From 8dde6c7ed39650fc2b1f7634f1ae655f8a3a7257 Mon Sep 17 00:00:00 2001 From: stefan schippers Date: Fri, 28 Apr 2023 17:17:00 +0200 Subject: [PATCH] remove unused xschemrc file --- xschem_library/inst_sch_select/xschemrc | 433 ------------------------ 1 file changed, 433 deletions(-) delete mode 100644 xschem_library/inst_sch_select/xschemrc diff --git a/xschem_library/inst_sch_select/xschemrc b/xschem_library/inst_sch_select/xschemrc deleted file mode 100644 index 8dcdbf27..00000000 --- a/xschem_library/inst_sch_select/xschemrc +++ /dev/null @@ -1,433 +0,0 @@ -#### xschemrc system configuration file - -#### values may be overridden by user's ~/.xschem/xschemrc configuration file -#### or by project-local ./xschemrc - -########################################################################### -#### XSCHEM INSTALLATION DIRECTORY: XSCHEM_SHAREDIR -########################################################################### -#### Normally there is no reason to set this variable if using standard -#### installation. Location of files is set at compile time but may be overridden -#### with following line: -# set XSCHEM_SHAREDIR $env(HOME)/share/xschem - -#### older xschem versions -# set XSCHEM_SHAREDIR $env(HOME)/x/xschem-r2363/src -# set XSCHEM_SHAREDIR $env(HOME)/xschem - - - -# libptr: -# set to noop do nothing -# set to empty for empty XSCHEM_LIBRARY_PATH -# set to sky130 for sky130 schematics -# set to repo to edit directly in xschem-repo workspace -# set to share for installed schematics (share/doc/xschem) -# set to xschem for ~/xschem/xschem_library -set XSCHEM_LIBRARY_PATH {} -append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/xschem_library/devices - -append XSCHEM_LIBRARY_PATH :~/.xschem/xschem_library/library_LCC_stefan -append XSCHEM_LIBRARY_PATH :~/.xschem/xschem_library -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/logic -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/examples -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/binto7seg -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/ngspice -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/xschem_simulator -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/rom8k -append XSCHEM_LIBRARY_PATH :$env(HOME)/xschem-repo/trunk/xschem_library/pcb - -append XSCHEM_LIBRARY_PATH :[pwd] - - -########################################################################### -#### XSCHEM SYSTEM-WIDE DESIGN LIBRARY PATHS: XSCHEM_LIBRARY_PATH -########################################################################### -#### If unset xschem starts with XSCHEM_LIBRARY_PATH set to the default, typically: -# /home/schippes/.xschem/xschem_library -# /home/schippes/share/xschem/xschem_library/devices -# /home/schippes/share/doc/xschem/examples -# /home/schippes/share/doc/xschem/ngspice -# /home/schippes/share/doc/xschem/logic -# /home/schippes/share/doc/xschem/xschem_simulator -# /home/schippes/share/doc/xschem/binto7seg -# /home/schippes/share/doc/xschem/pcb -# /home/schippes/share/doc/xschem/rom8k - -#### For testing in build src directory -#### if unset following paths are set and maintained if existing: -# -# ~/.xschem/xschem_library -# ../xschem_library/devices -# ../xschem_library/examples -# ../xschem_library/ngspice -# ../xschem_library/logic -# ../xschem_library/xschem_simulator -# ../xschem_library/binto7seg -# ../xschem_library/pcb -# ../xschem_library/rom8k - -#### For testing after installation: uncomment following lines -# set xschem_doc_dir [file dirname ${XSCHEM_SHAREDIR}]/doc/xschem -# set XSCHEM_LIBRARY_PATH {} -# append XSCHEM_LIBRARY_PATH :~/.xschem/xschem_library -# append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/xschem_library/devices -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/examples -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/ngspice -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/xschem_simulator -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/rom8k -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/logic -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/pcb -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/binto7seg -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/symgen -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/xTAG -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/rulz-r8c33 -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/gschem_import -# append XSCHEM_LIBRARY_PATH :${xschem_doc_dir}/gschem_import/sym - -#### For Windows, use ; instead of :, and enclosed pathname with "" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/devices" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/examples" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/ngspice" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/xschem_simulator" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/rom8k" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/logic" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/pcb" -# append