diff --git a/doc/xschem_man/developer_info.html b/doc/xschem_man/developer_info.html
index 985ca342..d988da0f 100644
--- a/doc/xschem_man/developer_info.html
+++ b/doc/xschem_man/developer_info.html
@@ -557,7 +557,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
abort_operation
Resets UI state, unselect all and abort any pending operation
add_symbol_pin [x y name dir [draw]]
- place a symbol pin.
+ place a symbol pin.
x,y : pin coordinates
name = pin name
dir = in|out|inout
@@ -570,7 +570,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
align
Align currently selected objects to current snap setting
annotate_op [raw_file] [level]
- Annotate operating point data into current schematic.
+ Annotate operating point data into current schematic.
use <schematic name>.raw or use supplied argument as raw file to open
look for operating point data and annotate voltages/currents into schematic.
The optional 'level' integer specifies the hierarchy level the raw file refers to.
@@ -583,7 +583,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
Attach net labels to selected component(s) instance(s)
bbox begin|end
Start/end bounding box calculation: parameter is either 'begin' or 'end'
- break_wires [remove]
+
break_wires [remove]
Break wires at selected instance pins
if '1' is given as 'remove' parameter broken wires that are
all inside selected instances will be deleted
@@ -603,7 +603,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
check_symbols
List all used symbols in current schematic and warn if some symbol is newer
check_unique_names [1|0]
- Check if all instances have a unique refdes (name attribute in xschem),
+ Check if all instances have a unique refdes (name attribute in xschem),
highlight such instances. If second parameter is '1' rename duplicates
closest_object
returns index of closest object to mouse coordinates
@@ -613,8 +613,8 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
(valid for line, poly, rect, arc)
n is the index of the object in the xschem array
example:
- $ after 3000 {set obj [xschem closest_object]}
- (after 3s)
+ $ after 3000 {set obj [xschem closest_object]}
+ (after 3s)
$ puts $obj
line 4 19
circle
@@ -660,14 +660,14 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
cut
Cut selection to clipboard
debug n
- Set xschem in debug mode.'n' is the debug level
+ Set xschem in debug mode.'n' is the debug level
(0=no debug). Higher levels yield more debug info.
delete
Delete selection
delete_files
Bring up a file selector the user can use to delete files
descend [n] [notitle]
- Descend into selected component instance. Optional number 'n' specifies the
+ Descend into selected component instance. Optional number 'n' specifies the
instance number to descend into for vector instances (default: 0).
0 or 1: leftmost instance, 2: second leftmost instance, ...
-1: rightmost instance,-2: second rightmost instance, ...
@@ -675,7 +675,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
descend_symbol
Descend into the symbol view of selected component instance
destroy_all [force]
- Close all additional windows/.tabs. If 'force' is given do not ask for
+ Close all additional windows/tabs. If 'force' is given do not ask for
confirmation for changed schematics
Returns the remaining # of windows/tabs in addition to main window/tab
display_hilights [nets|instances]
@@ -684,10 +684,10 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
if 'nets' is specified list only net highlights
draw_graph [n] [flags]
Redraw graph rectangle number 'n'.
- If the optional 'flags' integer is given it will be used as the
+ If the optional 'flags' integer is given it will be used as the
flags bitmask to use while drawing (can be used to restrict what to redraw)
drc_check [i]
- Perform DRC rulecheck of instances.
+ Perform DRC rulecheck of instances.
if i is specified do check of specified instance
otherwise check all instances in current schematic.
edit_file
@@ -730,15 +730,15 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
find_nth string sep quote keep_quote n
Find n-th field string separated by characters in sep. 1st field is in position 1
do not split quoted fields (if quote characters are given) and return unquoted.
- xschem find_nth {aaa,bbb,ccc,ddd} {,} 2 --> bbb
+ xschem find_nth {aaa,bbb,ccc,ddd} {,} 2 --> bbb
xschem find_nth {aaa, "bbb, ccc" , ddd} { ,} {"} 2 --> bbb, ccc
flip [x0 y0]
- Flip selection horizontally around point x0 y0.
+ Flip selection horizontally around point x0 y0.
if x0, y0 not given use mouse coordinates
flip_in_place
Flip selection horizontally, each object around its center
flipv [x0 y0]
- Flip selection vertically around point x0 y0.
