal number of threads for hspice.
|
|
|
|
vdd and gnd are hard coded in some places. The names should come from
|
|
the tech file.
|
|
|
|
Some modules use upper/lower via layer instead of min width DRC rule
|
|
from tech file.
|
|
|
|
Fix the size of the labels in freepdk45. They are ok in scn3me_subm though.
|
|
|
|
Add the clock buffer internal to control logic. Simulation uses
|
|
1-4-8-16 inverters right now. Replace simulation with simple clock
|
|
buffer after fixing.
|
|
|
|
Check out the multibank organization in sram.py and bank.py to see if
|
|
it can be reduced or made more readable.
|
|
|
|
Move/modify similar functions in hierarchical_predecode2x4 and
|
|
hierarchical_predecode3x8 to hierarchical_predecode class
|
|
|
|
Fix stimuli.py to be more readable.
|
|
|
|
Change the delay measurement to be from the negative clock edge to
|
|
remove the dependency on the clock period. |