#### xschemrc system configuration file

#### values may be overridden by user's ~/.xschem/xschemrc configuration file
#### or by project-local ./xschemrc

###########################################################################
#### XSCHEM INSTALLATION DIRECTORY: XSCHEM_SHAREDIR
###########################################################################
#### Normally there is no reason to set this variable if using standard
#### installation. Location of files is set at compile time but may be overridden
#### with following line:
# set XSCHEM_SHAREDIR $env(HOME)/share/xschem

###########################################################################
#### XSCHEM SYSTEM-WIDE DESIGN LIBRARY PATHS: XSCHEM_LIBRARY_PATH
###########################################################################
#### If unset xschem starts with XSCHEM_LIBRARY_PATH set to the default, typically:
#### <install_root>/.xschem/xschem_library
#### <install_root>/share/xschem/xschem_library/devices
#### <install_root>/share/doc/xschem/examples
#### <install_root>/share/doc/xschem/ngspice
#### <install_root>/share/doc/xschem/logic
#### <install_root>/share/doc/xschem/xschem_simulator
#### <install_root>/share/doc/xschem/generators
#### <install_root>/share/doc/xschem/inst_sch_select
#### <install_root>/share/doc/xschem/binto7seg
#### <install_root>/share/doc/xschem/pcb
#### <install_root>/share/doc/xschem/rom8k

#### For testing in build src directory
#### if unset following paths are set and maintained if existing:
#### ~/.xschem/xschem_library
#### ../xschem_library/devices
#### ../xschem_library/examples
#### ../xschem_library/ngspice
#### ../xschem_library/logic
#### ../xschem_library/xschem_simulator
#### ../xschem_library/generators
#### ../xschem_library/inst_sch_select
#### ../xschem_library/binto7seg
#### ../xschem_library/pcb
#### ../xschem_library/rom8k

#### For testing after installation: uncomment following lines
# set xschem_doc_dir [file dirname ${XSCHEM_SHAREDIR}]/doc/xschem
# set XSCHEM_LIBRARY_PATH {}
# append XSCHEM_LIBRARY_PATH :~/.xschem/xschem_library
# append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/xschem_library/devices
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/examples
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/ngspice
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/logic
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/xschem_simulator
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/generators
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/inst_sch_select
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/binto7seg
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/pcb
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/rom8k
#### Optional, often not needed...
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/symgen
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/xTAG
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/rulz-r8c33
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/gschem_import
# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/gschem_import/sym

#### For Windows, use ; instead of :, and enclosed pathname with ""
# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/xschem_library"
# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/xschem_library/devices"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/examples"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/ngspice"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/logic"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/xschem_simulator"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/generators"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/inst_sch_select"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/binto7seg"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/pcb"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/rom8k"
#### Optional, often not needed...
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/symgen"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/xTAG"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/rulz-r8c33"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/gschem_import"
# append XSCHEM_LIBRARY_PATH ";${xschem_doc_dir}/gschem_import/sym"

###########################################################################
#### SET CUSTOM COLORS FOR XSCHEM LIBRARIES MATCHING CERTAIN PATTERNS
###########################################################################
#### each line contains a dircolor(pattern) followed by a color
#### color can be an ordinary name (grey, brown, blue) or a hex code {#77aaff}
#### hex code must be enclosed in braces
#### these are the defaults:
# set dircolor(/share/xschem/) red
# set dircolor(/share/doc/xschem/) {#338844}

###########################################################################
#### WINDOW TO OPEN ON STARTUP: XSCHEM_START_WINDOW
###########################################################################
#### Start without a design if no filename given on command line:
#### To avoid absolute paths, use a path that is relative to one of the
#### XSCHEM_LIBRARY_PATH directories. Default: empty
# set XSCHEM_START_WINDOW {0_examples_top.sch}

###########################################################################
#### DIRECTORY WHERE SIMULATIONS, NETLIST AND SIMULATOR OUTPUTS ARE PLACED
###########################################################################
#### If unset $USER_CONF_DIR/simulations is assumed (normally ~/.xschem/simulations) 
# set netlist_dir $env(HOME)/.xschem/simulations