+ Flip selection vertically around point x0 y0.
if x0, y0 not given use mouse coordinates
flipv_in_place
Flip selection vertically, each object around its center
@@ -817,7 +817,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
return result of get_cell function
get_cell_w_ext cell n_dirs
return result of get_cell_w_ext function
- getprop instance|instance_pin|symbol|text ref
+
getprop instance|instance_pin|symbol|text ref
getprop instance inst
Get the full attribute string of 'inst'
@@ -861,17 +861,17 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
getprop wire num attr
Get attribute 'attr' of wire number 'num'
-
+
('inst' can be an instance name or instance number)
('pin' can be a pin name or pin number)
get_sch_from_sym inst [symbol]
- get schematic associated with instance 'inst'
+ get schematic associated with instance 'inst'
if inst==-1 and a 'symbol' name is given get sch associated with symbol
get_tok str tok [with_quotes]
get value of token 'tok' in string 'str'
'with_quotes' (default:0) is an integer passed to get_tok_value()
get_tok_size
- Get length of last looked up attribute name (not its value)
+ Get length of last looked up attribute name (not its value)
if returned value is 0 it means that last searched attribute did not exist
globals
Return various global variables used in the program
@@ -895,8 +895,8 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
if 'drill' is given propagate net highlights through conducting elements
(elements that have the 'propag' attribute on pins )
hilight_instname inst [fast]
- Highlight instance 'inst'
- if 'fast' is specified do not redraw
+ Highlight instance 'inst'
+ if 'fast' is specified do not redraw
'inst' can be an instance name or number
hilight_netname net
Highlight net name 'net'
@@ -904,10 +904,10 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
blend_white|blend_black]
Apply required changes to selected images
invert: invert colors
- white_transp: transform white to transparent color (alpha=0) after invert.
- black_transp: transform black to transparent color (alpha=0) after invert.
- transp_white: transform white to transparent color (alpha=0) after invert.
- transp_black: transform black to transparent color (alpha=0) after invert.
+ white_transp: transform white color to transparent (alpha=0)
+ black_transp: transform black color to transparent (alpha=0)
+ transp_white: transform transparent to white color
+ transp_black: transform transparent to black color
blend_white: blend with white background and remove alpha
blend_black: blend with black background and remove alpha
write_back: write resulting image back into `image_data` attribute
@@ -924,14 +924,14 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
'inst' can be an instance name or number
instance_coord [instance]
Return instance name, symbol name, x placement coord, y placement coord, rotation and flip
- of selected instances
- if 'instance' is given (instance name or number) return data about specified instance
+ of selected instances
+ if 'instance' is given (instance name or number) return data about specified instance
Example:
- xschem [~] xschem instance_coord
+ xschem [~] xschem instance_coord
{R5} {res.sym} 260 260 0 0
{C1} {capa.sym} 150 150 1 1
instance_list
- Return a list of 3-items. Each 3-item is
+ Return a list of 3-items. Each 3-item is
an instance name followed by the symbol reference and symbol type.
Example: xschem instance_list -->
{x1} {sky130_tests/bandgap.sym} {subcircuit}} {...} {...} {...} ...
@@ -945,10 +945,10 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
instance x3 pin PLUS is attached to net LED, pin OUT to net LEVEL and so on...
If 'pin' is given restrict map to only that pin
instance_number inst [n]
- Return the position of instance 'inst' in the instance array
+ Return the position of instance 'inst' in the instance array
If 'n' is given set indicated instance position to 'n'
instance_pin_coord inst attr value
- Return the name and coordinates of pin with
+ Return the name and coordinates of pin with
attribute 'attr' set to 'value' of instance 'inst'
'inst can be an instance name or a number
Example: xschem instance_pin_coord x3 name MINUS --> {MINUS} 600 -840
@@ -958,7 +958,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
instance_pos inst
Get number (position) of instance name 'inst'
instances_to_net net
- Return list of instances names and pins attached to net 'net'
+ Return list of instances names and pins attached to net 'net'
Example: xschem instances_to_net PANEL
--> { {Vsw} {plus} {580} {-560} } { {p2} {p} {660} {-440} }
{ {Vpanel1} {minus} {600} {-440} }
@@ -1004,7 +1004,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
'symbol': do not load symbols (used if loading a symbol instead of a schematic)
'nofullzoom': do not do a full zoom on new schematic.
load_new_window [f]
- Load schematic in a new tab/window. If 'f' not given prompt user
+ Load schematic in a new tab/window. If 'f' not given prompt user
if 'f' is given as empty '{}' then open untitled.sch
log f
If 'f' is given output stderr messages to file 'f'
@@ -1017,7 +1017,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
Returns 0, 1, 2, 3 for logic levels 0, 1, X, Z or nothing if no net found.
logic_set_net net_name n [num]
set 'net_name' to logic level 'n' 'num' times.
