The main goal of this patch is to enable splitting the full and
incremental tracing functions into multiple functions, which can then be
run in parallel at a later stage. It also simplifies further
experimentation as all of the interesting trace code construction now
happens in V3Trace. No functional change is intended by this patch, but
there are some implementation changes in the generated code.
Highlights:
- Pass symbol table directly to trace callbacks for simplicity.
- A new traceRegister function is generated which adds each trace
function as an individual callback, which means we can have multiple
callbacks for each trace function type.
- A new traceCleanup function is generated which clears the activity
flags, as the trace callbacks might be implemented as multiple functions.
- Re-worked sub-function handling so there is no separate sub-function
for each trace activity class. Sub-functions are generate when required
by splitting.
- traceFull/traceChg are now created in V3Trace rather than V3TraceDecl,
this requires carrying the trace value tree in TraceDecl until it
reaches V3Trace where the TraceInc nodes are created (previously a
TraceInc was also created in V3TraceDecl which carries the value).
Use SIMD intrinsics to render VCD traces.
I have measured 10-40% single threaded performance increase with VCD
tracing on SweRV EH1 and lowRISC Ibex using SSE2 intrinsics to render
the trace. Also helps a tiny bit with FST, but now almost all of the FST
overhead is in the FST library.
I have reworked the tracing routines to use more precisely sized
arguments. The nice thing about this is that the performance without the
intrinsics is pretty much the same as it was before, as we do at most 2x
as much work as necessary, but in exchange there are no data dependent
branches at all.
Convert trace buffer to 32-bit entries, rather than a union containing a
pointer type. Also tweaked trace entry layouts for a bit more
performance. This gains another 10% on SweRV EH1 CoreMark.
- Change templated trace routines to branch table.
Removed templating from trace chgBus and fullBus and replaced them with
a branch table like the other there is a very small (< 1%) penalty for
this on SwerRV EH1 CoreMark, but this is less than the variability of
disk IO so it's worth it to keep the code simpler and smaller.
- Prefetch VCD suffix buffer at the top of emit*
- Increase ILP in VCD emit* routines
- Use a 64-bit unaligned store to emit the VCD suffix (on x86 only)
The performance difference with these is very small, but the changes
hopefully make this code more performance-portable across various
micro-architectures.
The --trace-threads option can now be used to perform tracing on a
thread separate from the main thread when using VCD tracing (with
--trace-threads 1). For FST tracing --trace-threads can be 1 or 2, and
--trace-fst --trace-threads 1 is the same a what --trace-fst-threads
used to be (which is now deprecated).
Performance numbers on SweRV EH1 CoreMark, clang 6.0.0, Intel i7-3770 @
3.40GHz, IO to ramdisk, with numactl set to schedule threads on different
physical cores. Relative speedup:
--trace -> --trace --trace-threads 1 +22%
--trace-fst -> --trace-fst --trace-threads 1 +38% (as --trace-fst-thread)
--trace-fst -> --trace-fst --trace-threads 2 +93%
Speed relative to --trace with no threaded tracing:
--trace 1.00 x
--trace --trace-threads 1 0.82 x
--trace-fst 1.79 x
--trace-fst --trace-threads 1 1.23 x
--trace-fst --trace-threads 2 0.87 x
This means FST tracing with 2 extra threads is now faster than single
threaded VCD tracing, and is on par with threaded VCD tracing. You do
pay for it in total compute though as --trace-fst --trace-threads 2 uses
about 240% CPU vs 150% for --trace-fst --trace-threads 1, and 155% for
--trace --trace threads 1. Still for interactive use it should be
helpful with large designs.
Includes `timescale, $printtimescale, $timeformat.
VL_TIME_MULTIPLIER, VL_TIME_PRECISION, VL_TIME_UNIT have been removed
and the time precision must now match the SystemC time precision.
To get closer behavior to older versions, use e.g. --timescale-override
"1ps/1ps".
* Improve tracing performance.
Various tactics used to improve performance of both VCD and FST tracing:
- Both: Change tracing functions to templates to take variable widths as
template parameters. For VCD, subsequently specialize these to the
values used by Verilator. This avoids redundant instructions and hard
to predict branches.
- Both: Check for value changes via direct pointer access into the
previous signal value buffer. This eliminates a lot of simple pointer
arithmetic instructions form the tracing code.
- Both: Verilator provides clean input, no need to mask out used bits.
- VCD: pre-compute identifier codes and use memory copy instead of
re-computing them every time a code is emitted. This saves a lot of
instructions and hard to predict branches. The added D-cache misses
are cheaper than the removed branches/instructions.
- VCD: re-write the routines emitting the changes to be more efficient.
- FST: Use previous signal value buffer the same way as the VCD tracing
code, and only call the FST API when a change is detected.
Performance as measured on SweRV EH1, with the pre-canned CoreMark
benchmark running from DCCM/ICCM, clang 6.0.0, Intel i7-3770 @ 3.40GHz,
and IO to ramdisk:
+--------------+---------------+----------------------+
| VCD | FST | FST separate thread |
| (--trace) | (--trace-fst) | (--trace-fst-thread) |
------------+-----------------------------------------------------+
Before | 30.2 s | 121.1 s | 69.8 s |
============+==============+===============+======================+
After | 24.7 s | 45.7 s | 32.4 s |
------------+--------------+---------------+----------------------+
Speedup | 22 % | 256 % | 215 % |
------------+--------------+---------------+----------------------+
Rel. to VCD | 1 x | 1.85 x | 1.31 x |
------------+--------------+---------------+----------------------+
In addition, FST trace size for the above reduced by 48%.
The intention was that all subclasses of AstNode which are
intermediate must be abstract as well and called AstNode*. This was
violated recently by 28b9db1903. This
patch restores that property by:
- Renaming AstFile to AstNodeFile
- Introducing AstNodeSimpleText as the common base of AstText and
AstTextBlock, rather than AstTextBlock deriving from AstText.
* Add VL_OVERRIDE macro so that compiler can tell my typo when trying to override a function.
* Mark visit() with VL_OVERRIDE. No functional change intended.
Add very basic support for vpiModule. Basically it allows to traverse
the module tree to find a variable etc. It does not support more than
vpi_iterate and vpi_scan for vpiModule along basic operations like
vpi_get_str on vpiModule.
The support is added non-intrusively to non-VPI verilator runs. It
essentially:
- Tracks the creation of cell instances and keeps them alive until
the emit phase. They are there converted to scopes if modules.
- Emits empty (don't add anything during construction)
VerilatedScopes for all inlined modules, only for those inlined
modules that are on the hierarchical path to public variables.
- Adds VerilatedHierarchy as abstraction to structure of the
scopes. It is only created for VPI designs. It allows to traverse
the hierarchy from the top (NULL).
Signed-off-by: Stefan Wallentowitz <stefan@wallentowitz.de>
Signed-off-by: Wilson Snyder <wsnyder@wsnyder.org>
Wilson Snyder
Geza Lore
Stephen Henry
Yossi Nivin
Yutetsu TAKATSUKASA
Pieter Kapsenberg
Todd Strader
Stefan Wallentowitz