#### if this is set to '1' netlists and simulations will go into a simulation/ folder
#### inside the directory containing the top level schematic.
#### if this is set to '2' netlists and simulations will go into a simulation/[schname]/ folder
#### inside the directory containing the top level schematic.
#### Default: not set (0).
# set local_netlist_dir 1

###########################################################################
#### NETLIST AND HIERARCHICAL PRINT EXCLUDE PATTERNS
###########################################################################
#### xschem_libs is a list of patterns of cells to exclude from netlisting.
#### Matching is done as regular expression on full cell path
#### Example:
#### set xschem_libs { {/cmoslib/} {/analoglib/.*pass} buffer }
#### in this case all schematic cells of directory cmoslib and cells containing
#### /analoglib/...pass and buffer will be excluded from netlisting
#### default value: empty
# set xschem_libs {}
#### noprint_libs is a list with same rules as for xschem_libs. This
#### variable controls hierarchical print
#### default value: empty
# set noprint_libs {}
#### nolist_libs is a list with same rules as for xschem_libs. This
#### variable controls cell listing in procedure list_hierarchy.
#### default value: empty
# set nolist_libs {}


###########################################################################
#### CHANGE DEFAULT [] WITH SOME OTHER CHARACTERS FOR BUSSED SIGNALS 
#### IN SPICE NETLISTS (EXAMPLE: DATA[7] --> DATA<7>) 
###########################################################################
#### default: empty (use xschem default, [ ])
# set bus_replacement_char {<>}
#### for XSPICE: replace square brackets as the are used for XSPICE vector nodes.
# set bus_replacement_char {__} 

###########################################################################
#### SOME DEFAULT BEHAVIOR
###########################################################################
#### Allowed values:  spice, verilog, vhdl, tedax, default: spice
# set netlist_type spice

#### Some netlisting options (these are the defaults)
# set verilog_2001 1

#### to use a fixed line with set change_lw to 0 and set some value to line_width
#### these are the defaults
# set line_width 0
# set change_lw 1

#### allow color postscript and svg exports. Default: 1, enable color
# set color_ps 1

#### add a page title in the top left corner of the ps/pdf page. Default: enabled (1)
# set ps_page_title 1

#### set paper size: name, height, width. Sizes in 1/72 of an inch (typographical points)
#### default: {a4 842 595}
# set ps_paper_size {a4 842 595}
# set ps_paper_size {letter 792 612}

#### initial size of xschem window you can specify also position with (wxh+x+y)
#### this is the default:
# set initial_geometry {900x600}

#### initial size of the load_file_dialog (the file selector) dialog box
# set file_dialog_default_geometry 700x680+100+40
#### load_file_dialog directory list (+ recent if shown) X width in pixels
# set file_dialog_sp0 350
#### load_file_dialog recent components list X width in pixels
# set file_dialog_sp1 100
#### load_file_dialog components list Y height in pixels
# set file_dialog_v_sp0 420

#### display full path (1) or only name (0) for component directories. Default: 1
# set load_file_dialog_fullpath 1

#### if set to 0, when zooming out allow the viewport do drift toward the mouse position,
#### allowing to move away by zooming / unzooming with mouse wheel
#### default setting: 0
# set unzoom_nodrift 0

#### if set to 1 full zoom will center the drawing instead of anhoring to lower
#### left corner. Default: 0
# set zoom_full_center 1

#### if set to 1 allow to place multiple components with same name.
#### Warning: this is normally not allowed in any simulation netlist.
#### default: 0, do not allow place multiple elements with same name (refdes)
# set disable_unique_names 0

#### if set to 1 continue drawing lines / wires after click
#### default: 0
# set persistent_command 1

#### if set to 0 users must click a point after hitting a command key
#### like 'w(ire)', 'l(ine)' and so on.
#### default is 1 (hitting the command key sets also the first point).
# set infix_interface 0

#### if set to 1 allow click & drag objects in the schematic 
#### to move them without keyboard commands ('m')
#### default: enabled (1)
# set intuitive_interface 0


#### if set to 1 at end of a move operation that stretches wires attached to
#### moved objects these wires will be unselected.
#### default: not enabled (0)
# set unselect_partial_sel_wires 0