- 'n':
+ 'n':
0 set to logic value 0
1 set to logic value 1
2 set to logic value X
@@ -1026,7 +1026,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
the 'num' parameter is essentially useful only with 'toggle' (-1) value
logic_set n [num]
set selected nets, net labels or pins to logic level 'n' 'num' times.
- 'n':
+ 'n':
0 set to logic value 0
1 set to logic value 1
2 set to logic value X
@@ -1035,11 +1035,11 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
the 'num' parameter is essentially useful only with 'toggle' (-1) value
make_sch
Make a schematic from selected symbol
- make_sch_from_sel
+
make_sch_from_sel
Create an LCC instance from selection and place it instead of selection
also ask if a symbol (.sym) file needs to be created
make_symbol
- From current schematic (circuit.sch) create a symbol (circuit.sym)
+ From current schematic (circuit.sch) create a symbol (circuit.sym)
using ipin.sym, opin.sym, iopin.sym in schematic
to deduce symbol interface pins.
merge [f]
@@ -1051,7 +1051,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
move_objects [dx dy] [kissing] [stretch]
Start a move operation on selection and let user terminate the operation in the GUI
if kissing is given add nets to pins that touch other instances or nets
- if stretch is given stretch connected nets to follow instace pins
+ if stretch is given stretch connected nets to follow instace pins
if dx and dy are given move by that amount.
my_strtok_r str delim quote keep_quote
test for my_strtok_r() function
@@ -1064,7 +1064,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
Highlight nets attached to selected symbols with
a different name than symbol pin
netlist [-messages] [filename]
- do a netlist of current schematic in currently defined netlist format
+ do a netlist of current schematic in currently defined netlist format
if 'filename'is given use specified name for the netlist
if 'filename' contains path components place the file in specified path location.
if only a name is given and no path ('/') components are given use the
@@ -1072,13 +1072,13 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
This means that 'xschem netlist test.spice' and 'xschem netlist ./test.spice'
will create the netlist in different places.
netlisting directory is reset to previous setting after completing this command
- If -messages is given return the ERC messages instead of just a fail (1)
+ If -messages is given return the ERC messages instead of just a fail (1)
or no fail (0) code.
new_process [f]
Start a new xschem process for a schematic.
If 'f' is given load specified schematic.
new_schematic create|destroy|destroy_all|switch winpath file [draw]
- Open/destroy a new tab or window
+ Open/destroy a new tab or window
create: create new empty window or with 'file' loaded if 'file' given.
The winpath must be given (even {} is ok).
non empty winpath ({1}) will avoid warnings if opening the
@@ -1108,7 +1108,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
paste [x y]
Paste clipboard. If 'x y' not given user should complete placement in the GUI
pinlist inst [attr]
- List all pins of instance 'inst'
+ List all pins of instance 'inst'
if no 'attr' is given return full attribute string,
else return value for attribute 'attr'.
Example: xschem pinlist x3 name
@@ -1123,7 +1123,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
If 'sym_name' not given prompt user
'prop' is the attribute string of the symbol.
If not given take from symbol template attribute.
- place_text
+
place_text
Start a GUI placement of a text object
polygon
Start a GUI placement of a polygon
@@ -1132,7 +1132,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
close: same as destroy but leave the container window.