XSCHEM_LIBRARY_PATH ";${XSCHEM_SHAREDIR}/../xschem_library/binto7seg" - -########################################################################### -#### SET CUSTOM COLORS FOR XSCHEM LIBRARIES MATCHING CERTAIN PATTERNS -########################################################################### -#### each line contains a dircolor(pattern) followed by a color -#### color can be an ordinary name (grey, brown, blue) or a hex code {#77aaff} -#### hex code must be enclosed in braces -#### these are the defaults: -# set dircolor(/share/xschem/) red -# set dircolor(/share/doc/xschem/) {#338844} - -########################################################################### -#### WINDOW TO OPEN ON STARTUP: XSCHEM_START_WINDOW -########################################################################### -#### Start without a design if no filename given on command line: -#### To avoid absolute paths, use a path that is relative to one of the -#### XSCHEM_LIBRARY_PATH directories. Default: empty -# set XSCHEM_START_WINDOW {0_examples_top.sch} - -########################################################################### -#### DIRECTORY WHERE SIMULATIONS, NETLIST AND SIMULATOR OUTPUTS ARE PLACED -########################################################################### -#### If unset $USER_CONF_DIR/simulations is assumed (normally ~/.xschem/simulations) -# set netlist_dir $env(HOME)/.xschem/simulations - -########################################################################### -#### NETLIST AND HIERARCHICAL PRINT EXCLUDE PATTERNS -########################################################################### -#### xschem_libs is a list of patterns of cells to exclude from netlisting. -#### Matching is done as regular expression on full cell path -#### Example: -#### set xschem_libs { {/cmoslib/} {/analoglib/.*pass} buffer } -#### in this case all schematic cells of directory cmoslib and cells containing -#### /analoglib/...pass and buffer will be excluded from netlisting -#### default value: empty -# set xschem_libs {} -#### noprint_libs is a list with same rules as for xschem_libs. This -#### variable controls hierarchical print -#### default value: empty -# set noprint_libs {} -#### nolist_libs is a list with same rules as for xschem_libs. This -#### variable controls cell listing in procedure list_hierarchy. -#### default value: empty -# set nolist_libs {} - -########################################################################### -#### CHANGE DEFAULT [] WITH SOME OTHER CHARACTERS FOR BUSSED SIGNALS -#### IN SPICE NETLISTS (EXAMPLE: DATA[7] --> DATA<7>) -########################################################################### -#### default: empty (use xschem default, [ ]) -# set bus_replacement_char {<>} -#### for XSPICE: replace square brackets as the are used for XSPICE vector nodes. -# set bus_replacement_char {__} - -########################################################################### -#### SOME DEFAULT BEHAVIOR -########################################################################### -#### Allowed values: spice, verilog, vhdl, tedax, default: spice -# set netlist_type spice - -#### Some netlisting options (these are the defaults) -# set verilog_2001 1 - -#### to use a fixed line with set change_lw to 0 and set some value to line_width -#### these are the defaults -# set line_width 0 -# set change_lw 1 - -#### allow color postscript and svg exports. Default: 1, enable color -# set color_ps 1 - -#### initial size of xschem window you can specify also position with (wxh+x+y) -#### this is the default: -set initial_geometry {750x500} - -#### if set to 0, when zooming out allow the viewport do drift toward the mouse position, -#### allowing to move away by zooming / unzooming with mouse wheel -#### default setting: 0 -# set unzoom_nodrift 0 - -#### if set to 1 full zoom will center the drawing instead of anhoring to lower -#### left corner. Default: 0 -set zoom_full_center 1 - -#### if set to 1 allow to place multiple components with same name. -#### Warning: this is normally not allowed in any simulation netlist. -#### default: 0, do not allow place multiple elements with same name (refdes) -# set disable_unique_names 0 - -#### if set to 1 continue drawing lines / wires after click -#### default: 0 -# set persistent_command 1 - -#### if set to 1 a wire is inserted when separating components that are -#### connected by pins. Default: not enabled (0) -# set connect_by_kissing 1 - -#### if set to 1 automatically join/trim wires while editing -#### this may slow down on rally big designs. Can be disabled via menu -#### default: 0 -# set autotrim_wires 0 - -#### set widget scaling (mainly for font display), this is useful on 4K displays -#### default: unset (tk uses its default) > 1.0 ==> bigger -set tk_scaling 1.1 - -#### use the tclreadline package if available , Default: 1 (enabled). -# set use_tclreadline 1 - -#### disable some symbol layers. Default: none, all layers are visible. -# set enable_layer(5) 0 ;# example to disable pin red boxes - -#### enable to scale grid point size as done with lines at close zoom, default: 0 -set big_grid_points 1 - -#### enable grouping contiguous bits of bus slices in net->pin instance -#### assignments for verilog netlists. Default: disabled (0) -# set verilog_bitblast 0 - -#### allow searching the full search path for schematics associated to symbols -#### instead of looking only in symbol directory. Default: disabled (0). -# set search_schematic 0 - -#### focus the schematic window if mouse goes over it, even if a dialog box -#### is displayed, without needing to click. -#### This allows to move/zoom/pan the schematic while editing attributes. -#### Clicking in the schematic window usually closes the dialog box or starts -#### editing a new component if clicking on a new component. -#### default: enabled (1) -set autofocus_mainwindow 1 - -#### set component browser always above drawing canvas. -#### default: enabled (1) -# set component_browser_on_top 0 - -# -########################################################################### -#### EXPORT FORMAT TRANSLATORS, PNG AND PDF -########################################################################### -#### command to translate xpm to png; (assumes command takes source -#### and dest file as arguments, example: gm convert plot.xpm plot.png) -#### default: {gm convert} -#### Windows ghostscript uses gswin64c -# set to_png {gswin64c -sDEVICE=png16m -o} -# set to_png {gm convert} - -#### command to translate ps to pdf; (assumes command takes source -#### and dest file as arguments, example: ps2pdf plot.ps plot.pdf) -#### default: ps2pdf -#### Windows ghostscript uses gswin64c -# set to_pdf {gswin64c -sDEVICE=pdfwrite -o} -# set to_pdf ps2pdf -set to_pdf {ps2pdf -dAutoRotatePages=/None} - - -########################################################################### -#### UNDO: SAVE ON DISK OR KEEP IN MEMORY -########################################################################### -#### Alloved: 'disk'or 'memory'. -#### Saving undo on disk is safer but slower on extremely big schematics. -#### In most cases you won't notice any delay. Undo on disk allows previous -#### state recovery in case of crashes. In-memory undo is extremely fast -#### but should a crash occur everything is lost. -#### It is highly recommended to keep undo on disk. -#### Default: disk -# set undo_type disk - -########################################################################### -#### CUSTOM GRID / SNAP VALUE SETTINGS -########################################################################### -#### Warning: changing these values will likely break compatibility -#### with existing symbol libraries. Defaults: grid 20, snap 10. -# set cadgrid 20 -# set cadsnap 10 - -########################################################################### -#### CUSTOM COLORS MAY BE DEFINED HERE -########################################################################### -# set cadlayers 22 -# set light_colors { -# "#ffffff" "#0044ee" "#aaaaaa" "#222222" "#229900" -# "#bb2200" "#00ccee" "#ff0000" "#888800" "#00aaaa" -# "#880088" "#00ff00" "#0000cc" "#666600" "#557755" -# "#aa2222" "#7ccc40" "#00ffcc" "#ce0097" "#d2d46b" -# "#ef6158" "#fdb200" } - -# set dark_colors { -# "#000000" "#00ccee" "#3f3f3f" "#cccccc" "#88dd00" -# "#bb2200" "#00ccee" "#ff0000" "#ffff00" "#ffffff" -# "#ff00ff" "#00ff00" "#0000cc" "#aaaa00" "#aaccaa" -# "#ff7777" "#bfff81" "#00ffcc" "#ce0097" "#d2d46b" -# "#ef6158" "#fdb200" } - -########################################################################### -#### CAIRO STUFF -########################################################################### -#### Scale all fonts by this number -# set cairo_font_scale 1.0 - -#### default for following two is 0.85 (xscale) and 0.88 (yscale) to -#### match cairo font spacing -# set nocairo_font_xscale 1.0 -#### set nocairo_font_yscale 1.0 - -#### Scale line spacing by this number -# set cairo_font_line_spacing 1.0 - -#### Specify a font -# set cairo_font_name {Sans-Serif} -# set svg_font_name {Sans-Serif} - -#### Lift up text by some zoom-corrected pixels for -#### better compatibility wrt no cairo version. -#### Useful values in the range [-1, 3] -# set cairo_vert_correct 0 -# set nocairo_vert_correct 0 - -########################################################################### -#### KEYBINDINGS -########################################################################### -#### General format for specifying a replacement for a keybind -#### Replace Ctrl-q with Escape (so you wont kill the program) -# set replace_key(Control-q) Escape - -#### swap w and W keybinds; Always specify Shift for capital letters -# set replace_key(Shift-W) Key-w -# set replace_key(Key-w) Shift-W - -########################################################################### -#### TERMINAL -########################################################################### -#### default