#### if set select objects if touched by selection rectangle while dragging to the left
#### Default: enabled (1)
# set select_touch 0

#### if set show selected elements while dragging the selection rectangle.
#### once selected these can not be unselected by retracting the selection rectangle
#### if not set show selected items at end of drag. Default: enabled (1)
# set incremental_select 0

#### wires are drawn in free-form mode with this mode disabled (default).
#### if set to 1, wires drawn on the schematic will strictly follow
#### orthogonal routes to connect two distinct points together.
#### default: 0
# set orthogonal_wiring 1

#### if set to 1 automatically join/trim wires while editing
#### this may slow down on rally big designs. Can be disabled via menu 
#### default: 0
# set autotrim_wires 0

#### do not ask to save file when doing control-s or File -> Save
#### default: disabled (0), will ask before saving.
# set no_ask_save 0

#### set widget scaling (mainly for font display), this is useful on 4K displays
#### default: unset (tk uses its default) > 1.0 ==> bigger 
# set tk_scaling 1.7

#### use the tclreadline package if available , Default: 1 (enabled).
# set use_tclreadline 1

#### use the dark color scheme (default: 1)
# set dark_colorscheme 1

#### use the dark color scheme for GUI widgets (default: 0)
#### *** This can not be changed after xschem startup ***
# set dark_gui_colorscheme 0

#### disable some symbol layers. Default: none, all layers are visible.
# set enable_layer(5) 0 ;# example to disable pin red boxes

#### enable drawing the grid. Default: enabled (1)
# set draw_grid 1

#### auto highlight nodes shown in graphs: default: not enabled (0)
# set auto_hilight_graph_nodes 0

#### enable stretch mode: when dragging a selection rectangle that cuts wires these are stretched
#### to follow the selected objects when moved. Default: not enabled (0).
#### This can be normally done by dragging with the Control key pressed.
#### Enabling this option swaps the two drag modes.
# set enable_stretch 0

#### enable drawing crosshairs at mouse coordinates. Default: disabled (0)
# set draw_crosshair 1

#### set crosshair layer; Default 8 (Yellow)
# set crosshair_layer 8

#### set crosshair size; Default: 0 (full screen spanning crosshair) 
# set crosshair_size 2

#### enable drawing a diamond-shaped cursor at the closest circuit endpoint. Default: disabled (0)
# set snap_cursor 1

#### set snap_cursor_size; Default: 6 (Diamond-shaped cursor that snaps to nearest circuit endpoint)
# set snap_cursor_size 6

#### set cadence_compat; Default: 0 (Cadence-style keybinds are not used by default)
# set cadence_compat 1

#### if set, then, when cursor (regardless of style) is on an object, and user clicks (though mouse pointer is not on the object),
#### the object is selected. Default: 0
# set use_cursor_for_selection 1

#### enable to scale grid point size as done with lines at close zoom, default: 0
# set big_grid_points 0

#### explicitly set grid point size in pixels. Default: -1 (not set)
# set grid_point_size 2

#### enable drawing grid axes. Default: enabled (1)
# set draw_grid_axes 1

#### enable grouping contiguous bits of bus slices in net->pin instance
#### assignments for verilog netlists. Default: disabled (0)
# set verilog_bitblast 0

#### allow searching the full search path for schematics associated to symbols
#### instead of looking only in symbol directory. Default: disabled (0).
# set search_schematic 0

#### keep symbols encountered while netlisting / descending the hierarchy.
#### Default: not enabled (0)
# set keep_symbols 0

#### focus the schematic window if mouse goes over it, even if a dialog box
#### is displayed, without needing to click.
#### This allows to move/zoom/pan the schematic while editing attributes.
#### Clicking in the schematic window usually closes the dialog box or starts
#### editing a new component if clicking on a new component.
#### default: enabled (1)
# set autofocus_mainwindow 0

#### replace selected text in text widgets when pasting from clipboard
#### default: enabled (1)
# set text_replace_selection 0

#### set component browser always above drawing canvas.
#### default: enabled (1)
# set component_browser_on_top 0

#### set graph line width multiplier with respect to xschem actual line width
#### default: 2.0
# set graph_linewidth_mult 4.0

