luke/OpenRAM
1
0
Fork 0
mirror of https://github.com/VLSIDA/OpenRAM.git synced 2026-08-30 01:48:33 +02:00
Code Issues Packages Projects Releases Wiki Activity

Update documentation for library

Browse Source
This commit is contained in:
Eren Dogan
2022-11-11 16:16:38 -08:00
parent e821b4a75e
commit be7c21ab64
14 changed files with 187 additions and 131 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/source/FAQ.md
+14 -14
View File
@@ -13,25 +13,25 @@ This is where simulations and DRC/LVS get run so there is no network
traffic. The directory name is unique for each person and run of
OpenRAM to not clobber any files and allow simultaneous runs. If it
passes, the files are deleted. If it fails, you will see these files:
+ temp.gds is the layout (.mag files too if using SCMOS)
+ temp.sp is the netlist
+ test1.drc.err is the std err output of the DRC command
+ test1.drc.out is the standard output of the DRC command
+ test1.drc.results is the DRC results file
+ test1.lvs.err is the std err output of the LVS command
+ test1.lvs.out is the standard output of the LVS command
+ test1.lvs.results is the DRC results file
+ `temp.gds` is the layout (.mag files too if using SCMOS)
+ `temp.sp` is the netlist
+ `test1.drc.err` is the std err output of the DRC command
+ `test1.drc.out` is the standard output of the DRC command
+ `test1.drc.results` is the DRC results file
+ `test1.lvs.err` is the std err output of the LVS command
+ `test1.lvs.out` is the standard output of the LVS command
+ `test1.lvs.results` is the DRC results file
Depending on your DRC/LVS tools, there will also be:
+ run_drc.sh is a script to run DRC
+ run_ext.sh is a script to run extraction
+ run_lvs.sh is a script to run LVS
+ `run\_drc.sh` is a script to run DRC
+ `run\_ext.sh` is a script to run extraction
+ `run\_lvs.sh` is a script to run LVS
If DRC/LVS fails, the first thing is to check if it ran in the .out and
.err file. This shows the standard output and error output from
If DRC/LVS fails, the first thing is to check if it ran in the `.out` and
`.err` file. This shows the standard output and error output from
running DRC/LVS. If there is a setup problem it will be shown here.
If DRC/LVS runs, but doesn't pass, you then should look at the .results
If DRC/LVS runs, but doesn't pass, you then should look at the `.results`
file. If the DRC fails, it will typically show you the command that was used
to run Calibre or Magic+Netgen.