// DESCRIPTION: Verilator: Verilog Test module
//
// This file ONLY is placed under the Creative Commons Public Domain.
// SPDX-FileCopyrightText: 2003 Wilson Snyder
// SPDX-License-Identifier: CC0-1.0

module t (  /*AUTOARG*/
    // Inputs
    clk
);

  input clk;

  reg [7:0] cyc;
  initial cyc = 0;
  reg [7:0] padd;
  reg dsp_ph1, dsp_ph2, dsp_reset;

  /*AUTOWIRE*/
  // Beginning of automatic wires (for undeclared instantiated-module outputs)
  wire [7:0] out;  // From dspchip of t_dspchip.v
  // End of automatics

  t_dspchip dspchip (  /*AUTOINST*/
      // Outputs
      .out(out[7:0]),
      // Inputs
      .dsp_ph1(dsp_ph1),
      .dsp_ph2(dsp_ph2),
      .dsp_reset(dsp_reset),
      .padd(padd[7:0])
  );

  always @(posedge clk) begin
    $write("cyc %d\n", cyc);
    if (cyc == 8'd0) begin
      cyc <= 8'd1;
      dsp_reset <= 0;  // Need a posedge
      padd <= 0;
    end
    else if (cyc == 8'd20) begin
      $write("*-* All Finished *-*\n");
      $finish;
    end
    else begin
      cyc <= cyc + 8'd1;
      dsp_ph1 <= ((cyc & 8'd3) == 8'd0);
      dsp_ph2 <= ((cyc & 8'd3) == 8'd2);
      dsp_reset <= (cyc == 8'd1);
      padd <= cyc;
      //$write("[%0t] cyc %d  %x->%x\n", $time, cyc, padd, out);
      case (cyc)
        default: $stop;
        8'd01: ;
        8'd02: ;
        8'd03: ;
        8'd04: ;
        8'd05: ;
        8'd06: ;
        8'd07: ;
        8'd08: ;
        8'd09: if (out !== 8'h04) $stop;
        8'd10: if (out !== 8'h04) $stop;
        8'd11: if (out !== 8'h08) $stop;
        8'd12: if (out !== 8'h08) $stop;
        8'd13: if (out !== 8'h00) $stop;
        8'd14: if (out !== 8'h00) $stop;
        8'd15: if (out !== 8'h00) $stop;
        8'd16: if (out !== 8'h00) $stop;
        8'd17: if (out !== 8'h0c) $stop;
        8'd18: if (out !== 8'h0c) $stop;
        8'd19: if (out !== 8'h10) $stop;
      endcase
    end
  end

endmodule

module t_dspchip (  /*AUTOARG*/
    // Outputs
    out,
    // Inputs
    dsp_ph1,
    dsp_ph2,
    dsp_reset,
    padd
);
  input dsp_ph1, dsp_ph2, dsp_reset;
  input [7:0] padd;
  output [7:0] out;

  wire dsp_ph1, dsp_ph2;
  wire [7:0] out;
  wire pla_ph1, pla_ph2;
  wire out1_r;
  wire [7:0] out2_r, padd;
  wire clk_en;

  t_dspcore t_dspcore (  /*AUTOINST*/
      // Outputs
      .out1_r(out1_r),
      .pla_ph1(pla_ph1),
      .pla_ph2(pla_ph2),
      // Inputs
      .dsp_ph1(dsp_ph1),
      .dsp_ph2(dsp_ph2),
      .dsp_reset(dsp_reset),
      .clk_en(clk_en)
  );
  t_dsppla t_dsppla (  /*AUTOINST*/
      // Outputs
      .out2_r(out2_r[7:0]),
      // Inputs
      .pla_ph1(pla_ph1),
      .pla_ph2(pla_ph2),
      .dsp_reset(dsp_reset),
      .padd(padd[7:0])
  );

  assign out = out1_r ? 8'h00 : out2_r;
  assign clk_en = 1'b1;

endmodule

module t_dspcore (  /*AUTOARG*/
    // Outputs
    out1_r,
    pla_ph1,
    pla_ph2,
    // Inputs
    dsp_ph1,
    dsp_ph2,
    dsp_reset,
    clk_en
);
  input dsp_ph1, dsp_ph2, dsp_reset;
  input clk_en;
  output out1_r, pla_ph1, pla_ph2;

  wire dsp_ph1, dsp_ph2, dsp_reset;
  wire pla_ph1, pla_ph2;
  reg out1_r;

  always @(posedge dsp_ph1 or posedge dsp_reset) begin
    if (dsp_reset) out1_r <= 1'h0;
    else out1_r <= ~out1_r;
  end

  assign pla_ph1 = dsp_ph1;
  assign pla_ph2 = dsp_ph2 & clk_en;

endmodule

module t_dsppla (  /*AUTOARG*/
    // Outputs
    out2_r,
    // Inputs
    pla_ph1,
    pla_ph2,
    dsp_reset,
    padd
);
  input pla_ph1, pla_ph2, dsp_reset;
  input [7:0] padd;
  output [7:0] out2_r;

  wire pla_ph1, pla_ph2, dsp_reset;
  wire [7:0] padd;
  reg [7:0] out2_r;

  reg [7:0] latched_r;

  always @(posedge pla_ph1 or posedge dsp_reset) begin
    if (dsp_reset) latched_r <= 8'h00;
    else latched_r <= padd;
  end

  always @(posedge pla_ph2 or posedge dsp_reset) begin
    if (dsp_reset) out2_r <= 8'h00;
    else out2_r <= latched_r;
  end

endmodule