###########################################################################
#### EXPORT FORMAT TRANSLATORS, PNG AND PDF
###########################################################################
#### command to translate xpm to png; (assumes command takes source 
#### and dest file as arguments, example: gm convert plot.xpm plot.png)
#### default: {gm convert}
#### Windows ghostscript uses gswin64c
# set to_png {gswin64c -sDEVICE=png16m -o}
# set to_png {gm convert}

#### command to translate ps to pdf; (assumes command takes source
#### and dest file as arguments, example: ps2pdf plot.ps plot.pdf)
#### default: ps2pdf
#### Windows ghostscript uses gswin64c
# set to_pdf {gswin64c -sDEVICE=pdfwrite -o}
# set to_pdf ps2pdf
# set to_pdf {ps2pdf -dAutoRotatePages=/None}

###########################################################################
#### IMPORT SVG IMAGES
###########################################################################
#### this is a filter command that processes svg files and writes png data
#### listed in my personal order of preference.
#### filter must read stdin and write to stdout.
# set svg_to_png {rsvg-convert}
# set svg_to_png {inkscape --pipe --export-type=png --export-filename=-}
# set svg_to_png {convert - png:-}

###########################################################################
#### UNDO: SAVE ON DISK OR KEEP IN MEMORY
###########################################################################
#### Alloved: 'disk'or 'memory'. 
#### Saving undo on disk is safer but slower on extremely big schematics.
#### In most cases you won't notice any delay. Undo on disk allows previous
#### state recovery in case of crashes. In-memory undo is extremely fast
#### but should a crash occur everything is lost.
#### It is highly recommended to keep undo on disk.
#### Default: disk
# set undo_type disk

###########################################################################
#### CUSTOM GRID / SNAP VALUE SETTINGS
###########################################################################
#### Warning: changing these values will likely break compatibility
#### with existing symbol libraries. Defaults: grid 20, snap 10.
# set cadgrid 20
# set cadsnap 10

###########################################################################
#### CUSTOM COLORS  MAY BE DEFINED HERE
###########################################################################
#  set cadlayers 22
#  set light_colors {
#   "#ffffff" "#0044ee" "#aaaaaa" "#222222" "#229900"
#   "#bb2200" "#00ccee" "#ff0000" "#888800" "#00aaaa"
#   "#880088" "#00ff00" "#0000cc" "#666600" "#557755"
#   "#aa2222" "#7ccc40" "#00ffcc" "#ce0097" "#d2d46b"
#   "#ef6158" "#fdb200" }

#  set dark_colors {
#   "#000000" "#00ccee" "#3f3f3f" "#cccccc" "#88dd00"
#   "#bb2200" "#00ccee" "#ff0000" "#ffff00" "#ffffff"
#   "#ff00ff" "#00ff00" "#0000cc" "#aaaa00" "#aaccaa"
#   "#ff7777" "#bfff81" "#00ffcc" "#ce0097" "#d2d46b"
#   "#ef6158" "#fdb200" }

###########################################################################
#### CUSTOM FILL PATTERNS  MAY BE DEFINED HERE
###########################################################################
#### every 0x#### hex data represents one 16 bit row of the 16x16 bit fill bitmap
#### of the specified layer number.
#### following examples set a checkerboard fill pattern
#### for symbol shape drawing layer (layer 4)
#### and for pin layer (layer 5)
#
# set pixdata(4) {
#   0x8888 0x0000 0x0000 0x0000 0x2222 0x0000 0x0000 0x0000
#   0x8888 0x0000 0x0000 0x0000 0x2222 0x0000 0x0000 0x0000
# }

# set pixdata(5) {
#   0x5555 0xaaaa 0x5555 0xaaaa 0x5555 0xaaaa 0x5555 0xaaaa
#   0x5555 0xaaaa 0x5555 0xaaaa 0x5555 0xaaaa 0x5555 0xaaaa
# }

###########################################################################
#### CAIRO STUFF
###########################################################################
#### Scale all fonts by this number
# set cairo_font_scale 1.0