for linux: xterm -# set terminal {xterm -geometry 100x35 -fn 9x15 -bg black -fg white -cr white -ms white } -#### lxterminal is not OK since it will not inherit env vars: -#### In order to reduce memory usage and increase the performance, all instances -#### of the lxterminal are sharing a single process. LXTerminal is part of LXDE - -########################################################################### -#### EDITOR -########################################################################### -#### editor must not detach from launching shell (-f mandatory for gvim) -#### default for linux: gvim -f -# set editor {gvim -f -geometry 90x28} -# set editor { xterm -geometry 100x40 -e nano } -# set editor { xterm -geometry 100x40 -e pico } - -#### For Windows -# set editor {notepad.exe} - -########################################################################### -#### SHOW ERC INFO WINDOW (erc errors, warnings etc) -########################################################################### -#### default: 0 (can be enabled by menu) -# set show_infowindow 0 - -########################################################################### -#### TCP CONNECTION WITH GAW -########################################################################### -#### set gaw address for socket connection: {host port} -#### default: set to localhost, port 2020 -# set gaw_tcp_address {localhost 2020} - -########################################################################### -#### XSCHEM LISTEN TO TCP PORT -########################################################################### -#### set xschem listening port; default: not enabled -set xschem_listen_port 2021 - -########################################################################### -#### BESPICE WAVE SOCKET CONNECTION -########################################################################### -#### set bespice wave listening port; default: not enabled -set bespice_listen_port 2022 - -########################################################################### -#### TCL FILES TO LOAD AT STARTUP -########################################################################### -#### list of tcl files to preload. -# lappend tcl_files ${XSCHEM_SHAREDIR}/change_index.tcl -lappend tcl_files ${XSCHEM_SHAREDIR}/ngspice_backannotate.tcl -# lappend tcl_files $env(HOME)/.xschem/bindings.tcl -########################################################################### -#### WEB URL DOWNLOAD HELPER APPLICATION -########################################################################### -#### used to download files from web: default: {curl -f -s -O} -# set download_url_helper {curl -f -s -O} -# set download_url_helper {wget -N --quiet} - -########################################################################### -#### XSCHEM TOOLBAR -########################################################################### -#### default: not enabled. -set toolbar_visible 1 -set toolbar_horiz 1 - -########################################################################### -#### TABBED WINDOWS -########################################################################### -# default: not enabled. Interface can be changed runtime if only one window -# or tab is open. -set tabbed_interface 1 - -########################################################################### -#### CASE INSENSITIVE SYMBOL LOOKUP -########################################################################### -## this option might be useful on filesystems that are case insensitive and -## on designs ported from windows where case of file names does not matter. -## if this option is set symbol lookup will be case insensitive, -## so a symbol reference 'AMPLI.SYM' will match with 'ampli.sym' or -## Amply.sym on disk. File system must be case insensitive for this to work, -## like FAT32 or NTFS. -## Do not set this option if you don't know what you are doing. -## Default: not enabled (0) -# set case_insensitive 1 - -########################################################################### -#### HIDE GRAPHS IF NO SPICE DATA LOADED -########################################################################### -## if enabled graphs will be hidden if no data is loaded. -## default: not enabled (0) -set hide_empty_graphs 0 - -########################################################################### -#### SHOW HIDDEN TEXTS -########################################################################### -## This option shows text objects even if they have attribute 'hide=true' set -## default: 0 (not set) -# set show_hidden_texts 1 - -########################################################################### -#### LIVE BACKANNOTATION OF DATA AT CURSOR 2 (B) POSITION -########################################################################### -## if enabled will backannotate values in schematic at cursor 'b' position -## in graph. Default: not enabled (0) -set live_cursor2_backannotate 1 -