Used in fileselector to show a schematic preview.
print png|svg|ps|pdf|ps_full|pdf_full img_file [img_x img_y] [x1 y1 x2 y2]
- If img_x and img_y are set to 0 (recommended for svg and ps/pdf)
+ If img_x and img_y are set to 0 (recommended for svg and ps/pdf)
they will be calculated by xschem automatically
if img_x and img_y are given they will set the bitmap size, if
area to export is not given then use the selection boundbox if
@@ -1159,7 +1159,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
of created objects
print_spice_element inst
Print spice raw netlist line for instance (number or name) 'inst'
- propagate_hilights [set clear]
+
propagate_hilights [set clear]
Debug: wrapper to propagate_hilights() function
push_undo
Push current state on undo stack
@@ -1176,7 +1176,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
xschem raw clear [rawfile [type]]
unload given file and type. If type not given delete all type sfrom rawfile
if no file is given unload all raw files.
-
+
xschem raw del name
delete named vector from current raw file
@@ -1216,13 +1216,13 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
return hierarchy level where raw file was loaded or -1 if no raw loaded
xschem raw rawfile
- return raw filename
+ return raw filename
xschem raw sim_type
- return raw loaded simulation type (ac, op, tran, ...)
+ return raw loaded simulation type (ac, op, tran, ...)
xschem raw index node
- get index of simulation variable 'node'.
+ get index of simulation variable 'node'.
Example: raw index v(led) --> 46
xschem raw values node [dset]
@@ -1244,7 +1244,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
data is presented in column format after the header line
First column is sweep (x-axis) variable
Double empty lines start a new dataset
- Single empty lines are ignored
+ Single empty lines are ignored
Datasets can have different # of lines.
new dataset do not start with a header row.
Lines beginning with '#' are comments and ignored
@@ -1260,7 +1260,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
0.0 0.0 1.8 0.3
0.1 0.0 1.5 0.6
... ... ... ...
-
+
xschem raw add varname [expr] [sweep_var]
add a 'varname' vector with all values set to 0 to loaded raw file if expr not given
otherwise initialize data with values calculated from expr.
@@ -1268,8 +1268,8 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
that need it. If sweep_var not given use first raw file variable as sweep variable.
If varname is already existing and expr given recalculate data
Example: xschem raw add power {outm outp - i(@r1[i]) *}
-
- raw_clear
+
+ raw_clear
Unload all simulation raw files
You can use xschem raw clear as well.
raw_read [file] [sim] [sweep1 sweep2]
@@ -1284,11 +1284,11 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
of base64 encoded data from a 'spice_data'
attribute of selected instance
If sim not given read first section found
- rebuild_connectivity
+
rebuild_connectivity
Rebuild logical connectivity abstraction of schematic
- rebuild_selection
+
rebuild_selection
Rebuild selection list
- record_global_node n node
+
record_global_node n node
call the record_global_node function (list of netlist global nodes)
rect [x1 y1 x2 y2] [pos] [propstring] [draw]
if 'x1 y1 x2 y2'is given place recangle on current
@@ -1330,7 +1330,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
else returns the topmost full hierarchy name of selected net/pin/label.
Nets connected to I/O ports are mapped to upper level recursively
rotate [x0 y0]
- Rotate selection around point x0 y0.
+ Rotate selection around point x0 y0.
if x0, y0 not given use mouse coordinates
rotate_in_place
Rotate selected objects around their 0,0 coordinate point
@@ -1361,15 +1361,15 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
Search instances / wires / rects / texts with attribute string containing 'tok'
and value 'val'
search can be exact ('exact') or as a regular expression ('regex')
- select:
+ select:
0 : highlight matching instances
1 : select matching instances
- -1 : unselect matching instances
+ -1 : unselect matching instances
'tok' set as:
- propstring : will search for 'val' in the entire
+ propstring : will search for 'val' in the entire
*instance* attribute string.
cell::propstring : will search for 'val' in the entire
- *symbol* attribute string.
+ *symbol* attribute string.
cell::name : will search for 'val' in the symbol name
cell::<attr> will search for 'val' in symbol attribute 'attr'
example: xschem search regex 0 cell::template GAIN=100
@@ -1388,7 +1388,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
returns 1 if something selected, 0 otherwise
select_all
Selects all objects in schematic
- select_dangling_nets
+
select_dangling_nets
Select all nets/labels that are dangling, ie not attached to any non pin/port/probe components
Returns number of selected items (wires,labels) if danglings found, 0 otherwise
select_hilight_net
@@ -1453,7 +1453,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
If 'tok' set to 'allprops' replace whole instance prop_str with 'val'
If 'val' not given (no attribute value) delete attribute from instance
If 'tok' not given clear completely instance attribute string
- If 'fast' argument if given does not redraw and is not undoable
+ If 'fast' argument if given does not redraw and is not undoable
setprop symbol name tok [val]
Set attribute 'tok' of symbol name 'name' to 'val'
@@ -1480,16 +1480,16 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
If 'fastundo' s given same as above but action is undoable.