#### default for following two is 0.85 (xscale) and 0.88 (yscale) to 
#### match cairo font spacing
# set nocairo_font_xscale 1.0
#### set nocairo_font_yscale 1.0

#### Scale line spacing by this number
# set cairo_font_line_spacing 1.0

#### Specify a font
# set cairo_font_name {Sans-Serif}
# set svg_font_name {Sans-Serif}

#### Lift up text by some zoom-corrected pixels for
#### better compatibility wrt no cairo version.
#### Useful values in the range [-1, 3]
# set cairo_vert_correct 0
# set nocairo_vert_correct 0

###########################################################################
#### KEYBINDINGS
###########################################################################
#### General format for specifying a replacement for a keybind
#### Replace Ctrl-q with Escape (so you wont kill the program)
# set replace_key(Control-q) Escape

#### swap w and W keybinds; Always specify Shift for capital letters
# set replace_key(Shift-W) Key-w
# set replace_key(Key-w) Shift-W

###########################################################################
#### TERMINAL
###########################################################################
#### default for linux: xterm
# set terminal {xterm -geometry 100x35 -fn 9x15 -bg black -fg white -cr white -ms white }
#### lxterminal is not OK since it will not inherit env vars: 
#### In order to reduce memory usage and increase the performance, all instances
#### of the lxterminal are sharing a single process. LXTerminal is part of LXDE

###########################################################################
#### EDITOR
###########################################################################
#### editor must not detach from launching shell (-f mandatory for gvim)
#### default for linux: gvim -f
# set editor {gvim -f -geometry 90x28}
# set editor { xterm -geometry 100x40 -e nano }
# set editor { xterm -geometry 100x40 -e pico }
# set editor {gedit -w}

#### For Windows
# set editor {notepad.exe}

###########################################################################
#### SHOW ERC INFO WINDOW (erc errors, warnings etc)
###########################################################################
#### default: 0 (can be enabled by menu)
# set show_infowindow 0

###########################################################################
#### SHOW ERC INFO WINDOW AFTER NETLIST
###########################################################################
#### allowed values: never onerror always
#### default: onerror
# set show_infowindow_after_netlist onerror

###########################################################################
#### TCP CONNECTION WITH GAW
###########################################################################
#### set gaw address for socket connection: {host port}
#### default: set to localhost, port 2020
# set gaw_tcp_address {localhost 2020}

###########################################################################
#### XSCHEM LISTEN TO TCP PORT
###########################################################################
#### set xschem listening port; default: not enabled
# set xschem_listen_port 2021

###########################################################################
#### BESPICE WAVE SOCKET CONNECTION
###########################################################################
#### set bespice wave listening port; default: not enabled
#### set port number to 0 so TCL will automatically and reliably find
#### a free port
# set bespice_listen_port 0

###########################################################################
#### TCL FILES TO LOAD AT STARTUP
###########################################################################
#### list of tcl files to preload.
# set tcl_files {}
# lappend tcl_files [list ${XSCHEM_SHAREDIR}/ngspice_backannotate.tcl]
# lappend tcl_files ${XSCHEM_SHAREDIR}/change_index.tcl
# lappend tcl_files ....

###########################################################################
#### TCL COMMANDS TO BE EXECUTED AFTER COMPLETING STARTUP
###########################################################################
#### some examples:
# set postinit_commands {puts [xschem get version]}
# set postinit_commands {
#   .menubar.netlist configure -command {xschem netlist -erc; edit_netlist [xschem get netlist_name fallback]}
#   .menubar.simulate configure -command {xschem netlist -erc; simulate_from_button}
# }
#
#
#### example: if a raw file already exists re-run a tran simulation.
#### and schedule a waveform load at the end.
# set postinit_commands {
#   set rawfile $netlist_dir/[file rootname [xschem get current_name]].raw
#   if {[file exists $rawfile]} {
#     xschem netlist
#     set sim(spice,default) 1 ;# ngspice control mode (no xterminal)
#     set sim(spice,1,st) 0 ;# no status report
#     set sim(spice,1,fg) 0 ;# background
#     simulate_from_button {
#        viewdata $execute(data,last)
#        xschem raw read $rawfile tran
#        xschem redraw
#     }
#   }
# }

###########################################################################
#### TCL COMMANDS TO BE EXECUTED AFTER GENERATING NETLIST
###########################################################################
# set netlist_postprocess {textfile $netlist_dir/[xschem get netlist_name fallback]}

###########################################################################
#### WEB URL DOWNLOAD HELPER APPLICATION
###########################################################################
#### used to download files from web: default: {curl -f -s -O -J}
# set download_url_helper {curl -f -s -O -J}
# set download_url_helper {wget -N --quiet --content-disposition}

###########################################################################
#### XSCHEM TOOLBAR
###########################################################################
#### default: enabled, horizontal
# set toolbar_visible 0
# set toolbar_horiz   1

###########################################################################
#### TABBED WINDOWS
###########################################################################
#### default: enabled. Interface can be changed runtime if only one window 
#### or tab is open.
# set tabbed_interface 0

###########################################################################
#### CASE INSENSITIVE SYMBOL LOOKUP
###########################################################################
#### this option might be useful on filesystems that are case insensitive and
#### on designs ported from windows where case of file names does not matter.
#### if this option is set symbol lookup will be case insensitive,
#### so a symbol reference 'AMPLI.SYM' will match with 'ampli.sym' or
#### Amply.sym on disk. File system must be case insensitive for this to work,
#### like FAT32 or NTFS.
#### Do not set this option if you don't know what you are doing.
#### Default: not enabled (0)
# set case_insensitive 1

###########################################################################
#### SHOW HIDDEN TEXTS
###########################################################################
#### This option shows text objects even if they have attribute 'hide=true' set
#### default: 0 (not set) 
# set show_hidden_texts 1

###########################################################################
#### USE CTRL MODIFIER TO OPERATE ON GRAPHS WITH MOUSE & KEYBOARD
###########################################################################
#### if enabled forces to hold Control key pressed to operate on graphs
#### to prevent "graph event stealing to schematic"
#### Default: 0 (not set)
# set graph_use_ctrl_key 1

###########################################################################
#### HIDE GRAPHS IF NO SPICE DATA LOADED
###########################################################################
#### if enabled graphs will be hidden if no data is loaded.
#### default: not enabled (0)
# set hide_empty_graphs 0


###########################################################################
#### ATTACH HOOK FUNCTION TO CURSOR 2 MOVEMENT 
###########################################################################
#### if enabled whenever the cursor2 is moved the specified script is
#### executed. Examples:
####  set cursor_2_hook {conducting_devices 10e-3 nodraw}
####  set cursor_2_hook {hilight_high_nets 0 1.8 nodraw}
#### this can be used to add backannotation actions.

###########################################################################
#### LIVE BACKANNOTATION OF DATA AT CURSOR 2 (B) POSITION
###########################################################################
#### if enabled will backannotate values in schematic at cursor 'b' position
#### in graph. Default: enabled (1)
# set live_cursor2_backannotate 1

###########################################################################
#### INCLUDE ALL WINDOWS DRIVES IN XSCHEM PATHS
###########################################################################
#### This option will not include all windows drives in xschem paths
#### Instead, additional drives can be added using XSCHEM_LIBRARY_PATH
#### default: 1
# set add_all_windows_drives 0

###########################################################################
#### FIX GRAPHIC PROBLEMS ON SOME DRIVERS/GPU CONFIGURATIONS
###########################################################################
#### if you see garbage on screen / graphic artifacts while editing with
#### xschem try to set this to 1. Default: not enabled (0)
# set fix_broken_tiled_fill 0

###########################################################################
#### FIX SOME REMOTE DESKTOP CONNECTION SOFTWARES NOT CORRECTLY REPORTING
#### MOUSE COORDINATES ON KEYPRESS / KEYRELEASE EVENTS
###########################################################################
#### If you see strange behavior while using keybindings to create graphic 
#### objects ('w', 'l', 't', 'r', ...) try to set this to 1.
#### Default: not enabled (0)
# set fix_mouse_coord 0

#### redefine some variables to emulate Cadence UI / bindkeys
# source /home/schippes/share/xschem/cadence_style_rc