simulate [callback]
Run a simulation (start simulator configured as default in
- Tools -> Configure simulators and tools)
+ Tools -> Configure simulators and tools)
If 'callback' procedure name is given execute the procedure when simulation
is finished. all execute(..., id) data is available (id = execute(id) )
A callback prodedure is useful if simulation is launched in background mode
( set sim(spice,1,fg) 0 )
- snap_wire
+
snap_wire
Start a GUI start snapped wire placement (click to start a
wire to closest pin/net endpoint)
str_replace str rep with [escape]
- replace 'rep' with 'with' in string 'str'
+ replace 'rep' with 'with' in string 'str'
if rep not preceeded by an 'escape' character
subst_tok str tok newval
Return string 'str' with 'tok' attribute value replaced with 'newval'
@@ -1497,9 +1497,9 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
When a symbol is selected edit it in a new tab/window if not already open.
If nothing selected open another window of the second schematic (issues a warning).
if 'new_process' is given start a new xschem process
- swap_cursors
+
swap_cursors
swap cursor A (1) and cursor B (2) positions.
- swap_windows
+
swap_windows
swap first and second window in window interface (internal command)
switch [window_path |schematic_name]
Switch context to indicated window path or schematic name
@@ -1507,7 +1507,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
(no tabs/windows present or no matching winpath / schematic name
found).
symbols [n]
- if 'n' given list symbol with name or number 'n', else
+ if 'n' given list symbol with name or number 'n', else
list all used symbols
tab_list
list all windows / tabs with window pathname and associated filename
@@ -1557,7 +1557,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
Example: xschem translate vref {the voltage is @value}
the voltage is 1.8
translate3 str eat_escapes s1 [s2] [s3]
- Translate string 'str' replacing @xxx tokens with values in string s1 or if
+ Translate string 'str' replacing @xxx tokens with values in string s1 or if
not found in string s2 or if not found in string s3
eat_escapes should be either 1 (remove backslashes) or 0 (keep them)
Example: xschem translate3 {the voltage is @value} {name=x12} {name=x1 value=1.8}
@@ -1602,15 +1602,15 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
xcb_info
For debug
zoom_box [x1 y1 x2 y2] [factor]
- Zoom to specified coordinates, if 'factor' is given reduce view (factor < 1.0)
+ Zoom to specified coordinates, if 'factor' is given reduce view (factor < 1.0)
or add border (factor > 1.0)
If no coordinates are given start GUI zoom box operation
zoom_full [center|nodraw|nolinewidth]
- Set full view.
+ Set full view.
If 'center' is given center vire instead of lower-left align
If 'nodraw' is given don't redraw
If 'nolinewidth]' is given don't reset line widths.
- zoom_hilighted
+
zoom_hilighted
Zoom to highlighted objects
zoom_in
Zoom in drawing
@@ -1671,6 +1671,7 @@ C {verilog_timescale.sym} 1050 -100 0 0 {name=s1 timestep="1ns" precision="1ns"
+
diff --git a/src/scheduler.c b/src/scheduler.c
index 4e164ef1..e74b0edc 100644
--- a/src/scheduler.c
+++ b/src/scheduler.c
@@ -2232,10 +2232,10 @@ int xschem(ClientData clientdata, Tcl_Interp *interp, int argc, const char * arg
* blend_white|blend_black]
* Apply required changes to selected images
* invert: invert colors
- * white_transp: transform white to transparent color (alpha=0) after invert.
- * black_transp: transform black to transparent color (alpha=0) after invert.
- * transp_white: transform white to transparent color (alpha=0) after invert.
- * transp_black: transform black to transparent color (alpha=0) after invert.
+ * white_transp: transform white color to transparent (alpha=0)
+ * black_transp: transform black color to transparent (alpha=0)
+ * transp_white: transform transparent to white color
+ * transp_black: transform transparent to black color
* blend_white: blend with white background and remove alpha
* blend_black: blend with black background and remove alpha
* write_back: write resulting image back into `image_data` attribute